From: Jes Sorensen Date: Thu, 7 Apr 2016 18:19:32 +0000 (-0400) Subject: rtl8xxxu: Implement IQK calibration for 8192eu X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f991f4e9147b1b7c9546c08f80d8d8f0aa53df2e;p=linux-beck.git rtl8xxxu: Implement IQK calibration for 8192eu 8192eu has it's own IQK calibration procedure, and notably uses undocumented RF register 0x56 in the process. Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c index cd536c0a2387..c08bbcbe4a0d 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c @@ -4955,6 +4955,334 @@ out: } #endif +static int rtl8192eu_iqk_path_a(struct rtl8xxxu_priv *priv) +{ + u32 reg_eac, reg_e94, reg_e9c; + int result = 0; + + /* + * TX IQK + * PA/PAD controlled by 0x0 + */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00180); + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* Path A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82140303); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x68160000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(10); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); + reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); + + if (!(reg_eac & BIT(28)) && + ((reg_e94 & 0x03ff0000) != 0x01420000) && + ((reg_e9c & 0x03ff0000) != 0x00420000)) + result |= 0x01; + + return result; +} + +static int rtl8192eu_rx_iqk_path_a(struct rtl8xxxu_priv *priv) +{ + u32 reg_ea4, reg_eac, reg_e94, reg_e9c, val32; + int result = 0; + + /* Leave IQK mode */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00); + + /* Enable path A PA in TX IQK mode */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf117b); + + /* PA/PAD control by 0x56, and set = 0x0 */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00980); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x51000); + + /* Enter IQK mode */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* TX IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x68160c1f); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(10); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); + reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); + + if (!(reg_eac & BIT(28)) && + ((reg_e94 & 0x03ff0000) != 0x01420000) && + ((reg_e9c & 0x03ff0000) != 0x00420000)) { + result |= 0x01; + } else { + /* PA/PAD controlled by 0x0 */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180); + goto out; + } + + val32 = 0x80007c00 | + (reg_e94 & 0x03ff0000) | ((reg_e9c >> 16) & 0x03ff); + rtl8xxxu_write32(priv, REG_TX_IQK, val32); + + /* Modify RX IQK mode table */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, 0x800a0); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7ffa); + + /* PA/PAD control by 0x56, and set = 0x0 */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00980); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x51000); + + /* Enter IQK mode */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* IQK setting */ + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* Path A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c1f); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a891); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(10); + + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2); + + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180); + + if (!(reg_eac & BIT(27)) && + ((reg_ea4 & 0x03ff0000) != 0x01320000) && + ((reg_eac & 0x03ff0000) != 0x00360000)) + result |= 0x02; + else + dev_warn(&priv->udev->dev, "%s: Path A RX IQK failed!\n", + __func__); + +out: + return result; +} + +static int rtl8192eu_iqk_path_b(struct rtl8xxxu_priv *priv) +{ + u32 reg_eac, reg_eb4, reg_ebc; + int result = 0; + + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00180); + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* Path B IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x821403e2); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x68160000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00492911); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(1); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); + reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); + + if (!(reg_eac & BIT(31)) && + ((reg_eb4 & 0x03ff0000) != 0x01420000) && + ((reg_ebc & 0x03ff0000) != 0x00420000)) + result |= 0x01; + else + dev_warn(&priv->udev->dev, "%s: Path B IQK failed!\n", + __func__); + + return result; +} + +static int rtl8192eu_rx_iqk_path_b(struct rtl8xxxu_priv *priv) +{ + u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc, val32; + int result = 0; + + /* Leave IQK mode */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + + /* Enable path A PA in TX IQK mode */ + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf117b); + + /* PA/PAD control by 0x56, and set = 0x0 */ + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00980); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_56, 0x51000); + + /* Enter IQK mode */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* TX IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82160c1f); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x68160c1f); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(10); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); + reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); + + if (!(reg_eac & BIT(31)) && + ((reg_eb4 & 0x03ff0000) != 0x01420000) && + ((reg_ebc & 0x03ff0000) != 0x00420000)) { + result |= 0x01; + } else { + /* + * PA/PAD controlled by 0x0 + * Vendor driver restores RF_A here which I believe is a bug + */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x180); + goto out; + } + + val32 = 0x80007c00 | + (reg_eb4 & 0x03ff0000) | ((reg_ebc >> 16) & 0x03ff); + rtl8xxxu_write32(priv, REG_TX_IQK, val32); + + /* Modify RX IQK mode table */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_WE_LUT, 0x800a0); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G1, 0x0000f); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_TXPA_G2, 0xf7ffa); + + /* PA/PAD control by 0x56, and set = 0x0 */ + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x00980); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_56, 0x51000); + + /* Enter IQK mode */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* IQK setting */ + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* Path A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x18008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160c1f); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160c1f); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a891); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xfa000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(10); + + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2); + reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2); + + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_UNKNOWN_DF, 0x180); + + if (!(reg_eac & BIT(30)) && + ((reg_ec4 & 0x03ff0000) != 0x01320000) && + ((reg_ecc & 0x03ff0000) != 0x00360000)) + result |= 0x02; + else + dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n", + __func__); + +out: + return result; +} + static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, int result[][8], int t) { @@ -5385,6 +5713,194 @@ static void rtl8723bu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, } } +static void rtl8192eu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, + int result[][8], int t) +{ + struct device *dev = &priv->udev->dev; + u32 i, val32; + int path_a_ok, path_b_ok; + int retry = 2; + const u32 adda_regs[RTL8XXXU_ADDA_REGS] = { + REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH, + REG_RX_WAIT_CCA, REG_TX_CCK_RFON, + REG_TX_CCK_BBON, REG_TX_OFDM_RFON, + REG_TX_OFDM_BBON, REG_TX_TO_RX, + REG_TX_TO_TX, REG_RX_CCK, + REG_RX_OFDM, REG_RX_WAIT_RIFS, + REG_RX_TO_RX, REG_STANDBY, + REG_SLEEP, REG_PMPD_ANAEN + }; + const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = { + REG_TXPAUSE, REG_BEACON_CTRL, + REG_BEACON_CTRL_1, REG_GPIO_MUXCFG + }; + const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = { + REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR, + REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B, + REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE, + REG_FPGA0_XB_RF_INT_OE, REG_CCK0_AFE_SETTING + }; + u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff; + u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff; + + /* + * Note: IQ calibration must be performed after loading + * PHY_REG.txt , and radio_a, radio_b.txt + */ + + if (t == 0) { + /* Save ADDA parameters, turn Path A ADDA on */ + rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup, + RTL8XXXU_ADDA_REGS); + rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup); + rtl8xxxu_save_regs(priv, iqk_bb_regs, + priv->bb_backup, RTL8XXXU_BB_REGS); + } + + rtl8xxxu_path_adda_on(priv, adda_regs, true); + + /* MAC settings */ + rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup); + + val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING); + val32 |= 0x0f000000; + rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32); + + rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600); + rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4); + rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22208200); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_SW_CTRL); + val32 |= (FPGA0_RF_PAPE | (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT)); + rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32); + + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_RF_INT_OE); + val32 |= BIT(10); + rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, val32); + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE); + val32 |= BIT(10); + rtl8xxxu_write32(priv, REG_FPGA0_XB_RF_INT_OE, val32); + + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + for (i = 0; i < retry; i++) { + path_a_ok = rtl8192eu_iqk_path_a(priv); + if (path_a_ok == 0x01) { + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_BEFORE_IQK_A); + result[t][0] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_AFTER_IQK_A); + result[t][1] = (val32 >> 16) & 0x3ff; + + break; + } + } + + if (!path_a_ok) + dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__); + + for (i = 0; i < retry; i++) { + path_a_ok = rtl8192eu_rx_iqk_path_a(priv); + if (path_a_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_BEFORE_IQK_A_2); + result[t][2] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_AFTER_IQK_A_2); + result[t][3] = (val32 >> 16) & 0x3ff; + + break; + } + } + + if (!path_a_ok) + dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__); + + if (priv->rf_paths > 1) { + dev_warn(dev, "%s: Path B ongoing\n", __func__); + + /* Path A into standby */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000); + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + + /* Turn Path B ADDA on */ + rtl8xxxu_path_adda_on(priv, adda_regs, false); + + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000); + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + for (i = 0; i < retry; i++) { + path_b_ok = rtl8192eu_iqk_path_b(priv); + if (path_b_ok == 0x01) { + val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); + result[t][4] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); + result[t][5] = (val32 >> 16) & 0x3ff; + break; + } + } + + if (!path_b_ok) + dev_dbg(dev, "%s: Path B IQK failed!\n", __func__); + + for (i = 0; i < retry; i++) { + path_b_ok = rtl8192eu_rx_iqk_path_b(priv); + if (path_a_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_BEFORE_IQK_B_2); + result[t][6] = (val32 >> 16) & 0x3ff; + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_AFTER_IQK_B_2); + result[t][7] = (val32 >> 16) & 0x3ff; + break; + } + } + + if (!path_b_ok) + dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__); + } + + /* Back to BB mode, load original value */ + rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x00000000); + + if (t) { + /* Reload ADDA power saving parameters */ + rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup, + RTL8XXXU_ADDA_REGS); + + /* Reload MAC parameters */ + rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup); + + /* Reload BB parameters */ + rtl8xxxu_restore_regs(priv, iqk_bb_regs, + priv->bb_backup, RTL8XXXU_BB_REGS); + + /* Restore RX initial gain */ + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1); + val32 &= 0xffffff00; + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50); + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc); + + if (priv->rf_paths > 1) { + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1); + val32 &= 0xffffff00; + rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, + val32 | 0x50); + rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, + val32 | xb_agc); + } + + /* Load 0xe30 IQC default value */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00); + } +} + static void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start) { struct h2c_cmd h2c; @@ -5630,6 +6146,96 @@ static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) rtl8xxxu_prepare_calibrate(priv, 0); } +static void rtl8192eu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) +{ + struct device *dev = &priv->udev->dev; + int result[4][8]; /* last is final result */ + int i, candidate; + bool path_a_ok, path_b_ok; + u32 reg_e94, reg_e9c, reg_ea4, reg_eac; + u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc; + bool simu; + + memset(result, 0, sizeof(result)); + candidate = -1; + + path_a_ok = false; + path_b_ok = false; + + for (i = 0; i < 3; i++) { + rtl8192eu_phy_iqcalibrate(priv, result, i); + + if (i == 1) { + simu = rtl8723bu_simularity_compare(priv, result, 0, 1); + if (simu) { + candidate = 0; + break; + } + } + + if (i == 2) { + simu = rtl8723bu_simularity_compare(priv, result, 0, 2); + if (simu) { + candidate = 0; + break; + } + + simu = rtl8723bu_simularity_compare(priv, result, 1, 2); + if (simu) + candidate = 1; + else + candidate = 3; + } + } + + for (i = 0; i < 4; i++) { + reg_e94 = result[i][0]; + reg_e9c = result[i][1]; + reg_ea4 = result[i][2]; + reg_eac = result[i][3]; + reg_eb4 = result[i][4]; + reg_ebc = result[i][5]; + reg_ec4 = result[i][6]; + reg_ecc = result[i][7]; + } + + if (candidate >= 0) { + reg_e94 = result[candidate][0]; + priv->rege94 = reg_e94; + reg_e9c = result[candidate][1]; + priv->rege9c = reg_e9c; + reg_ea4 = result[candidate][2]; + reg_eac = result[candidate][3]; + reg_eb4 = result[candidate][4]; + priv->regeb4 = reg_eb4; + reg_ebc = result[candidate][5]; + priv->regebc = reg_ebc; + reg_ec4 = result[candidate][6]; + reg_ecc = result[candidate][7]; + dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate); + dev_dbg(dev, + "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x " + "ecc=%x\n ", __func__, reg_e94, reg_e9c, + reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc); + path_a_ok = true; + path_b_ok = true; + } else { + reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100; + reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0; + } + + if (reg_e94 && candidate >= 0) + rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result, + candidate, (reg_ea4 == 0)); + + if (priv->rf_paths > 1) + rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result, + candidate, (reg_ec4 == 0)); + + rtl8xxxu_save_regs(priv, rtl8723au_iqk_phy_iq_bb_reg, + priv->bb_recovery_backup, RTL8XXXU_BB_REGS); +} + static void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv) { u32 val32; @@ -9080,7 +9686,7 @@ static struct rtl8xxxu_fileops rtl8192eu_fops = { .power_off = rtl8xxxu_power_off, .reset_8051 = rtl8xxxu_reset_8051, .llt_init = rtl8xxxu_auto_llt_table, - .phy_iq_calibrate = rtl8723bu_phy_iq_calibrate, + .phy_iq_calibrate = rtl8192eu_phy_iq_calibrate, .config_channel = rtl8723bu_config_channel, .parse_rx_desc = rtl8723bu_parse_rx_desc, .enable_rf = rtl8723b_enable_rf, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h index c19f234f1934..2aa14b14a0a5 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h @@ -1130,6 +1130,7 @@ #define RF6052_REG_T_METER_8723B 0x42 #define RF6052_REG_UNKNOWN_43 0x43 #define RF6052_REG_UNKNOWN_55 0x55 +#define RF6052_REG_UNKNOWN_56 0x56 #define RF6052_REG_S0S1 0xb0 #define RF6052_REG_UNKNOWN_DF 0xdf #define RF6052_REG_UNKNOWN_ED 0xed