From: Arnd Bergmann <arnd@arndb.de>
Date: Mon, 16 Mar 2015 14:36:44 +0000 (+0100)
Subject: Merge tag 'renesas-da9063-da9210-quirk-for-v4.1' of git://git.kernel.org/pub/scm... 
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ffe971ef40ca147ab0443ea12ed4fc552bb28498;p=linux-beck.git

Merge tag 'renesas-da9063-da9210-quirk-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Merge "Renesas ARM Based SoC da9063/da9210 Regulator Quirk for v4.1" from Simon Horman:

The r8a7790/lager and r8a7791/koelsch development boards have da9063 and
da9210 regulators.  Both regulators have their interrupt request lines
tied to the same interrupt pin (IRQ2) on the SoC.

After cold boot or da9063-induced restart, both the da9063 and da9210
seem to assert their interrupt request lines.  Hence as soon as one
driver requests this irq, it gets stuck in an interrupt storm, as it
only manages to deassert its own interrupt request line, and the other
driver hasn't installed an interrupt handler yet.

To handle this, install a quirk that masks the interrupts in both the
da9063 and da9210.  This quirk has to run after the i2c master driver
has been initialized, but before the i2c slave drivers are initialized.
As it depends on i2c, select I2C if one of the affected platforms is
enabled in the kernel config.

* tag 'renesas-da9063-da9210-quirk-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: lager: Add da9063 PMIC device node for system restart
  ARM: shmobile: lager dts: Add da9210 regulator interrupt
  ARM: shmobile: koelsch: Add da9063 PMIC device node for system restart
  ARM: shmobile: koelsch dts: Add da9210 regulator interrupt
  ARM: shmobile: R-Car Gen2: Add da9063/da9210 regulator quirk
---

ffe971ef40ca147ab0443ea12ed4fc552bb28498