From: Imre Deak Date: Wed, 29 Jun 2016 16:13:55 +0000 (+0300) Subject: drm/i915/bxt: Fix sanity check for BIOS RC6 setup X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=fc6198417264e757ab11a6198c1afb6f46976a47;p=linux-beck.git drm/i915/bxt: Fix sanity check for BIOS RC6 setup BXT BIOS has two options related to GPU power management: "RC6(Render Standby)" and "GT PM Support". The assumption so far was that disabling either of these options would leave RC6 uninitialized. According to my tests this isn't so: for a proper RC6 setup we only need the "GT PM Support" option to be enabled while the "RC6" option only controls whether RC6 is left enabled or not by BIOS. OTOH we were missing a few checks to ensure a proper RC6 setup. Add these now and don't fail the sanity check if RC6 is disabled. This fixes a problem where RC6 remains disabled after reloading the driver, since we explicitly disable RC6 during unloading. v2: - Print a debug message about the BIOS enabled RC state. (Sagar) CC: Sagar Arun Kamble Signed-off-by: Imre Deak Reviewed-by: Sagar Arun Kamble Link: http://patchwork.freedesktop.org/patch/msgid/1467216835-1086-2-git-send-email-imre.deak@intel.com --- diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index c6bfbf8d7cca..8bfde75789f6 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -7070,7 +7070,8 @@ enum { #define GEN6_RPDEUC _MMIO(0xA084) #define GEN6_RPDEUCSW _MMIO(0xA088) #define GEN6_RC_STATE _MMIO(0xA094) -#define RC6_STATE (1 << 18) +#define RC_SW_TARGET_STATE_SHIFT 16 +#define RC_SW_TARGET_STATE_MASK (7 << RC_SW_TARGET_STATE_SHIFT) #define GEN6_RC1_WAKE_RATE_LIMIT _MMIO(0xA098) #define GEN6_RC6_WAKE_RATE_LIMIT _MMIO(0xA09C) #define GEN6_RC6pp_WAKE_RATE_LIMIT _MMIO(0xA0A0) @@ -7085,12 +7086,16 @@ enum { #define GEN6_RC6pp_THRESHOLD _MMIO(0xA0C0) #define GEN6_PMINTRMSK _MMIO(0xA168) #define GEN8_PMINTR_REDIRECT_TO_NON_DISP (1<<31) +#define GEN8_MISC_CTRL0 _MMIO(0xA180) #define VLV_PWRDWNUPCTL _MMIO(0xA294) #define GEN9_MEDIA_PG_IDLE_HYSTERESIS _MMIO(0xA0C4) #define GEN9_RENDER_PG_IDLE_HYSTERESIS _MMIO(0xA0C8) #define GEN9_PG_ENABLE _MMIO(0xA210) #define GEN9_RENDER_PG_ENABLE (1<<0) #define GEN9_MEDIA_PG_ENABLE (1<<1) +#define GEN8_PUSHBUS_CONTROL _MMIO(0xA248) +#define GEN8_PUSHBUS_ENABLE _MMIO(0xA250) +#define GEN8_PUSHBUS_SHIFT _MMIO(0xA25C) #define VLV_CHICKEN_3 _MMIO(VLV_DISPLAY_BASE + 0x7040C) #define PIXEL_OVERLAP_CNT_MASK (3 << 30) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index b09fc5f2c792..cfe850f8815a 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -4989,6 +4989,17 @@ static bool bxt_check_bios_rc6_setup(struct drm_i915_private *dev_priv) struct i915_ggtt *ggtt = &dev_priv->ggtt; bool enable_rc6 = true; unsigned long rc6_ctx_base; + u32 rc_ctl; + int rc_sw_target; + + rc_ctl = I915_READ(GEN6_RC_CONTROL); + rc_sw_target = (I915_READ(GEN6_RC_STATE) & RC_SW_TARGET_STATE_MASK) >> + RC_SW_TARGET_STATE_SHIFT; + DRM_DEBUG_DRIVER("BIOS enabled RC states: " + "HW_CTRL %s HW_RC6 %s SW_TARGET_STATE %x\n", + onoff(rc_ctl & GEN6_RC_CTL_HW_ENABLE), + onoff(rc_ctl & GEN6_RC_CTL_RC6_ENABLE), + rc_sw_target); if (!(I915_READ(RC6_LOCATION) & RC6_CTX_IN_DRAM)) { DRM_DEBUG_DRIVER("RC6 Base location not set properly.\n"); @@ -5015,11 +5026,20 @@ static bool bxt_check_bios_rc6_setup(struct drm_i915_private *dev_priv) enable_rc6 = false; } - if (!(I915_READ(GEN6_RC_CONTROL) & (GEN6_RC_CTL_RC6_ENABLE | - GEN6_RC_CTL_HW_ENABLE)) && - ((I915_READ(GEN6_RC_CONTROL) & GEN6_RC_CTL_HW_ENABLE) || - !(I915_READ(GEN6_RC_STATE) & RC6_STATE))) { - DRM_DEBUG_DRIVER("HW/SW RC6 is not enabled by BIOS.\n"); + if (!I915_READ(GEN8_PUSHBUS_CONTROL) || + !I915_READ(GEN8_PUSHBUS_ENABLE) || + !I915_READ(GEN8_PUSHBUS_SHIFT)) { + DRM_DEBUG_DRIVER("Pushbus not setup properly.\n"); + enable_rc6 = false; + } + + if (!I915_READ(GEN6_GFXPAUSE)) { + DRM_DEBUG_DRIVER("GFX pause not setup properly.\n"); + enable_rc6 = false; + } + + if (!I915_READ(GEN8_MISC_CTRL0)) { + DRM_DEBUG_DRIVER("GPM control not setup properly.\n"); enable_rc6 = false; }