]> git.karo-electronics.de Git - karo-tx-linux.git/history - drivers
ENGR00157253-2 MX6Q spi: update spi driver for MX6Q
[karo-tx-linux.git] / drivers /
2013-05-24 Robin GongENGR00157253-2 MX6Q spi: update spi driver for MX6Q
2013-05-24 Mahesh MahadevanENGR00160701 Fix the Micrel PHY driver
2013-05-24 Nancy ChenENGR00160797-2 Add Anatop regulator driver
2013-05-24 Alan TullENGR00160860-2 hdmi audio driver
2013-05-24 Tony LinENGR00160940-2 [MX6Q]sdhci: add delay line configuration
2013-05-24 Huang ShijieENGR00160936 GPMI : disable the DDR code
2013-05-24 Sammy HeENGR00160802-2 vpu: Check interrupt reason before disab...
2013-05-24 Alan TullENGR00160855 balance spinlock and irq enable in mxc...
2013-05-24 Huang ShijieENGR00160834 UTP : replace kzalloc() with vmalloc()
2013-05-24 Robin GongENGR00159530-4 mc34708:add new mc34708's rtc driver
2013-05-24 Robin GongENGR00159530-3 mc34708:add new regulator driver
2013-05-24 Robin GongENGR00159530-1 mc34708: add new pmic core driver based...
2013-05-24 Gary ZhangENGR00160512 SDMA: close clock when not used
2013-05-24 Danny NoldENGR00160692 - MXC HDMI: Unbalanced clk disable
2013-05-24 Mahesh MahadevanENGR00160709-2 Move board specific code out of FEC...
2013-05-24 YuxiENGR00160626 fix system hang when ipu clk get rate
2013-05-24 YuxiENGR00160112-4 camera: Add sensor clock setting for MX6
2013-05-24 Danny NoldENGR00160061 - MXC HDMI: Optimize HDMI clock management
2013-05-24 Tony LinENGR00160241 [mx6q]sdhci: kernel panic caused by clock...
2013-05-24 Huang ShijieENGR00139279 MX6Q: support the MFGTOOL
2013-05-24 Anson HuangENGR00159796 [MX6]Cooling of cpufreq should consider...
2013-05-24 Yuxi SunENGR00159738 v4l2: correct wrong parameter when V4l2...
2013-05-24 Anson HuangENGR00159512 [Mx6]Fix thermal driver build warning
2013-05-24 Anson HuangENGR00159007 [MX6]Add cpufreq cooling device
2013-05-24 Jason ChenENGR00158456-2 ipuv3 dev: return error for split mode...
2013-05-24 Yuxi SunENGR00158152 v4l2 capture: changes based on ipu changes
2013-05-24 Danny NoldENGR00156420 - EPDC/PxP: Add support for color map
2013-05-24 Danny NoldENGR00157457 - MXC HDMI: Add support for non-CEA spec...
2013-05-24 Sammy HeENGR00157155-2 vpu: Get resource by platform_get_resour...
2013-05-24 Jason ChenENGR00156996 ipuv3: fix pixel clock look up table
2013-05-24 Richard ZhaoENGR00156850 gpu-viv: add gpu-viv driver source
2013-05-24 Jason ChenENGR00156319-2 mxc edid: use vmode as aspect rate flag
2013-05-24 Jason ChenENGR00156673-3 ipuv3: move mach related definition...
2013-05-24 Jason ChenENGR00156374 ipuv3: check channel busy while wait disab...
2013-05-24 Danny NoldENGR00156300 - EPDC fb: Move ISR code to work Q & repla...
2013-05-24 Jason ChenENGR00156234 ipuv3: fix cpmem issue
2013-05-24 Jason ChenENGR00155146 ipuv3: use mutex instead of spin lock
2013-05-24 Jason ChenENGR00155140 ipuv3: add support of power suspend/resume
2013-05-24 Jason ChenENGR00155135-3 ipuv3 dev: add processing driver support
2013-05-24 Anish TrivediENGR00155880 USB device: Fix RNDIS Full Speed hang...
2013-05-24 Anson HuangENGR00155995 [MX6]Adjust default thermal point
2013-05-24 Danny NoldENGR00154436-2 - MXC HDMI: Support complete feature set
2013-05-24 Alan TullENGR00155845-1 mfd for hdmi
2013-05-24 Peter ChenENGR00155761 usb-host: fix the buiild warning with...
2013-05-24 Peter ChenENGR00155764 usb-host: fix the system hang when access...
2013-05-24 Tony LinENGR00155612-4 [mx6q]change the delay after clock frequ...
2013-05-24 Tony LinENGR00155612-3 [mx6q]add delay after cmd6 for eMMC...
2013-05-24 Tony LinENGR00155612-2 [mx6q]dynamically sd pad setting change
2013-05-24 Ming Leiusb: ehci: make HC see up-to-date qh/qtd descriptor...
2013-05-24 Anson HuangENGR00155627 [MX6]Add thermal cooling device
2013-05-24 Anson HuangENGR00155627-1 [MX6]Add thermal cooling devie
2013-05-24 Tony LinENGR00155611 [mx6q]correct eMMC DDR mode clock setting
2013-05-24 Peter ChenENGR00155396 usb-host: fix below build warning
2013-05-24 Jason ChenENGR00154080 ipuv3: fix clear buffer function
2013-05-24 Jason ChenENGR00155145 ipuv3 disp pos: restore pos setting after...
2013-05-24 Jason ChenENGR00153474 ipuv3 split mode: vf and enc task display...
2013-05-24 Jason ChenENGR00155141 ipuv3 split mode: adjust split calculate...
2013-05-24 Tony LinENGR00155400 [ath6kl]build warning
2013-05-24 Tony LinENGR00153895 [MX6Q]SD: SD3 clock is not off, when no...
2013-05-24 Anson HuangENGR00155391-2 [MX6]Clean up build warning
2013-05-24 Tony LinENGR00155288 [mx6q]sd dat1 glitch causes system panic
2013-05-24 Tony LinENGR00139260-2 [ath6k wifi]add some delay after resuming
2013-05-24 Tony LinENGR00139260-1 [ath6k wifi]remove drivers under drivers...
2013-05-24 Terry LvENGR00155179-2: Change imx_viim to mxs_viim.
2013-05-24 Jason ChenENGR00154981 ipuv3: fix clock issue
2013-05-24 Terry LvENGR00154889-2: Add virtual iim driver
2013-05-24 Tony LinENGR00139261 [MX6Q]support 8 bit MMC and eMMC DDR mode
2013-05-24 Peter ChenENGR00154704 usb-gadget: wmb is needed after dtd pointe...
2013-05-24 Peter ChenENGR00154703 usb-gadget: fix spin_lock recursion proble...
2013-05-24 Peter ChenENGR00154382 usb-udc: Set fsl arc usb driver as default...
2013-05-24 Jason ChenENGR00154437 mxc edid: add cea extend revision 1 and...
2013-05-24 Zeng ZhaomingENGR00154525 SDMA: SDMA not works when event number...
2013-05-24 Huang ShijieENGR00139247-6 DMA : add DMA support for imx6q
2013-05-24 Huang ShijieENGR00139247-3 MTD : add GPMI driver for IMX6Q
2013-05-24 Danny NoldENGR00154431 - MXCFB_SET_WAVEFORMS ioctl broken
2013-05-24 Richard ZhaoENGR00154429 rtc-snvs: request_irq too early
2013-05-24 Jason ChenENGR00154108-3 mxc ldb: make ldb support two ipu in...
2013-05-24 Zeng ZhaomingENGR00154346 UART: fix uart deadlock
2013-05-24 Jason ChenENGR00154135 sii902x hdmi: should not init twice
2013-05-24 Anish TrivediENGR00154209 SNVS RTC: Update comments for errata number
2013-05-24 Tony LinENGR00154217 [MX6Q/D]fix mmc suspend/resume issue.
2013-05-24 Jason ChenENGR00154132 ipuv3 fb: add fb unblank event after set var
2013-05-24 Sammy HeENGR00153830-2 vpu: Add VPU_IOC_REQ_VSHARE_MEM ioctl...
2013-05-24 Jason ChenENGR00153785 ipuv3: use ipu internal divider for extern...
2013-05-24 Dong AishengENGR00153740-4 imx-sdma: use mcu_2_shp script for ASRC
2013-05-24 Dong AishengENGR00153740-1 asrc: update to use new SDMA API
2013-05-24 Jason ChenENGR00153761 imx6q ipuv3: improve display quality
2013-05-24 Jason ChenENGR00153757 mxc_hdmi: fix build error of mxc_hdmi.c
2013-05-24 Danny NoldENGR00153670-4 - MXC HDMI: Add support for basic HDMI...
2013-05-24 Sammy HeENGR00153680 vpu: Fix the issue of not increasing open_...
2013-05-24 Jason ChenENGR00153578 tve-vga: set vga output gain to improve...
2013-05-24 Richard ZhuENGR00153275-1 ahci L2638 add the standalone ahci tempe...
2013-05-24 Frank LiENGR00139238-2 Touch: add p1003 and egalax
2013-05-24 Frank LiENGR00153373-1 OCOTP: Add missed header file
2013-05-24 Anson HuangENGR00139274-4 [UART]Enable suspend/resume feature
2013-05-24 Anson HuangENGR00139274-2 [MX6]Enable suspend/resume
2013-05-24 Zeng ZhaomingENGR00152287-3 SDMA: Fix sdma cache bufferable issue
2013-05-24 Zeng ZhaomingENGR00152287-2 SDMA: Add SDMA support for MX6Q
2013-05-24 Anish TrivediENGR00153208-2 Add SNVS RTC driver
2013-05-24 Jason ChenENGR00153217-2 mxc_dispdrv: add sii902x hdmi driver...
next