From: H Hartley Sweeten Date: Wed, 7 Oct 2015 22:31:09 +0000 (-0700) Subject: staging: comedi: gsc_hpdi: use preferred kernel types X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=fca0b7dcfb20e9ca22dea0fdf551a7995cb3f2a4;p=linux-beck.git staging: comedi: gsc_hpdi: use preferred kernel types Fix the checkpatch.pl issues about: CHECK: Prefer kernel type 'u32' over 'uint32_t' CHECK: Prefer kernel type 'u8' over 'uint8_t' Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c index e9296182236e..46ca5d938d5b 100644 --- a/drivers/staging/comedi/drivers/gsc_hpdi.c +++ b/drivers/staging/comedi/drivers/gsc_hpdi.c @@ -125,7 +125,7 @@ struct hpdi_private { void __iomem *plx9080_mmio; - uint32_t *dio_buffer[NUM_DMA_BUFFERS]; /* dma buffers */ + u32 *dio_buffer[NUM_DMA_BUFFERS]; /* dma buffers */ /* physical addresses of dma buffers */ dma_addr_t dio_buffer_phys_addr[NUM_DMA_BUFFERS]; /* @@ -137,7 +137,7 @@ struct hpdi_private { dma_addr_t dma_desc_phys_addr; unsigned int num_dma_descriptors; /* pointer to start of buffers indexed by descriptor */ - uint32_t *desc_dio_buffer[NUM_DMA_DESCRIPTORS]; + u32 *desc_dio_buffer[NUM_DMA_DESCRIPTORS]; /* index of the dma descriptor that is currently being used */ unsigned int dma_desc_index; unsigned int tx_fifo_size; @@ -169,7 +169,7 @@ static void gsc_hpdi_drain_dma(struct comedi_device *dev, unsigned int channel) for (desc = 0; (next < start || next >= start + devpriv->block_size) && desc < devpriv->num_dma_descriptors; desc++) { /* transfer data from dma buffer to comedi buffer */ - size = devpriv->block_size / sizeof(uint32_t); + size = devpriv->block_size / sizeof(u32); if (cmd->stop_src == TRIG_COUNT) { if (size > devpriv->dio_count) size = devpriv->dio_count; @@ -192,10 +192,10 @@ static irqreturn_t gsc_hpdi_interrupt(int irq, void *d) struct hpdi_private *devpriv = dev->private; struct comedi_subdevice *s = dev->read_subdev; struct comedi_async *async = s->async; - uint32_t hpdi_intr_status, hpdi_board_status; - uint32_t plx_status; - uint32_t plx_bits; - uint8_t dma0_status, dma1_status; + u32 hpdi_intr_status, hpdi_board_status; + u32 plx_status; + u32 plx_bits; + u8 dma0_status, dma1_status; unsigned long flags; if (!dev->attached) @@ -290,7 +290,7 @@ static int gsc_hpdi_cmd(struct comedi_device *dev, struct comedi_async *async = s->async; struct comedi_cmd *cmd = &async->cmd; unsigned long flags; - uint32_t bits; + u32 bits; if (s->io_bits) return -EINVAL; @@ -424,15 +424,15 @@ static int gsc_hpdi_setup_dma_descriptors(struct comedi_device *dev, { struct hpdi_private *devpriv = dev->private; dma_addr_t phys_addr = devpriv->dma_desc_phys_addr; - uint32_t next_bits = PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT | - PLX_XFER_LOCAL_TO_PCI; + u32 next_bits = PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT | + PLX_XFER_LOCAL_TO_PCI; unsigned int offset = 0; unsigned int idx = 0; unsigned int i; if (len > DMA_BUFFER_SIZE) len = DMA_BUFFER_SIZE; - len -= len % sizeof(uint32_t); + len -= len % sizeof(u32); if (len == 0) return -EINVAL; @@ -445,7 +445,7 @@ static int gsc_hpdi_setup_dma_descriptors(struct comedi_device *dev, (i + 1) * sizeof(devpriv->dma_desc[0])) | next_bits); devpriv->desc_dio_buffer[i] = devpriv->dio_buffer[idx] + - (offset / sizeof(uint32_t)); + (offset / sizeof(u32)); offset += len; if (len + offset > DMA_BUFFER_SIZE) { @@ -516,7 +516,7 @@ static void gsc_hpdi_free_dma(struct comedi_device *dev) static int gsc_hpdi_init(struct comedi_device *dev) { struct hpdi_private *devpriv = dev->private; - uint32_t plx_intcsr_bits; + u32 plx_intcsr_bits; /* wait 10usec after reset before accessing fifos */ writel(BOARD_RESET_BIT, dev->mmio + BOARD_CONTROL_REG); @@ -546,7 +546,7 @@ static int gsc_hpdi_init(struct comedi_device *dev) static void gsc_hpdi_init_plx9080(struct comedi_device *dev) { struct hpdi_private *devpriv = dev->private; - uint32_t bits; + u32 bits; void __iomem *plx_iobase = devpriv->plx9080_mmio; #ifdef __BIG_ENDIAN