From: Marek Vasut <marex@denx.de>
Date: Tue, 9 May 2017 14:02:33 +0000 (-0500)
Subject: ARM: dts: socfpga: Remove I2C EEPROMs from VINING FPGA
X-Git-Tag: v4.13-rc1~168^2~2^2~3
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ff3d90decb64fd90598cca8244d2c67e452d793e;p=karo-tx-linux.git

ARM: dts: socfpga: Remove I2C EEPROMs from VINING FPGA

Remove the EEPROMs attached to the I2C expander ports which
lead to the backplane slots from the main VIN|ING DTS file.
These EEPROMs are bound using separate DTO files, which lets
us handle both two-slot and six-slot configuration of the
backplane.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---

diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
index cb4bdbcf54ee..268785ecb82a 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -203,69 +203,39 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
-			eeprom@51 {
-				compatible = "at,24c01";
-				pagesize = <8>;
-				reg = <0x51>;
-			};
 		};
 
 		i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
-			eeprom@51 {
-				compatible = "at,24c01";
-				pagesize = <8>;
-				reg = <0x51>;
-			};
 		};
 
 		i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			eeprom@51 {
-				compatible = "at,24c01";
-				pagesize = <8>;
-				reg = <0x51>;
-			};
 		};
 
 		i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
-			eeprom@51 {
-				compatible = "at,24c01";
-				pagesize = <8>;
-				reg = <0x51>;
-			};
 		};
 
 		i2c@4 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
-			eeprom@51 {
-				compatible = "at,24c01";
-				pagesize = <8>;
-				reg = <0x51>;
-			};
 		};
 
 		i2c@5 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
-			eeprom@51 {
-				compatible = "at,24c01";
-				pagesize = <8>;
-				reg = <0x51>;
-			};
 		};
 
-		i2c@6 {
+		i2c@6 {	/* Backplane EEPROM */
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <6>;
@@ -276,7 +246,7 @@
 			};
 		};
 
-		i2c@7 {
+		i2c@7 {	/* Power board EEPROM */
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <7>;