From: Javier Martinez Canillas Date: Wed, 22 Feb 2017 18:23:22 +0000 (-0300) Subject: usb: phy: isp1301: Add OF device ID table X-Git-Tag: v4.11-rc2~9^2~13 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=fd567653bdb9;p=karo-tx-linux.git usb: phy: isp1301: Add OF device ID table The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c index db68156568e6..b3b33cf7ddf6 100644 --- a/drivers/usb/phy/phy-isp1301.c +++ b/drivers/usb/phy/phy-isp1301.c @@ -33,6 +33,12 @@ static const struct i2c_device_id isp1301_id[] = { }; MODULE_DEVICE_TABLE(i2c, isp1301_id); +static const struct of_device_id isp1301_of_match[] = { + {.compatible = "nxp,isp1301" }, + { }, +}; +MODULE_DEVICE_TABLE(of, isp1301_of_match); + static struct i2c_client *isp1301_i2c_client; static int __isp1301_write(struct isp1301 *isp, u8 reg, u8 value, u8 clear) @@ -130,6 +136,7 @@ static int isp1301_remove(struct i2c_client *client) static struct i2c_driver isp1301_driver = { .driver = { .name = DRV_NAME, + .of_match_table = of_match_ptr(isp1301_of_match), }, .probe = isp1301_probe, .remove = isp1301_remove,