From: Francois Romieu Date: Sun, 23 Oct 2011 17:11:35 +0000 (+0200) Subject: et131x: fix error paths in et131x_pci_setup. X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=fa9f0a657e1474d7b2067fc22bd9a5e94878a40c;p=mv-sheeva.git et131x: fix error paths in et131x_pci_setup. Wrong status code and unbalanced phy_connect. Signed-off-by: Francois Romieu Acked-by: Mark Einon Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index 35270a82923..debc07c52e7 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -4402,6 +4402,7 @@ static void __devexit et131x_pci_remove(struct pci_dev *pdev) struct et131x_adapter *adapter = netdev_priv(netdev); unregister_netdev(netdev); + phy_disconnect(adapter->phydev); mdiobus_unregister(adapter->mii_bus); kfree(adapter->mii_bus->irq); mdiobus_free(adapter->mii_bus); @@ -5250,40 +5251,6 @@ static const struct net_device_ops et131x_netdev_ops = { .ndo_do_ioctl = et131x_ioctl, }; -/** - * et131x_device_alloc - * - * Returns pointer to the allocated and initialized net_device struct for - * this device. - * - * Create instances of net_device and wl_private for the new adapter and - * register the device's entry points in the net_device structure. - */ -struct net_device *et131x_device_alloc(void) -{ - struct net_device *netdev; - - /* Alloc net_device and adapter structs */ - netdev = alloc_etherdev(sizeof(struct et131x_adapter)); - - if (!netdev) { - printk(KERN_ERR "et131x: Alloc of net_device struct failed\n"); - return NULL; - } - - /* - * Setup the function registration table (and other data) for a - * net_device - */ - netdev->watchdog_timeo = ET131X_TX_TIMEOUT; - netdev->netdev_ops = &et131x_netdev_ops; - - /* Poll? */ - /* netdev->poll = &et131x_poll; */ - /* netdev->poll_controller = &et131x_poll_controller; */ - return netdev; -} - /** * et131x_pci_setup - Perform device initialization * @pdev: a pointer to the device's pci_dev structure @@ -5299,24 +5266,26 @@ struct net_device *et131x_device_alloc(void) static int __devinit et131x_pci_setup(struct pci_dev *pdev, const struct pci_device_id *ent) { - int result; struct net_device *netdev; struct et131x_adapter *adapter; + int rc; int ii; - result = pci_enable_device(pdev); - if (result) { + rc = pci_enable_device(pdev); + if (rc < 0) { dev_err(&pdev->dev, "pci_enable_device() failed\n"); - goto err_out; + goto out; } /* Perform some basic PCI checks */ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { dev_err(&pdev->dev, "Can't find PCI device's base address\n"); + rc = -ENODEV; goto err_disable; } - if (pci_request_regions(pdev, DRIVER_NAME)) { + rc = pci_request_regions(pdev, DRIVER_NAME); + if (rc < 0) { dev_err(&pdev->dev, "Can't get PCI resources\n"); goto err_disable; } @@ -5325,46 +5294,50 @@ static int __devinit et131x_pci_setup(struct pci_dev *pdev, /* Check the DMA addressing support of this device */ if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) { - result = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); - if (result) { + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); + if (rc < 0) { dev_err(&pdev->dev, "Unable to obtain 64 bit DMA for consistent allocations\n"); goto err_release_res; } } else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) { - result = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); - if (result) { + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc < 0) { dev_err(&pdev->dev, "Unable to obtain 32 bit DMA for consistent allocations\n"); goto err_release_res; } } else { dev_err(&pdev->dev, "No usable DMA addressing method\n"); - result = -EIO; + rc = -EIO; goto err_release_res; } /* Allocate netdev and private adapter structs */ - netdev = et131x_device_alloc(); + netdev = alloc_etherdev(sizeof(struct et131x_adapter)); if (!netdev) { dev_err(&pdev->dev, "Couldn't alloc netdev struct\n"); - result = -ENOMEM; + rc = -ENOMEM; goto err_release_res; } + netdev->watchdog_timeo = ET131X_TX_TIMEOUT; + netdev->netdev_ops = &et131x_netdev_ops; + SET_NETDEV_DEV(netdev, &pdev->dev); et131x_set_ethtool_ops(netdev); adapter = et131x_adapter_init(netdev, pdev); - /* Initialise the PCI setup for the device */ - et131x_pci_init(adapter, pdev); + rc = et131x_pci_init(adapter, pdev); + if (rc < 0) + goto err_free_dev; /* Map the bus-relative registers to system virtual memory */ adapter->regs = pci_ioremap_bar(pdev, 0); if (!adapter->regs) { dev_err(&pdev->dev, "Cannot map device registers\n"); - result = -ENOMEM; + rc = -ENOMEM; goto err_free_dev; } @@ -5378,8 +5351,8 @@ static int __devinit et131x_pci_setup(struct pci_dev *pdev, et131x_disable_interrupts(adapter); /* Allocate DMA memory */ - result = et131x_adapter_memory_alloc(adapter); - if (result) { + rc = et131x_adapter_memory_alloc(adapter); + if (rc < 0) { dev_err(&pdev->dev, "Could not alloc adapater memory (DMA)\n"); goto err_iounmap; } @@ -5397,6 +5370,8 @@ static int __devinit et131x_pci_setup(struct pci_dev *pdev, adapter->boot_coma = 0; et1310_disable_phy_coma(adapter); + rc = -ENOMEM; + /* Setup the mii_bus struct */ adapter->mii_bus = mdiobus_alloc(); if (!adapter->mii_bus) { @@ -5420,13 +5395,14 @@ static int __devinit et131x_pci_setup(struct pci_dev *pdev, for (ii = 0; ii < PHY_MAX_ADDR; ii++) adapter->mii_bus->irq[ii] = PHY_POLL; - if (mdiobus_register(adapter->mii_bus)) { + rc = mdiobus_register(adapter->mii_bus); + if (rc < 0) { dev_err(&pdev->dev, "failed to register MII bus\n"); - mdiobus_free(adapter->mii_bus); goto err_mdio_free_irq; } - if (et131x_mii_probe(netdev)) { + rc = et131x_mii_probe(netdev); + if (rc < 0) { dev_err(&pdev->dev, "failed to probe MII bus\n"); goto err_mdio_unregister; } @@ -5442,10 +5418,10 @@ static int __devinit et131x_pci_setup(struct pci_dev *pdev, */ /* Register the net_device struct with the Linux network layer */ - result = register_netdev(netdev); - if (result != 0) { + rc = register_netdev(netdev); + if (rc < 0) { dev_err(&pdev->dev, "register_netdev() failed\n"); - goto err_mdio_unregister; + goto err_phy_disconnect; } /* Register the net_device struct with the PCI subsystem. Save a copy @@ -5454,9 +5430,11 @@ static int __devinit et131x_pci_setup(struct pci_dev *pdev, */ pci_set_drvdata(pdev, netdev); pci_save_state(adapter->pdev); +out: + return rc; - return result; - +err_phy_disconnect: + phy_disconnect(adapter->phydev); err_mdio_unregister: mdiobus_unregister(adapter->mii_bus); err_mdio_free_irq: @@ -5474,8 +5452,7 @@ err_release_res: pci_release_regions(pdev); err_disable: pci_disable_device(pdev); -err_out: - return result; + goto out; } static DEFINE_PCI_DEVICE_TABLE(et131x_pci_table) = {