From: Jonathan Cameron Date: Sun, 3 Jul 2016 13:55:50 +0000 (+0100) Subject: staging:iio:lis3l02dq drop separate driver X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=fc6bd7275bd4c1d7fce50c55370b0a3526869bd7;p=linux-beck.git staging:iio:lis3l02dq drop separate driver Retire this venerable driver as the basic support is now in the generic st-sensors accelerometer driver. There are a few missing features in the new driver: * Threshold events. * Access to the calibration adjustment registers (patch shortly) In exchange it brings a cleaner and more maintainable code base that actually gets tested more than once every few years. I'll actually be suprised if anyone other than me has a board with one of these on that is running an up to date kernel. Signed-off-by: Jonathan Cameron --- diff --git a/drivers/staging/iio/accel/Kconfig b/drivers/staging/iio/accel/Kconfig index f066aa30f0ac..1c994b57c7d2 100644 --- a/drivers/staging/iio/accel/Kconfig +++ b/drivers/staging/iio/accel/Kconfig @@ -51,20 +51,6 @@ config ADIS16240 To compile this driver as a module, say M here: the module will be called adis16240. -config LIS3L02DQ - tristate "ST Microelectronics LIS3L02DQ Accelerometer Driver" - depends on SPI - select IIO_TRIGGER if IIO_BUFFER - depends on !IIO_BUFFER || IIO_KFIFO_BUF - depends on GPIOLIB || COMPILE_TEST - help - Say Y here to build SPI support for the ST microelectronics - accelerometer. The driver supplies direct access via sysfs files - and an event interface via a character device. - - To compile this driver as a module, say M here: the module will be - called lis3l02dq. - config SCA3000 depends on IIO_BUFFER depends on SPI diff --git a/drivers/staging/iio/accel/Makefile b/drivers/staging/iio/accel/Makefile index 415329c96f0c..1810a434a755 100644 --- a/drivers/staging/iio/accel/Makefile +++ b/drivers/staging/iio/accel/Makefile @@ -14,9 +14,5 @@ obj-$(CONFIG_ADIS16209) += adis16209.o adis16240-y := adis16240_core.o obj-$(CONFIG_ADIS16240) += adis16240.o -lis3l02dq-y := lis3l02dq_core.o -lis3l02dq-$(CONFIG_IIO_BUFFER) += lis3l02dq_ring.o -obj-$(CONFIG_LIS3L02DQ) += lis3l02dq.o - sca3000-y := sca3000_core.o sca3000_ring.o obj-$(CONFIG_SCA3000) += sca3000.o diff --git a/drivers/staging/iio/accel/lis3l02dq.h b/drivers/staging/iio/accel/lis3l02dq.h deleted file mode 100644 index 6bd3d4d5bc9d..000000000000 --- a/drivers/staging/iio/accel/lis3l02dq.h +++ /dev/null @@ -1,217 +0,0 @@ -/* - * LISL02DQ.h -- support STMicroelectronics LISD02DQ - * 3d 2g Linear Accelerometers via SPI - * - * Copyright (c) 2007 Jonathan Cameron - * - * Loosely based upon tle62x0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef SPI_LIS3L02DQ_H_ -#define SPI_LIS3L02DQ_H_ -#define LIS3L02DQ_READ_REG(a) ((a) | 0x80) -#define LIS3L02DQ_WRITE_REG(a) a - -/* Calibration parameters */ -#define LIS3L02DQ_REG_OFFSET_X_ADDR 0x16 -#define LIS3L02DQ_REG_OFFSET_Y_ADDR 0x17 -#define LIS3L02DQ_REG_OFFSET_Z_ADDR 0x18 - -#define LIS3L02DQ_REG_GAIN_X_ADDR 0x19 -#define LIS3L02DQ_REG_GAIN_Y_ADDR 0x1A -#define LIS3L02DQ_REG_GAIN_Z_ADDR 0x1B - -/* Control Register (1 of 2) */ -#define LIS3L02DQ_REG_CTRL_1_ADDR 0x20 -/* Power ctrl - either bit set corresponds to on*/ -#define LIS3L02DQ_REG_CTRL_1_PD_ON 0xC0 - -/* Decimation Factor */ -#define LIS3L02DQ_DEC_MASK 0x30 -#define LIS3L02DQ_REG_CTRL_1_DF_128 0x00 -#define LIS3L02DQ_REG_CTRL_1_DF_64 0x10 -#define LIS3L02DQ_REG_CTRL_1_DF_32 0x20 -#define LIS3L02DQ_REG_CTRL_1_DF_8 (0x10 | 0x20) - -/* Self Test Enable */ -#define LIS3L02DQ_REG_CTRL_1_SELF_TEST_ON 0x08 - -/* Axes enable ctrls */ -#define LIS3L02DQ_REG_CTRL_1_AXES_Z_ENABLE 0x04 -#define LIS3L02DQ_REG_CTRL_1_AXES_Y_ENABLE 0x02 -#define LIS3L02DQ_REG_CTRL_1_AXES_X_ENABLE 0x01 - -/* Control Register (2 of 2) */ -#define LIS3L02DQ_REG_CTRL_2_ADDR 0x21 - -/* Block Data Update only after MSB and LSB read */ -#define LIS3L02DQ_REG_CTRL_2_BLOCK_UPDATE 0x40 - -/* Set to big endian output */ -#define LIS3L02DQ_REG_CTRL_2_BIG_ENDIAN 0x20 - -/* Reboot memory content */ -#define LIS3L02DQ_REG_CTRL_2_REBOOT_MEMORY 0x10 - -/* Interrupt Enable - applies data ready to the RDY pad */ -#define LIS3L02DQ_REG_CTRL_2_ENABLE_INTERRUPT 0x08 - -/* Enable Data Ready Generation - relationship with previous unclear in docs */ -#define LIS3L02DQ_REG_CTRL_2_ENABLE_DATA_READY_GENERATION 0x04 - -/* SPI 3 wire mode */ -#define LIS3L02DQ_REG_CTRL_2_THREE_WIRE_SPI_MODE 0x02 - -/* Data alignment, default is 12 bit right justified - * - option for 16 bit left justified - */ -#define LIS3L02DQ_REG_CTRL_2_DATA_ALIGNMENT_16_BIT_LEFT_JUSTIFIED 0x01 - -/* Interrupt related stuff */ -#define LIS3L02DQ_REG_WAKE_UP_CFG_ADDR 0x23 - -/* Switch from or combination of conditions to and */ -#define LIS3L02DQ_REG_WAKE_UP_CFG_BOOLEAN_AND 0x80 - -/* Latch interrupt request, - * if on ack must be given by reading the ack register - */ -#define LIS3L02DQ_REG_WAKE_UP_CFG_LATCH_SRC 0x40 - -/* Z Interrupt on High (above threshold) */ -#define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Z_HIGH 0x20 -/* Z Interrupt on Low */ -#define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Z_LOW 0x10 -/* Y Interrupt on High */ -#define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Y_HIGH 0x08 -/* Y Interrupt on Low */ -#define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Y_LOW 0x04 -/* X Interrupt on High */ -#define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_X_HIGH 0x02 -/* X Interrupt on Low */ -#define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_X_LOW 0x01 - -/* Register that gives description of what caused interrupt - * - latched if set in CFG_ADDRES - */ -#define LIS3L02DQ_REG_WAKE_UP_SRC_ADDR 0x24 -/* top bit ignored */ -/* Interrupt Active */ -#define LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_ACTIVATED 0x40 -/* Interupts that have been triggered */ -#define LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Z_HIGH 0x20 -#define LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Z_LOW 0x10 -#define LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Y_HIGH 0x08 -#define LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Y_LOW 0x04 -#define LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_X_HIGH 0x02 -#define LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_X_LOW 0x01 - -#define LIS3L02DQ_REG_WAKE_UP_ACK_ADDR 0x25 - -/* Status register */ -#define LIS3L02DQ_REG_STATUS_ADDR 0x27 -/* XYZ axis data overrun - first is all overrun? */ -#define LIS3L02DQ_REG_STATUS_XYZ_OVERRUN 0x80 -#define LIS3L02DQ_REG_STATUS_Z_OVERRUN 0x40 -#define LIS3L02DQ_REG_STATUS_Y_OVERRUN 0x20 -#define LIS3L02DQ_REG_STATUS_X_OVERRUN 0x10 -/* XYZ new data available - first is all 3 available? */ -#define LIS3L02DQ_REG_STATUS_XYZ_NEW_DATA 0x08 -#define LIS3L02DQ_REG_STATUS_Z_NEW_DATA 0x04 -#define LIS3L02DQ_REG_STATUS_Y_NEW_DATA 0x02 -#define LIS3L02DQ_REG_STATUS_X_NEW_DATA 0x01 - -/* The accelerometer readings - low and high bytes. - * Form of high byte dependent on justification set in ctrl reg - */ -#define LIS3L02DQ_REG_OUT_X_L_ADDR 0x28 -#define LIS3L02DQ_REG_OUT_X_H_ADDR 0x29 -#define LIS3L02DQ_REG_OUT_Y_L_ADDR 0x2A -#define LIS3L02DQ_REG_OUT_Y_H_ADDR 0x2B -#define LIS3L02DQ_REG_OUT_Z_L_ADDR 0x2C -#define LIS3L02DQ_REG_OUT_Z_H_ADDR 0x2D - -/* Threshold values for all axes and both above and below thresholds - * - i.e. there is only one value - */ -#define LIS3L02DQ_REG_THS_L_ADDR 0x2E -#define LIS3L02DQ_REG_THS_H_ADDR 0x2F - -#define LIS3L02DQ_DEFAULT_CTRL1 (LIS3L02DQ_REG_CTRL_1_PD_ON \ - | LIS3L02DQ_REG_CTRL_1_AXES_Z_ENABLE \ - | LIS3L02DQ_REG_CTRL_1_AXES_Y_ENABLE \ - | LIS3L02DQ_REG_CTRL_1_AXES_X_ENABLE \ - | LIS3L02DQ_REG_CTRL_1_DF_128) - -#define LIS3L02DQ_DEFAULT_CTRL2 0 - -#define LIS3L02DQ_MAX_TX 12 -#define LIS3L02DQ_MAX_RX 12 -/** - * struct lis3l02dq_state - device instance specific data - * @us: actual spi_device - * @trig: data ready trigger registered with iio - * @buf_lock: mutex to protect tx and rx - * @tx: transmit buffer - * @rx: receive buffer - **/ -struct lis3l02dq_state { - struct spi_device *us; - struct iio_trigger *trig; - struct mutex buf_lock; - int gpio; - bool trigger_on; - - u8 tx[LIS3L02DQ_MAX_RX] ____cacheline_aligned; - u8 rx[LIS3L02DQ_MAX_RX] ____cacheline_aligned; -}; - -int lis3l02dq_spi_read_reg_8(struct iio_dev *indio_dev, - u8 reg_address, - u8 *val); - -int lis3l02dq_spi_write_reg_8(struct iio_dev *indio_dev, - u8 reg_address, - u8 val); - -int lis3l02dq_disable_all_events(struct iio_dev *indio_dev); - -#ifdef CONFIG_IIO_BUFFER -/* At the moment triggers are only used for buffer - * filling. This may change! - */ -void lis3l02dq_remove_trigger(struct iio_dev *indio_dev); -int lis3l02dq_probe_trigger(struct iio_dev *indio_dev); - -int lis3l02dq_configure_buffer(struct iio_dev *indio_dev); -void lis3l02dq_unconfigure_buffer(struct iio_dev *indio_dev); - -irqreturn_t lis3l02dq_data_rdy_trig_poll(int irq, void *private); -#define lis3l02dq_th lis3l02dq_data_rdy_trig_poll - -#else /* CONFIG_IIO_BUFFER */ -#define lis3l02dq_th lis3l02dq_nobuffer - -static inline void lis3l02dq_remove_trigger(struct iio_dev *indio_dev) -{ -} - -static inline int lis3l02dq_probe_trigger(struct iio_dev *indio_dev) -{ - return 0; -} - -static int lis3l02dq_configure_buffer(struct iio_dev *indio_dev) -{ - return 0; -} - -static inline void lis3l02dq_unconfigure_buffer(struct iio_dev *indio_dev) -{ -} -#endif /* CONFIG_IIO_BUFFER */ -#endif /* SPI_LIS3L02DQ_H_ */ diff --git a/drivers/staging/iio/accel/lis3l02dq_core.c b/drivers/staging/iio/accel/lis3l02dq_core.c deleted file mode 100644 index 5c3410a74fdb..000000000000 --- a/drivers/staging/iio/accel/lis3l02dq_core.c +++ /dev/null @@ -1,814 +0,0 @@ -/* - * lis3l02dq.c support STMicroelectronics LISD02DQ - * 3d 2g Linear Accelerometers via SPI - * - * Copyright (c) 2007 Jonathan Cameron - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Settings: - * 16 bit left justified mode used. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "lis3l02dq.h" - -/* At the moment the spi framework doesn't allow global setting of cs_change. - * It's in the likely to be added comment at the top of spi.h. - * This means that use cannot be made of spi_write etc. - */ -/* direct copy of the irq_default_primary_handler */ -#ifndef CONFIG_IIO_BUFFER -static irqreturn_t lis3l02dq_nobuffer(int irq, void *private) -{ - return IRQ_WAKE_THREAD; -} -#endif - -/** - * lis3l02dq_spi_read_reg_8() - read single byte from a single register - * @indio_dev: iio_dev for this actual device - * @reg_address: the address of the register to be read - * @val: pass back the resulting value - **/ -int lis3l02dq_spi_read_reg_8(struct iio_dev *indio_dev, - u8 reg_address, u8 *val) -{ - struct lis3l02dq_state *st = iio_priv(indio_dev); - int ret; - struct spi_transfer xfer = { - .tx_buf = st->tx, - .rx_buf = st->rx, - .bits_per_word = 8, - .len = 2, - }; - - mutex_lock(&st->buf_lock); - st->tx[0] = LIS3L02DQ_READ_REG(reg_address); - st->tx[1] = 0; - - ret = spi_sync_transfer(st->us, &xfer, 1); - *val = st->rx[1]; - mutex_unlock(&st->buf_lock); - - return ret; -} - -/** - * lis3l02dq_spi_write_reg_8() - write single byte to a register - * @indio_dev: iio_dev for this device - * @reg_address: the address of the register to be written - * @val: the value to write - **/ -int lis3l02dq_spi_write_reg_8(struct iio_dev *indio_dev, - u8 reg_address, - u8 val) -{ - int ret; - struct lis3l02dq_state *st = iio_priv(indio_dev); - - mutex_lock(&st->buf_lock); - st->tx[0] = LIS3L02DQ_WRITE_REG(reg_address); - st->tx[1] = val; - ret = spi_write(st->us, st->tx, 2); - mutex_unlock(&st->buf_lock); - - return ret; -} - -/** - * lisl302dq_spi_write_reg_s16() - write 2 bytes to a pair of registers - * @indio_dev: iio_dev for this device - * @lower_reg_address: the address of the lower of the two registers. - * Second register is assumed to have address one greater. - * @value: value to be written - **/ -static int lis3l02dq_spi_write_reg_s16(struct iio_dev *indio_dev, - u8 lower_reg_address, - s16 value) -{ - int ret; - struct lis3l02dq_state *st = iio_priv(indio_dev); - struct spi_transfer xfers[] = { { - .tx_buf = st->tx, - .bits_per_word = 8, - .len = 2, - .cs_change = 1, - }, { - .tx_buf = st->tx + 2, - .bits_per_word = 8, - .len = 2, - }, - }; - - mutex_lock(&st->buf_lock); - st->tx[0] = LIS3L02DQ_WRITE_REG(lower_reg_address); - st->tx[1] = value & 0xFF; - st->tx[2] = LIS3L02DQ_WRITE_REG(lower_reg_address + 1); - st->tx[3] = (value >> 8) & 0xFF; - - ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers)); - mutex_unlock(&st->buf_lock); - - return ret; -} - -static int lis3l02dq_read_reg_s16(struct iio_dev *indio_dev, - u8 lower_reg_address, - int *val) -{ - struct lis3l02dq_state *st = iio_priv(indio_dev); - int ret; - s16 tempval; - struct spi_transfer xfers[] = { { - .tx_buf = st->tx, - .rx_buf = st->rx, - .bits_per_word = 8, - .len = 2, - .cs_change = 1, - }, { - .tx_buf = st->tx + 2, - .rx_buf = st->rx + 2, - .bits_per_word = 8, - .len = 2, - }, - }; - - mutex_lock(&st->buf_lock); - st->tx[0] = LIS3L02DQ_READ_REG(lower_reg_address); - st->tx[1] = 0; - st->tx[2] = LIS3L02DQ_READ_REG(lower_reg_address + 1); - st->tx[3] = 0; - - ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers)); - if (ret) { - dev_err(&st->us->dev, "problem when reading 16 bit register"); - goto error_ret; - } - tempval = (s16)(st->rx[1]) | ((s16)(st->rx[3]) << 8); - - *val = tempval; -error_ret: - mutex_unlock(&st->buf_lock); - return ret; -} - -enum lis3l02dq_rm_ind { - LIS3L02DQ_ACCEL, - LIS3L02DQ_GAIN, - LIS3L02DQ_BIAS, -}; - -static u8 lis3l02dq_axis_map[3][3] = { - [LIS3L02DQ_ACCEL] = { LIS3L02DQ_REG_OUT_X_L_ADDR, - LIS3L02DQ_REG_OUT_Y_L_ADDR, - LIS3L02DQ_REG_OUT_Z_L_ADDR }, - [LIS3L02DQ_GAIN] = { LIS3L02DQ_REG_GAIN_X_ADDR, - LIS3L02DQ_REG_GAIN_Y_ADDR, - LIS3L02DQ_REG_GAIN_Z_ADDR }, - [LIS3L02DQ_BIAS] = { LIS3L02DQ_REG_OFFSET_X_ADDR, - LIS3L02DQ_REG_OFFSET_Y_ADDR, - LIS3L02DQ_REG_OFFSET_Z_ADDR } -}; - -static int lis3l02dq_read_thresh(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - enum iio_event_type type, - enum iio_event_direction dir, - enum iio_event_info info, - int *val, int *val2) -{ - int ret; - - ret = lis3l02dq_read_reg_s16(indio_dev, LIS3L02DQ_REG_THS_L_ADDR, val); - if (ret) - return ret; - return IIO_VAL_INT; -} - -static int lis3l02dq_write_thresh(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - enum iio_event_type type, - enum iio_event_direction dir, - enum iio_event_info info, - int val, int val2) -{ - u16 value = val; - - return lis3l02dq_spi_write_reg_s16(indio_dev, - LIS3L02DQ_REG_THS_L_ADDR, - value); -} - -static int lis3l02dq_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int val, - int val2, - long mask) -{ - int ret = -EINVAL, reg; - u8 uval; - s8 sval; - - switch (mask) { - case IIO_CHAN_INFO_CALIBBIAS: - if (val > 255 || val < -256) - return -EINVAL; - sval = val; - reg = lis3l02dq_axis_map[LIS3L02DQ_BIAS][chan->address]; - ret = lis3l02dq_spi_write_reg_8(indio_dev, reg, sval); - break; - case IIO_CHAN_INFO_CALIBSCALE: - if (val & ~0xFF) - return -EINVAL; - uval = val; - reg = lis3l02dq_axis_map[LIS3L02DQ_GAIN][chan->address]; - ret = lis3l02dq_spi_write_reg_8(indio_dev, reg, uval); - break; - } - return ret; -} - -static int lis3l02dq_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, - int *val2, - long mask) -{ - u8 utemp; - s8 stemp; - ssize_t ret = 0; - u8 reg; - - switch (mask) { - case IIO_CHAN_INFO_RAW: - /* Take the iio_dev status lock */ - mutex_lock(&indio_dev->mlock); - if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) { - ret = -EBUSY; - } else { - reg = lis3l02dq_axis_map - [LIS3L02DQ_ACCEL][chan->address]; - ret = lis3l02dq_read_reg_s16(indio_dev, reg, val); - } - mutex_unlock(&indio_dev->mlock); - if (ret < 0) - goto error_ret; - return IIO_VAL_INT; - case IIO_CHAN_INFO_SCALE: - *val = 0; - *val2 = 9580; - return IIO_VAL_INT_PLUS_MICRO; - case IIO_CHAN_INFO_CALIBSCALE: - reg = lis3l02dq_axis_map[LIS3L02DQ_GAIN][chan->address]; - ret = lis3l02dq_spi_read_reg_8(indio_dev, reg, &utemp); - if (ret) - goto error_ret; - /* to match with what previous code does */ - *val = utemp; - return IIO_VAL_INT; - - case IIO_CHAN_INFO_CALIBBIAS: - reg = lis3l02dq_axis_map[LIS3L02DQ_BIAS][chan->address]; - ret = lis3l02dq_spi_read_reg_8(indio_dev, reg, (u8 *)&stemp); - /* to match with what previous code does */ - *val = stemp; - return IIO_VAL_INT; - } -error_ret: - return ret; -} - -static ssize_t lis3l02dq_read_frequency(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - int ret, len = 0; - s8 t; - - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - (u8 *)&t); - if (ret) - return ret; - t &= LIS3L02DQ_DEC_MASK; - switch (t) { - case LIS3L02DQ_REG_CTRL_1_DF_128: - len = sprintf(buf, "280\n"); - break; - case LIS3L02DQ_REG_CTRL_1_DF_64: - len = sprintf(buf, "560\n"); - break; - case LIS3L02DQ_REG_CTRL_1_DF_32: - len = sprintf(buf, "1120\n"); - break; - case LIS3L02DQ_REG_CTRL_1_DF_8: - len = sprintf(buf, "4480\n"); - break; - } - return len; -} - -static ssize_t lis3l02dq_write_frequency(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - unsigned long val; - int ret; - u8 t; - - ret = kstrtoul(buf, 10, &val); - if (ret) - return ret; - - mutex_lock(&indio_dev->mlock); - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - &t); - if (ret) - goto error_ret_mutex; - /* Wipe the bits clean */ - t &= ~LIS3L02DQ_DEC_MASK; - switch (val) { - case 280: - t |= LIS3L02DQ_REG_CTRL_1_DF_128; - break; - case 560: - t |= LIS3L02DQ_REG_CTRL_1_DF_64; - break; - case 1120: - t |= LIS3L02DQ_REG_CTRL_1_DF_32; - break; - case 4480: - t |= LIS3L02DQ_REG_CTRL_1_DF_8; - break; - default: - ret = -EINVAL; - goto error_ret_mutex; - } - - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - t); - -error_ret_mutex: - mutex_unlock(&indio_dev->mlock); - - return ret ? ret : len; -} - -static int lis3l02dq_initial_setup(struct iio_dev *indio_dev) -{ - struct lis3l02dq_state *st = iio_priv(indio_dev); - int ret; - u8 val, valtest; - - st->us->mode = SPI_MODE_3; - - spi_setup(st->us); - - val = LIS3L02DQ_DEFAULT_CTRL1; - /* Write suitable defaults to ctrl1 */ - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - val); - if (ret) { - dev_err(&st->us->dev, "problem with setup control register 1"); - goto err_ret; - } - /* Repeat as sometimes doesn't work first time? */ - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - val); - if (ret) { - dev_err(&st->us->dev, "problem with setup control register 1"); - goto err_ret; - } - - /* - * Read back to check this has worked acts as loose test of correct - * chip - */ - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - &valtest); - if (ret || (valtest != val)) { - dev_err(&indio_dev->dev, - "device not playing ball %d %d\n", valtest, val); - ret = -EINVAL; - goto err_ret; - } - - val = LIS3L02DQ_DEFAULT_CTRL2; - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - val); - if (ret) { - dev_err(&st->us->dev, "problem with setup control register 2"); - goto err_ret; - } - - val = LIS3L02DQ_REG_WAKE_UP_CFG_LATCH_SRC; - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_WAKE_UP_CFG_ADDR, - val); - if (ret) - dev_err(&st->us->dev, "problem with interrupt cfg register"); -err_ret: - - return ret; -} - -static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, - lis3l02dq_read_frequency, - lis3l02dq_write_frequency); - -static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("280 560 1120 4480"); - -static irqreturn_t lis3l02dq_event_handler(int irq, void *private) -{ - struct iio_dev *indio_dev = private; - u8 t; - - s64 timestamp = iio_get_time_ns(indio_dev); - - lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_WAKE_UP_SRC_ADDR, - &t); - - if (t & LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Z_HIGH) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_Z, - IIO_EV_TYPE_THRESH, - IIO_EV_DIR_RISING), - timestamp); - - if (t & LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Z_LOW) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_Z, - IIO_EV_TYPE_THRESH, - IIO_EV_DIR_FALLING), - timestamp); - - if (t & LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Y_HIGH) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_Y, - IIO_EV_TYPE_THRESH, - IIO_EV_DIR_RISING), - timestamp); - - if (t & LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Y_LOW) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_Y, - IIO_EV_TYPE_THRESH, - IIO_EV_DIR_FALLING), - timestamp); - - if (t & LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_X_HIGH) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_X, - IIO_EV_TYPE_THRESH, - IIO_EV_DIR_RISING), - timestamp); - - if (t & LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_X_LOW) - iio_push_event(indio_dev, - IIO_MOD_EVENT_CODE(IIO_ACCEL, - 0, - IIO_MOD_X, - IIO_EV_TYPE_THRESH, - IIO_EV_DIR_FALLING), - timestamp); - - /* Ack and allow for new interrupts */ - lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_WAKE_UP_ACK_ADDR, - &t); - - return IRQ_HANDLED; -} - -static const struct iio_event_spec lis3l02dq_event[] = { - { - .type = IIO_EV_TYPE_THRESH, - .dir = IIO_EV_DIR_RISING, - .mask_separate = BIT(IIO_EV_INFO_ENABLE), - .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE), - }, { - .type = IIO_EV_TYPE_THRESH, - .dir = IIO_EV_DIR_FALLING, - .mask_separate = BIT(IIO_EV_INFO_ENABLE), - .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE), - } -}; - -#define LIS3L02DQ_CHAN(index, mod) \ - { \ - .type = IIO_ACCEL, \ - .modified = 1, \ - .channel2 = mod, \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ - BIT(IIO_CHAN_INFO_CALIBSCALE) | \ - BIT(IIO_CHAN_INFO_CALIBBIAS), \ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ - .address = index, \ - .scan_index = index, \ - .scan_type = { \ - .sign = 's', \ - .realbits = 12, \ - .storagebits = 16, \ - }, \ - .event_spec = lis3l02dq_event, \ - .num_event_specs = ARRAY_SIZE(lis3l02dq_event), \ - } - -static const struct iio_chan_spec lis3l02dq_channels[] = { - LIS3L02DQ_CHAN(0, IIO_MOD_X), - LIS3L02DQ_CHAN(1, IIO_MOD_Y), - LIS3L02DQ_CHAN(2, IIO_MOD_Z), - IIO_CHAN_SOFT_TIMESTAMP(3) -}; - -static int lis3l02dq_read_event_config(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - enum iio_event_type type, - enum iio_event_direction dir) -{ - u8 val; - int ret; - u8 mask = 1 << (chan->channel2 * 2 + (dir == IIO_EV_DIR_RISING)); - - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_WAKE_UP_CFG_ADDR, - &val); - if (ret < 0) - return ret; - - return !!(val & mask); -} - -int lis3l02dq_disable_all_events(struct iio_dev *indio_dev) -{ - int ret; - u8 control, val; - - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - &control); - - control &= ~LIS3L02DQ_REG_CTRL_2_ENABLE_INTERRUPT; - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - control); - if (ret) - goto error_ret; - /* Also for consistency clear the mask */ - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_WAKE_UP_CFG_ADDR, - &val); - if (ret) - goto error_ret; - val &= ~0x3f; - - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_WAKE_UP_CFG_ADDR, - val); - if (ret) - goto error_ret; - - ret = control; -error_ret: - return ret; -} - -static int lis3l02dq_write_event_config(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - enum iio_event_type type, - enum iio_event_direction dir, - int state) -{ - int ret = 0; - u8 val, control; - u8 currentlyset; - bool changed = false; - u8 mask = 1 << (chan->channel2 * 2 + (dir == IIO_EV_DIR_RISING)); - - mutex_lock(&indio_dev->mlock); - /* read current control */ - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - &control); - if (ret) - goto error_ret; - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_WAKE_UP_CFG_ADDR, - &val); - if (ret < 0) - goto error_ret; - currentlyset = val & mask; - - if (!currentlyset && state) { - changed = true; - val |= mask; - } else if (currentlyset && !state) { - changed = true; - val &= ~mask; - } - - if (changed) { - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_WAKE_UP_CFG_ADDR, - val); - if (ret) - goto error_ret; - control = val & 0x3f ? - (control | LIS3L02DQ_REG_CTRL_2_ENABLE_INTERRUPT) : - (control & ~LIS3L02DQ_REG_CTRL_2_ENABLE_INTERRUPT); - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - control); - if (ret) - goto error_ret; - } - -error_ret: - mutex_unlock(&indio_dev->mlock); - return ret; -} - -static struct attribute *lis3l02dq_attributes[] = { - &iio_dev_attr_sampling_frequency.dev_attr.attr, - &iio_const_attr_sampling_frequency_available.dev_attr.attr, - NULL -}; - -static const struct attribute_group lis3l02dq_attribute_group = { - .attrs = lis3l02dq_attributes, -}; - -static const struct iio_info lis3l02dq_info = { - .read_raw = &lis3l02dq_read_raw, - .write_raw = &lis3l02dq_write_raw, - .read_event_value = &lis3l02dq_read_thresh, - .write_event_value = &lis3l02dq_write_thresh, - .write_event_config = &lis3l02dq_write_event_config, - .read_event_config = &lis3l02dq_read_event_config, - .driver_module = THIS_MODULE, - .attrs = &lis3l02dq_attribute_group, -}; - -static int lis3l02dq_probe(struct spi_device *spi) -{ - int ret; - struct lis3l02dq_state *st; - struct iio_dev *indio_dev; - - indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); - if (!indio_dev) - return -ENOMEM; - st = iio_priv(indio_dev); - /* this is only used for removal purposes */ - spi_set_drvdata(spi, indio_dev); - - st->us = spi; - st->gpio = of_get_gpio(spi->dev.of_node, 0); - mutex_init(&st->buf_lock); - indio_dev->name = spi->dev.driver->name; - indio_dev->dev.parent = &spi->dev; - indio_dev->info = &lis3l02dq_info; - indio_dev->channels = lis3l02dq_channels; - indio_dev->num_channels = ARRAY_SIZE(lis3l02dq_channels); - - indio_dev->modes = INDIO_DIRECT_MODE; - - ret = lis3l02dq_configure_buffer(indio_dev); - if (ret) - return ret; - - if (spi->irq) { - ret = request_threaded_irq(st->us->irq, - &lis3l02dq_th, - &lis3l02dq_event_handler, - IRQF_TRIGGER_RISING, - "lis3l02dq", - indio_dev); - if (ret) - goto error_unreg_buffer_funcs; - - ret = lis3l02dq_probe_trigger(indio_dev); - if (ret) - goto error_free_interrupt; - } - - /* Get the device into a sane initial state */ - ret = lis3l02dq_initial_setup(indio_dev); - if (ret) - goto error_remove_trigger; - - ret = iio_device_register(indio_dev); - if (ret) - goto error_remove_trigger; - - return 0; - -error_remove_trigger: - if (spi->irq) - lis3l02dq_remove_trigger(indio_dev); -error_free_interrupt: - if (spi->irq) - free_irq(st->us->irq, indio_dev); -error_unreg_buffer_funcs: - lis3l02dq_unconfigure_buffer(indio_dev); - return ret; -} - -/* Power down the device */ -static int lis3l02dq_stop_device(struct iio_dev *indio_dev) -{ - int ret; - struct lis3l02dq_state *st = iio_priv(indio_dev); - u8 val = 0; - - mutex_lock(&indio_dev->mlock); - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - val); - if (ret) { - dev_err(&st->us->dev, "problem with turning device off: ctrl1"); - goto err_ret; - } - - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - val); - if (ret) - dev_err(&st->us->dev, "problem with turning device off: ctrl2"); -err_ret: - mutex_unlock(&indio_dev->mlock); - return ret; -} - -/* fixme, confirm ordering in this function */ -static int lis3l02dq_remove(struct spi_device *spi) -{ - struct iio_dev *indio_dev = spi_get_drvdata(spi); - struct lis3l02dq_state *st = iio_priv(indio_dev); - - iio_device_unregister(indio_dev); - - lis3l02dq_disable_all_events(indio_dev); - lis3l02dq_stop_device(indio_dev); - - if (spi->irq) - free_irq(st->us->irq, indio_dev); - - lis3l02dq_remove_trigger(indio_dev); - lis3l02dq_unconfigure_buffer(indio_dev); - - return 0; -} - -static struct spi_driver lis3l02dq_driver = { - .driver = { - .name = "lis3l02dq", - }, - .probe = lis3l02dq_probe, - .remove = lis3l02dq_remove, -}; -module_spi_driver(lis3l02dq_driver); - -MODULE_AUTHOR("Jonathan Cameron "); -MODULE_DESCRIPTION("ST LIS3L02DQ Accelerometer SPI driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("spi:lis3l02dq"); diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c b/drivers/staging/iio/accel/lis3l02dq_ring.c deleted file mode 100644 index 50c162e0c31f..000000000000 --- a/drivers/staging/iio/accel/lis3l02dq_ring.c +++ /dev/null @@ -1,428 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include "lis3l02dq.h" - -/** - * combine_8_to_16() utility function to munge two u8s into u16 - **/ -static inline u16 combine_8_to_16(u8 lower, u8 upper) -{ - u16 _lower = lower; - u16 _upper = upper; - - return _lower | (_upper << 8); -} - -/** - * lis3l02dq_data_rdy_trig_poll() the event handler for the data rdy trig - **/ -irqreturn_t lis3l02dq_data_rdy_trig_poll(int irq, void *private) -{ - struct iio_dev *indio_dev = private; - struct lis3l02dq_state *st = iio_priv(indio_dev); - - if (st->trigger_on) { - iio_trigger_poll(st->trig); - return IRQ_HANDLED; - } - - return IRQ_WAKE_THREAD; -} - -static const u8 read_all_tx_array[] = { - LIS3L02DQ_READ_REG(LIS3L02DQ_REG_OUT_X_L_ADDR), 0, - LIS3L02DQ_READ_REG(LIS3L02DQ_REG_OUT_X_H_ADDR), 0, - LIS3L02DQ_READ_REG(LIS3L02DQ_REG_OUT_Y_L_ADDR), 0, - LIS3L02DQ_READ_REG(LIS3L02DQ_REG_OUT_Y_H_ADDR), 0, - LIS3L02DQ_READ_REG(LIS3L02DQ_REG_OUT_Z_L_ADDR), 0, - LIS3L02DQ_READ_REG(LIS3L02DQ_REG_OUT_Z_H_ADDR), 0, -}; - -/** - * lis3l02dq_read_all() Reads all channels currently selected - * @indio_dev: IIO device state - * @rx_array: (dma capable) receive array, must be at least - * 4*number of channels - **/ -static int lis3l02dq_read_all(struct iio_dev *indio_dev, u8 *rx_array) -{ - struct lis3l02dq_state *st = iio_priv(indio_dev); - struct spi_transfer *xfers; - struct spi_message msg; - int ret, i, j = 0; - - xfers = kcalloc(bitmap_weight(indio_dev->active_scan_mask, - indio_dev->masklength) * 2, - sizeof(*xfers), GFP_KERNEL); - if (!xfers) - return -ENOMEM; - - mutex_lock(&st->buf_lock); - - for (i = 0; i < ARRAY_SIZE(read_all_tx_array) / 4; i++) - if (test_bit(i, indio_dev->active_scan_mask)) { - /* lower byte */ - xfers[j].tx_buf = st->tx + (2 * j); - st->tx[2 * j] = read_all_tx_array[i * 4]; - st->tx[2 * j + 1] = 0; - if (rx_array) - xfers[j].rx_buf = rx_array + (j * 2); - xfers[j].bits_per_word = 8; - xfers[j].len = 2; - xfers[j].cs_change = 1; - j++; - - /* upper byte */ - xfers[j].tx_buf = st->tx + (2 * j); - st->tx[2 * j] = read_all_tx_array[i * 4 + 2]; - st->tx[2 * j + 1] = 0; - if (rx_array) - xfers[j].rx_buf = rx_array + (j * 2); - xfers[j].bits_per_word = 8; - xfers[j].len = 2; - xfers[j].cs_change = 1; - j++; - } - - /* After these are transmitted, the rx_buff should have - * values in alternate bytes - */ - spi_message_init(&msg); - for (j = 0; j < bitmap_weight(indio_dev->active_scan_mask, - indio_dev->masklength) * 2; j++) - spi_message_add_tail(&xfers[j], &msg); - - ret = spi_sync(st->us, &msg); - mutex_unlock(&st->buf_lock); - kfree(xfers); - - return ret; -} - -static int lis3l02dq_get_buffer_element(struct iio_dev *indio_dev, - u8 *buf) -{ - int ret, i; - u8 *rx_array; - s16 *data = (s16 *)buf; - int scan_count = bitmap_weight(indio_dev->active_scan_mask, - indio_dev->masklength); - - rx_array = kcalloc(4, scan_count, GFP_KERNEL); - if (!rx_array) - return -ENOMEM; - ret = lis3l02dq_read_all(indio_dev, rx_array); - if (ret < 0) { - kfree(rx_array); - return ret; - } - for (i = 0; i < scan_count; i++) - data[i] = combine_8_to_16(rx_array[i * 4 + 1], - rx_array[i * 4 + 3]); - kfree(rx_array); - - return i * sizeof(data[0]); -} - -static irqreturn_t lis3l02dq_trigger_handler(int irq, void *p) -{ - struct iio_poll_func *pf = p; - struct iio_dev *indio_dev = pf->indio_dev; - int len = 0; - char *data; - - data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); - if (!data) - goto done; - - if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength)) - len = lis3l02dq_get_buffer_element(indio_dev, data); - - iio_push_to_buffers_with_timestamp(indio_dev, data, pf->timestamp); - - kfree(data); -done: - iio_trigger_notify_done(indio_dev->trig); - return IRQ_HANDLED; -} - -/* Caller responsible for locking as necessary. */ -static int -__lis3l02dq_write_data_ready_config(struct iio_dev *indio_dev, bool state) -{ - int ret; - u8 valold; - bool currentlyset; - struct lis3l02dq_state *st = iio_priv(indio_dev); - - /* Get the current event mask register */ - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - &valold); - if (ret) - goto error_ret; - /* Find out if data ready is already on */ - currentlyset - = valold & LIS3L02DQ_REG_CTRL_2_ENABLE_DATA_READY_GENERATION; - - /* Disable requested */ - if (!state && currentlyset) { - /* Disable the data ready signal */ - valold &= ~LIS3L02DQ_REG_CTRL_2_ENABLE_DATA_READY_GENERATION; - - /* The double write is to overcome a hardware bug? */ - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - valold); - if (ret) - goto error_ret; - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - valold); - if (ret) - goto error_ret; - st->trigger_on = false; - /* Enable requested */ - } else if (state && !currentlyset) { - /* If not set, enable requested - * first disable all events - */ - ret = lis3l02dq_disable_all_events(indio_dev); - if (ret < 0) - goto error_ret; - - valold = ret | - LIS3L02DQ_REG_CTRL_2_ENABLE_DATA_READY_GENERATION; - - st->trigger_on = true; - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_2_ADDR, - valold); - if (ret) - goto error_ret; - } - - return 0; -error_ret: - return ret; -} - -/** - * lis3l02dq_data_rdy_trigger_set_state() set datardy interrupt state - * - * If disabling the interrupt also does a final read to ensure it is clear. - * This is only important in some cases where the scan enable elements are - * switched before the buffer is reenabled. - **/ -static int lis3l02dq_data_rdy_trigger_set_state(struct iio_trigger *trig, - bool state) -{ - struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); - int ret = 0; - u8 t; - - __lis3l02dq_write_data_ready_config(indio_dev, state); - if (!state) { - /* - * A possible quirk with the handler is currently worked around - * by ensuring outstanding read events are cleared. - */ - ret = lis3l02dq_read_all(indio_dev, NULL); - } - lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_WAKE_UP_SRC_ADDR, - &t); - return ret; -} - -/** - * lis3l02dq_trig_try_reen() try reenabling irq for data rdy trigger - * @trig: the datardy trigger - */ -static int lis3l02dq_trig_try_reen(struct iio_trigger *trig) -{ - struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); - struct lis3l02dq_state *st = iio_priv(indio_dev); - int i; - - /* If gpio still high (or high again) - * In theory possible we will need to do this several times - */ - for (i = 0; i < 5; i++) - if (gpio_get_value(st->gpio)) - lis3l02dq_read_all(indio_dev, NULL); - else - break; - if (i == 5) - pr_info("Failed to clear the interrupt for lis3l02dq\n"); - - /* irq reenabled so success! */ - return 0; -} - -static const struct iio_trigger_ops lis3l02dq_trigger_ops = { - .owner = THIS_MODULE, - .set_trigger_state = &lis3l02dq_data_rdy_trigger_set_state, - .try_reenable = &lis3l02dq_trig_try_reen, -}; - -int lis3l02dq_probe_trigger(struct iio_dev *indio_dev) -{ - int ret; - struct lis3l02dq_state *st = iio_priv(indio_dev); - - st->trig = iio_trigger_alloc("lis3l02dq-dev%d", indio_dev->id); - if (!st->trig) { - ret = -ENOMEM; - goto error_ret; - } - - st->trig->dev.parent = &st->us->dev; - st->trig->ops = &lis3l02dq_trigger_ops; - iio_trigger_set_drvdata(st->trig, indio_dev); - ret = iio_trigger_register(st->trig); - if (ret) - goto error_free_trig; - - return 0; - -error_free_trig: - iio_trigger_free(st->trig); -error_ret: - return ret; -} - -void lis3l02dq_remove_trigger(struct iio_dev *indio_dev) -{ - struct lis3l02dq_state *st = iio_priv(indio_dev); - - iio_trigger_unregister(st->trig); - iio_trigger_free(st->trig); -} - -void lis3l02dq_unconfigure_buffer(struct iio_dev *indio_dev) -{ - iio_dealloc_pollfunc(indio_dev->pollfunc); - iio_kfifo_free(indio_dev->buffer); -} - -static int lis3l02dq_buffer_postenable(struct iio_dev *indio_dev) -{ - /* Disable unwanted channels otherwise the interrupt will not clear */ - u8 t; - int ret; - bool oneenabled = false; - - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - &t); - if (ret) - goto error_ret; - - if (test_bit(0, indio_dev->active_scan_mask)) { - t |= LIS3L02DQ_REG_CTRL_1_AXES_X_ENABLE; - oneenabled = true; - } else { - t &= ~LIS3L02DQ_REG_CTRL_1_AXES_X_ENABLE; - } - if (test_bit(1, indio_dev->active_scan_mask)) { - t |= LIS3L02DQ_REG_CTRL_1_AXES_Y_ENABLE; - oneenabled = true; - } else { - t &= ~LIS3L02DQ_REG_CTRL_1_AXES_Y_ENABLE; - } - if (test_bit(2, indio_dev->active_scan_mask)) { - t |= LIS3L02DQ_REG_CTRL_1_AXES_Z_ENABLE; - oneenabled = true; - } else { - t &= ~LIS3L02DQ_REG_CTRL_1_AXES_Z_ENABLE; - } - if (!oneenabled) /* what happens in this case is unknown */ - return -EINVAL; - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - t); - if (ret) - goto error_ret; - - return iio_triggered_buffer_postenable(indio_dev); -error_ret: - return ret; -} - -/* Turn all channels on again */ -static int lis3l02dq_buffer_predisable(struct iio_dev *indio_dev) -{ - u8 t; - int ret; - - ret = iio_triggered_buffer_predisable(indio_dev); - if (ret) - goto error_ret; - - ret = lis3l02dq_spi_read_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - &t); - if (ret) - goto error_ret; - t |= LIS3L02DQ_REG_CTRL_1_AXES_X_ENABLE | - LIS3L02DQ_REG_CTRL_1_AXES_Y_ENABLE | - LIS3L02DQ_REG_CTRL_1_AXES_Z_ENABLE; - - ret = lis3l02dq_spi_write_reg_8(indio_dev, - LIS3L02DQ_REG_CTRL_1_ADDR, - t); - -error_ret: - return ret; -} - -static const struct iio_buffer_setup_ops lis3l02dq_buffer_setup_ops = { - .postenable = &lis3l02dq_buffer_postenable, - .predisable = &lis3l02dq_buffer_predisable, -}; - -int lis3l02dq_configure_buffer(struct iio_dev *indio_dev) -{ - int ret; - struct iio_buffer *buffer; - - buffer = iio_kfifo_allocate(); - if (!buffer) - return -ENOMEM; - - iio_device_attach_buffer(indio_dev, buffer); - - buffer->scan_timestamp = true; - indio_dev->setup_ops = &lis3l02dq_buffer_setup_ops; - - /* Functions are NULL as we set handler below */ - indio_dev->pollfunc = iio_alloc_pollfunc(&iio_pollfunc_store_time, - &lis3l02dq_trigger_handler, - 0, - indio_dev, - "lis3l02dq_consumer%d", - indio_dev->id); - - if (!indio_dev->pollfunc) { - ret = -ENOMEM; - goto error_iio_sw_rb_free; - } - - indio_dev->modes |= INDIO_BUFFER_TRIGGERED; - return 0; - -error_iio_sw_rb_free: - iio_kfifo_free(indio_dev->buffer); - return ret; -}