From: Rabeeh Khoury <rabeeh@solid-run.com>
Date: Mon, 2 Mar 2015 20:03:59 +0000 (+0000)
Subject: ARM: dts: hummingboard: Setup pwm lines
X-Git-Tag: v4.1-rc1~45^2~2^2~4
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ffbae6b719227662f3baca349d1e17ac7e652ec4;p=karo-tx-linux.git

ARM: dts: hummingboard: Setup pwm lines

Setup pwm lines as follows -
pwm1: In case HummingBoard base carrier; this pin drives through a serial
      capacitor the mono out of the audio jack.
      In case HummingBoard pro the this pad can be reached by wiring to
      C8 capacitors on the board.
pwm2: Setup pwm2 on gpio-1 but leave the default function of the iopad as
      a gpio.
      The user can change the io pad mux in user space and therefore use
      this function on gpio-1 (pin number 7 on the 26 pin header).
pwm3,pwm4: unused

Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
[tweaked alias for pwm pinctrl group --rmk]
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---

diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 93588c987d2c..7ee95223bf3d 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -164,6 +164,10 @@
 			>;
 		};
 
+		pinctrl_hummingboard_pwm1: pwm1grp {
+			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>;
+		};
+
 		pinctrl_hummingboard_spdif: hummingboard-spdif {
 			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
 		};
@@ -203,6 +207,17 @@
 	};
 };
 
+&pwm1 {
+	 pinctrl-names = "default";
+	 pinctrl-0 = <&pinctrl_hummingboard_pwm1>;
+	 status = "okay";
+};
+
+&pwm2 {
+	 pinctrl-names = "default";
+	 status = "okay";
+};
+
 &spdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hummingboard_spdif>;