From: Brian Norris Date: Tue, 5 Jan 2016 18:39:45 +0000 (-0800) Subject: mtd: nand: assign reasonable default name for NAND drivers X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f7a8e38f07a17be90758559fe66fe7337096053f;p=linux-beck.git mtd: nand: assign reasonable default name for NAND drivers Commits such as commit 853f1c58c4b2 ("mtd: nand: omap2: show parent device structure in sysfs") attempt to rely on the core MTD code to set the MTD name based on the parent device. However, nand_base tries to set a different default name according to the flash name (e.g., extracted from the ONFI parameter page), which means NAND drivers will never make use of the MTD defaults. This is not the intention of commit 853f1c58c4b2. This results in problems when trying to use the cmdline partition parser, since the MTD name is different than expected. Let's fix this by providing a default NAND name, where possible. Note that this is not really a great default name in the long run, since this means that if there are multiple MTDs attached to the same controller device, they will have the same name. But that is an existing issue and requires future work on a better controller vs. flash chip abstraction to fix properly. Fixes: 853f1c58c4b2 ("mtd: nand: omap2: show parent device structure in sysfs") Reported-by: Heiko Schocher Signed-off-by: Brian Norris Reviewed-by: Boris Brezillon Tested-by: Heiko Schocher Cc: Heiko Schocher Cc: Frans Klaver Cc: --- diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 928081bbdafd..50514f2501bb 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -3996,6 +3996,9 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, if (ret) return ret; + if (!mtd->name && mtd->dev.parent) + mtd->name = dev_name(mtd->dev.parent); + /* Set the default functions */ nand_set_defaults(chip, chip->options & NAND_BUSWIDTH_16);