From: Keith Packard Date: Wed, 2 Nov 2011 02:54:11 +0000 (-0700) Subject: drm/i915: Treat PCH eDP like DP in most places X-Git-Tag: v3.2-rc3~8^2~5^2~8 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=v3.1-5461-g417e822;p=karo-tx-linux.git drm/i915: Treat PCH eDP like DP in most places PCH eDP has many of the same needs as regular PCH DP connections, including the DP_CTl bit settings, the TRANS_DP_CTL register. Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes --- diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 591eb0ed3110..e77a863a3833 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2933,7 +2933,8 @@ static void ironlake_pch_enable(struct drm_crtc *crtc) /* For PCH DP, enable TRANS_DP_CTL */ if (HAS_PCH_CPT(dev) && - intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { + (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || + intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) { u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5; reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 2c0c482222e1..d1eabd4165c4 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -766,10 +766,10 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, continue; intel_dp = enc_to_intel_dp(encoder); - if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT) { + if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || is_pch_edp(intel_dp)) { lane_count = intel_dp->lane_count; break; - } else if (is_edp(intel_dp)) { + } else if (is_cpu_edp(intel_dp)) { lane_count = dev_priv->edp.lanes; break; } @@ -808,6 +808,7 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; struct intel_dp *intel_dp = enc_to_intel_dp(encoder); struct drm_crtc *crtc = intel_dp->base.base.crtc; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); @@ -820,18 +821,31 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, ironlake_edp_pll_off(encoder); } - intel_dp->DP = DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; - intel_dp->DP |= intel_dp->color_range; + /* + * There are three kinds of DP registers: + * + * IBX PCH + * CPU + * CPT PCH + * + * IBX PCH and CPU are the same for almost everything, + * except that the CPU DP PLL is configured in this + * register + * + * CPT PCH is quite different, having many bits moved + * to the TRANS_DP_CTL register instead. That + * configuration happens (oddly) in ironlake_pch_enable + */ - if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) - intel_dp->DP |= DP_SYNC_HS_HIGH; - if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) - intel_dp->DP |= DP_SYNC_VS_HIGH; + /* Preserve the BIOS-computed detected bit. This is + * supposed to be read-only. + */ + intel_dp->DP = I915_READ(intel_dp->output_reg) & DP_DETECTED; + intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) - intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; - else - intel_dp->DP |= DP_LINK_TRAIN_OFF; + /* Handle DP bits in common between all three register formats */ + + intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; switch (intel_dp->lane_count) { case 1: @@ -850,32 +864,45 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE; intel_write_eld(encoder, adjusted_mode); } - memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE); intel_dp->link_configuration[0] = intel_dp->link_bw; intel_dp->link_configuration[1] = intel_dp->lane_count; intel_dp->link_configuration[8] = DP_SET_ANSI_8B10B; - /* * Check for DPCD version > 1.1 and enhanced framing support */ if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) { intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; - intel_dp->DP |= DP_ENHANCED_FRAMING; } - /* CPT DP's pipe select is decided in TRANS_DP_CTL */ - if (intel_crtc->pipe == 1 && !HAS_PCH_CPT(dev)) - intel_dp->DP |= DP_PIPEB_SELECT; + /* Split out the IBX/CPU vs CPT settings */ - if (is_cpu_edp(intel_dp)) { - /* don't miss out required setting for eDP */ - intel_dp->DP |= DP_PLL_ENABLE; - if (adjusted_mode->clock < 200000) - intel_dp->DP |= DP_PLL_FREQ_160MHZ; - else - intel_dp->DP |= DP_PLL_FREQ_270MHZ; + if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) { + intel_dp->DP |= intel_dp->color_range; + + if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) + intel_dp->DP |= DP_SYNC_HS_HIGH; + if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) + intel_dp->DP |= DP_SYNC_VS_HIGH; + intel_dp->DP |= DP_LINK_TRAIN_OFF; + + if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN) + intel_dp->DP |= DP_ENHANCED_FRAMING; + + if (intel_crtc->pipe == 1) + intel_dp->DP |= DP_PIPEB_SELECT; + + if (is_cpu_edp(intel_dp)) { + /* don't miss out required setting for eDP */ + intel_dp->DP |= DP_PLL_ENABLE; + if (adjusted_mode->clock < 200000) + intel_dp->DP |= DP_PLL_FREQ_160MHZ; + else + intel_dp->DP |= DP_PLL_FREQ_270MHZ; + } + } else { + intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; } } @@ -1341,6 +1368,7 @@ static char *link_train_names[] = { * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB */ #define I830_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_800 +#define I830_DP_VOLTAGE_MAX_CPT DP_TRAIN_VOLTAGE_SWING_1200 static uint8_t intel_dp_pre_emphasis_max(uint8_t voltage_swing) @@ -1378,8 +1406,12 @@ intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_ST p = this_p; } - if (v >= I830_DP_VOLTAGE_MAX) - v = I830_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED; + if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + voltage_max = I830_DP_VOLTAGE_MAX_CPT; + else + voltage_max = I830_DP_VOLTAGE_MAX; + if (v >= voltage_max) + v = voltage_max | DP_TRAIN_MAX_SWING_REACHED; if (p >= intel_dp_pre_emphasis_max(v)) p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; @@ -1570,7 +1602,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ uint8_t link_status[DP_LINK_STATUS_SIZE]; uint32_t signal_levels; - if (IS_GEN6(dev) && is_edp(intel_dp)) { + + if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { @@ -1650,12 +1683,11 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) break; } - if (IS_GEN6(dev) && is_edp(intel_dp)) { + if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]); - DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n", signal_levels); DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } @@ -1741,8 +1773,12 @@ intel_dp_link_down(struct intel_dp *intel_dp) msleep(17); - if (is_edp(intel_dp)) - DP |= DP_LINK_TRAIN_OFF; + if (is_edp(intel_dp)) { + if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + DP |= DP_LINK_TRAIN_OFF_CPT; + else + DP |= DP_LINK_TRAIN_OFF; + } if (!HAS_PCH_CPT(dev) && I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) { @@ -2186,7 +2222,8 @@ intel_trans_dp_port_sel(struct drm_crtc *crtc) continue; intel_dp = enc_to_intel_dp(encoder); - if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT) + if (intel_dp->base.type == INTEL_OUTPUT_DISPLAYPORT || + intel_dp->base.type == INTEL_OUTPUT_EDP) return intel_dp->output_reg; }