Magnus Damm [Tue, 2 Feb 2010 04:01:25 +0000 (13:01 +0900)]
mtd: trivial sh_flctl changes
This patch contains a few changes for the sh_flctl driver:
- not sh7723-only driver - get rid of kconfig dependency
- use dev_err() instead of printk()
- use __devinit and __devexit for probe()/remove()
- fix probe() return values
Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Magnus Damm [Wed, 27 Jan 2010 07:41:19 +0000 (07:41 +0000)]
usb: r8a66597-hdc disable interrupts fix
This patch improves disable_controller() in the r8a66597-hdc
driver to disable all interrupts and clear status flags. It
also makes sure that disable_controller() is called during
probe(). This fixes the relatively rare case of unexpected
pending interrupts after kexec reboot.
Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Markus Pietrek [Tue, 2 Feb 2010 02:29:15 +0000 (11:29 +0900)]
spi: spi_sh_msiof: Fixed data sampling on the correct edge
The spi_sh_msiof.c driver presently misconfigures REDG and TEDG. TEDG==0
outputs data at the **rising edge** of the clock and REDG==0 samples data
at the **falling edge** of the clock. Therefore for SPI, TEDG must be
equal to REDG, otherwise the last byte received is not sampled in SPI
mode 3.
This brings the driver in line with the SH7723 HW Reference Manual
settings documented in Figures 20.20 and 20.21 ("SPI Clock and data
timing").
Signed-off-by: Markus Pietrek <Markus.Pietrek@emtrion.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Linus Torvalds [Mon, 1 Feb 2010 18:57:12 +0000 (10:57 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ASoC: AM3517: ASoC driver not getting compiled
ASoC: AIC23: Fixing writes to non-existing registers in resume function
ALSA: hda - Add an ASUS mobo to MSI blacklist
Linus Torvalds [Mon, 1 Feb 2010 18:46:49 +0000 (10:46 -0800)]
Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms: Fix oops after radeon_cs_parser_init() failure.
drm/radeon/kms: move radeon KMS on/off switch out of staging.
drm/radeon/kms: Bailout of blit if error happen & protect with mutex V3
drm/vmwgfx: Don't send bad flags to the host
drm/vmwgfx: Request SVGA version 2 and bail if not found
drm/vmwgfx: Correctly detect 3D
drm/ttm: remove unnecessary save_flags and ttm_flag_masked in ttm_bo_util.c
drm/kms: Remove incorrect comment in struct drm_mode_modeinfo
drm/ttm: remove padding from ttm_ref_object on 64bit builds
drm/radeon/kms: release agp on error.
drm/kms/radeon/agp: Move the check of the aper_size after drm_acp_acquire and drm_agp_info
drm/kms/radeon/agp: Fix warning, format ‘%d’ expects type ‘int’, but argument 4 has type ‘size_t’
drm/ttm: Avoid conflicting reserve_memtype during ttm_tt_set_page_caching.
drm/kms/radeon: pick digitial encoders smarter. (v3)
drm/radeon/kms: use active device to pick connector for encoder
drm/radeon/kms: fix incorrect logic in DP vs eDP connector checking.
Linus Torvalds [Mon, 1 Feb 2010 18:45:00 +0000 (10:45 -0800)]
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf, hw_breakpoint, kgdb: Do not take mutex for kernel debugger
x86, hw_breakpoints, kgdb: Fix kgdb to use hw_breakpoint API
hw_breakpoints: Release the bp slot if arch_validate_hwbkpt_settings() fails.
perf: Ignore perf.data.old
perf report: Fix segmentation fault when running with '-g none'
Linus Torvalds [Mon, 1 Feb 2010 18:44:36 +0000 (10:44 -0800)]
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Correct printk whitespace in warning from cpu down task check
sched: Fix incorrect sanity check
sched: Fix fork vs hotplug vs cpuset namespaces
Linus Torvalds [Mon, 1 Feb 2010 18:43:01 +0000 (10:43 -0800)]
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing/documentation: Cover new frame pointer semantics
tracing/documentation: Fix a typo in ftrace.txt
ring-buffer: Check for end of page in iterator
ring-buffer: Check if ring buffer iterator has stale data
tracing: Prevent kernel oops with corrupted buffer
Linus Torvalds [Mon, 1 Feb 2010 18:42:35 +0000 (10:42 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/agp: Fix agp_amd64_init regression
x86: Add quirk for Intel DG45FC board to avoid low memory corruption
x86: Add Dell OptiPlex 760 reboot quirk
x86, UV: Fix RTC latency bug by reading replicated cachelines
oprofile/x86: add Xeon 7500 series support
oprofile/x86: fix crash when profiling more than 28 events
lib/dma-debug.c: mark file-local struct symbol static.
x86/amd-iommu: Fix deassignment of a device from the pt_domain
x86/amd-iommu: Fix IOMMU-API initialization for iommu=pt
x86/amd-iommu: Fix NULL pointer dereference in __detach_device()
x86/amd-iommu: Fix possible integer overflow
Mark Brown [Mon, 4 Jan 2010 15:30:54 +0000 (15:30 +0000)]
regulator: Specify REGULATOR_CHANGE_STATUS for WM835x LED constraints
The WM8350 LED driver needs to be able to enable and disable the
regulators it is using. Previously the core wasn't properly enforcing
status change constraints so the driver was able to function but this
has always been intended to be required.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Paul Mundt [Mon, 1 Feb 2010 11:01:50 +0000 (20:01 +0900)]
sh: Improved multi-resource handling for SH7780 PCI.
The SH7780 PCI controller supports 3 different ranges of PCI memory in
addition to its PCI I/O window. In the case of 29-bit mode, only 2 memory
windows are supported, while in 32-bit mode all 3 are visible. This
attempts to make the resource handling completely dynamic and to permit
platforms to map in as many apertures as they can handle.
Paul Mundt [Mon, 1 Feb 2010 07:39:46 +0000 (16:39 +0900)]
sh: Hook up ERR/PERR/SERR detection for SH7780 PCI host controllers.
These were never handled before, so implement some common infrastructure
to support them, then make use of that in the SH7780-specific code. In
practice there is little here that can not be generalized for SH4 parts,
which will be an incremental change as the 7780/7751 code is gradually
unified.
Paul Mundt [Mon, 1 Feb 2010 04:11:25 +0000 (13:11 +0900)]
sh: Handle PCI controller resource conflicts.
register_pci_controller() can fail, but presently is a void function.
Change this over to an int so that we can bail early before continuing on
with post-registration initialization (such as throwing the controller in
to 66MHz mode in the case of the SH7780 host controller).
Paul Mundt [Mon, 1 Feb 2010 04:01:42 +0000 (13:01 +0900)]
sh: Enable PCI66 support for SH7780 host controller.
This adds some helper glue for scanning the bus and determining if all
of the devices are 66MHz capable or not before flipping on 66MHz mode.
This isn't quite to spec, but it's fairly consistent with what other
embedded controllers end up having to do.
Scanning code cribbed from the MIPS txx9 PCI code.
Michel Dänzer [Fri, 22 Jan 2010 08:20:00 +0000 (09:20 +0100)]
drm/radeon/kms: Fix oops after radeon_cs_parser_init() failure.
If radeon_cs_parser_init() fails, radeon_cs_ioctl() calls
radeon_cs_parser_fini() with the non-zero error value. The latter dereferenced
parser->ib which hasn't been initialized yet -> boom. Add a test for parser->ib
being non-NULL before dereferencing it.
Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Paul Mundt [Mon, 1 Feb 2010 02:33:22 +0000 (11:33 +0900)]
sh: Fix up large system memory handling for SH7780 PCI.
For systems that have more than 512MB we need to set up an additional
mapping, this fixes up the rounding to the next power of two and splits
out the mapping accordingly between the two local bus mapping windows.
Dave Airlie [Mon, 1 Feb 2010 01:35:47 +0000 (11:35 +1000)]
drm/radeon/kms: move radeon KMS on/off switch out of staging.
We are happy enough that the KMS driver is stable enough for enough people
for the kms enable/disable to leave staging. Distros can now contemplate
turning this on.
Jerome Glisse [Fri, 22 Jan 2010 14:19:00 +0000 (15:19 +0100)]
drm/radeon/kms: Bailout of blit if error happen & protect with mutex V3
If an error happen in r600_blit_prepare_copy report it rather
than WARNING and keeping execution. For instance if ib allocation
failed we did just warn about but then latter tried to access
NULL ib ptr causing oops. This patch also protect r600_copy_blit
with a mutex as otherwise one process might overwrite blit temporary
data with new one possibly leading to GPU lockup.
Should partialy or totaly fix:
https://bugzilla.redhat.com/show_bug.cgi?id=553279
V2 failing blit initialization is not fatal, fallback to memcpy when
this happen
V3 init blit before startup as we pin in startup, remove duplicate
code (this one was actualy tested unlike V2)
Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Peter Hanzel [Sat, 30 Jan 2010 03:38:07 +0000 (03:38 +0000)]
drm/vmwgfx: Request SVGA version 2 and bail if not found
This fixes the driver not loading on older versions of VMware.
Signed-off-by: Peter Hanzel <hanzelpeter@gmail.com> Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Richard Kennedy [Tue, 26 Jan 2010 17:10:48 +0000 (17:10 +0000)]
drm/ttm: remove padding from ttm_ref_object on 64bit builds
Re-order structure ttm_ref_object to remove 8 bytes of alignment padding
on 64 bit builds, so shrinking its size from 72 to 64 bytes allowing it
to fit into a smaller slab.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Acked-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
John Kacur [Sun, 31 Jan 2010 19:38:03 +0000 (20:38 +0100)]
drm/kms/radeon/agp: Move the check of the aper_size after drm_acp_acquire and drm_agp_info
First call drm_agp_acquire to check if agp has been acquired.
Second call drm_agp_info to fill in the info data struct, including aper_size.
Finally do the check to see if the aper_size makes sense.
Signed-off-by: John Kacur <jkacur@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
booting a Lenovo W500 with LVDS + DP outputs showed up a TODO we had
on our list, to pick a correct digital encoder block. The LVTMA
encoder requires the second digital encoder, all others can use any
encoder at all.
This fixes the digital encoder selection logic to enable LVDS/DP combos
to work okay.
V2: fix silly addition of connector dig_block and cleanup the other
places in the code that pick the encoder.
V3: rename to dig_encoder and clean up further - also fix
the picking algorithm.
Jason Wessel [Thu, 28 Jan 2010 23:04:43 +0000 (17:04 -0600)]
perf, hw_breakpoint, kgdb: Do not take mutex for kernel debugger
This patch fixes the regression in functionality where the
kernel debugger and the perf API do not nicely share hw
breakpoint reservations.
The kernel debugger cannot use any mutex_lock() calls because it
can start the kernel running from an invalid context.
A mutex free version of the reservation API needed to get
created for the kernel debugger to safely update hw breakpoint
reservations.
The possibility for a breakpoint reservation to be concurrently
processed at the time that kgdb interrupts the system is
improbable. Should this corner case occur the end user is
warned, and the kernel debugger will prohibit updating the
hardware breakpoint reservations.
Any time the kernel debugger reserves a hardware breakpoint it
will be a system wide reservation.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: kgdb-bugreport@lists.sourceforge.net Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: torvalds@linux-foundation.org
LKML-Reference: <1264719883-7285-3-git-send-email-jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jason Wessel [Thu, 28 Jan 2010 23:04:42 +0000 (17:04 -0600)]
x86, hw_breakpoints, kgdb: Fix kgdb to use hw_breakpoint API
In the 2.6.33 kernel, the hw_breakpoint API is now used for the
performance event counters. The hw_breakpoint_handler() now
consumes the hw breakpoints that were previously set by kgdb
arch specific code. In order for kgdb to work in conjunction
with this core API change, kgdb must use some of the low level
functions of the hw_breakpoint API to install, uninstall, and
deal with hw breakpoint reservations.
The kgdb core required a change to call kgdb_disable_hw_debug
anytime a slave cpu enters kgdb_wait() in order to keep all the
hw breakpoints in sync as well as to prevent hitting a hw
breakpoint while kgdb is active.
During the architecture specific initialization of kgdb, it will
pre-allocate 4 disabled (struct perf event **) structures. Kgdb
will use these to manage the capabilities for the 4 hw
breakpoint registers, per cpu. Right now the hw_breakpoint API
does not have a way to ask how many breakpoints are available,
on each CPU so it is possible that the install of a breakpoint
might fail when kgdb restores the system to the run state. The
intent of this patch is to first get the basic functionality of
hw breakpoints working and leave it to the person debugging the
kernel to understand what hw breakpoints are in use and what
restrictions have been imposed as a result. Breakpoint
constraints will be dealt with in a future patch.
While atomic, the x86 specific kgdb code will call
arch_uninstall_hw_breakpoint() and arch_install_hw_breakpoint()
to manage the cpu specific hw breakpoints.
The net result of these changes allow kgdb to use the same pool
of hw_breakpoints that are used by the perf event API, but
neither knows about future reservations for the available hw
breakpoint slots.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: kgdb-bugreport@lists.sourceforge.net Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: torvalds@linux-foundation.org
LKML-Reference: <1264719883-7285-2-git-send-email-jason.wessel@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
David Härdeman [Thu, 28 Jan 2010 20:02:54 +0000 (21:02 +0100)]
x86: Add quirk for Intel DG45FC board to avoid low memory corruption
Commit 6aa542a694dc9ea4344a8a590d2628c33d1b9431 added a quirk for the
Intel DG45ID board due to low memory corruption. The Intel DG45FC
shares the same BIOS (and the same bug) as noted in:
http://bugzilla.kernel.org/show_bug.cgi?id=13736
Signed-off-by: David Härdeman <david@hardeman.nu>
LKML-Reference: <20100128200254.GA9134@hardeman.nu> Cc: <stable@kernel.org> Cc: Alexey Fisher <bug-track@fisher-privat.net> Cc: ykzhao <yakui.zhao@intel.com> Cc: Tony Bones <aabonesml@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Hugh Dickins [Fri, 29 Jan 2010 17:46:34 +0000 (17:46 +0000)]
mm: fix migratetype bug which slowed swapping
After memory pressure has forced it to dip into the reserves, 2.6.32's 5f8dcc21211a3d4e3a7a5ca366b469fb88117f61 "page-allocator: split per-cpu
list into one-list-per-migrate-type" has been returning MIGRATE_RESERVE
pages to the MIGRATE_MOVABLE free_list: in some sense depleting reserves.
Fix that in the most straightforward way (which, considering the overheads
of alternative approaches, is Mel's preference): the right migratetype is
already in page_private(page), but free_pcppages_bulk() wasn't using it.
How did this bug show up? As a 20% slowdown in my tmpfs loop kbuild
swapping tests, on PowerMac G5 with SLUB allocator. Bisecting to that
commit was easy, but explaining the magnitude of the slowdown not easy.
The same effect appears, but much less markedly, with SLAB, and even
less markedly on other machines (the PowerMac divides into fewer zones
than x86, I think that may be a factor). We guess that lumpy reclaim
of short-lived high-order pages is implicated in some way, and probably
this bug has been tickling a poor decision somewhere in page reclaim.
But instrumentation hasn't told me much, I've run out of time and
imagination to determine exactly what's going on, and shouldn't hold up
the fix any longer: it's valid, and might even fix other misbehaviours.
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: check total number of devices when removing missing
Btrfs: check return value of open_bdev_exclusive properly
Btrfs: do not mark the chunk as readonly if in degraded mode
Btrfs: run orphan cleanup on default fs root
Btrfs: fix a memory leak in btrfs_init_acl
Btrfs: Use correct values when updating inode i_size on fallocate
Btrfs: remove tree_search() in extent_map.c
Btrfs: Add mount -o compress-force
Paul Mundt [Fri, 29 Jan 2010 16:41:21 +0000 (01:41 +0900)]
sh: Kill off broken type 1 PCI config access checks.
The host controllers only support type 1, so there's not much else to
test for. Some of the older controllers also supported type 2 accesses,
but we've never supported those, and likely never will. Beyond that, the
P1SEG test is meaningless for 32-bit mode, so rather than refactoring it,
just kill the type 1 test off completely.
H. Peter Anvin [Fri, 29 Jan 2010 06:14:43 +0000 (22:14 -0800)]
x86: get rid of the insane TIF_ABI_PENDING bit
Now that the previous commit made it possible to do the personality
setting at the point of no return, we do just that for ELF binaries.
And suddenly all the reasons for that insane TIF_ABI_PENDING bit go
away, and we can just make SET_PERSONALITY() just do the obvious thing
for a 32-bit compat process.
Everything becomes much more straightforward this way.
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 29 Jan 2010 06:14:42 +0000 (22:14 -0800)]
Split 'flush_old_exec' into two functions
'flush_old_exec()' is the point of no return when doing an execve(), and
it is pretty badly misnamed. It doesn't just flush the old executable
environment, it also starts up the new one.
Which is very inconvenient for things like setting up the new
personality, because we want the new personality to affect the starting
of the new environment, but at the same time we do _not_ want the new
personality to take effect if flushing the old one fails.
As a result, the x86-64 '32-bit' personality is actually done using this
insane "I'm going to change the ABI, but I haven't done it yet" bit
(TIF_ABI_PENDING), with SET_PERSONALITY() not actually setting the
personality, but just the "pending" bit, so that "flush_thread()" can do
the actual personality magic.
This patch in no way changes any of that insanity, but it does split the
'flush_old_exec()' function up into a preparatory part that can fail
(still called flush_old_exec()), and a new part that will actually set
up the new exec environment (setup_new_exec()). All callers are changed
to trivially comply with the new world order.
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anuj Aggarwal [Fri, 29 Jan 2010 10:19:22 +0000 (15:49 +0530)]
ASoC: AM3517: ASoC driver not getting compiled
Commit 761c9d45 (ASoC: Fix build of OMAP sound drivers) changes
CONFIG_MACH_OMAP3517EVM -> CONFIG_SND_OMAP_SOC_OMAP3517EVM in the
Makefile. Whereas the config option defined in Kconfig is
SND_OMAP_SOC_AM3517EVM. Because of this, ASoC driver for AM3517
was not getting compiled.
Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Anuj Aggarwal [Fri, 29 Jan 2010 08:28:55 +0000 (13:58 +0530)]
ASoC: AIC23: Fixing writes to non-existing registers in resume function
Commit e9ff5eb2 (Fixing infinite loop in resume path) uses wrong AIC23
register in resume function because of which register writes happen
on some non-existing registers.
Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Paul Mundt [Fri, 29 Jan 2010 13:38:13 +0000 (22:38 +0900)]
sh: support PCI domains.
Newer SH parts are now commonly shipping with multiple controllers, so
we wire up PCI domain support to deal with them. Shamelessly cloned from
the MIPS implementation.
Paul Mundt [Fri, 29 Jan 2010 13:22:27 +0000 (22:22 +0900)]
sh: Bail out early on PCI resource conflicts.
Presently we just call in to request_resource() for the ioport and iomem
resources without checking for errors. This has already hidden a couple
of bugs, so add some error handling in for good measure.
Paul Mundt [Fri, 29 Jan 2010 13:19:04 +0000 (22:19 +0900)]
sh: Reworked SH7780 PCI initialization.
This consolidates the PCI initialization code for all of the pci-sh7780
users, and sets up the memory window dynamically as opposed to using
hardcoded window positions.
A number of bugs were fixed at the same time, including the PIO handling
and master abort timeout settings being incorrect.
Henrik Rydberg [Fri, 29 Jan 2010 06:28:27 +0000 (22:28 -0800)]
Input: add the ABS_MT_PRESSURE event
For pressure-based multi-touch devices, a direct way to send sensor
intensity data per finger is needed. This patch adds the ABS_MT_PRESSURE
event to the MT protocol.
Requested-by: Yoonyoung Shim <jy0922.shim@samsung.com> Requested-by: Mika Kuoppala <mika.kuoppala@nokia.com> Requested-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
David Härdeman [Fri, 29 Jan 2010 06:28:27 +0000 (22:28 -0800)]
Input: winbond-cir - remove dmesg spam
I missed converting one dev_info call to deb_dbg before submitting the driver.
Without this change, a message will be printed to dmesg for each button press
if a RC6 remote is used.
Linus Torvalds [Fri, 29 Jan 2010 02:48:53 +0000 (18:48 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
Fix failure exit in ipathfs
fix oops in fs/9p late mount failure
fix leak in romfs_fill_super()
get rid of pointless checks after simple_pin_fs()
Fix failure exits in bfs_fill_super()
fix affs parse_options()
Fix remount races with symlink handling in affs
Fix a leak in affs_fill_super()
Linus Torvalds [Fri, 29 Jan 2010 00:33:12 +0000 (16:33 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
x86/PCI: remove IOH range fetching
PCI: fix nested spinlock hang in aer_inject
Linus Torvalds [Thu, 28 Jan 2010 22:34:11 +0000 (14:34 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] Update mach-types
[ARM] orion5x: D-link DNS-323 rev. B1 power-off
[ARM] Orion5x: add GPIO LED and buttons for wrt350n v2
[ARM] pxa: fix irq suspend/resume for pxa25x
[ARM] pxa: fix the incorrect naming of AC97 reset pin config for pxa26x
[ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus
[ARM] Kirkwood: drive USB VBUS pin on rd88f6192-nas high on boot
[ARM] Orion: fix PCIe inbound window programming when RAM size is not a power of two
Josef Bacik [Wed, 27 Jan 2010 02:09:38 +0000 (02:09 +0000)]
Btrfs: check total number of devices when removing missing
If you have a disk failure in RAID1 and then add a new disk to the
array, and then try to remove the missing volume, it will fail. The
reason is the sanity check only looks at the total number of rw devices,
which is just 2 because we have 2 good disks and 1 bad one. Instead
check the total number of devices in the array to make sure we can
actually remove the device. Tested this with a failed disk setup and
with this test we can now run
btrfs-vol -r missing /mount/point
and it works fine.
Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Josef Bacik [Wed, 27 Jan 2010 02:09:00 +0000 (02:09 +0000)]
Btrfs: check return value of open_bdev_exclusive properly
Hit this problem while testing RAID1 failure stuff. open_bdev_exclusive
returns ERR_PTR(), not NULL. So change the return value properly. This
is important if you accidently specify a device that doesn't exist when
trying to add a new device to an array, you will panic the box
dereferencing bdev.
Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Josef Bacik [Wed, 27 Jan 2010 02:07:59 +0000 (02:07 +0000)]
Btrfs: do not mark the chunk as readonly if in degraded mode
If a RAID setup has chunks that span multiple disks, and one of those
disks has failed, btrfs_chunk_readonly will return 1 since one of the
disks in that chunk's stripes is dead and therefore not writeable. So
instead if we are in degraded mode, return 0 so we can go ahead and
allocate stuff. Without this patch all of the block groups in a RAID1
setup will end up read-only, which will mean we can't add new disks to
the array since we won't be able to make allocations.
Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Since it introduces this problem where we can run orphan cleanup on a
volume that can have orphan entries re-added. Instead of my original
fix, Yan Zheng pointed out that we can just revert my original fix and
then run the orphan cleanup in open_ctree after we look up the fs_root.
I have tested this with all the tests that gave me problems and this
patch fixes both problems. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Thu, 28 Jan 2010 21:18:15 +0000 (16:18 -0500)]
Btrfs: Add mount -o compress-force
The default btrfs mount -o compress mode will quickly back off
compressing a file if it notices that compression does not reduce the
size of the data being written. This can save considerable CPU because
all future writes to the file go through uncompressed.
But some files are both very large and have mixed data stored in
them. In that case, we want to add the ability to always try
compressing data before writing it.
This commit adds mount -o compress-force. A later commit will add
a new inode flag that does the same thing.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Linus Torvalds [Thu, 28 Jan 2010 20:59:43 +0000 (12:59 -0800)]
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs
MIPS: PowerTV: Streamline access to platform device registers
MIPS: Fix vmlinuz build for 32bit-only math shells
MIPS: Add support of LZO-compressed kernels
hw_breakpoints: Release the bp slot if arch_validate_hwbkpt_settings() fails.
On a given architecture, when hardware breakpoint registration fails
due to un-supported access type (read/write/execute), we lose the bp
slot since register_perf_hw_breakpoint() does not release the bp slot
on failure.
Hence, any subsequent hardware breakpoint registration starts failing
with 'no space left on device' error.
This patch introduces error handling in register_perf_hw_breakpoint()
function and releases bp slot on error.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Maneesh Soni <maneesh@in.ibm.com>
LKML-Reference: <20100121125516.GA32521@in.ibm.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Vmalloc is called to allocate journal->j_cnode_free_list but
we hold the reiserfs lock at this time, which raises a
{RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} lock inversion.
Just drop the reiserfs lock at this time, as it's not even
needed but kept for paranoid reasons.
This fixes:
[ INFO: inconsistent lock state ]
2.6.33-rc5 #1
---------------------------------
inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
kswapd0/313 [HC0[0]:SC0[0]:HE1:SE1] takes:
(&REISERFS_SB(s)->lock){+.+.?.}, at: [<c11118c8>]
reiserfs_write_lock_once+0x28/0x50
{RECLAIM_FS-ON-W} state was registered at:
[<c104ee32>] mark_held_locks+0x62/0x90
[<c104eefa>] lockdep_trace_alloc+0x9a/0xc0
[<c108f7b6>] kmem_cache_alloc+0x26/0xf0
[<c108621c>] __get_vm_area_node+0x6c/0xf0
[<c108690e>] __vmalloc_node+0x7e/0xa0
[<c1086aab>] vmalloc+0x2b/0x30
[<c110e1fb>] journal_init+0x6cb/0xa10
[<c10f90a2>] reiserfs_fill_super+0x342/0xb80
[<c1095665>] get_sb_bdev+0x145/0x180
[<c10f68e1>] get_super_block+0x21/0x30
[<c1094520>] vfs_kern_mount+0x40/0xd0
[<c1094609>] do_kern_mount+0x39/0xd0
[<c10aaa97>] do_mount+0x2c7/0x6d0
[<c10aaf06>] sys_mount+0x66/0xa0
[<c16198a7>] mount_block_root+0xc4/0x245
[<c1619a81>] mount_root+0x59/0x5f
[<c1619b98>] prepare_namespace+0x111/0x14b
[<c1619269>] kernel_init+0xcf/0xdb
[<c100303a>] kernel_thread_helper+0x6/0x1c
irq event stamp: 63236801
hardirqs last enabled at (63236801): [<c134e7fa>]
__mutex_unlock_slowpath+0x9a/0x120
hardirqs last disabled at (63236800): [<c134e799>]
__mutex_unlock_slowpath+0x39/0x120
softirqs last enabled at (63218800): [<c102f451>] __do_softirq+0xc1/0x110
softirqs last disabled at (63218789): [<c102f4ed>] do_softirq+0x4d/0x60
other info that might help us debug this:
2 locks held by kswapd0/313:
#0: (shrinker_rwsem){++++..}, at: [<c1074bb4>] shrink_slab+0x24/0x170
#1: (&type->s_umount_key#19){++++..}, at: [<c10a2edd>]
shrink_dcache_memory+0xfd/0x1a0
Paul Mundt [Thu, 28 Jan 2010 09:26:37 +0000 (18:26 +0900)]
sh: Kill off superfluous sh_bios references from compressed loader.
The VBR value needs to be initialized in order for any of the bios
trapping to work, and as we don't do that until slightly later in the
boot process, this has no real chance of working.
The only reason for using this in the past was due to the fact that early
serial initialization wasn't possible, but now that early sh-sci is
supported by everyone, there's no longer any reason to support the
sh_bios hacks in the first place. Given that, we just kill off the
references completely.
Paul Mundt [Thu, 28 Jan 2010 06:55:37 +0000 (15:55 +0900)]
sh: Quiet noisy coherent DMA unmapping on R2D.
IRQs are re-enabled at a later stage when doing the unmapping on R2D via
the sm501 USB coherent DMA, resulting in the irqs_disabled() check
producing considerable noise for this configuration. Just kill off the
check, which was blindly copied from x86 anyways.
Paul Mundt [Thu, 28 Jan 2010 06:08:21 +0000 (15:08 +0900)]
sh: mach-titan: Kill off unused PIO port mangling.
Nothing is using this, kill it off. Fixing up access sizes can be done
with trapped I/O for anyone wanting to make use of this for devices that
need it, everything else is already pure MMIO.
Frans Pop [Mon, 25 Jan 2010 13:56:34 +0000 (14:56 +0100)]
sched: Correct printk whitespace in warning from cpu down task check
Due to an incorrect line break the output currently contains tabs.
Also remove trailing space.
The actual output that logcheck sent me looked like this:
Task events/1 (pid = 10) is on cpu 1^I^I^I^I(state = 1, flags = 84208040)
After this patch it becomes:
Task events/1 (pid = 10) is on cpu 1 (state = 1, flags = 84208040)
Signed-off-by: Frans Pop <elendilplanet.nl> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <201001251456.34996.elendil@planet.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
projects / mv-sheeva.git / log