]> git.karo-electronics.de Git - karo-tx-uboot.git/history - arch
dm: pci: Correct primary/secondary/subordinate bus number assignment
[karo-tx-uboot.git] / arch /
2015-07-28 Bin Mengx86: pci: Do not assign irq 0 to pci device
2015-07-28 Bin Mengx86: pci: Assign pci irqs to all functions
2015-07-28 Bin Mengx86: Enable DM RTC support for all x86 boards
2015-07-28 Bin Mengx86: Change pci option rom area MTRR setting to cacheable
2015-07-28 Bin Mengx86: Simplify architecture defined exception handling...
2015-07-28 Bin Mengx86: Display correct CS/EIP/EFLAGS when there is an...
2015-07-28 Tom RiniMerge branch 'zynq' of git://www.denx.de/git/u-boot...
2015-07-28 Michal SimekARM: zynqmp: Wire up SATA for the board
2015-07-28 Michal SimekARM: zynqmp: Wire up ethernet controllers
2015-07-28 Michal SimekARM: zynq: Add support for zc770-xm011
2015-07-28 Michal SimekARM: zynq: DT: Update zc770 dtses
2015-07-28 Michal SimekARM: zynq: DT: Add zc702 pushbuttons to DT as gpio...
2015-07-28 Michal SimekARM: zynq: DT: Add missing interrupt for L2 pl310
2015-07-28 Michal SimekARM: zynq: DT: Get rid of ps-clk-frequency
2015-07-28 Michal SimekARM: zynq: DT: Update years in copyright
2015-07-28 Michal SimekARM: zynq: DT: Sync zc702/zc706/zed/zybo DT with kernel
2015-07-28 Michal SimekARM: zynq: DT: Add reference to bus node
2015-07-28 Michal SimekARM: zynq: DT: Add pinctrl node
2015-07-28 Michal SimekARM: zynq: DT: Cleanup address-cells and size-cells
2015-07-28 Michal SimekARM: zynq: DT: Clean up timer device tree nodes
2015-07-28 Michal SimekARM: zynq: DT: Use the zynq binding with macb
2015-07-28 Michal SimekARM: zynq: DT: Fix GEM register area size
2015-07-28 Michal Simekspi: Fix zynq SPI binding
2015-07-28 Michal SimekARM: zynq: DT: Remove 222 MHz OPP
2015-07-28 Michal SimekARM: zynq: DT: Migrate UART to Cadence binding
2015-07-28 Michal SimekARM: zynq: DT: Add a fixed regulator for CPU voltage
2015-07-28 Michal SimekARM: zynq: DT: Add missing nodes to DTSI
2015-07-28 Michal SimekARM: zynq: DT: Use the right names for nodes
2015-07-28 Michal Simekzynqmp: Add support for IP detection via SLCR
2015-07-28 Michal Simekzynqmp: mp: Simplify set_r5_start handling
2015-07-28 Siva Durga Prasad... zynqmp: Define ep config for ZynqMP
2015-07-28 Siva Durga Prasad... zynqmp: Kconfig: Move zynqmp Kconfig
2015-07-27 Antonio Borneostm32f4: add cpu clock option for 180 MHz
2015-07-27 Antonio Borneostm32f429: pass the device unique ID in DTB
2015-07-27 Masahiro YamadaKill unneeded #include <linux/kconfig.h>
2015-07-27 Paul Kocialkowskiam33xx: Unused get_board_rev function removal
2015-07-27 Paul Kocialkowskiomap3: CONFIG_REVISION_TAG ifdef check for get_board_rev
2015-07-27 Paul Kocialkowskiomap5: Definitions for SYS_BOOT-based fallback boot...
2015-07-27 Paul Kocialkowskiomap4: Definitions for SYS_BOOT-based fallback boot...
2015-07-27 Paul Kocialkowskiomap3: Definitions for SYS_BOOT-based fallback boot...
2015-07-27 Paul Kocialkowskiomap-common: SYS_BOOT-based fallback boot device select...
2015-07-27 Paul Kocialkowskiomap-common: Boot device define instead of hardcoded...
2015-07-27 Paul Kocialkowskiomap: SPL boot devices cleanup and completion
2015-07-27 Paul Kocialkowskiomap-common: Common boot code OMAP3 support and cleanup
2015-07-27 Masahiro Yamadakbuild: create symbolic link only for ARM, AVR32, SPARC...
2015-07-27 Vitaly Andrianovkeystone2: add wfi in to the core_spin loop
2015-07-25 Tom RiniMerge branch 'master' of http://git.denx.de/u-boot...
2015-07-25 Hans de Goedesunxi: ga10h: Enable both otg and regular usb host...
2015-07-25 Hans de Goedesunxi: musb: Stop treating not having a vbus-det gpio...
2015-07-25 Hans de Goedesunxi: musb: Use device-model for musb host mode
2015-07-25 Hans de Goedesunxi: musb: Move musb config and platdata to the sunxi...
2015-07-25 Hans de Goedesunxi: usb-phy: Add support for reading otg id pin...
2015-07-25 Hans de Goedesunxi: Enable CMD_USB and USB_STORAGE by default on...
2015-07-25 Tom Rinisunxi: Update selects in arch/arm/Kconfig for DM conver...
2015-07-25 Hans de Goedesunxi: Remove bogus uart entry from utoo-p66 dts file
2015-07-24 Tom RiniMerge git://git.denx.de/u-boot-usb
2015-07-24 Daniel Kochmańskisunxi: spl: Detect at runtime where SPL was read from
2015-07-24 Daniel Kochmańskisunxi: Create helper function veryfing valid boot signa...
2015-07-24 Stefan Roesearm: mvebu: Add SPL SDIO/MMC boot support
2015-07-23 Tom RiniMerge git://git.denx.de/u-boot-uniphier
2015-07-23 Masahiro YamadaARM: dts: UniPhier: add I2C ch4 device node for PH1...
2015-07-23 Masahiro YamadaARM: UniPhier: add PH1-sLD3 SoC support
2015-07-23 Masahiro YamadaARM: dts: UniPhier: add device-specific compatible...
2015-07-23 Tom RiniMerge git://git.denx.de/u-boot-marvell
2015-07-23 Stefan Roesearm: mvebu: a38x: Use correct PEX register access macros
2015-07-23 Stefan Roesearm: mvebu: drivers/ddr: Move Armada XP DDR init code...
2015-07-23 Stefan Roesearm: mvebu: Add Armada 38x SERDES / PHY init code from...
2015-07-23 Stefan Roesearm: mvebu: serdes: Move Armada XP SERDES / PHY init...
2015-07-23 Stefan Roesearm: mvebu: Disable MMU before changing register base...
2015-07-23 Stefan Roesearm: mvebu: spl.c: Add call to board_early_init_f()
2015-07-23 Stefan Roesearm: mvebu: Use default reg base address for SPL on...
2015-07-23 Stefan Roesearm: mvebu: Call timer_init early before PHY and DDR...
2015-07-23 Anton Schubertarm: mvebu: add Armada XP SATA support
2015-07-22 Masahiro Yamadax86: delete unneeded declarations of disable_irq()...
2015-07-22 Jiandong Zhengusb: gadget: bcm_udc_otg files
2015-07-22 Paul Kocialkowskiusb: Fastboot function config for better consistency...
2015-07-22 Nikhil Badolainclude: usb: Move USB controller base address mapping
2015-07-22 Ramneek Mehresharch: arm: fsl: Add XHCI support for LS1021A
2015-07-21 Simon Glassdm: test: Add a size to each reg property
2015-07-21 Simon Glassdm: test: Add a test for the system controller uclass
2015-07-21 Simon Glassdm: test: Add a test for the LED uclass
2015-07-21 Simon Glassdm: test: Add a test for the mmc uclass
2015-07-21 Simon Glassdm: test: Add a test for the ram uclass
2015-07-21 Simon Glasssandbox: Use the reset driver to handle reset
2015-07-21 Simon Glasssandbox: Support multiple reset types
2015-07-21 Simon Glassdm: test: Add tests for the clk uclass
2015-07-21 Simon Glasszynq: Rename struct clk_ops to zynq_clk_ops
2015-07-21 Simon Glassdm: arm: Put driver model I2C drivers before legacy...
2015-07-21 Simon Glassdm: Reduce SPL device tree size
2015-07-20 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-fsl...
2015-07-20 Zhichun Huaarmv8/fsl-lsch3: Fix TCR_EL3 for the final MMU setup.
2015-07-20 Zhichun Huaarmv8: Fix TCR macros for shareability attribute
2015-07-20 Haikun Wangarmv8/ls2085aqds: DSPI pin muxing configure through...
2015-07-20 Haikun Wangarmv8/ls2085a: Enable DSPI get input clk form 'mxc_get_...
2015-07-20 Haikun Wangarm/dts/ls2085a: Add dts files for LS2085AQDS and LS208...
2015-07-20 Haikun Wangarm/dts/ls2085a: Add DSPI dts node
2015-07-20 Haikun Wangarm/dts/ls2085a: Bring in ls2085a dts files from linux...
2015-07-20 Alison Wangarm/ls102xa: Add little-endian mode support for audio IPs
2015-07-20 Wang Dongshengarm/ls102xa: Add PSCI support for ls102xa
2015-07-20 Wang DongshengARMv7: Factor out reusable timer_wait from sunxi/psci_s...
next