Antti Palosaari [Sun, 11 Aug 2013 22:07:02 +0000 (19:07 -0300)]
[media] msi3101: change stream format 384
After feeding different signal levels using RF generator and looking
GNU Radio FFT sink I made decision to change bit shift 3 to bit shift
2 as there was very (too) huge visible leap in FFT sink GUI. Now it
looks more natural.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Wed, 7 Aug 2013 16:20:29 +0000 (13:20 -0300)]
[media] msi3101: changes for tuner PLL freq limits
I made some tuner freq limit tests against RF signal generator.
Adjust some PLL limits according to these test results.
Here are the results, taken from two different devices.
Ranges are measured RF limits + calculated VCO limits.
Mirics MSi3101 SDR Dongle:
VHF_MODE 52 - 132 1664 - 4224
B3_MODE 103 - 263 1648 - 4208
B45_MODE 413 - 960 1652 - 3840
Hauppauge WinTV 133559 LF:
VHF_MODE 49 - 130 1568 - 4160
B3_MODE 98 - 259 1568 - 4144
B45_MODE 391 - 960 1564 - 3840
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Tue, 6 Aug 2013 00:33:31 +0000 (21:33 -0300)]
[media] msi3101: init bits 23:20 on PLL register
It is not sure what is meaning of that number, but it is better
to try do as Windows driver. It seems to have small effect for
signal when looking FM FFT.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Allow stepless synthesizer configuration. With that change we lose
precision a little bit, as it is now between +-500Hz from the target.
It could be better but on that case calculation algorithm goes more
complex and atm there is more important things to do.
Two approach to improve which comes to my mind are:
1) select and use biggest suitable step
2) use greatest common divisor algo to find divisor for thresh & frac
when possible to avoid rounding errors, which is root of cause of
current +-500Hz inaccuracy.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Thu, 11 Jul 2013 15:19:32 +0000 (12:19 -0300)]
[media] msi3101: fix stream re-start halt
Restarting stream fails quite often. Small delay is between urb killing
and stream stop command - likely to give harware some time to process
killed urbs.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Thu, 11 Jul 2013 00:59:58 +0000 (21:59 -0300)]
[media] msi3101: enhance sampling results
It looks like there is some extra data carried to enhance sampling
results. When you tune to some some weak/empty channel those bits
are always zeroes. When you tune to some channel where is very
strong signals those bits are all zeroes.
Examining those 32-bits reveals shortly there is 16 pieces of 2-bit
numbers. Number seen are 0, 1 and 3 - for some reason 2 is not used.
I used that number to shift bits given amount to left, "increasing"
sampling resolution by 3-bits. It may be wrong, but after some testing
it still provides better signal.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Tue, 9 Jul 2013 19:19:15 +0000 (16:19 -0300)]
[media] msi3101: add sampling mode control
Whilst Quadrature Sampling is most common sampling technique used in
radio technology there is others too. Add control user could select
sampling mode. We currently support only quadrature sampling.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Tue, 9 Jul 2013 05:44:56 +0000 (02:44 -0300)]
[media] msi3101: fix sampling rate calculation
These calculations seem to give 100% correct results. Calculation
formulas could be still a little bit wrong as I have no knowledge
what kind of dividers, multipliers and VCO limits there really is.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Fri, 5 Jul 2013 03:24:08 +0000 (00:24 -0300)]
[media] Mirics MSi3101 SDR Dongle driver
It is first Kernel software defined radio receiver driver.
That device is sold as a digital television solution.
MSi3101 is reference design which consists of two chips:
1) MSi2500 USB ADC
2) MSi001 RF-tuner
Driver is put to staging as API is not ready.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c: In function 'sh_mobile_ceu_clock_start':
drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c:613:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
Prathyush K [Wed, 7 Aug 2013 11:53:04 +0000 (08:53 -0300)]
[media] exynos-gsc: fix s2r functionality
When gsc is in runtime suspended state, there is no need to call
m2m_suspend during suspend and similarly, there is no need to call
m2m_resume during resume if already in runtime suspended state. This
patch adds the necessary conditions to achieve this.
Andrzej Hajda [Wed, 24 Jul 2013 13:57:32 +0000 (10:57 -0300)]
[media] V4L: s5c73m3: Add format propagation for TRY formats
Resolution set on ISP pad of S5C73M3-OIF subdev should be
propagated to source pad for TRY and ACTIVE formats.
The patch adds missing propagation for TRY format.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] V4L2: mt9t031: don't Oops if asynchronous probing is attempted
The mt9t031 driver hasn't yet been updated to support asynchronous
subdevice probing. If such a probing is attempted, the driver is allowed
to fail, but it shouldn't Oops. This patch fixes such a potential NULL
pointer dereference.
[media] V4L2: mx3_camera: add support for asynchronous subdevice registration
The soc-camera core does all the work on supporting asynchronous
subdevice probing, host drivers only have to pass a subdevice list to
soc-camera. Typically this list is provided by the platform.
[media] V4L2: soc-camera: fix requesting regulators in synchronous case
With synchronous subdevice probing regulators should be requested by the
soc-camera core in soc_camera_pdrv_probe(). Subdevice drivers, supporting
asynchronous probing, call soc_camera_power_init() to request regulators.
Erroneously, the same regulator array is used in the latter case as in
the former, which leads to a failure. This patch fixes it by preventing
the second regulator request from being executed.
Hans Verkuil [Thu, 25 Jul 2013 12:40:34 +0000 (09:40 -0300)]
[media] soc_camera: fix compiler warning
media_build/v4l/soc_camera.c: In function 'soc_camera_host_register':
media_build/v4l/soc_camera.c:1513:10: warning: 'sasd' may be used uninitialized in this function [-Wmaybe-uninitialized]
snprintf(clk_name, sizeof(clk_name), "%d-%04x",
^
media_build/v4l/soc_camera.c:1464:34: note: 'sasd' was declared here
struct soc_camera_async_subdev *sasd;
^
By changing the type of 'i' to unsigned and changing a condition we finally
convince the compiler that sasd is really initialized.
Add Renesas R-Car VIN (Video In) V4L2 driver.
Based on the patch by Phil Edworthy <phil.edworthy@renesas.com>.
[Sergei: removed deprecated IRQF_DISABLED flag, reordered/renamed 'enum chip_id'
values, reordered rcar_vin_id_table[] entries, removed senseless parens from
to_buf_list() macro, used ALIGN() macro in rcar_vin_setup(), added {} to the
*if* statement and used 'bool' values instead of 0/1 where necessary, removed
unused macros, done some reformatting and clarified some comments.]
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] v4l: async: Make it safe to unregister unregistered notifier
Calling v4l2_async_notifier_unregister() on a notifier that hasn't been
registered leads to a crash. To simplify drivers, make it safe to
unregister a notifier that has not been registered.
[media] v4l: of: Drop acquired reference to node when getting next endpoint
The of_get_child_by_name() function takes a reference to the node it
returns. Make sure to drop it when looking for the ports node in
v4l2_of_get_next_endpoint().
[media] videobuf2-core: Verify planes lengths for output buffers
For output buffers application provide to the kernel the number of bytes
they stored in each plane of the buffer. Verify that the value is
smaller than or equal to the plane length.
This patch implements i2c_board_info.platform_data, and some options to
override the default initialization table for the GM7113C and SAA7113
chips.
Signed-off-by: Jon Arne Jørgensen <jonarne@jonarne.no> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] saa7115: Do not load saa7115_init_misc for gm7113c
Most of the registers changed in saa7115_init_misc table are out of range
for the gm7113c chip.
The only register that's within range, don't need to be changed here.
Signed-off-by: Jon Arne Jørgensen <jonarne@jonarne.no> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] saa7115: Fix saa711x_set_v4lstd for gm7113c
saa711x_set_v4lstd would toggle several bits that should not be touched
when changing std. This patch fixes this.
Signed-off-by: Jon Arne Jørgensen <jonarne@jonarne.no> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Mon, 29 Jul 2013 11:41:00 +0000 (08:41 -0300)]
[media] v4l2: use new V4L2_DV_BT_BLANKING/FRAME defines
Use the new blanking and frame size defines. This also fixed a bug in
these drivers: they assumed that the height for interlaced formats was
the field height, however height is the frame height. So the height
for a field is actually bt->height / 2.
Hans Verkuil [Mon, 29 Jul 2013 11:40:56 +0000 (08:40 -0300)]
[media] v4l2: move dv-timings related code to v4l2-dv-timings.c
v4l2-common.c contained a bunch of dv-timings related functions.
Move that to the new v4l2-dv-timings.c which is a more appropriate
place for them.
There aren't many drivers that do HDTV, so it is a good idea to separate
common code related to that into a module of its own.
Antti Palosaari [Tue, 30 Jul 2013 20:22:25 +0000 (17:22 -0300)]
[media] dvb_usb_v2: get rid of deferred probe
Deferred probe was added in order to avoid udev vs. Kernel firmware
download problems. It is not needed anymore.
https://bugzilla.redhat.com/show_bug.cgi?id=827538
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Tue, 30 Jul 2013 19:33:16 +0000 (16:33 -0300)]
[media] lme2510: do not use bInterfaceNumber from dvb_usb_v2
No need to access bInterfaceNumber via dvb_usb_v2 internals as driver
has it already.
That patch is prepare for dvb_usb_v2 deferred probe hack removal. It was
added due to udev firmware loading problems, but things are fixed after
that and it is not needed anymore.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Antti Palosaari [Wed, 24 Jul 2013 05:04:12 +0000 (02:04 -0300)]
[media] e4000: implement DC offset correction
I did some tests against modulator (television signal generator) and this
seems to improve sensitivity a little bit on channel I used. Used device
was able to receive transmission just as weak signal as with Windows XP.
Thanks to Jacek for donating his non-working device. I cannot ask he to
test anymore...
Reported-by: Jacek Konieczny <jajcus@jajcus.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] vsp1: Use the maximum number of entities defined in platform data
The VSP1 driver allows to define the maximum number of each module
such as RPF, WPF, and UDS in a platform data definition.
This suppresses operations for nonexistent or unused modules.
[media] vsp1: Fix lack of the sink entity registration for enabled links
Each source entity maintains a pointer to the counterpart sink
entity while an enabled link connects them. It should be managed by
the setup_link callback in the media controller framework at runtime.
However, enabled links which connect RPFs and WPFs that have an
equivalent index number are created during initialization.
This registers the pointer to a sink entity from the source entity
when an enabled link is created.
The VSP1 is a video processing engine that includes a blender, scalers,
filters and statistics computation. Configurable data path routing logic
allows ordering the internal blocks in a flexible way.
Due to the configurable nature of the pipeline the driver implements the
media controller API and doesn't use the V4L2 mem-to-mem framework, even
though the device usually operates in memory to memory mode.
Only the read pixel formatters, up/down scalers, write pixel formatters
and LCDC interface are supported at this stage.
Laurent Pinchart [Wed, 26 Jun 2013 12:46:42 +0000 (09:46 -0300)]
[media] v4l: Add V4L2_PIX_FMT_NV16M and V4L2_PIX_FMT_NV61M formats
NV16M and NV61M are planar YCbCr 4:2:2 and YCrCb 4:2:2 formats with a
luma plane followed by an interleaved chroma plane. The planes are not
required to be contiguous in memory, and the formats can only be used
with the multi-planar formats API.
[media] v4l: Fix V4L2_MBUS_FMT_YUV10_1X30 media bus pixel code value
The V4L2_MBUS_FMT_YUV10_1X30 code is documented as being equal to
0x2014, while the v4l2-mediabus.h header defines it as 0x2016. Fix the
documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] media: vb2: Take queue or device lock in mmap-related vb2 ioctl handlers
The vb2_fop_mmap() and vb2_fop_get_unmapped_area() functions are plug-in
implementation of the mmap() and get_unmapped_area() file operations
that calls vb2_mmap() and vb2_get_unmapped_area() on the queue
associated with the video device. Neither the
vb2_fop_mmap/vb2_fop_get_unmapped_area nor the
v4l2_mmap/vb2_get_unmapped_area functions in the V4L2 core take any
lock, leading to race conditions between mmap/get_unmapped_area and
other buffer-related ioctls such as VIDIOC_REQBUFS.
Fix it by taking the queue or device lock around the vb2_mmap() and
vb2_get_unmapped_area() calls.
[media] media: Add support for circular graph traversal
The graph traversal API (media_entity_graph_walk_*) doesn't support
cyclic graphs and will fail to correctly walk a graph when circular
links exist. Support circular graph traversal by checking whether an
entity has already been visited before pushing it to the stack.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Firmware version v7 is mostly similar to v6 in terms
of hardware specific controls and commands. So the hardware
specific opr_v6 and cmd_v6 are re-used for v7 also. This patch
updates the v6 files to handle v7 version also.
The MFC v6 specific code holds good for MFC v7 also as
the v7 version is a superset of v6 and the HW interface
remains more or less similar. This patch renames the macro
IS_MFCV6() to IS_MFCV6_PLUS() so that it can be used
for v7 also.
[media] stk1160: Build as a module if SND is m and audio support is selected
As reported by Randy Dunlap:
When CONFIG_SND=m and CONFIG_SND_AC97_CODEC=m and
CONFIG_VIDEO_STK1160=y
CONFIG_VIDEO_STK1160_AC97=y
drivers/built-in.o: In function `stk1160_ac97_register':
(.text+0x122706): undefined reference to `snd_card_create'
drivers/built-in.o: In function `stk1160_ac97_register':
(.text+0x1227b2): undefined reference to `snd_ac97_bus'
drivers/built-in.o: In function `stk1160_ac97_register':
(.text+0x1227cd): undefined reference to `snd_card_free'
drivers/built-in.o: In function `stk1160_ac97_register':
(.text+0x12281b): undefined reference to `snd_ac97_mixer'
drivers/built-in.o: In function `stk1160_ac97_register':
(.text+0x122832): undefined reference to `snd_card_register'
drivers/built-in.o: In function `stk1160_ac97_unregister':
(.text+0x12285e): undefined reference to `snd_card_free'
Luis Alves [Wed, 24 Jul 2013 12:06:01 +0000 (09:06 -0300)]
[media] cx23885[v4]: Fix interrupt storm when enabling IR receiver
Apparently the Flatiron genereates an interrupt after the built-in self
test for each of its left and right channels has completed.
Apparently Conexant wire-OR'ed the Flatiron's interrupt output with the
interrupt output of the CX23885 A/V core.
Those interrupts need to be handled, otherwise, they generate an
interrrupt request storm.
So:
- Add flatiron readreg and writereg functions prototypes
on a new header file;
- Modify the av interrupt handler to cleanup flatiron IRQs if no other
interrupt handling happens.
Signed-off-by: Luis Alves <ljalvs@gmail.com> Acked-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] media: lirc: Allow lirc dev to talk to rc device
The use case is simple, if any rc device has allowed protocols =
RC_TYPE_LIRC and map_name = RC_MAP_LIRC set, the driver open will be never
called. The reason for this is, all of the key maps except lirc have some
KEYS in there map, so during rc_register_device process these keys are
matched against the input drivers and open is performed, so for the case
of RC_MAP_EMPTY, a vt/keyboard is matched and the driver open is
performed.
In case of lirc, there is no match and result is that there is no open
performed, however the lirc-dev will go ahead and create a /dev/lirc0
node. Now when lircd/mode2 opens this device, no data is available
because the driver was never opened.
Other case pointed by Sean Young, As rc device gets opened via the
input interface. If the input device is never opened (e.g. embedded with
no console) then the rc open is never called and lirc will not work
either. So that's another case.
lirc_dev seems to have no link with actual rc device w.r.t open/close.
This patch adds rc_dev pointer to lirc_driver structure for cases like
this, so that it can do the open/close of the real driver in accordance
to lircd/mode2 open/close.
Without this patch its impossible to open a rc device which has
RC_TYPE_LIRC ad RC_MAP_LIRC set.
[media] media: rc: Add rc_open/close and use count to rc_dev
This patch adds user count to rc_dev structure, the reason to add this
new member is to allow other code like lirc to open rc device directly.
In the existing code, rc device is only opened by input subsystem which
works ok if we have any input drivers to match. But in case like lirc
where there will be no input driver, rc device will be never opened.
Having this user count variable will be usefull to allow rc device to be
opened from code other than rc-main.
This patch also adds rc_open and rc_close functions for other drivers
like lirc to open and close rc devices. This functions safely increment
and decrement the user count. Other driver wanting to open rc device
should call rc_open and rc_close, rather than directly modifying the
rc_dev structure.
Philipp Zabel [Thu, 27 Jun 2013 09:59:01 +0000 (06:59 -0300)]
[media] coda: add CODA7541 decoding support
This patch enables decoding of h.264 and mpeg4 streams on CODA7541.
Queued output buffers are immediately copied into the bitstream
ringbuffer. A device_run can be scheduled whenever there is either
enough compressed bitstream data, or the CODA is in stream end mode.
Each successful device_run, data is read from the bitstream ringbuffer
and a frame is decoded into a free internal framebuffer. Depending on
reordering, a possibly previously decoded frame is marked as display
frame, and at the same time the display frame from the previous run
is copied out into a capture buffer by the rotator hardware.
The dequeued capture buffers are counted to send the EOS signal to
userspace with the last frame. When userspace sends the decoder stop
command or enqueues an empty output buffer, the stream end flag is
set to allow decoding the remaining frames in the bitstream
ringbuffer.
The enum_fmt/try_fmt functions return fixed capture buffer sizes
while the output queue is streaming, to allow better autonegotiation
in userspace.
A per-context buffer mutex is used to lock the picture run against
buffer dequeueing: if a job gets queued, then streamoff dequeues
the last buffer, and then device_run is called, bail out. For that
the interrupt handler has to be threaded.
Philipp Zabel [Fri, 21 Jun 2013 06:55:33 +0000 (03:55 -0300)]
[media] coda: split encoder specific parts out of device_run and irq_handler
Add coda_prepare_encode() and coda_finish_encode() functions. They are called
from coda_device_run() and coda_irq_handler(), respectively, before and after
the hardware picture run. This should make the following decoder support patch
easier to read, which will add the coda_prepare/finish_decode() equivalents.
Sean Young [Mon, 8 Jul 2013 20:33:09 +0000 (17:33 -0300)]
[media] lirc: make transmit interface consistent
All lirc drivers that can transmit, return EINVAL when they are passed
more than IR data than they can send. That is, except for two drivers
which I touched.
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Sean Young [Mon, 8 Jul 2013 20:33:11 +0000 (17:33 -0300)]
[media] lirc: validate transmission ir data
The lirc interface allows 255 u32 spaces and pulses, which are usec. If
the driver can handle this (e.g. winbond-cir) you can produce hours of
meaningless IR data and there is no method of interrupting it.
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Sean Young [Mon, 8 Jul 2013 20:33:08 +0000 (17:33 -0300)]
[media] redrat3: errors on unplug
In an usb disconnect handler, the urbs have already been cancelled so the
attempt to disable the IR receiver just results in errors:
[ 899.638862] redrat3 7-2:1.0: redrat3_send_cmd: Error sending rr3 cmd res -110, data 0
[ 899.638870] redrat3 7-2:1.0: redrat3_disable_detector: detector status: 251, should be 0
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] V4L: Merge struct v4l2_async_subdev_list with struct v4l2_subdev
By integrating the v4l2-async API internals a bit more with
the core overall the v4l2-async code becomes a bit simpler
and easier to follow. Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] V4L: Rename subdev field of struct v4l2_async_notifier
This is a purely cosmetic change. Since the 'subdev' member
points to an array of subdevs make it more explicit by
renaming to the plural form. Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] V4L: Add V4L2_ASYNC_MATCH_OF subdev matching type
Add support for matching by device_node pointer. This allows
the notifier user to simply pass a list of device_node pointers
corresponding to sub-devices.
[media] V4L: Rename v4l2_async_bus_* to v4l2_async_match_*
enum v4l2_async_bus_type also selects a method subdevs are matched
in the notification handlers, rename it to v4l2_async_match_type
so V4L2_ASYNC_MATCH_OF entry can be further added for matching by
device tree node pointer. Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
[media] V4L: Drop bus_type check in v4l2-async match functions
These match_* functions are internal callbacks and are always
invoked only after checking asd->bus_type. So drop redundant
checks in match_i2c() and match_platform() functions. Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This way to only way to get debug info is to use dynamic debug, but I
left debugging prints to debug hardware issues, and so I want this to be
enabled by module param.
[media] ene_ir: Fix interrupt line passthrough to hardware
While we can delay IRQ intialization, we need the interrupt number
right away because unusually hardware have programable interrupt number,
and thus we give it the number that was allocated by BIOS
Dan Carpenter [Wed, 26 Jun 2013 13:37:36 +0000 (10:37 -0300)]
[media] staging: lirc: clean error handling in probe()
We have reorganized the error handling into a simpler and more canonical
format.
Additionally we removed extra empty lines, switched to devm_kzalloc(), and
substitute 'minor' by 'ret' in the igorplugusb_remote_probe() function.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
projects / karo-tx-linux.git / log