From: Arnaud Ebalard Date: Fri, 21 Nov 2014 23:46:18 +0000 (+0100) Subject: arm: mvebu: define and use common Armada 370 UART pinctrl settings X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f8afeaea9611b5183b7919de4fb9333dedc72896;p=linux-beck.git arm: mvebu: define and use common Armada 370 UART pinctrl settings This patch defines common Armada 370 pinctrl settings for uart0 and uart1 interfaces: uart0: MPP0-1 as default uart1: MPP41-42 as default Note: this patch has the potential to break out-of-tree users w/o specific pinctrl settings for their uart interfaces if the default above does not match their config. Suggested-by: Andrew Lunn Acked-by: Andrew Lunn Signed-off-by: Arnaud Ebalard Link: https://lkml.kernel.org/r/31412e57955c98bc9cc47b70726b5072af945cc3.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper --- diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 49ac064d2f33..fdb3c12a6139 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -154,6 +154,21 @@ interrupts = <91>; }; + /* + * Default UART pinctrl setting without RTS/CTS, can + * be overwritten on board level if a different + * configuration is used. + */ + uart0: serial@12000 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + }; + + uart1: serial@12100 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + }; + system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; reg = <0x18200 0x100>; @@ -282,6 +297,16 @@ marvell,function = "spi1"; }; + uart0_pins: uart0-pins { + marvell,pins = "mpp0", "mpp1"; + marvell,function = "uart0"; + }; + + uart1_pins: uart1-pins { + marvell,pins = "mpp41", "mpp42"; + marvell,function = "uart1"; + }; + sdio_pins1: sdio-pins1 { marvell,pins = "mpp9", "mpp11", "mpp12", "mpp13", "mpp14", "mpp15";