From: Laurent Pinchart Date: Mon, 28 Oct 2013 22:49:23 +0000 (+0100) Subject: i2c: sh_mobile: Convert to clk_prepare/unprepare X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f887605d25c1514b06b1a0e0477f85f27f23664d;p=linux-beck.git i2c: sh_mobile: Convert to clk_prepare/unprepare Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and clk_disable_unprepare() to get ready for the migration to the common clock framework. Signed-off-by: Laurent Pinchart Signed-off-by: Wolfram Sang --- diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 55110ddbed1f..1d79585ba4b3 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -235,7 +235,7 @@ static void sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd) int offset; /* Get clock rate after clock is enabled */ - clk_enable(pd->clk); + clk_prepare_enable(pd->clk); i2c_clk_khz = clk_get_rate(pd->clk) / 1000; i2c_clk_khz /= pd->clks_per_count; @@ -270,14 +270,14 @@ static void sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd) pd->icic &= ~ICIC_ICCHB8; out: - clk_disable(pd->clk); + clk_disable_unprepare(pd->clk); } static void activate_ch(struct sh_mobile_i2c_data *pd) { /* Wake up device and enable clock */ pm_runtime_get_sync(pd->dev); - clk_enable(pd->clk); + clk_prepare_enable(pd->clk); /* Enable channel and configure rx ack */ iic_set_clr(pd, ICCR, ICCR_ICE, 0); @@ -300,7 +300,7 @@ static void deactivate_ch(struct sh_mobile_i2c_data *pd) iic_set_clr(pd, ICCR, 0, ICCR_ICE); /* Disable clock and mark device as idle */ - clk_disable(pd->clk); + clk_disable_unprepare(pd->clk); pm_runtime_put_sync(pd->dev); }