Linus Torvalds [Fri, 23 Dec 2016 18:41:53 +0000 (10:41 -0800)]
Merge tag 'drm-fixes-for-4.10-rc1' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Some fixes came in while I was out, mostly intel and amdgpu ones, with
one ast fix"
Daniel Vetter says:
"This should also shut up the WARN_ON(!intel_dp->lane_count) noise"
* tag 'drm-fixes-for-4.10-rc1' of git://people.freedesktop.org/~airlied/linux: (35 commits)
drm/amdgpu: update tile table for oland/hainan
drm/amdgpu: update tile table for verde
drm/amdgpu: update rev id for verde
drm/amdgpu: update golden setting for verde
drm/amdgpu: update rev id for oland
drm/amdgpu: update golden setting for oland
drm/amdgpu: update rev id for hainan
drm/amdgpu: update golden setting for hainan
drm/amdgpu: update rev id for pitcairn
drm/amdgpu: update golden setting for pitcairn
drm/amdgpu: update golden setting/tiling table of tahiti
drm/i915: skip the first 4k of stolen memory on everything >= gen8
drm/i915: Fallback to single PAGE_SIZE segments for DMA remapping
drm/i915: Fix use after free in logical_render_ring_init
drm/i915: disable PSR by default on HSW/BDW
drm/i915: Fix setting of boost freq tunable
drm/i915: tune down the fast link training vs boot fail
drm/i915: Reorder phys backing storage release
drm/i915/gen9: Fix PCODE polling during SAGV disabling
drm/i915/gen9: Fix PCODE polling during CDCLK change notification
...
Linus Torvalds [Fri, 23 Dec 2016 18:38:48 +0000 (10:38 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"First round of -rc fixes for 4.10 kernel:
- a series of qedr fixes
- a series of rxe fixes
- one i40iw fix
- one cma fix
- one cxgb4 fix"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/rxe: Don't check for null ptr in send()
IB/rxe: Drop future atomic/read packets rather than retrying
IB/rxe: Use BTH_PSN_MASK when ACKing duplicate sends
qedr: Always notify the verb consumer of flushed CQEs
qedr: clear the vendor error field in the work completion
qedr: post_send/recv according to QP state
qedr: ignore inline flag in read verbs
qedr: modify QP state to error when destroying it
qedr: return correct value on modify qp
qedr: return error if destroy CQ failed
qedr: configure the number of CQEs on CQ creation
i40iw: Set 128B as the only supported RQ WQE size
IB/cma: Fix a race condition in iboe_addr_get_sgid()
IB/rxe: Fix a memory leak in rxe_qp_cleanup()
iw_cxgb4: set correct FetchBurstMax for QPs
Linus Torvalds [Fri, 23 Dec 2016 18:36:19 +0000 (10:36 -0800)]
Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull late SCSI updates from James Bottomley:
"This is mostly stuff which missed the initial pull.
There's a new driver: qedi, and some ufs, ibmvscsis and ncr5380
updates plus some assorted driver fixes and also a fix for the bug
where if a device goes into a blocked state between configuration and
sysfs device add (which can be a long time under async probing) it
would become permanently blocked"
* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (30 commits)
scsi: avoid a permanent stop of the scsi device's request queue
scsi: mpt3sas: Recognize and act on iopriority info
scsi: qla2xxx: Fix Target mode handling with Multiqueue changes.
scsi: qla2xxx: Add Block Multi Queue functionality.
scsi: qla2xxx: Add multiple queue pair functionality.
scsi: qla2xxx: Utilize pci_alloc_irq_vectors/pci_free_irq_vectors calls.
scsi: qla2xxx: Only allow operational MBX to proceed during RESET.
scsi: hpsa: remove memory allocate failure message
scsi: Update 3ware driver email addresses
scsi: zfcp: fix rport unblock race with LUN recovery
scsi: zfcp: do not trace pure benign residual HBA responses at default level
scsi: zfcp: fix use-after-"free" in FC ingress path after TMF
scsi: libcxgbi: return error if interface is not up
scsi: cxgb4i: libcxgbi: add missing module_put()
scsi: cxgb4i: libcxgbi: cxgb4: add T6 iSCSI completion feature
scsi: cxgb4i: libcxgbi: add active open cmd for T6 adapters
scsi: cxgb4i: use cxgb4_tp_smt_idx() to get smt_idx
scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.
scsi: aacraid: remove wildcard for series 9 controllers
scsi: ibmvscsi: add write memory barrier to CRQ processing
...
Linus Torvalds [Fri, 23 Dec 2016 18:22:47 +0000 (10:22 -0800)]
Merge tag 'arc-4.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull more ARC updates from Vineet Gupta:
- Fix for aliasing VIPT dcache in old ARC700 cores
- micro-optimization in ARC700 ProtV handler
- Enable SG_CHAIN [Vladimir]
- ARC HS38 core intc default to prio 1
* tag 'arc-4.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: mm: arc700: Don't assume 2 colours for aliasing VIPT dcache
ARC: mm: No need to save cache version in @cpuinfo
ARC: enable SG chaining
ARCv2: intc: default all interrupts to priority 1
ARCv2: entry: document intr disable in hard isr
ARC: ARCompact entry: elide re-reading ECR in ProtV handler
Dave Airlie [Thu, 22 Dec 2016 19:28:02 +0000 (05:28 +1000)]
Merge tag 'drm-intel-next-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes
First set of i915 fixes for code in next.
* tag 'drm-intel-next-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: skip the first 4k of stolen memory on everything >= gen8
drm/i915: Fallback to single PAGE_SIZE segments for DMA remapping
drm/i915: Fix use after free in logical_render_ring_init
drm/i915: disable PSR by default on HSW/BDW
drm/i915: Fix setting of boost freq tunable
drm/i915: tune down the fast link training vs boot fail
drm/i915: Reorder phys backing storage release
drm/i915/gen9: Fix PCODE polling during SAGV disabling
drm/i915/gen9: Fix PCODE polling during CDCLK change notification
drm/i915/dsi: Fix chv_exec_gpio disabling the GPIOs it is setting
drm/i915/dsi: Fix swapping of MIPI_SEQ_DEASSERT_RESET / MIPI_SEQ_ASSERT_RESET
drm/i915/dsi: Do not clear DPOUNIT_CLOCK_GATE_DISABLE from vlv_init_display_clock_gating
drm/i915: drop the struct_mutex when wedged or trying to reset
Dave Airlie [Thu, 22 Dec 2016 19:25:12 +0000 (05:25 +1000)]
Merge branch 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
- fix display regression on DCE6/8
- Powergating fixes for GFX8
- amdgpu SI fixes (golden settings, proper rev id setup, etc.)
* 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (21 commits)
drm/amdgpu: update tile table for oland/hainan
drm/amdgpu: update tile table for verde
drm/amdgpu: update rev id for verde
drm/amdgpu: update golden setting for verde
drm/amdgpu: update rev id for oland
drm/amdgpu: update golden setting for oland
drm/amdgpu: update rev id for hainan
drm/amdgpu: update golden setting for hainan
drm/amdgpu: update rev id for pitcairn
drm/amdgpu: update golden setting for pitcairn
drm/amdgpu: update golden setting/tiling table of tahiti
drm/amdgpu: fix cursor setting of dce6/dce8
drm/amdgpu: refine set clock gating for tonga/polaris
drm/amdgpu: initialize cg flags for tonga/polaris10/polaris11.
drm/amdgpu: add new gfx cg flags.
drm/amdgpu: fix pg can't be disabled by PG mask.
drm/amdgpu: always initialize gfx pg for gfx_v8.0.
drm/amdgpu: enable AMD_PG_SUPPORT_CP in Carrizo/Stoney.
drm/amdgpu: fix init save/restore list in gfx_v8.0
drm/amdgpu: fix enable_cp_power_gating in gfx_v8.0.
...
Linus Torvalds [Thu, 22 Dec 2016 18:31:30 +0000 (10:31 -0800)]
Merge tag 'leds_for_4.10_email_update' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED maintainer email update from Jacek Anaszewski:
"Update Jacek Anaszewski's email address"
* tag 'leds_for_4.10_email_update' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
MAINTAINERS: Update Jacek Anaszewski's email address
Linus Torvalds [Thu, 22 Dec 2016 18:23:39 +0000 (10:23 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"Just a set of small fixes that have either been queued up after the
original pull for this merge window, or just missed the original pull
request.
- a few bcache fixes/changes from Eric and Kent
- add WRITE_SAME to the command filter whitelist frm Mauricio
- kill an unused struct member from Ritesh
- partition IO alignment fix from Stefan
- nvme sysfs printf fix from Stephen"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: check partition alignment
nvme : Use correct scnprintf in cmb show
block: allow WRITE_SAME commands with the SG_IO ioctl
block: Remove unused member (busy) from struct blk_queue_tag
bcache: partition support: add 16 minors per bcacheN device
bcache: Make gc wakeup sane, remove set_task_state()
Linus Torvalds [Thu, 22 Dec 2016 18:19:32 +0000 (10:19 -0800)]
Merge tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"Here are new versions of two ACPICA changes that were deferred
previously due to a problem they had introduced, two cleanups on top
of them and the removal of a useless warning message from the ACPI
core.
Specifics:
- Move some Linux-specific functionality to upstream ACPICA and
update the in-kernel users of it accordingly (Lv Zheng)
- Drop a useless warning (triggered by the lack of an optional
object) from the ACPI namespace scanning code (Zhang Rui)"
* tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory()
ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users
ACPICA: Tables: Allow FADT to be customized with virtual address
ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel
ACPI: do not warn if _BQC does not exist
Linus Torvalds [Thu, 22 Dec 2016 18:15:05 +0000 (10:15 -0800)]
Merge tag 'pm-fixes-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"They fix one bug introduced recently, a build warning and a kerneldoc
function description.
Specifics:
- Prevent the acpi-cpufreq driver from crashing on exit by fixing a
check against the __cpuhp_setup_state() return value and fix the
kerneldoc description of that function to make it clear that it may
return positive numbers on success too (Boris Ostrovsky)
- Drop an incorrect __init annotation of a function in the s3c64xx
cpufreq driver and fix a build warning generated (by older
compilers) because of it (Arnd Bergmann)"
* tag 'pm-fixes-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: s3c64xx: remove incorrect __init annotation
cpufreq: Remove CPU hotplug callbacks only if they were initialized
CPU/hotplug: Clarify description of __cpuhp_setup_state() return value
Linus Torvalds [Thu, 22 Dec 2016 18:03:52 +0000 (10:03 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull SElinux fix from James Morris:
"From Paul:
'A small SELinux patch to fix some clang/llvm compiler warnings and
ensure the tools under scripts work well in the face of kernel
changes'"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
selinux: use the kernel headers when building scripts/selinux
Linus Torvalds [Thu, 22 Dec 2016 17:25:45 +0000 (09:25 -0800)]
Merge branch 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache allocation interface from Thomas Gleixner:
"This provides support for Intel's Cache Allocation Technology, a cache
partitioning mechanism.
The interface is odd, but the hardware interface of that CAT stuff is
odd as well.
We tried hard to come up with an abstraction, but that only allows
rather simple partitioning, but no way of sharing and dealing with the
per package nature of this mechanism.
In the end we decided to expose the allocation bitmaps directly so all
combinations of the hardware can be utilized.
There are two ways of associating a cache partition:
- Task
A task can be added to a resource group. It uses the cache
partition associated to the group.
- CPU
All tasks which are not member of a resource group use the group to
which the CPU they are running on is associated with.
That allows for simple CPU based partitioning schemes.
The main expected user sare:
- Virtualization so a VM can only trash only the associated part of
the cash w/o disturbing others
- Real-Time systems to seperate RT and general workloads.
- Latency sensitive enterprise workloads
- In theory this also can be used to protect against cache side
channel attacks"
[ Intel RDT is "Resource Director Technology". The interface really is
rather odd and very specific, which delayed this pull request while I
was thinking about it. The pull request itself came in early during
the merge window, I just delayed it until things had calmed down and I
had more time.
But people tell me they'll use this, and the good news is that it is
_so_ specific that it's rather independent of anything else, and no
user is going to depend on the interface since it's pretty rare. So if
push comes to shove, we can just remove the interface and nothing will
break ]
* 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
x86/intel_rdt: Implement show_options() for resctrlfs
x86/intel_rdt: Call intel_rdt_sched_in() with preemption disabled
x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmount
x86/intel_rdt: Fix setting of closid when adding CPUs to a group
x86/intel_rdt: Update percpu closid immeditately on CPUs affected by changee
x86/intel_rdt: Reset per cpu closids on unmount
x86/intel_rdt: Select KERNFS when enabling INTEL_RDT_A
x86/intel_rdt: Prevent deadlock against hotplug lock
x86/intel_rdt: Protect info directory from removal
x86/intel_rdt: Add info files to Documentation
x86/intel_rdt: Export the minimum number of set mask bits in sysfs
x86/intel_rdt: Propagate error in rdt_mount() properly
x86/intel_rdt: Add a missing #include
MAINTAINERS: Add maintainer for Intel RDT resource allocation
x86/intel_rdt: Add scheduler hook
x86/intel_rdt: Add schemata file
x86/intel_rdt: Add tasks files
x86/intel_rdt: Add cpus file
x86/intel_rdt: Add mkdir to resctrl file system
x86/intel_rdt: Add "info" files to resctrl file system
...
Andrew Boyer [Thu, 22 Dec 2016 13:54:37 +0000 (08:54 -0500)]
IB/rxe: Drop future atomic/read packets rather than retrying
If the completer is in the middle of a large read operation, one
lost packet can cause havoc. Going to COMPST_ERROR_RETRY will
cause the requester to resend the request. After that, any packet
from the first attempt still in the receive queue will be
interpreted as an error, restarting the error/retry sequence.
The transfer will quickly exhaust its retries.
This behavior is very noticeable when doing 512KB reads on a
QEMU system configured with 1500B MTU.
Also, a resent request here will prompt the responder on the
other side to immediately start resending, but the resent
packets will get stuck in the already-loaded receive queue and
will never be processed.
Rather than erroring out every time an unexpected future packet
arrives, just drop it. Eventually the retry timer will send a
duplicate request; the completer will be able to make progress since
the queue will start relatively empty.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Amrani, Ram [Thu, 22 Dec 2016 12:40:37 +0000 (14:40 +0200)]
qedr: ignore inline flag in read verbs
In the current implementation a read verb with IB_SEND_INLINE may be
illegally configured.
In this fix we ignore the inline bit in the case of a read verb.
Amrani, Ram [Thu, 22 Dec 2016 12:40:36 +0000 (14:40 +0200)]
qedr: modify QP state to error when destroying it
Current code didn't modify the QP state to error because it queried the
QP state as a bitmap while it isn't. So the code never got executed.
This patch fixes this and queries for each QP state respectively and not
at once via a bitmask.
Bart Van Assche [Mon, 19 Dec 2016 17:00:05 +0000 (18:00 +0100)]
IB/cma: Fix a race condition in iboe_addr_get_sgid()
Code that dereferences the struct net_device ip_ptr member must be
protected with an in_dev_get() / in_dev_put() pair. Hence insert
calls to these functions.
Fixes: commit 7b85627b9f02 ("IB/cma: IBoE (RoCE) IP-based GID addressing") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Roland Dreier <roland@purestorage.com> Cc: <stable@vger.kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
* pm-cpufreq:
cpufreq: s3c64xx: remove incorrect __init annotation
cpufreq: Remove CPU hotplug callbacks only if they were initialized
CPU/hotplug: Clarify description of __cpuhp_setup_state() return value
* acpica:
ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory()
ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users
ACPICA: Tables: Allow FADT to be customized with virtual address
ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel
* acpi-scan:
ACPI: do not warn if _BQC does not exist
Linus Torvalds [Wed, 21 Dec 2016 18:59:34 +0000 (10:59 -0800)]
splice: reinstate SIGPIPE/EPIPE handling
Commit 8924feff66f3 ("splice: lift pipe_lock out of splice_to_pipe()")
caused a regression when there were no more readers left on a pipe that
was being spliced into: rather than the expected SIGPIPE and -EPIPE
return value, the writer would end up waiting forever for space to free
up (which obviously was not going to happen with no readers around).
Fixes: 8924feff66f3 ("splice: lift pipe_lock out of splice_to_pipe()") Reported-and-tested-by: Andreas Schwab <schwab@linux-m68k.org> Debugged-by: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org # v4.9 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 21 Dec 2016 18:47:13 +0000 (10:47 -0800)]
Merge branch 'parisc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- add Kernel address space layout randomization support
- re-enable interrupts earlier now that we have a working IRQ stack
- optimize the timer interrupt function to better cope with missed
timer irqs
- fix error return code in parisc perf code (by Dan Carpenter)
- fix PAT debug code
* 'parisc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Optimize timer interrupt function
parisc: perf: return -EFAULT on error
parisc: Enhance CPU detection code on PAT machines
parisc: Re-enable interrupts early
parisc: Enable KASLR
Linus Torvalds [Wed, 21 Dec 2016 18:40:30 +0000 (10:40 -0800)]
Merge tag 'nfs-for-4.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull more NFS client updates from Trond Myklebust:
"Highlights include:
- further attribute cache improvements to make revalidation more fine
grained
- NFSv4 locking improvements
Bugfixes:
- nfs4_fl_prepare_ds must be careful about reporting success in files
layout
- pNFS/flexfiles: Instead of marking a device inactive, remove it
from the cache"
* tag 'nfs-for-4.10-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Retry the DELEGRETURN if the embedded GETATTR is rejected with EACCES
NFS: Retry the CLOSE if the embedded GETATTR is rejected with EACCES
NFSv4: Place the GETATTR operation before the CLOSE
NFSv4: Also ask for attributes when downgrading to a READ-only state
NFS: Don't abuse NFS_INO_REVAL_FORCED in nfs_post_op_update_inode_locked()
pNFS: Return RW layouts on OPEN_DOWNGRADE
NFSv4: Add encode/decode of the layoutreturn op in OPEN_DOWNGRADE
NFS: Don't disconnect open-owner on NFS4ERR_BAD_SEQID
NFSv4: ensure __nfs4_find_lock_state returns consistent result.
NFSv4.1: nfs4_fl_prepare_ds must be careful about reporting success.
pNFS/flexfiles: delete deviceid, don't mark inactive
NFS: Clean up nfs_attribute_timeout()
NFS: Remove unused function nfs_revalidate_inode_rcu()
NFS: Fix and clean up the access cache validity checking
NFS: Only look at the change attribute cache state in nfs_weak_revalidate()
NFS: Clean up cache validity checking
NFS: Don't revalidate the file on close if we hold a delegation
NFSv4: Don't discard the attributes returned by asynchronous DELEGRETURN
NFSv4: Update the attribute cache info in update_changeattr
Linus Torvalds [Wed, 21 Dec 2016 18:16:05 +0000 (10:16 -0800)]
Merge branch 'scsi-target-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux
Pull scsi target cleanups from Bart Van Assche:
"The changes here are:
- a few small bug fixes for the iSCSI and user space target drivers.
- minimize the target build time by about 30% by rearranging #include
directives
- fix the second argument passed to percpu_ida_alloc()
- reduce the number of false positive warnings reported by sparse
These patches pass Wu Fengguang's build bot tests and also the
linux-next tests"
* 'scsi-target-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux:
iscsi-target: Return error if unable to add network portal
target: Fix spelling mistake and unwrap multi-line text
target/iscsi: Fix double free in lio_target_tiqn_addtpg()
target/user: Fix use-after-free of tcmu_cmds if they are expired
target: Minimize #include directives
target/user: Add an #include directive
cxgbit: Add an #include directive
ibmvscsi_tgt: Add two #include directives
sbp-target: Add an #include directive
qla2xxx: Add an #include directive
configfs: Minimize #include directives
usb: gadget: Fix second argument of percpu_ida_alloc()
sbp-target: Fix second argument of percpu_ida_alloc()
target/user: Fix a data type in tcmu_queue_cmd()
target: Use NULL instead of 0 to represent a pointer
The commit was intended to cover the race condition, but it introduced
yet another regression for devices with the implicit feedback, leading
to a kernel panic due to NULL-dereference in an irq context.
As the race condition that was addressed by the commit is very rare
and the regression is much worse, let's revert the commit for rc1, and
fix the issue properly in a later patch.
Paul Moore [Wed, 21 Dec 2016 15:39:25 +0000 (10:39 -0500)]
selinux: use the kernel headers when building scripts/selinux
Commit 3322d0d64f4e ("selinux: keep SELinux in sync with new capability
definitions") added a check on the defined capabilities without
explicitly including the capability header file which caused problems
when building genheaders for users of clang/llvm. Resolve this by
using the kernel headers when building genheaders, which is arguably
the right thing to do regardless, and explicitly including the
kernel's capability.h header file in classmap.h. We also update the
mdp build, even though it wasn't causing an error we really should
be using the headers from the kernel we are building.
Reported-by: Nicolas Iooss <nicolas.iooss@m4x.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
Paul Burton [Fri, 11 Nov 2016 14:22:36 +0000 (14:22 +0000)]
mmc: sd: Meet alignment requirements for raw_ssr DMA
The mmc_read_ssr() function results in DMA to the raw_ssr member of
struct mmc_card, which is not guaranteed to be cache line aligned & thus
might not meet the requirements set out in Documentation/DMA-API.txt:
Warnings: Memory coherency operates at a granularity called the cache
line width. In order for memory mapped by this API to operate
correctly, the mapped region must begin exactly on a cache line
boundary and end exactly on one (to prevent two separately mapped
regions from sharing a single cache line). Since the cache line size
may not be known at compile time, the API will not enforce this
requirement. Therefore, it is recommended that driver writers who
don't take special care to determine the cache line size at run time
only map virtual regions that begin and end on page boundaries (which
are guaranteed also to be cache line boundaries).
On some systems where DMA is non-coherent this can lead to us losing
data that shares cache lines with the raw_ssr array.
Fix this by kmalloc'ing a temporary buffer to perform DMA into. kmalloc
will ensure the buffer is suitably aligned, allowing the DMA to be
performed without any loss of data.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 5275a652d296 ("mmc: sd: Export SD Status via “ssr” device attribute") Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
s3c64xx_cpufreq_config_regulator is incorrectly annotated
as __init, since the caller is also not init:
WARNING: vmlinux.o(.text+0x92fe1c): Section mismatch in reference from the function s3c64xx_cpufreq_driver_init() to the function .init.text:s3c64xx_cpufreq_config_regulator()
With modern gcc versions, the function gets inline, so we don't
see the warning, this only happens with gcc-4.6 and older.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Boris Ostrovsky [Thu, 15 Dec 2016 15:00:58 +0000 (10:00 -0500)]
cpufreq: Remove CPU hotplug callbacks only if they were initialized
Since CPU hotplug callbacks are requested for CPUHP_AP_ONLINE_DYN state,
successful callback initialization will result in cpuhp_setup_state()
returning a positive value. Therefore acpi_cpufreq_online being zero
indicates that callbacks have not been installed.
This means that acpi_cpufreq_boost_exit() should only remove them if
acpi_cpufreq_online is positive. Trying to call
cpuhp_remove_state_nocalls(0) will cause a BUG().
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Boris Ostrovsky [Thu, 15 Dec 2016 15:00:57 +0000 (10:00 -0500)]
CPU/hotplug: Clarify description of __cpuhp_setup_state() return value
When ivoked with CPUHP_AP_ONLINE_DYN state __cpuhp_setup_state()
is expected to return positive value which is the hotplug state that
the routine assigns.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since all users are cleaned up, remove the 2 deprecated APIs due to no
users.
As a Linux variable rather than an ACPICA variable, acpi_gbl_permanent_mmap
is renamed to acpi_permanent_mmap to have a consistent coding style across
entire Linux ACPI subsystem.
Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch removes the users of the deprectated APIs:
acpi_get_table_with_size()
early_acpi_os_unmap_memory()
The following APIs should be used instead of:
acpi_get_table()
acpi_put_table()
The deprecated APIs are invented to be a replacement of acpi_get_table()
during the early stage so that the early mapped pointer will not be stored
in ACPICA core and thus the late stage acpi_get_table() won't return a
wrong pointer. The mapping size is returned just because it is required by
early_acpi_os_unmap_memory() to unmap the pointer during early stage.
But as the mapping size equals to the acpi_table_header.length
(see acpi_tb_init_table_descriptor() and acpi_tb_validate_table()), when
such a convenient result is returned, driver code will start to use it
instead of accessing acpi_table_header to obtain the length.
Thus this patch cleans up the drivers by replacing returned table size with
acpi_table_header.length, and should be a no-op.
Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
FADT parsing code requires FADT to be installed as
ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL, using new
acpi_tb_get_table()/acpi_tb_put_table(), other address types can also be allowed,
thus facilitates FADT customization with virtual address. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/d98de9ca Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch back ports Linux acpi_get_table_with_size() and
early_acpi_os_unmap_memory() into ACPICA upstream to reduce divergences.
The 2 APIs are used by Linux as table management APIs for long time, it
contains a hidden logic that during the early stage, the mapped tables
should be unmapped before the early stage ends.
During the early stage, tables are handled by the following sequence:
acpi_get_table_with_size();
parse the table
early_acpi_os_unmap_memory();
During the late stage, tables are handled by the following sequence:
acpi_get_table();
parse the table
Linux uses acpi_gbl_permanent_mmap to distinguish the early stage and the
late stage.
The reasoning of introducing acpi_get_table_with_size() is: ACPICA will
remember the early mapped pointer in acpi_get_table() and Linux isn't able to
prevent ACPICA from using the wrong early mapped pointer during the late
stage as there is no API provided from ACPICA to be an inverse of
acpi_get_table() to forget the early mapped pointer.
But how ACPICA can work with the early/late stage requirement? Inside of
ACPICA, tables are ensured to be remained in "INSTALLED" state during the
early stage, and they are carefully not transitioned to "VALIDATED" state
until the late stage. So the same logic is in fact implemented inside of
ACPICA in a different way. The gap is only that the feature is not provided
to the OSPMs in an accessible external API style.
It then is possible to fix the gap by providing an inverse of
acpi_get_table() from ACPICA, so that the two Linux sequences can be
combined:
acpi_get_table();
parse the table
acpi_put_table();
In order to work easier with the current Linux code, acpi_get_table() and
acpi_put_table() is implemented in a usage counting based style:
1. When the usage count of the table is increased from 0 to 1, table is
mapped and .Pointer is set with the mapping address (VALIDATED);
2. When the usage count of the table is decreased from 1 to 0, .Pointer
is unset and the mapping address is unmapped (INVALIDATED).
So that we can deploy the new APIs to Linux with minimal effort by just
invoking acpi_get_table() in acpi_get_table_with_size() and invoking
acpi_put_table() in early_acpi_os_unmap_memory(). Lv Zheng.
Link: https://github.com/acpica/acpica/commit/cac67909 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull networking fixes and cleanups from David Miller:
1) Use rb_entry() instead of hardcoded container_of(), from Geliang
Tang.
2) Use correct memory barriers in stammac driver, from Pavel Machek.
3) Fix assoc bind address handling in SCTP, from Xin Long.
4) Make the length check for UFO handling consistent between
__ip_append_data() and ip_finish_output(), from Zheng Li.
5) HSI driver compatible strings were busted fro hix5hd2, from Dongpo
Li.
6) Handle devm_ioremap() errors properly in cavium driver, from Arvind
Yadav.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
RDS: use rb_entry()
net_sched: sch_netem: use rb_entry()
net_sched: sch_fq: use rb_entry()
net/mlx5: use rb_entry()
ethernet: sfc: Add Kconfig entry for vendor Solarflare
sctp: not copying duplicate addrs to the assoc's bind address list
sctp: reduce indent level in sctp_copy_local_addr_list
ARM: dts: hix5hd2: don't change the existing compatible string
net: hix5hd2_gmac: fix compatible strings name
openvswitch: Add a missing break statement.
net: netcp: ethss: fix 10gbe host port tx pri map configuration
net: netcp: ethss: fix errors in ethtool ops
fsl/fman: enable compilation on ARM64
fsl/fman: A007273 only applies to PPC SoCs
powerpc: fsl/fman: remove fsl,fman from of_device_ids[]
fsl/fman: fix 1G support for QSGMII interfaces
dt: bindings: net: use boolean dt properties for eee broken modes
net: phy: use boolean dt properties for eee broken modes
net: phy: fix sign type error in genphy_config_eee_advert
ipv4: Should use consistent conditional judgement for ip fragment in __ip_append_data and ip_finish_output
...
Linus Torvalds [Tue, 20 Dec 2016 23:24:32 +0000 (15:24 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge final set of updates from Andrew Morton:
- a series to make IMA play better across kexec
- a handful of random fixes
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
printk: fix typo in CONSOLE_LOGLEVEL_DEFAULT help text
ratelimit: fix WARN_ON_RATELIMIT return value
kcov: make kcov work properly with KASLR enabled
arm64: setup: introduce kaslr_offset()
mm: fadvise: avoid expensive remote LRU cache draining after FADV_DONTNEED
ima: platform-independent hash value
ima: define a canonical binary_runtime_measurements list format
ima: support restoring multiple template formats
ima: store the builtin/custom template definitions in a list
ima: on soft reboot, save the measurement list
powerpc: ima: send the kexec buffer to the next kernel
ima: maintain memory size needed for serializing the measurement list
ima: permit duplicate measurement list entries
ima: on soft reboot, restore the measurement list
powerpc: ima: get the kexec buffer passed by the previous kernel
Linus Torvalds [Tue, 20 Dec 2016 23:17:55 +0000 (15:17 -0800)]
Merge tag 'doc-4.10-3' of git://git.lwn.net/linux
Pull documentation fix from Jonathan Corbet:
"A single fix for the build system.
It would appear that the docutils developers, in their wisdom, broke
the API in the 0.13 release. This fix detects the breakage and allows
the docs to be built with both the old and new versions"
* tag 'doc-4.10-3' of git://git.lwn.net/linux:
docs: sphinx-extensions: make rstFlatTable work with docutils 0.13
Linus Torvalds [Tue, 20 Dec 2016 23:16:00 +0000 (15:16 -0800)]
Merge tag 'microblaze-4.10-rc1' of git://git.monstr.eu/linux-2.6-microblaze
Pull arch/microblaze updates from Michal Simek:
- wire-up new syscalls
- add new codes and fpga families
- fix a return value
* tag 'microblaze-4.10-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Add new fpga families
microblaze: Add missing release version code v9.6 and v10
microblaze: Add missing syscalls
microblaze: Fix return value from xilinx_timer_init
- clean up arch/xtensa/kernel/setup.c: move S32C1I self-test out of it,
remove unused declarations, fix screen_info definition
* tag 'xtensa-20161219' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: update DMA-related Documentation/features entries
xtensa: configure shared DMA pool reservation in kc705 DTS
xtensa: enable HAVE_DMA_CONTIGUOUS
xtensa: move S32C1I self-test to a separate file
xtensa: fix screen_info, clean up unused declarations in setup.c
Helge Deller [Tue, 20 Dec 2016 19:51:10 +0000 (20:51 +0100)]
parisc: Optimize timer interrupt function
Restructure the timer interrupt function to better cope with missed timer irqs.
Optimize the calculation when the next interrupt should happen and skip irqs if
they would happen too shortly after exit of the irq function.
The update_process_times() call is done anyway at every timer irq, so we can
safely drop the prof_counter and prof_multiplier variables from the per_cpu
structure.
Geliang Tang [Tue, 20 Dec 2016 14:02:18 +0000 (22:02 +0800)]
RDS: use rb_entry()
To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Tue, 20 Dec 2016 14:02:14 +0000 (22:02 +0800)]
net/mlx5: use rb_entry()
To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: Geliang Tang <geliangtang@gmail.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Tue, 20 Dec 2016 13:38:26 +0000 (14:38 +0100)]
ethernet: sfc: Add Kconfig entry for vendor Solarflare
Since commit
5a6681e22c14 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")
there are two drivers for Solarflare devices, but both still show up
directly beneath "Ethernet driver support" in the Kconfig. Follow the
pattern of other vendors and group them beneath an own vendor Kconfig
entry for Solarflare.
Cc: Edward Cree <ecree@solarflare.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 20 Dec 2016 05:49:50 +0000 (13:49 +0800)]
sctp: not copying duplicate addrs to the assoc's bind address list
sctp.local_addr_list is a global address list that is supposed to include
all the local addresses. sctp updates this list according to NETDEV_UP/
NETDEV_DOWN notifications.
However, if multiple NICs have the same address, the global list would
have duplicate addresses. Even if for one NIC, promote secondaries in
__inet_del_ifa can also lead to accumulating duplicate addresses.
When sctp binds address 'ANY' and creates a connection, it copies all
the addresses from global list into asoc's bind addr list, which makes
sctp pack the duplicate addresses into INIT/INIT_ACK packets.
This patch is to filter the duplicate addresses when copying the addrs
from global list in sctp_copy_local_addr_list and unpacking addr_param
from cookie in sctp_raw_to_bind_addrs to asoc's bind addr list.
Note that we can't filter the duplicate addrs when global address list
gets updated, As NETDEV_DOWN event may remove an addr that still exists
in another NIC.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 20 Dec 2016 05:49:49 +0000 (13:49 +0800)]
sctp: reduce indent level in sctp_copy_local_addr_list
This patch is to reduce indent level by using continue when the addr
is not allowed, and also drop end_copy by using break.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 20 Dec 2016 19:12:30 +0000 (14:12 -0500)]
Merge branch 'hix5hd2_gmac-compatible-string'
Dongpo Li says:
====================
net: hix5hd2_gmac: keep the compatible string not changed
This patch series fix the patch: d0fb6ba75dc0 ("net: hix5hd2_gmac: add generic compatible string")
The SoC hix5hd2 compatible string has the suffix "-gmac" and
we should not change its compatible string.
So we should name all the compatible string with the suffix "-gmac".
Creating a new name suffix "-gemac" is unnecessary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dongpo Li [Tue, 20 Dec 2016 02:09:29 +0000 (10:09 +0800)]
ARM: dts: hix5hd2: don't change the existing compatible string
The SoC hix5hd2 compatible string has the suffix "-gmac" and
we should not change it.
We should only add the generic compatible string "hisi-gmac-v1".
Fixes: 0855950ba580 ("ARM: dts: hix5hd2: add gmac generic compatible and clock names") Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dongpo Li [Tue, 20 Dec 2016 02:09:28 +0000 (10:09 +0800)]
net: hix5hd2_gmac: fix compatible strings name
The SoC hix5hd2 compatible string has the suffix "-gmac" and
we should not change its compatible string.
So we should name all the compatible string with the suffix "-gmac".
Creating a new name suffix "-gemac" is unnecessary.
We also add another SoC compatible string in dt binding documentation
and describe which generic version the SoC belongs to.
Fixes: d0fb6ba75dc0 ("net: hix5hd2_gmac: add generic compatible string") Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jarno Rajahalme [Tue, 20 Dec 2016 01:06:33 +0000 (17:06 -0800)]
openvswitch: Add a missing break statement.
Add a break statement to prevent fall-through from
OVS_KEY_ATTR_ETHERNET to OVS_KEY_ATTR_TUNNEL. Without the break
actions setting ethernet addresses fail to validate with log messages
complaining about invalid tunnel attributes.
Fixes: 0a6410fbde ("openvswitch: netlink: support L3 packets") Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WingMan Kwok [Mon, 19 Dec 2016 22:55:57 +0000 (17:55 -0500)]
net: netcp: ethss: fix 10gbe host port tx pri map configuration
This patch adds the missing 10gbe host port tx priority map
configurations.
Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WingMan Kwok [Mon, 19 Dec 2016 22:55:56 +0000 (17:55 -0500)]
net: netcp: ethss: fix errors in ethtool ops
In ethtool ops, it needs to retrieve the corresponding
ethss module (gbe or xgbe) from the net_device structure.
Prior to this patch, the retrieving procedure only
checks for the gbe module. This patch fixes the issue
by checking the xgbe module if the net_device structure
does not correspond to the gbe module.
Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 20 Dec 2016 18:55:35 +0000 (13:55 -0500)]
Merge branch 'fsl-fixes'
Madalin Bucur says:
====================
fsl/fman: fixes for ARM
The patch set fixes advertised speeds for QSGMII interfaces, disables A007273 erratum workaround on non-PowerPC platforms where it does not
apply, enables compilation on ARM64 and addresses a probing issue on
non PPC platforms.
Changes from v3: removed redundant comment, added ack by Scott
Changes from v2: merged fsl/fman changes to avoid a point of failure
Changes from v1: unifying probing on all supported platforms
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Reviewed-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Madalin Bucur [Mon, 19 Dec 2016 20:42:44 +0000 (22:42 +0200)]
powerpc: fsl/fman: remove fsl,fman from of_device_ids[]
The fsl/fman drivers will use of_platform_populate() on all
supported platforms. Call of_platform_populate() to probe the
FMan sub-nodes.
Signed-off-by: Igal Liberman <igal.liberman@freescale.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Madalin Bucur [Mon, 19 Dec 2016 20:42:43 +0000 (22:42 +0200)]
fsl/fman: fix 1G support for QSGMII interfaces
QSGMII ports were not advertising 1G speed.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Reviewed-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 20 Dec 2016 18:50:51 +0000 (13:50 -0500)]
Merge branch 'phy-broken-modes'
Jerome Brunet says:
====================
phy: Fix integration of eee-broken-modes
The purpose of this series is to fix the integration of the ethernet phy
property "eee-broken-modes" [0]
The v3 of this series has been merged, missing a fix (error reported by
kbuild robot) available in the v4 [1]
More importantly, Florian opposed adding a DT property mapping a device
register this directly [2]. The concern was that the property could be
abused to implement platform configuration policy. After discussing it,
I think we agreed that such information about the HW (defect) should appear
in the platform DT. However, the preferred way is to add a boolean property
for each EEE broken mode.
jbrunet [Mon, 19 Dec 2016 15:05:38 +0000 (16:05 +0100)]
dt: bindings: net: use boolean dt properties for eee broken modes
The patches regarding eee-broken-modes was merged before all people
involved could find an agreement on the best way to move forward.
While we agreed on having a DT property to mark particular modes as broken,
the value used for eee-broken-modes mapped the phy register in very direct
way. Because of this, the concern is that it could be used to implement
configuration policies instead of describing a broken HW.
In the end, having a boolean property for each mode seems to be preferred
over one bit field value mapping the register (too) directly.
Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
jbrunet [Mon, 19 Dec 2016 15:05:37 +0000 (16:05 +0100)]
net: phy: use boolean dt properties for eee broken modes
The patches regarding eee-broken-modes was merged before all people
involved could find an agreement on the best way to move forward.
While we agreed on having a DT property to mark particular modes as broken,
the value used for eee-broken-modes mapped the phy register in very direct
way. Because of this, the concern is that it could be used to implement
configuration policies instead of describing a broken HW.
In the end, having a boolean property for each mode seems to be preferred
over one bit field value mapping the register (too) directly.
Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
jbrunet [Mon, 19 Dec 2016 15:05:36 +0000 (16:05 +0100)]
net: phy: fix sign type error in genphy_config_eee_advert
In genphy_config_eee_advert, the return value of phy_read_mmd_indirect is
checked to know if the register could be accessed but the result is
assigned to a 'u32'.
Changing to 'int' to correctly get errors from phy_read_mmd_indirect.
Fixes: d853d145ea3e ("net: phy: add an option to disable EEE advertisement") Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Weiner [Tue, 20 Dec 2016 00:23:03 +0000 (16:23 -0800)]
mm: fadvise: avoid expensive remote LRU cache draining after FADV_DONTNEED
When FADV_DONTNEED cannot drop all pages in the range, it observes that
some pages might still be on per-cpu LRU caches after recent
instantiation and so initiates remote calls to all CPUs to flush their
local caches. However, in most cases, the fadvise happens from the same
context that instantiated the pages, and any pre-LRU pages in the
specified range are most likely sitting on the local CPU's LRU cache,
and so in many cases this results in unnecessary remote calls, which, in
a loaded system, can hold up the fadvise() call significantly.
[ I didn't record it in the extreme case we observed at Facebook,
unfortunately. We had a slow-to-respond system and noticed it
lru_add_drain_all() leading the profile during fadvise calls. This
patch came out of thinking about the code and how we commonly call
FADV_DONTNEED.
FWIW, I wrote a silly directory tree walker/searcher that recurses
through /usr to read and FADV_DONTNEED each file it finds. On a 2
socket 40 ht machine, over 1% is spent in lru_add_drain_all(). With
the patch, that cost is gone; the local drain cost shows at 0.09%. ]
Try to avoid the remote call by flushing the local LRU cache before even
attempting to invalidate anything. It's a cheap operation, and the
local LRU cache is the most likely to hold any pre-LRU pages in the
specified fadvise range.
Andreas Steffen [Tue, 20 Dec 2016 00:23:00 +0000 (16:23 -0800)]
ima: platform-independent hash value
For remote attestion it is important for the ima measurement values to
be platform-independent. Therefore integer fields to be hashed must be
converted to canonical format.
Link: http://lkml.kernel.org/r/1480554346-29071-11-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Andreas Steffen <andreas.steffen@strongswan.org> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mimi Zohar [Tue, 20 Dec 2016 00:22:57 +0000 (16:22 -0800)]
ima: define a canonical binary_runtime_measurements list format
The IMA binary_runtime_measurements list is currently in platform native
format.
To allow restoring a measurement list carried across kexec with a
different endianness than the targeted kernel, this patch defines
little-endian as the canonical format. For big endian systems wanting
to save/restore the measurement list from a system with a different
endianness, a new boot command line parameter named "ima_canonical_fmt"
is defined.
Considerations: use of the "ima_canonical_fmt" boot command line option
will break existing userspace applications on big endian systems
expecting the binary_runtime_measurements list to be in platform native
format.
Link: http://lkml.kernel.org/r/1480554346-29071-10-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mimi Zohar [Tue, 20 Dec 2016 00:22:54 +0000 (16:22 -0800)]
ima: support restoring multiple template formats
The configured IMA measurement list template format can be replaced at
runtime on the boot command line, including a custom template format.
This patch adds support for restoring a measuremement list containing
multiple builtin/custom template formats.
Link: http://lkml.kernel.org/r/1480554346-29071-9-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mimi Zohar [Tue, 20 Dec 2016 00:22:51 +0000 (16:22 -0800)]
ima: store the builtin/custom template definitions in a list
The builtin and single custom templates are currently stored in an
array. In preparation for being able to restore a measurement list
containing multiple builtin/custom templates, this patch stores the
builtin and custom templates as a linked list. This will permit
defining more than one custom template per boot.
Link: http://lkml.kernel.org/r/1480554346-29071-8-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mimi Zohar [Tue, 20 Dec 2016 00:22:48 +0000 (16:22 -0800)]
ima: on soft reboot, save the measurement list
The TPM PCRs are only reset on a hard reboot. In order to validate a
TPM's quote after a soft reboot (eg. kexec -e), the IMA measurement
list of the running kernel must be saved and restored on boot.
This patch uses the kexec buffer passing mechanism to pass the
serialized IMA binary_runtime_measurements to the next kernel.
Link: http://lkml.kernel.org/r/1480554346-29071-7-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / karo-tx-linux.git / log