]> git.karo-electronics.de Git - karo-tx-linux.git/history - arch
ENGR00177281-5 WM8962: add record feature
[karo-tx-linux.git] / arch /
2013-05-24 Gary ZhangENGR00177581-4 MX6: add wm8962 mic support
2013-05-24 Fugang DuanENGR00160472 - MX6: add Ethernet ANSI/IEEE 802.2 LLC...
2013-05-24 Anson HuangENGR00178646-2 [MX6]Add SD1 and SD2 to interactive...
2013-05-24 Wayne ZouENGR00175724-1 IPU: change ipu_device thread process...
2013-05-24 Ranjani VaidyanathanENGR00178763: MX6-Fix TO1.0 boot-fail issue
2013-05-24 Alejandro SierraENGR00178584 uart3 pins configuration
2013-05-24 Robin GongENGR00178629 i.MX6 sabresd:support software power off...
2013-05-24 Alejandro SierraENGR00178582 Remove uart2 early parameter
2013-05-24 Danny NoldENGR00178581 - EPDC fb: Fix regulator-related EPDC...
2013-05-24 Ranjani VaidyanathanENGR00176366: MX6-Switch ARM_CLK to PLL2_400MHz when...
2013-05-24 Zhang JiejingENGR00178552 MX6XX_SABRESD: update pin mux for revB...
2013-05-24 Anson HuangENGR00178505 [MX6]Enable performance and ondemand governor
2013-05-24 Fugang DuanENGR00177932 - i.MX6 sabresd : Recorrect fec phy AR8031...
2013-05-24 Danny NoldENGR00178458 - WM8962 regulator constraint fix to preve...
2013-05-24 Richard ZhuENGR00178128 mx6 pcie: pass PCIEX1 CT network card...
2013-05-24 Frank LiENGR00178106 SabreSD: scan emmc slot sd4 firstly for...
2013-05-24 Peter ChenENGR00177875 mx6: pm: disable USB VBUS wakeup to avoid...
2013-05-24 Peter ChenENGR00177771 usb: usb wakeup enable should include...
2013-05-24 Jason LiuENGR00178118-2 fix some build warnings when using GCC...
2013-05-24 Tony LinENGR00177058 mx6 sabreauto: enable tvin function
2013-05-24 make shiENGR00178061 mx6 sabresd:fix GPIO warning when board...
2013-05-24 Lily ZhangENGR00177983 mx6solo sabreauto: set hdmi display id...
2013-05-24 Alejandro SierraENGR00177856 Accelerometer support for ARD
2013-05-24 Terry LvENGR00177643: Add mlb initial code to mx6 ard board
2013-05-24 make shiENGR00177884-2 mx6q sabresd: config USB pin according...
2013-05-24 make shiENGR00177884-1 mx6q sabresd: config USB pin according...
2013-05-24 Lily ZhangENGR00177787 mx6 sabreauto: add light sensor isl29023...
2013-05-24 Anson HuangENGR00176177-3 Enable interactive governor by default
2013-05-24 Anson HuangENGR00176177-1 Add irq count mechanism to interactive...
2013-05-24 Anson HuangENGR00177745-2 Add interactive cpufreq governor
2013-05-24 Anson HuangENGR00177757 Fix suspend/resume issue when enable local...
2013-05-24 Robin GongENGR00177748 pfuze100 mx6q_sabreSD: keep VGEN4 and...
2013-05-24 Prabhu SundararajENGR00177716 i.mx Sabreauto : SD Card on Mainboard...
2013-05-24 Lily ZhangENGR00177780 mx6dl sabresd: add USB support for RevB...
2013-05-24 Hake HuangENGR00177737-2: add HDMI sii902x support in mx6q-arm2
2013-05-24 Gary ZhangENGR00177581-2 MX6_SABRESD: add wm8962 support
2013-05-24 Gary ZhangENGR00177581-1 MX6: add wm8962 in defconfig
2013-05-24 Lily ZhangENGR00177310-4 i.mx6 sabresd: change fb_data sequence
2013-05-24 Lily ZhangENGR00177310-2 mx6 clock: change _clk_clko_round_rate
2013-05-24 Lily ZhangENGR00177310-1 i.mx6dl sabresd: add camera support
2013-05-24 Danny NoldENGR00177359 - EPDC fb: Add EPDC support to SabreSD...
2013-05-24 Tony LIUENGR00176299-1 usb host suspend/resume can't work randomly
2013-05-24 Lily ZhangENGR00177083-6 i.mx6: sabresd: change gpio configuration
2013-05-24 Lily ZhangENGR00177083-5 i.mx6: sabresd: add initial i.mx6dl...
2013-05-24 Lily ZhangENGR00177083-4 i.mx6: sabresd: add i.mx6dl pad table
2013-05-24 Lily ZhangENGR00177083-3 i.mx6: sabresd: move the pad table to...
2013-05-24 Lily ZhangENGR00177083-2 i.mx6: sabresd: move pfuse declaration...
2013-05-24 Lily ZhangENGR00177083-1 i.mx6: sabresd: remove the prefix MX6Q...
2013-05-24 Fugang DuanENGR00177186 - MX6 : modify board_is_mx6_xxx macro.
2013-05-24 make shiENGR00177154 solo sabreauto: config USB pin according...
2013-05-24 Allen XuENGR00177082 mx6 sabreauto: enable NAND by default
2013-05-24 Zhang JiejingENGR00176974 MX6Q: make 624M WP work, change 624 WP...
2013-05-24 Lily ZhangENGR00176812-11 mx6 sabreauto: remove section mismatch...
2013-05-24 Lily ZhangENGR00176812-10 mx6solo sabreauto: change display for...
2013-05-24 Adrian AlonsoENGR00176812-9 mx6 sabreauto: add revB board support
2013-05-24 Lily ZhangENGR00176812-8 mx6 sabreauto: add board_is_mx6_xxx...
2013-05-24 Lily ZhangENGR00176812-7 mx6 sabreauto: remove MX6Q_PAD_EIM_EB2__...
2013-05-24 Jason LiuENGR00176812-6 i.mx: sabreauto: add initial i.mx6solo...
2013-05-24 Jason LiuENGR00176812-5 i.mx6: sabreauto: add the i.mx6solo...
2013-05-24 Jason LiuENGR00176812-4 i.mx6: sabreauto: move all the pad table...
2013-05-24 Jason LiuENGR00176812-3 i.mx6: sabreauto: move some declarations...
2013-05-24 Jason LiuENGR00176812-2 i.mx6: sabreauto: remove the prefix...
2013-05-24 Jason LiuENGR00176812-1 i.mx6: sabreauto: cosmetic code alignmen...
2013-05-24 Terry LvENGR00176469-4: Remove build warnings in clock.c
2013-05-24 Robin GongENGR00176649-2 sabrelite_SD ARD pfuze: update board...
2013-05-24 Terry LvENGR00176469-3: Remove build warnings in mlb
2013-05-24 Terry LvENGR00176469-1: Improve the performance of MLB
2013-05-24 Wu GuoxingENGR00176655:mx6:remove openvg_axi_clk from gpu2d_axi_c...
2013-05-24 Robin GongENGR00176571 MX6DL: Added support for 1.2GHz ARM Frequency
2013-05-24 Anson HuangENGR00176160 [MX6]Correct PLL1 freq change flow
2013-05-24 Peter ChenENGR00176147-2: usb: pass the wakeup event to pdata
2013-05-24 Xinyu ChenENGR00176068-3 defconfig: enable localtimer in defconfig
2013-05-24 Xinyu ChenENGR00176068-2 smp_twd: reconfigure clockevents after...
2013-05-24 Xinyu ChenENGR00176068-1 mx6q: add smp_twd clock for localtimer
2013-05-24 Ryan QIANENGR00176279 [MX6DL] MMC: improve SD3.0 SDR104 mode...
2013-05-24 Lin FuzhenENGR00174062 CCM: change clock enable_count to usecount
2013-05-24 Ranjani VaidyanathanENGR00176136- MX6: Added support for 1.2GHz ARM Frequency
2013-05-24 Zhang JiejingENGR00176175 MX6Q: fix typo in cpu op voltage setting.
2013-05-24 Lionel XuENGR00170526-1 MX6Q_Sabreauto: remove audio platform...
2013-05-24 Francisco MunozENGR00175551:Update sabreauto board file for handling...
2013-05-24 Yuxi SunENGR00175947 camera: sensor mclk change name to clko_clk
2013-05-24 Gary ZhangENGR00175219-6 MX6Q_SABRESD: add clko_clk support
2013-05-24 Gary ZhangENGR00175219-5 MX6: remove cko1_clk in clock.c
2013-05-24 Zhang JiejingENGR00175826 defconfig: add mx6q_sabresd in updater...
2013-05-24 Huang ShijieENGR00175824 fix the wrong patch for arch/arm/include...
2013-05-24 Ryan QIANENGR00175692-02 [MX6DL] SD3.0: can not recognize SD3...
2013-05-24 Gary ZhangENGR00175219-2 MX6Q_SABRESD: add wm8958 support
2013-05-24 Gary ZhangENGR00175219-1 MX6: add wm8958 option in defconfig
2013-05-24 Liu YingENGR00175222-1 IPUv3 pdev:Check fb size before reserve...
2013-05-24 Larry LiENGR00174905 [MX6] gc355 can't work after specific...
2013-05-24 Danny NoldENGR00174886-1 - EPDC fb: Don't register EPDC unless...
2013-05-24 Ranjani VaidyanathanENGR00174569: MX6 - Disable WAIT mode by default
2013-05-24 Peter ChenENGR00174734-1 usb: need to discharge both dp and dm
2013-05-24 B38613ENGR00174615:Enable AH-1613 GPS module
2013-05-24 Adrian AlonsoENGR00171079-10: mx6q-arm2 cs42888 board sample rate...
2013-05-24 Adrian AlonsoENGR00171079-9: mx53-ard cs42888 board sample rate...
2013-05-24 Adrian AlonsoENGR00171079-8 imx6q sabreauto cs42888 audio support
2013-05-24 Adrian AlonsoENGR00171079-7 mx6q clock anaclk input source clock
2013-05-24 Adrian AlonsoENGR00171079-5 imx6q-sabreauto set supportted sample...
2013-05-24 Adrian AlonsoENGR00171079-2 mx6 add anaclk_2 io buffers enable macros
next