From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Wed, 17 Jun 2015 08:38:56 +0000 (+0200)
Subject: ARM: shmobile: armadillo800eva dts: Add pinctrl and gpio-hog for lcdc0
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ffd2f9a5afb730b9f6c1d1938934213c3cfcf249;p=linux-beck.git

ARM: shmobile: armadillo800eva dts: Add pinctrl and gpio-hog for lcdc0

Configure pinctrl and a GPIO-controller board mux for LCD use.
This allows the armadillo800eva board staging code to enable lcdc0.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---

diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 2e31d8c01cbf..105d9c95de4a 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -224,6 +224,9 @@
 };
 
 &pfc {
+	pinctrl-0 = <&lcd0_pins>;
+	pinctrl-names = "default";
+
 	ether_pins: ether {
 		renesas,groups = "gether_mii", "gether_int";
 		renesas,function = "gether";
@@ -259,6 +262,16 @@
 				 "fsia_data_in_1", "fsia_data_out_0";
 		renesas,function = "fsia";
 	};
+
+	lcd0_pins: lcd0 {
+		renesas,groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync";
+		renesas,function = "lcd0";
+
+		/* DBGMD/LCDC0/FSIA MUX */
+		gpio-hog;
+		gpios = <176 0>;
+		output-high;
+	};
 };
 
 &tpu {