Tejun Heo [Thu, 3 Mar 2016 14:58:01 +0000 (09:58 -0500)]
cgroup: allocate 2x cgrp_cset_links when setting up a new root
During prep, cgroup_setup_root() allocates cgrp_cset_links matching
the number of existing css_sets to later link the new root. This is
fine for now as the only operation which can happen inbetween is
rebind_subsystems() and rebinding of empty subsystems doesn't create
new css_sets.
However, while not yet allowed, with the recent reimplementation,
rebind_subsystems() can rebind subsystems with descendant csses and
thus can create new css_sets. This patch makes cgroup_setup_root()
allocate 2x of the existing css_sets so that later use of live
subsystem rebinding doesn't blow up.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Zefan Li <lizefan@huawei.com>
Tejun Heo [Thu, 3 Mar 2016 14:58:01 +0000 (09:58 -0500)]
cgroup: make cgroup_calc_subtree_ss_mask() take @this_ss_mask
cgroup_calc_subtree_ss_mask() currently takes @cgrp and
@subtree_control. @cgrp is used for two purposes - to decide whether
it's for default hierarchy and the mask of available subsystems. The
former doesn't matter as the results are the same regardless. The
latter can be specified directly through a subsystem mask.
This patch makes cgroup_calc_subtree_ss_mask() perform the same
calculations for both default and legacy hierarchies and take
@this_ss_mask for available subsystems. @cgrp is no longer used and
dropped. This is to allow using the function in contexts where
available controllers can't be decided from the cgroup.
v2: cgroup_refres_subtree_ss_mask() is removed by a previous patch.
Updated accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Zefan Li <lizefan@huawei.com>
Tejun Heo [Thu, 3 Mar 2016 14:58:01 +0000 (09:58 -0500)]
cgroup: reimplement rebind_subsystems() using cgroup_apply_control() and friends
rebind_subsystem() open codes quite a bit of css and interface file
manipulations. It tries to be fail-safe but doesn't quite achieve it.
It can be greatly simplified by using the new css management helpers.
This patch reimplements rebind_subsytsems() using
cgroup_apply_control() and friends.
* The half-baked rollback on file creation failure is dropped. It is
an extremely cold path, failure isn't critical, and, aside from
kernel bugs, the only reason it can fail is memory allocation
failure which pretty much doesn't happen for small allocations.
* As cgroup_apply_control_disable() is now used to clean up root
cgroup on rebind, make sure that it doesn't end up killing root
csses.
* All callers of rebind_subsystems() are updated to use
cgroup_lock_and_drain_offline() as the apply_control functions
require drained subtree.
* This leaves cgroup_refresh_subtree_ss_mask() without any user.
Removed.
* css_populate_dir() and css_clear_dir() no longer needs
@cgrp_override parameter. Dropped.
* While at it, add WARN_ON() to rebind_subsystem() calls which are
expected to always succeed just in case.
While the rules visible to userland aren't changed, this
reimplementation not only simplifies rebind_subsystems() but also
allows it to disable and enable csses recursively. This can be used
to implement more flexible rebinding.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Zefan Li <lizefan@huawei.com>
Tejun Heo [Thu, 3 Mar 2016 14:58:00 +0000 (09:58 -0500)]
cgroup: use cgroup_apply_enable_control() in cgroup creation path
cgroup_create() manually updates control masks and creates child csses
which cgroup_mkdir() then manually populates. Both can be simplified
by using cgroup_apply_enable_control() and friends. The only catch is
that it calls css_populate_dir() with NULL cgroup->kn during
cgroup_create(). This is worked around by making the function noop on
NULL kn.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Zefan Li <lizefan@huawei.com>
Tejun Heo [Thu, 3 Mar 2016 14:58:00 +0000 (09:58 -0500)]
cgroup: combine cgroup_mutex locking and offline css draining
cgroup_drain_offline() is used to wait for csses being offlined to
uninstall itself from cgroup->subsys[] array so that new csses can be
installed. The function's only user, cgroup_subtree_control_write(),
calls it after performing some checks and restarts the whole process
via restart_syscall() if draining has to release cgroup_mutex to wait.
This can be simplified by draining before other synchronized
operations so that there's nothing to restart. This patch converts
cgroup_drain_offline() to cgroup_lock_and_drain_offline() which
performs both locking and draining and updates cgroup_kn_lock_live()
use it instead of cgroup_mutex() if requested. This combined locking
and draining operations are easier to use and less error-prone.
While at it, add WARNs in control_apply functions which triggers if
the subtree isn't properly drained.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Zefan Li <lizefan@huawei.com>
Tejun Heo [Thu, 3 Mar 2016 14:58:00 +0000 (09:58 -0500)]
cgroup: factor out cgroup_{apply|finalize}_control() from cgroup_subtree_control_write()
Factor out cgroup_{apply|finalize}_control() so that control mask
update can be done in several simple steps. This patch doesn't
introduce behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Zefan Li <lizefan@huawei.com>
While controllers are being enabled and disabled in
cgroup_subtree_control_write(), the original subsystem masks are
stashed in local variables so that they can be restored if the
operation fails in the middle.
This patch adds dedicated fields to struct cgroup to be used instead
of the local variables and implements functions to stash the current
values, propagate the changes and restore them recursively. Combined
with the previous changes, this makes subsystem management operations
fully recursive and modularlized. This will be used to expand cgroup
core functionalities.
While at it, remove now unused @css_enable and @css_disable from
cgroup_subtree_control_write().
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Zefan Li <lizefan@huawei.com>
Tejun Heo [Thu, 3 Mar 2016 14:57:59 +0000 (09:57 -0500)]
cgroup: make cgroup_drain_offline() and cgroup_apply_control_{disable|enable}() recursive
The three factored out css management operations -
cgroup_drain_offline() and cgroup_apply_control_{disable|enable}() -
only depend on the current state of the target cgroups and idempotent
and thus can be easily made to operate on the subtree instead of the
immediate children.
This patch introduces the iterators which walk live subtree and
converts the three functions to operate on the subtree including self
instead of the children. While this leads to spurious walking and be
slightly more expensive, it will allow them to be used for wider scope
of operations.
Note that cgroup_drain_offline() now tests for whether a css is dying
before trying to drain it. This is to avoid trying to drain live
csses as there can be mix of live and dying csses in a subtree unlike
children of the same parent.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Zefan Li <lizefan@huawei.com>
Tejun Heo [Thu, 3 Mar 2016 14:57:59 +0000 (09:57 -0500)]
cgroup: factor out cgroup_apply_control_enable() from cgroup_subtree_control_write()
Factor out css enabling and showing into cgroup_apply_control_enable().
* Nest subsystem walk inside child walk. The child walk will later be
converted to subtree walk which is a bit more expensive.
* Instead of operating on the differential masks @css_enable, simply
enable or show csses according to the current cgroup_control() and
cgroup_ss_mask(). This leads to the same result and is simpler and
more robust.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Zefan Li <lizefan@huawei.com>
Tejun Heo [Thu, 3 Mar 2016 14:57:59 +0000 (09:57 -0500)]
cgroup: factor out cgroup_apply_control_disable() from cgroup_subtree_control_write()
Factor out css disabling and hiding into cgroup_apply_control_disable().
* Nest subsystem walk inside child walk. The child walk will later be
converted to subtree walk which is a bit more expensive.
* Instead of operating on the differential masks @css_enable and
@css_disable, simply disable or hide csses according to the current
cgroup_control() and cgroup_ss_mask(). This leads to the same
result and is simpler and more robust.
* This allows error handling path to share the same code.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Zefan Li <lizefan@huawei.com>
Tejun Heo [Thu, 3 Mar 2016 14:57:58 +0000 (09:57 -0500)]
cgroup: introduce cgroup_control() and cgroup_ss_mask()
When a controller is enabled and visible on a non-root cgroup is
determined by subtree_control and subtree_ss_mask of the parent
cgroup. For a root cgroup, by the type of the hierarchy and which
controllers are attached to it. Deciding the above on each usage is
fragile and unnecessarily complicates the users.
This patch introduces cgroup_control() and cgroup_ss_mask() which
calculate and return the [visibly] enabled subsyste mask for the
specified cgroup and conver the existing usages.
* cgroup_e_css() is restructured for simplicity.
* cgroup_calc_subtree_ss_mask() and cgroup_subtree_control_write() no
longer need to distinguish root and non-root cases.
* With cgroup_control(), cgroup_controllers_show() can now handle both
root and non-root cases. cgroup_root_controllers_show() is removed.
v2: cgroup_control() updated to yield the correct result on v1
hierarchies too. cgroup_subtree_control_write() converted.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Zefan Li <lizefan@huawei.com>
Tejun Heo [Thu, 3 Mar 2016 14:57:58 +0000 (09:57 -0500)]
cgroup: factor out cgroup_create() out of cgroup_mkdir()
We're in the process of refactoring cgroup and css management paths to
separate them out to eventually allow cgroups which aren't visible
through cgroup fs. This patch factors out cgroup_create() out of
cgroup_mkdir(). cgroup_create() contains all internal object creation
and initialization. cgroup_mkdir() uses cgroup_create() to create the
internal cgroup and adds interface directory and file creation.
This patch doesn't cause any behavior differences.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Zefan Li <lizefan@huawei.com>
Tejun Heo [Thu, 3 Mar 2016 14:57:58 +0000 (09:57 -0500)]
cgroup: reorder operations in cgroup_mkdir()
Currently, operations to initialize internal objects and create
interface directory and files are intermixed in cgroup_mkdir(). We're
in the process of refactoring cgroup and css management paths to
separate them out to eventually allow cgroups which aren't visible
through cgroup fs.
This patch reorders operations inside cgroup_mkdir() so that interface
directory and file handling comes after internal object
initialization. This will enable further refactoring.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Zefan Li <lizefan@huawei.com>
Tejun Heo [Thu, 3 Mar 2016 14:57:58 +0000 (09:57 -0500)]
cgroup: explicitly track whether a cgroup_subsys_state is visible to userland
Currently, whether a css (cgroup_subsys_state) has its interface files
created is not tracked and assumed to change together with the owning
cgroup's lifecycle. cgroup directory and interface creation is being
separated out from internal object creation to help refactoring and
eventually allow cgroups which are not visible through cgroupfs.
This patch adds CSS_VISIBLE to track whether a css has its interface
files created and perform management operations only when necessary
which helps decoupling interface file handling from internal object
lifecycle. After this patch, all css interface file management
functions can be called regardless of the current state and will
achieve the expected result.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Zefan Li <lizefan@huawei.com>
Tejun Heo [Thu, 3 Mar 2016 14:57:58 +0000 (09:57 -0500)]
cgroup: separate out interface file creation from css creation
Currently, interface files are created when a css is created depending
on whether @visible is set. This patch separates out the two into
separate steps to help code refactoring and eventually allow cgroups
which aren't visible through cgroup fs.
Move css_populate_dir() out of create_css() and drop @visible. While
at it, rename the function to css_create() for consistency.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Zefan Li <lizefan@huawei.com>
Tejun Heo [Thu, 3 Mar 2016 14:57:57 +0000 (09:57 -0500)]
cgroup: suppress spurious de-populated events
During task migration, tasks may transfer between two css_sets which
are associated with the same cgroup. If those tasks are the only
tasks in the cgroup, this currently triggers a spurious de-populated
event on the cgroup.
Fix it by bumping up populated count before bumping it down during
migration to ensure that it doesn't reach zero spuriously.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Zefan Li <lizefan@huawei.com>
Tejun Heo [Thu, 3 Mar 2016 14:57:57 +0000 (09:57 -0500)]
cgroup: re-hash init_css_set after subsystems are initialized
css_sets are hashed by their subsys[] contents and in cgroup_init()
init_css_set is hashed early, before subsystem inits, when all entries
in its subsys[] are NULL, so that cgroup_dfl_root initialization can
find and link to it. As subsystems are initialized,
init_css_set.subsys[] is filled up but the hashing is never updated
making init_css_set hashed in the wrong place. While incorrect, this
doesn't cause a critical failure as css_set management code would
create an identical css_set dynamically.
Fix it by rehashing init_css_set after subsystems are initialized.
While at it, drop unnecessary @key local variable.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Zefan Li <lizefan@huawei.com>
An associated css can be around for quite a while after a cgroup
directory has been removed. In general, it makes sense to reset it to
defaults so as not to worry about any remnants. For instance, memory
cgroup needs to reset memory.low, otherwise pages charged to a dead
cgroup might never get reclaimed. There's ->css_reset callback, which
would fit perfectly for the purpose. Currently, it's only called when a
subsystem is disabled in the unified hierarchy and there are other
subsystems dependant on it. Let's call it on css destruction as well.
Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Xiubo Li [Fri, 26 Feb 2016 05:07:38 +0000 (13:07 +0800)]
cgroup: fix a mistake in warning message
There is a mistake about the print format name:id <--> %d:%s, which
the name is 'char *' type and id is 'int' type. Change "name:id" to
"id:name" instead to be consistent with "cgroup_subsys %d:%s".
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Acked-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Tejun Heo [Tue, 23 Feb 2016 15:00:51 +0000 (10:00 -0500)]
cgroup: use ->subtree_control when testing no internal process rule
No internal process rule is enforced by cgroup_migrate_prepare_dst()
during process migration. It tests whether the target cgroup's
->child_subsys_mask is zero which is different from "subtree_control"
write path which tests ->subtree_control. This hasn't mattered
because up until now, both ->child_subsys_mask and ->subtree_control
are zero or non-zero at the same time. However, with the planned
addition of implicit controllers, this will no longer be true.
This patch prepares for the change by making
cgorup_migrate_prepare_dst() test ->subtree_control instead.
Tejun Heo [Tue, 23 Feb 2016 15:00:51 +0000 (10:00 -0500)]
cgroup: make css_tryget_online_from_dir() also recognize cgroup2 fs
The function currently returns -EBADF for a directory on the default
hierarchy. Make it also recognize cgroup2_fs_type. This will be used
for perf_event cgroup2 support.
Tejun Heo [Tue, 23 Feb 2016 03:25:47 +0000 (22:25 -0500)]
cgroup: make cgroup subsystem masks u16
After the recent do_each_subsys_mask() conversion, there's no reason
to use ulong for subsystem masks. We'll be adding more subsystem
masks to persistent data structures, let's reduce its size to u16
which should be enough for now and the foreseeable future.
This doesn't create any noticeable behavior differences.
v2: Johannes spotted that the initial patch missed cgroup_no_v1_mask.
Converted.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tejun Heo [Tue, 23 Feb 2016 03:25:46 +0000 (22:25 -0500)]
cgroup: convert for_each_subsys_which() to do-while style
for_each_subsys_which() allows iterating subsystems specified in a
subsystem bitmask; unfortunately, it requires the mask to be an
unsigned long l-value which can be inconvenient and makes it awkward
to use a smaller type for subsystem masks.
This patch converts for_each_subsy_which() to do-while style which
allows it to drop the l-value requirement. The new iterator is named
do_each_subsys_mask() / while_each_subsys_mask().
cgroup_subsys->css_e_css_changed() was supposed to be used by cgroup
writeback support; however, the change to per-inode cgroup association
made it unnecessary and the callback doesn't have any user. Remove
it.
Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Johannes Weiner [Thu, 11 Feb 2016 18:34:49 +0000 (13:34 -0500)]
cgroup: provide cgroup_nov1= to disable controllers in v1 mounts
Testing cgroup2 can be painful with system software automatically
mounting and populating all cgroup controllers in v1 mode. Sometimes
they can be unmounted from rc.local, sometimes even that is too late.
Provide a commandline option to disable certain controllers in v1
mounts, so that they remain available for cgroup2 mounts.
Example use:
cgroup_no_v1=memory,cpu
cgroup_no_v1=all
Disabling will be confirmed at boot-time as such:
[ 0.013770] Disabling cpu control group subsystem in v1 mounts
[ 0.016004] Disabling memory control group subsystem in v1 mounts
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Tejun Heo <tj@kernel.org>
Li Bin [Sat, 30 Jan 2016 03:54:03 +0000 (11:54 +0800)]
kernel/Makefile: remove the useless CFLAGS_REMOVE_cgroup-debug.o
The file cgroup-debug.c had been removed from commit fe6934354f8e
(cgroups: move the cgroup debug subsys into cgroup.c to access internal state).
Remain the CFLAGS_REMOVE_cgroup-debug.o = $(CC_FLAGS_FTRACE)
useless in kernel/Makefile.
Signed-off-by: Li Bin <huawei.libin@huawei.com> Acked-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Tejun Heo [Thu, 21 Jan 2016 20:32:15 +0000 (15:32 -0500)]
cgroup: make sure a parent css isn't freed before its children
There are three subsystem callbacks in css shutdown path -
css_offline(), css_released() and css_free(). Except for
css_released(), cgroup core didn't guarantee the order of invocation.
css_offline() or css_free() could be called on a parent css before its
children. This behavior is unexpected and led to bugs in cpu and
memory controller.
The previous patch updated ordering for css_offline() which fixes the
cpu controller issue. While there currently isn't a known bug caused
by misordering of css_free() invocations, let's fix it too for
consistency.
css_free() ordering can be trivially fixed by moving putting of the
parent css below css_free() invocation.
Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org>
Tejun Heo [Thu, 21 Jan 2016 20:31:11 +0000 (15:31 -0500)]
cgroup: make sure a parent css isn't offlined before its children
There are three subsystem callbacks in css shutdown path -
css_offline(), css_released() and css_free(). Except for
css_released(), cgroup core didn't guarantee the order of invocation.
css_offline() or css_free() could be called on a parent css before its
children. This behavior is unexpected and led to bugs in cpu and
memory controller.
This patch updates offline path so that a parent css is never offlined
before its children. Each css keeps online_cnt which reaches zero iff
itself and all its children are offline and offline_css() is invoked
only after online_cnt reaches zero.
This fixes the memory controller bug and allows the fix for cpu
controller.
Tejun Heo [Tue, 19 Jan 2016 17:18:41 +0000 (12:18 -0500)]
cpuset: make mm migration asynchronous
If "cpuset.memory_migrate" is set, when a process is moved from one
cpuset to another with a different memory node mask, pages in used by
the process are migrated to the new set of nodes. This was performed
synchronously in the ->attach() callback, which is synchronized
against process management. Recently, the synchronization was changed
from per-process rwsem to global percpu rwsem for simplicity and
optimization.
Combined with the synchronous mm migration, this led to deadlocks
because mm migration could schedule a work item which may in turn try
to create a new worker blocking on the process management lock held
from cgroup process migration path.
This heavy an operation shouldn't be performed synchronously from that
deep inside cgroup migration in the first place. This patch punts the
actual migration to an ordered workqueue and updates cgroup process
migration and cpuset config update paths to flush the workqueue after
all locks are released. This way, the operations still seem
synchronous to userland without entangling mm migration with process
management synchronization. CPU hotplug can also invoke mm migration
but there's no reason for it to wait for mm migrations and thus
doesn't synchronize against their completions.
Linus Torvalds [Fri, 22 Jan 2016 03:58:02 +0000 (19:58 -0800)]
Merge branch 'for-4.5/nvme' of git://git.kernel.dk/linux-block
Pull NVMe updates from Jens Axboe:
"Last branch for this series is the nvme changes. It's in a separate
branch to avoid splitting too much between core and NVMe changes,
since NVMe is still helping drive some blk-mq changes. That said, not
a huge amount of core changes in here. The grunt of the work is the
continued split of the code"
* 'for-4.5/nvme' of git://git.kernel.dk/linux-block: (67 commits)
uapi: update install list after nvme.h rename
NVMe: Export NVMe attributes to sysfs group
NVMe: Shutdown controller only for power-off
NVMe: IO queue deletion re-write
NVMe: Remove queue freezing on resets
NVMe: Use a retryable error code on reset
NVMe: Fix admin queue ring wrap
nvme: make SG_IO support optional
nvme: fixes for NVME_IOCTL_IO_CMD on the char device
nvme: synchronize access to ctrl->namespaces
nvme: Move nvme_freeze/unfreeze_queues to nvme core
PCI/AER: include header file
NVMe: Export namespace attributes to sysfs
NVMe: Add pci error handlers
block: remove REQ_NO_TIMEOUT flag
nvme: merge iod and cmd_info
nvme: meta_sg doesn't have to be an array
nvme: properly free resources for cancelled command
nvme: simplify completion handling
nvme: special case AEN requests
...
Linus Torvalds [Fri, 22 Jan 2016 03:01:55 +0000 (19:01 -0800)]
Merge branch 'for-4.5/lightnvm' of git://git.kernel.dk/linux-block
Pull lightnvm fixes and updates from Jens Axboe:
"This should have been part of the drivers branch, but it arrived a bit
late and wasn't based on the official core block driver branch. So
they got a small scolding, but got a pass since it's still new. Hence
it's in a separate branch.
This is mostly pure fixes, contained to lightnvm/, and minor feature
additions"
* 'for-4.5/lightnvm' of git://git.kernel.dk/linux-block: (26 commits)
lightnvm: ensure that nvm_dev_ops can be used without CONFIG_NVM
lightnvm: introduce factory reset
lightnvm: use system block for mm initialization
lightnvm: introduce ioctl to initialize device
lightnvm: core on-disk initialization
lightnvm: introduce mlc lower page table mappings
lightnvm: add mccap support
lightnvm: manage open and closed blocks separately
lightnvm: fix missing grown bad block type
lightnvm: reference rrpc lun in rrpc block
lightnvm: introduce nvm_submit_ppa
lightnvm: move rq->error to nvm_rq->error
lightnvm: support multiple ppas in nvm_erase_ppa
lightnvm: move the pages per block check out of the loop
lightnvm: sectors first in ppa list
lightnvm: fix locking and mempool in rrpc_lun_gc
lightnvm: put block back to gc list on its reclaim fail
lightnvm: check bi_error in gc
lightnvm: return the get_bb_tbl return value
lightnvm: refactor end_io functions for sync
...
Linus Torvalds [Fri, 22 Jan 2016 02:19:38 +0000 (18:19 -0800)]
Merge branch 'for-4.5/drivers' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"This is the block driver pull request for 4.5, with the exception of
NVMe, which is in a separate branch and will be posted after this one.
This pull request contains:
- A set of bcache stability fixes, which have been acked by Kent.
These have been used and tested for more than a year by the
community, so it's about time that they got in.
- A set of drbd updates from the drbd team (Andreas, Lars, Philipp)
and Markus Elfring, Oleg Drokin.
- A set of fixes for xen blkback/front from the usual suspects, (Bob,
Konrad) as well as community based fixes from Kiri, Julien, and
Peng.
- A 2038 time fix for sx8 from Shraddha, with a fix from me.
- A small mtip32xx cleanup from Zhu Yanjun.
- A null_blk division fix from Arnd"
* 'for-4.5/drivers' of git://git.kernel.dk/linux-block: (71 commits)
null_blk: use sector_div instead of do_div
mtip32xx: restrict variables visible in current code module
xen/blkfront: Fix crash if backend doesn't follow the right states.
xen/blkback: Fix two memory leaks.
xen/blkback: make st_ statistics per ring
xen/blkfront: Handle non-indirect grant with 64KB pages
xen-blkfront: Introduce blkif_ring_get_request
xen-blkback: clear PF_NOFREEZE for xen_blkif_schedule()
xen/blkback: Free resources if connect_ring failed.
xen/blocks: Return -EXX instead of -1
xen/blkback: make pool of persistent grants and free pages per-queue
xen/blkback: get the number of hardware queues/rings from blkfront
xen/blkback: pseudo support for multi hardware queues/rings
xen/blkback: separate ring information out of struct xen_blkif
xen/blkfront: correct setting for xen_blkif_max_ring_order
xen/blkfront: make persistent grants pool per-queue
xen/blkfront: Remove duplicate setting of ->xbdev.
xen/blkfront: Cleanup of comments, fix unaligned variables, and syntax errors.
xen/blkfront: negotiate number of queues/rings to be used with backend
xen/blkfront: split per device io_lock
...
Linus Torvalds [Thu, 21 Jan 2016 21:02:41 +0000 (13:02 -0800)]
Merge branch 'uaccess' (batched user access infrastructure)
Expose an interface to allow users to mark several accesses together as
being user space accesses, allowing batching of the surrounding user
space access markers (SMAP on x86, PAN on arm64, domain register
switching on arm).
This is currently only used for the user string lenth and copying
functions, where the SMAP overhead on x86 drowned the actual user
accesses (only noticeable on newer microarchitectures that support SMAP
in the first place, of course).
* user access batching branch:
Use the new batched user accesses in generic user string handling
Add 'unsafe' user access functions for batched accesses
x86: reorganize SMAP handling in user space accesses
- more dma-mapping cleanups/simplifications from hch"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits)
MAINTAINERS: add/fix git URLs for various subsystems
mm: memcontrol: add "sock" to cgroup2 memory.stat
mm: memcontrol: basic memory statistics in cgroup2 memory controller
mm: memcontrol: do not uncharge old page in page cache replacement
Documentation: cgroup: add memory.swap.{current,max} description
mm: free swap cache aggressively if memcg swap is full
mm: vmscan: do not scan anon pages if memcg swap limit is hit
swap.h: move memcg related stuff to the end of the file
mm: memcontrol: replace mem_cgroup_lruvec_online with mem_cgroup_online
mm: vmscan: pass memcg to get_scan_count()
mm: memcontrol: charge swap to cgroup2
mm: memcontrol: clean up alloc, online, offline, free functions
mm: memcontrol: flatten struct cg_proto
mm: memcontrol: rein in the CONFIG space madness
net: drop tcp_memcontrol.c
mm: memcontrol: introduce CONFIG_MEMCG_LEGACY_KMEM
mm: memcontrol: allow to disable kmem accounting for cgroup2
mm: memcontrol: account "kmem" consumers in cgroup2 memory controller
mm: memcontrol: move kmem accounting code to CONFIG_MEMCG
mm: memcontrol: separate kmem code from legacy tcp accounting code
...
Linus Torvalds [Thu, 21 Jan 2016 20:20:46 +0000 (12:20 -0800)]
Merge branch 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
"This contains several bug fixes and a new mount option
'default_permissions' that allows read-only exported NFS
filesystems to be used as lower layer"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: check dentry positiveness in ovl_cleanup_whiteouts()
ovl: setattr: check permissions before copy-up
ovl: root: copy attr
ovl: move super block magic number to magic.h
ovl: use a minimal buffer in ovl_copy_xattr
ovl: allow zero size xattr
ovl: default permissions
Linus Torvalds [Thu, 21 Jan 2016 19:52:16 +0000 (11:52 -0800)]
Merge tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"PCI changes for the v4.5 merge window:
Enumeration:
- Simplify config space size computation (Bjorn Helgaas)
- Avoid iterating through ROM outside the resource window (Edward O'Callaghan)
- Support PCIe devices with short cfg_size (Jason S. McMullan)
- Add Netronome vendor and device IDs (Jason S. McMullan)
- Limit config space size for Netronome NFP6000 family (Jason S. McMullan)
- Add Netronome NFP4000 PF device ID (Simon Horman)
- Limit config space size for Netronome NFP4000 (Simon Horman)
- Print warnings for all invalid expansion ROM headers (Vladis Dronov)
Linus Torvalds [Thu, 21 Jan 2016 19:45:02 +0000 (11:45 -0800)]
Merge tag 'pwm/for-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This set of changes contains a new driver for OMAP (using the
dual-mode timers) as well as an assortment of fixes all across the
board"
* tag 'pwm/for-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Mark all devices as "might sleep"
pwm: omap-dmtimer: Potential NULL dereference on error
pwm: add HAS_IOMEM dependency to PWM_FSL_FTM
pwm: Add PWM driver for OMAP using dual-mode timers
pwm: rcar: Improve accuracy of frequency division setting
pwm: lpc32xx: return ERANGE, if requested period is not supported
pwm: lpc32xx: fix and simplify duty cycle and period calculations
pwm: lpc32xx: make device usable with common clock framework
pwm: lpc32xx: correct number of PWM channels from 2 to 1
dt: lpc32xx: pwm: update documentation of LPC32xx PWM device
dt: lpc32xx: pwm: correct LPC32xx PWM device node example
pwm: fsl-ftm: Fix clock enable/disable when using PM
pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE
pwm: lpss: Select core part automatically
pwm: lpss: Update PWM setting for Broxton
pwm: bcm2835: Fix email address specification
pwm: bcm2835: Prevent division by zero
pwm: bcm2835: Calculate scaler in ->config()
pwm: lpss: Remove ->free() callback
Thierry Reding [Thu, 21 Jan 2016 14:04:59 +0000 (15:04 +0100)]
pwm: Mark all devices as "might sleep"
Commit d1cd21427747 ("pwm: Set enable state properly on failed call to
enable") introduced a mutex that is needed to protect internal state of
PWM devices. Since that mutex is acquired in pwm_set_polarity() and in
pwm_enable() and might potentially block, all PWM devices effectively
become "might sleep".
It's rather pointless to keep the .can_sleep field around, but given
that there are external users let's postpone the removal for the next
release cycle.
Linus Torvalds [Thu, 21 Jan 2016 03:06:49 +0000 (19:06 -0800)]
Merge tag 'pm+acpi-4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management and ACPI updates from Rafael Wysocki:
"This includes fixes on top of the previous batch of PM+ACPI updates
and some new material as well.
From the new material perspective the most significant are the driver
core changes that should allow USB devices to stay suspended over
system suspend/resume cycles if they have been runtime-suspended
already beforehand. Apart from that, ACPICA is updated to upstream
revision 20160108 (cosmetic mostly, but including one fixup on top of
the previous ACPICA update) and there are some devfreq updates the
didn't make it before (due to timing).
A few recent regressions are fixed, most importantly in the cpuidle
menu governor and in the ACPI backlight driver and some x86 platform
drivers depending on it.
Some more bugs are fixed and cleanups are made on top of that.
Specifics:
- Modify the driver core and the USB subsystem to allow USB devices
to stay suspended over system suspend/resume cycles if they have
been runtime-suspended already beforehand and fix some bugs on top
of these changes (Tomeu Vizoso, Rafael Wysocki).
- Update ACPICA to upstream revision 20160108, including updates of
the ACPICA's copyright notices, a code fixup resulting from a
regression fix that was necessary in the upstream code only (the
regression fixed by it has never been present in Linux) and a
compiler warning fix (Bob Moore, Lv Zheng).
- Fix a recent regression in the cpuidle menu governor that broke it
on practically all architectures other than x86 and make a couple
of optimizations on top of that fix (Rafael Wysocki).
- Clean up the selection of cpuidle governors depending on whether or
not the kernel is configured for tickless systems (Jean Delvare).
- Revert a recent commit that introduced a regression in the ACPI
backlight driver, address the problem it attempted to fix in a
different way and revert one more cosmetic change depending on the
problematic commit (Hans de Goede).
- Add two more ACPI backlight quirks (Hans de Goede).
- Fix a few minor problems in the core devfreq code, clean it up a
bit and update the MAINTAINERS information related to it (Chanwoo
Choi, MyungJoo Ham).
- Improve an error message in the ACPI fan driver (Andy Lutomirski).
- Fix a recent build regression in the cpupower tool (Shreyas
Prabhu)"
* tag 'pm+acpi-4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
cpuidle: menu: Avoid pointless checks in menu_select()
sched / idle: Drop default_idle_call() fallback from call_cpuidle()
cpupower: Fix build error in cpufreq-info
cpuidle: Don't enable all governors by default
cpuidle: Default to ladder governor on ticking systems
time: nohz: Expose tick_nohz_enabled
ACPICA: Update version to 20160108
ACPICA: Silence a -Wbad-function-cast warning when acpi_uintptr_t is 'uintptr_t'
ACPICA: Additional 2016 copyright changes
ACPICA: Reduce regression fix divergence from upstream ACPICA
ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite R830
ACPI / video: Revert "thinkpad_acpi: Use acpi_video_handles_brightness_key_presses()"
ACPI / video: Document acpi_video_handles_brightness_key_presses() a bit
ACPI / video: Fix using an uninitialized mutex / list_head in acpi_video_handles_brightness_key_presses()
ACPI / video: Revert "ACPI / video: driver must be registered before checking for keypresses"
ACPI / fan: Improve acpi_device_update_power error message
ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700
cpuidle: menu: Fix menu_select() for CPUIDLE_DRIVER_STATE_START == 0
MAINTAINERS: Add devfreq-event entry
MAINTAINERS: Add missing git repository and directory for devfreq
...
Linus Torvalds [Thu, 21 Jan 2016 03:00:46 +0000 (19:00 -0800)]
Merge tag 'renesas-sh-drivers-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas
Pull SH driver updates from Simon Horman:
"Clean up the clock API on legacy SH to make it more similar to the
Common Clock Framework. This will avoid different behaviour in
drivers shared between legacy and CCF-based platforms (e.g. SCIF)"
* tag 'renesas-sh-drivers-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
drivers: sh: clk: Avoid crashes when passing NULL clocks
drivers: sh: clk: Remove obsolete and unused clk_round_parent()
Linus Torvalds [Thu, 21 Jan 2016 02:42:30 +0000 (18:42 -0800)]
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Driver updates for ARM SoCs. Some for SoC-family code under
drivers/soc, but also some other driver updates that don't belong
anywhere else. We also bring in the drivers/reset code through
arm-soc.
Some of the larger updates:
- Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate
with other parts of the chip/board on these platforms, all
proprietary protocols that don't fit into other subsystems and live
in drivers/soc for now.
- System bus driver for UniPhier
- Driver for the TI Wakeup M3 IPC device
- Power management for Raspberry PI
+ Again a bunch of other smaller updates and patches"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
bus: uniphier: allow only built-in driver
ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency
MAINTAINERS: Drop Kumar Gala from QCOM
bus: uniphier-system-bus: add UniPhier System Bus driver
ARM: bcm2835: add rpi power domain driver
dt-bindings: add rpi power domain driver bindings
ARM: bcm2835: Define two new packets from the latest firmware.
drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular
soc: mediatek: SCPSYS: Add regulator support
MAINTAINERS: Change QCOM entries
soc: qcom: smd-rpm: Add existing platform support
memory/tegra: Add number of TLB lines for Tegra124
reset: hi6220: fix modular build
soc: qcom: Introduce WCNSS_CTRL SMD client
ARM: qcom: select ARM_CPU_SUSPEND for power management
MAINTAINERS: Add rules for Qualcomm dts files
soc: qcom: enable smsm/smp2p modular build
serial: msm_serial: Make config tristate
soc: qcom: smp2p: Qualcomm Shared Memory Point to Point
soc: qcom: smsm: Add driver for Qualcomm SMSM
...
Linus Torvalds [Thu, 21 Jan 2016 02:35:00 +0000 (18:35 -0800)]
Merge tag 'armsoc-defconfig64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 64-bit defconfig updates from Olof Johansson:
"As mentioned earlier, we usually bake this into the general "arm64"
branch, but this release we have partitioned up the updates a bit
more.
Most of these updates are enabling new SoCs in the single defconfig
for 64-bit, Renesas R8A7795, a number of Tegra options, Socionext
Uniphier and a handful of new options for other platforms as well"
* tag 'armsoc-defconfig64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: mediatek: enable MTK_TIMER
arm64: defconfig: add CS2000 support
arm64: defconfig: Add Renesas R-Car SATA driver for R-Car Gen3 SoCs
arm64: defconfig: enable UniPhier SoCs support
arm64: add Kconfig entry for Socionext UniPhier SoC family
arm64: defconfig: add Renesas sound and AK4613 support
arm64: defconfig: add Renesas R-Car DMAC driver support
arm64: defconfig: Enable Renesas R-Car I2C Controller
arm64: defconfig: enable EthernetAVB
arm64: defconfig: Enable GPIO of Renesas R-Car Gen3 SoC
arm64: berlin: add the pinctrl dependency for Marvell Berlin SoCs
arm64: defconfig: renesas: Enable Renesas r8a7795 SoC
arm64: defconfig: Enable printk timestamps
arm64: defconfig: Enable squashfs support
arm64: defconfig: Enable sdhci-tegra driver
arm64: defconfig: Enable serial-tegra driver
arm64: defconfig: Enable tegra-apbdma driver
arm64: defconfig: Do not disable Tegra AHB driver
arm64: defconfig: Enable Tegra210 support
Linus Torvalds [Thu, 21 Jan 2016 02:29:13 +0000 (18:29 -0800)]
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"As usual, a bunch of commits, mostly adding drivers and other options
to defconfigs because it makes sense to have them enabled on various
development or product boards. Too much to enumerate each here.
There's an introduction of a pxa_defconfig, since PXA finally will
allow building a shared kernel for all boards. With this, we can
hopefully remove a bunch of individual defconfigs down the road but it
requires a bit of real life testing and transition period"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (65 commits)
ARM: Add CONFIG_DEPRECATED_PARAM_STRUCT to netwinder_defconfig
ARM: multi_v7_defconfig: Add rockchip audio support
arm: multi_v7_defconfig: Add virtio drivers
ARM: zx_defconfig: remove CONFIG_MMC_DW_IDMAC
ARM: versatile: enable the right LEDs
ARM: pxa: add defconfig covering all the boards
ARM: versatile: select some defaults in defconfig
ARM: multi_v7_defconfig: Enable fan, sensors and audio for Odroid XU3
ARM: bcm2835: enable auxiliary spi driver in defconfig
ARM: bcm2835: enable all bcm2835-relevant in defconfig
ARM: default to multi_v7_defconfig
ARM: multi_v7_defconfig: enable rk808 clkout module
ARM: multi_v7_defconfig: enable rockchip crypto module
ARM: multi_v7_defconfig: enable Rockchip io-domain driver
ARM: multi_v7_defconfig: Enable generic SoC internal OMAP regulators
ARM: multi_v7_defconfig: Enable AM437x PMIC TPS65218
ARM: multi_v7_defconfig: enable TPS65217 regulator
ARM: realview: select apropriate targets
ARM: defconfig: qcom: Enable SSBI drivers
ARM: defconfig: Update qcom_defconfig
...
Linus Torvalds [Thu, 21 Jan 2016 02:21:32 +0000 (18:21 -0800)]
Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 64-bit DT updates from Olof Johansson:
"This is the first release where we split up the 64-bit contributions a
bit more, and in particular we are having a separate DT branch for
them.
Contents:
- New devices added to Broadcom NorthStar2
- Misc fixes for Exynos7 boards
- QCOM updates for MSM8916
- Rockchip tweaks for rk3368 SoC and eval board
- A series of fixes for APM X-Gene v1 and v2
- Renesas R8A7795 CPU/PSCI additions
- Marvell Berlin4CT PSCI, cpuidle, watchdog portions
- Freescale LS1043a SoC and dev board support
+ some treewide or other misc changes"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits)
dts/ls2080a: Update DTSI to add support of SP805 WDT
Documentation: DT: Add entry for ARM SP805-WDT
arm64: dts: X-Gene v2: I2C1 clock is always on
arm64: dts: X-Gene v1: I2C0 clock is always on
arm64: dts: Fix to use standard DT node names for X-Gene 1 and X-Gene 2 platforms
arm64: dts: hikey: add label properties to UARTs
arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPI
arm64: dts: apq8016-sbc: enable UART0 on LS connector
arm64: dts: juno: Add idle-states to device tree
arm64: dts: Added syscon-reboot node for FSL's LS2080A SoC
arm64: dts: add LS1043a-RDB board support
arm64: dts: add Freescale LS1043a SoC support
Documentation: DT: Add entry for Freescale LS1043a-RDB board
arm64: dts: uniphier: add PH1-LD10 SoC/board support
arm64: renesas: r8a7795: fix SATA clock assignment
arm64: dts: salvator-x: Enable SATA controller
arm64: dts: r8a7795: Add SATA controller node
arm64: renesas: r8a7795: add internal delay for i2c IPs
arm64: renesas: salvator-x: Add board part number to DT bindings
arm64: dts: r8a7795: Add pmu device nodes
...
Linus Torvalds [Thu, 21 Jan 2016 02:16:29 +0000 (18:16 -0800)]
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM DT updates from Olof Johansson:
"As usual, the bulk of this release is again DT file contents.
There's a huge number of changes here, and it's challenging to give a
crisp overview of just what is in here. To start with:
New boards:
- TI-based DM3730 from LogicPD (Torpedo)
- Cosmic+ M4 (nommu) initial support (Freescale Vybrid)
- Raspberry Pi 2 DT files
- Watchdog on Meson8b
- Veyron-mickey (ASUS Chromebit) DTS
- Rockchip rk3228 SoC and eval board
- Sigma Designs Tango4
Improvements:
- Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files
- Misc new devices for Rockchip rk3036 and rk3288
- Allwinner updates for misc SoCs and systems
... and a _large_ number of other changes across the field. Devices
added to SoC DTSI and board DTS files for a number of SoC vendors, new
product boards on already-supported SoCs, cleanups and refactorings of
existing DTS/DTSI files and a bunch of other changes"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (469 commits)
ARM: dts: compulab: add new board description
ARM: versatile: add the syscon LEDs to the DT
dts: vt8500: Fix errors in SDHC node for WM8505
ARM: dts: imx6q: clean up unused ipu2grp
ARM: dts: silk: Add compatible property to "partitions" node
ARM: dts: gose: Add compatible property to "partitions" node
ARM: dts: porter: Add compatible property to "partitions" node
ARM: dts: koelsch: Add compatible property to "partitions" node
ARM: dts: lager: Add compatible property to "partitions" node
ARM: dts: bockw: Add compatible property to "partitions" node
ARM: dts: meson8b: Add watchdog node
Documentation: watchdog: Add new bindings for meson8b
ARM: meson: Add status LED for Odroid-C1
ARM: dts: uniphier: fix a typo in comment block
ARM: bcm2835: Add the auxiliary clocks to the device tree.
ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B
ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT.
ARM: bcm2835: Split the DT for peripherals from the DT for the CPU
ARM: realview: set up cache correctly on the PB11MPCore
ARM: dts: Unify G2D device node with other devices on exynos4
...
Linus Torvalds [Thu, 21 Jan 2016 02:10:05 +0000 (18:10 -0800)]
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"Updates for new platform support:
- New platform: Tango4 from Sigma Designs.
- Broadcom BCM2836 (Raspberry Pi 2 SoC)
- Enable cpufreq on Freescale i.MX7D
- Rockchip: SMP support for rk3036, general support for rk3228
- SMP support on Broadcom Kona and NSP
- Cleanups for OMAP removing legacy IOMMU data
+ a bunch of misc fixes and tweaks for various platforms"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits)
ARM: tango: Fix UP build issues
ARM: tango: pass ARM arch level for smc.S
ARM: bcm2835: Add Kconfig support for bcm2836
ARM: OMAP2+: Add support for dm814x and dra62x usb
ARM: OMAP2+: Add mmc hwmod entries for dm814x
ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx
ARM: OMAP2+: Fix SoC detection for dra62x j5-eco
ARM: tango4: Initial platform support
ARM: bcm2835: Add a compat string for bcm2836 machine probe
dt-bindings: Add root properties for Raspberry Pi 2
ARM: imx: select SRC for i.MX7
ARM: uniphier: select PINCTRL
ARM: OMAP2+: Remove device creation for omap-pcm-audio
ARM: OMAP1: Remove device creation for omap-pcm-audio
ARM: rockchip: enable support for RK3228 SoCs
ARM: rockchip: use const and __initconst for rk3036 smp_operations
ARM: zynq: Select ARCH_HAS_RESET_CONTROLLER
ARM: BCM: Add SMP support for Broadcom 4708
ARM: BCM: Add SMP support for Broadcom NSP
ARM: BCM: Clean up SMP support for Broadcom Kona
...
Linus Torvalds [Thu, 21 Jan 2016 02:03:56 +0000 (18:03 -0800)]
Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC multiplatform code updates from Arnd Bergmann:
"This branch is the culmination of 5 years of effort to bring the ARMv6
and ARMv7 platforms together such that they can all be enabled and
boot the same kernel. It has been a tremendous amount of cleanup and
refactoring by a huge number of people, and creation of several new
(and major) subsystems to better abstract out all the platform details
in an appropriate manner.
The bulk of this branch is a large patchset from Arnd that brings
several of the more minor and older platforms we have closer to
multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0
and realview Much of this is moving around header files from old mach
directories, but there are also some cleanup patches of debug_ll
(lowlevel debug per-platform options) and other parts.
Linus Walleij also has some patchs to clean up the older ARM Realview
platforms by finally introducing DT support, and Rob Herring has some
for ARM Versatile which is now DT-only. Both of these platforms are
now multiplatform.
Finally, a couple of patches from Russell for Dove PMU, and a fix from
Valentin Rothberg for Exynos ADC, which were rebased on top of the
series to avoid conflicts"
* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
ARM: realview: don't select SMP_ON_UP for UP builds
ARM: s3c: simplify s3c_irqwake_{e,}intallow definition
ARM: s3c64xx: fix pm-debug compilation
iio: exynos-adc: fix irqf_oneshot.cocci warnings
ARM: realview: build realview-dt SMP support only when used
ARM: realview: select apropriate targets
ARM: realview: clean up header files
ARM: realview: make all header files local
ARM: no longer make CPU targets visible separately
ARM: integrator: use explicit core module options
ARM: realview: enable multiplatform
ARM: make default platform work for NOMMU
ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location
ARM: defconfig: use correct debug_ll settings
ARM: versatile: convert to multi-platform
ARM: versatile: merge mach code into a single file
ARM: versatile: switch to DT only booting and remove legacy code
ARM: versatile: add DT based PCI detection
ARM: pxa: mark ezx structures as __maybe_unused
ARM: pxa: mark raumfeld init functions as __maybe_unused
...
Linus Torvalds [Thu, 21 Jan 2016 01:55:20 +0000 (17:55 -0800)]
Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"A smallish number of general cleanup commits this release cycle. Some
of these are minor tweaks:
- shmobile change of binding for their GIC (using arm,pl390 now)
- ARCH_RENESAS introduction
- Misc other renesas updates
There's also a couple of treewide commits from Masahiro Yamada
cleaning up const/__initconst for SMP operation structs and a switch
to using "depends on" instead of if-constructs on most of the Kconfig
platform targets"
* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
staging: board: armadillo800eva: Use "arm,pl390"
staging: board: kzm9d: Use "arm,pl390"
ARM: shmobile: r8a7778 dtsi: Use "arm,pl390" for GIC
ARM: shmobile: emev2 dtsi: Use "arm,pl390" for GIC
ARM: shmobile: r8a7740 dtsi: Use "arm,pl390" for GIC
ARM: shmobile: r7s72100 dtsi: Use "arm,pl390" for GIC
ARM: use "depends on" for SoC configs instead of "if" after prompt
ARM/clocksource: use automatic DT probing for ux500 PRCMU
ARM: use const and __initconst for smp_operations
ARM: hisi: do not export smp_operations structures
ARM: mvebu: remove unused mach/gpio.h
ARM: shmobile: Remove legacy mach/irqs.h
ARM: shmobile: Introduce ARCH_RENESAS
MAINTAINERS: Remove link to oss.renesas.com which is closed
Linus Torvalds [Thu, 21 Jan 2016 01:44:16 +0000 (17:44 -0800)]
Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull non-urgent ARM SoC fixes from Olof Johansson:
"As usual, we queue up a few fixes that don't seem urgent enough to go
in through -rc.
- MAINTAINERS updates to add a list for brcmstb and fix a typo
- A handful of fixes for OMAP 81xx, a recently resurrected platform
so these can't be considered real regressions and thus got queued.
- A couple of other small fixes for scoop, sa1100 and davinci"
* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP2+: Fix randconfig build warning for dm814_pllss_data
ARM: sa1100/simpad: Be sure to clamp return value
ARM: scoop: Be sure to clamp return value
ARM: davinci: fix a problematic usage of WARN()
ARM: davinci: only select WT cache if cache is enabled
ARM: OMAP2+: Remove useless check for legacy booting for dm814x
ARM: OMAP2+: Enable GPIO for dm814x
ARM: dts: Fix dm814x pinctrl address and mask
ARM: dts: Fix dm8148 control modules ranges
ARM: OMAP2+: Fix timer entries for dm814x
ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting
ARM: OMAP2+: Add DPPLS clock manager for dm814x
clk: ti: Add few dm814x clock aliases
ARM: dts: Fix dm814x entries for pllss and prcm
MAINTAINERS: gpio-brcmstb: Remove stray '>'
MAINTAINERS: brcmstb: Include Broadcom internal mailing-list
Linus Torvalds [Thu, 21 Jan 2016 01:30:20 +0000 (17:30 -0800)]
Merge tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The asm-generic tree this time contains one series from Nicolas Pitre
that makes the optimized do_div() implementation from the ARM
architecture available to all architectures.
This also adds stricter type checking for callers of do_div, which has
uncovered a number of bugs in existing code, and fixes up the ones we
have found"
* tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
ARM: asm/div64.h: adjust to generic codde
__div64_32(): make it overridable at compile time
__div64_const32(): abstract out the actual 128-bit cross product code
do_div(): generic optimization for constant divisor on 32-bit machines
div64.h: optimize do_div() for power-of-two constant divisors
mtd/sm_ftl.c: fix wrong do_div() usage
drm/mgag200/mgag200_mode.c: fix wrong do_div() usage
hid-sensor-hub.c: fix wrong do_div() usage
ti/fapll: fix wrong do_div() usage
ti/clkt_dpll: fix wrong do_div() usage
tegra/clk-divider: fix wrong do_div() usage
imx/clk-pllv2: fix wrong do_div() usage
imx/clk-pllv1: fix wrong do_div() usage
nouveau/nvkm/subdev/clk/gk20a.c: fix wrong do_div() usage
Linus Torvalds [Thu, 21 Jan 2016 01:20:53 +0000 (17:20 -0800)]
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
"The highlights this round include:
- Introduce configfs support for unlocked configfs_depend_item()
(krzysztof + andrezej)
- Conversion of usb-gadget target driver to new function registration
interface (andrzej + sebastian)
- Enable qla2xxx FC target mode support for Extended Logins (himansu +
giridhar)
- Enable qla2xxx FC target mode support for Exchange Offload (himansu +
giridhar)
- Add qla2xxx FC target mode irq affinity notification + selective
command queuing. (quinn + himanshu)
- Fix iscsi-target deadlock in se_node_acl configfs deletion (sagi +
nab)
- Convert se_node_acl configfs deletion + se_node_acl->queue_depth to
proper se_session->sess_kref + target_get_session() usage. (hch +
sagi + nab)
- Fix long-standing race between se_node_acl->acl_kref get and
get_initiator_node_acl() lookup. (hch + nab)
- Fix target/user block-size handling, and make sure netlink reaches
all network namespaces (sheng + andy)
Note there is an outstanding bug-fix series for remote I_T nexus port
TMR LUN_RESET has been posted and still being tested, and will likely
become post -rc1 material at this point"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (56 commits)
scsi: qla2xxxx: avoid type mismatch in comparison
target/user: Make sure netlink would reach all network namespaces
target: Obtain se_node_acl->acl_kref during get_initiator_node_acl
target: Convert ACL change queue_depth se_session reference usage
iscsi-target: Fix potential dead-lock during node acl delete
ib_srpt: Convert acl lookup to modern get_initiator_node_acl usage
tcm_fc: Convert acl lookup to modern get_initiator_node_acl usage
tcm_fc: Wait for command completion before freeing a session
target: Fix a memory leak in target_dev_lba_map_store()
target: Support aborting tasks with a 64-bit tag
usb/gadget: Remove set-but-not-used variables
target: Remove an unused variable
target: Fix indentation in target_core_configfs.c
target/user: Allow user to set block size before enabling device
iser-target: Fix non negative ERR_PTR isert_device_get usage
target/fcoe: Add tag support to tcm_fc
qla2xxx: Check for online flag instead of active reset when transmitting responses
qla2xxx: Set all queues to 4k
qla2xxx: Disable ZIO at start time.
qla2xxx: Move atioq to a different lock to reduce lock contention
...
Fengguang Wu [Wed, 20 Jan 2016 23:03:25 +0000 (15:03 -0800)]
MAINTAINERS: add/fix git URLs for various subsystems
Add/fix git URLs for various subsystems
Add git URL for at91
Add git URL for Rockchip
Add git URL for ARM64
Update git URL for ath6kl
Add git URL for backlight
Add git URL for chrome
Add git URL for cris
Add git URL for cryptodev
Update git URL for DLM
Add git URL for eCryptfs
Add git URL for ext4
Add git URL for hwspinlock
Add git URL for integrity
Add git URL for IPVS
Add git URL for nfsd
Add git URL for KVM/s390
Add git URL for kgdb
Add git URL for nvdimm
Add git URL for metag
Add git URL for wireless drivers
Add git URL for devicetree
Update git URL for PCMCIA
Update git URL for pstore
Update git URL for ath10k
Add git URL for hexagon
Add git URL for reset
Add git URL for s390
Fix tree format for SAMSUNG thermal
Add git URL for md
Add git URL for squashfs
Add git URL for swiotlb
Add git URL for xtensa
Fix tree format for TPM
Add git URL for UML
Add git URL for VFIO
Add git URL for vhost
Update git URL for XFS
Fix MIC maintainers entry
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: James Hogan <james.hogan@imgtec.com> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Wed, 20 Jan 2016 23:03:16 +0000 (15:03 -0800)]
mm: memcontrol: do not uncharge old page in page cache replacement
Changing page->mem_cgroup of a live page is tricky and fragile. In
particular, the memcg writeback code relies on that mapping being stable
and users of mem_cgroup_replace_page() not overlapping with dirtyable
inodes.
Page cache replacement doesn't have to do that, though. Instead of being
clever and transferring the charge from the old page to the new,
force-charge the new page and leave the old page alone. A temporary
overcharge won't matter in practice, and the old page is going to be freed
shortly after this anyway. And this is not performance critical.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The rationale of separate swap counter is given by Johannes Weiner.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Wed, 20 Jan 2016 23:03:10 +0000 (15:03 -0800)]
mm: free swap cache aggressively if memcg swap is full
Swap cache pages are freed aggressively if swap is nearly full (>50%
currently), because otherwise we are likely to stop scanning anonymous
when we near the swap limit even if there is plenty of freeable swap cache
pages. We should follow the same trend in case of memory cgroup, which
has its own swap limit.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Wed, 20 Jan 2016 23:03:07 +0000 (15:03 -0800)]
mm: vmscan: do not scan anon pages if memcg swap limit is hit
We don't scan anonymous memory if we ran out of swap, neither should we do
it in case memcg swap limit is hit, because swap out is impossible anyway.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Wed, 20 Jan 2016 23:03:05 +0000 (15:03 -0800)]
swap.h: move memcg related stuff to the end of the file
The following patches will add more functions to the memcg section of
include/linux/swap.h. Some of them will need values defined below the
current location of the section. So let's move the section to the end of
the file. No functional changes intended.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Wed, 20 Jan 2016 23:03:02 +0000 (15:03 -0800)]
mm: memcontrol: replace mem_cgroup_lruvec_online with mem_cgroup_online
mem_cgroup_lruvec_online() takes lruvec, but it only needs memcg. Since
get_scan_count(), which is the only user of this function, now possesses
pointer to memcg, let's pass memcg directly to mem_cgroup_online() instead
of picking it out of lruvec and rename the function accordingly.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Wed, 20 Jan 2016 23:02:59 +0000 (15:02 -0800)]
mm: vmscan: pass memcg to get_scan_count()
memcg will come in handy in get_scan_count(). It can already be used for
getting swappiness immediately in get_scan_count() instead of passing it
around. The following patches will add more memcg-related values, which
will be used there.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Wed, 20 Jan 2016 23:02:56 +0000 (15:02 -0800)]
mm: memcontrol: charge swap to cgroup2
This patchset introduces swap accounting to cgroup2.
This patch (of 7):
In the legacy hierarchy we charge memsw, which is dubious, because:
- memsw.limit must be >= memory.limit, so it is impossible to limit
swap usage less than memory usage. Taking into account the fact that
the primary limiting mechanism in the unified hierarchy is
memory.high while memory.limit is either left unset or set to a very
large value, moving memsw.limit knob to the unified hierarchy would
effectively make it impossible to limit swap usage according to the
user preference.
- memsw.usage != memory.usage + swap.usage, because a page occupying
both swap entry and a swap cache page is charged only once to memsw
counter. As a result, it is possible to effectively eat up to
memory.limit of memory pages *and* memsw.limit of swap entries, which
looks unexpected.
That said, we should provide a different swap limiting mechanism for
cgroup2.
This patch adds mem_cgroup->swap counter, which charges the actual number
of swap entries used by a cgroup. It is only charged in the unified
hierarchy, while the legacy hierarchy memsw logic is left intact.
The swap usage can be monitored using new memory.swap.current file and
limited using memory.swap.max.
Note, to charge swap resource properly in the unified hierarchy, we have
to make swap_entry_free uncharge swap only when ->usage reaches zero, not
just ->count, i.e. when all references to a swap entry, including the one
taken by swap cache, are gone. This is necessary, because otherwise
swap-in could result in uncharging swap even if the page is still in swap
cache and hence still occupies a swap entry. At the same time, this
shouldn't break memsw counter logic, where a page is never charged twice
for using both memory and swap, because in case of legacy hierarchy we
uncharge swap on commit (see mem_cgroup_commit_charge).
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Wed, 20 Jan 2016 23:02:53 +0000 (15:02 -0800)]
mm: memcontrol: clean up alloc, online, offline, free functions
The creation and teardown of struct mem_cgroup is fairly messy and
that has attracted mistakes and subtle bugs before.
The main cause for this is that there is no clear model about what
needs to happen when, and that attracts more chaos. So create one:
1. mem_cgroup_alloc() should allocate struct mem_cgroup and its
auxiliary members and initialize work items, locks etc. so that the
object it returns is fully initialized and in a neutral state.
2. mem_cgroup_css_alloc() will use mem_cgroup_alloc() to obtain a new
memcg object and configure it and the system according to the role
of the new memory-controlled cgroup in the hierarchy.
3. mem_cgroup_css_online() is no longer needed to synchronize with
iterators, but it verifies css->id which isn't available earlier.
4. mem_cgroup_css_offline() implements stuff that needs to happen upon
the user-visible destruction of a cgroup, which includes stopping
all user interfacing as well as releasing certain structures when
continued memory consumption would be unexpected at that point.
5. mem_cgroup_css_free() prepares the system and the memcg object for
the object's disappearance, neutralizes its state, and then gives
it back to mem_cgroup_free().
6. mem_cgroup_free() releases struct mem_cgroup and auxiliary memory.
[arnd@arndb.de: fix SLOB build regression] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Wed, 20 Jan 2016 23:02:50 +0000 (15:02 -0800)]
mm: memcontrol: flatten struct cg_proto
There are no more external users of struct cg_proto, flatten the
structure into struct mem_cgroup.
Since using those struct members doesn't stand out as much anymore,
add cgroup2 static branches to make it clearer which code is legacy.
Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Wed, 20 Jan 2016 23:02:47 +0000 (15:02 -0800)]
mm: memcontrol: rein in the CONFIG space madness
What CONFIG_INET and CONFIG_LEGACY_KMEM guard inside the memory
controller code is insignificant, having these conditionals is not
worth the complication and fragility that comes with them.
[akpm@linux-foundation.org: rework mem_cgroup_css_free() statement ordering] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Wed, 20 Jan 2016 23:02:44 +0000 (15:02 -0800)]
net: drop tcp_memcontrol.c
tcp_memcontrol.c only contains legacy memory.tcp.kmem.* file definitions
and mem_cgroup->tcp_mem init/destroy stuff. This doesn't belong to
network subsys. Let's move it to memcontrol.c. This also allows us to
reuse generic code for handling legacy memcg files.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov [Wed, 20 Jan 2016 23:02:38 +0000 (15:02 -0800)]
mm: memcontrol: allow to disable kmem accounting for cgroup2
Kmem accounting might incur overhead that some users can't put up with.
Besides, the implementation is still considered unstable. So let's
provide a way to disable it for those users who aren't happy with it.
To disable kmem accounting for cgroup2, pass cgroup.memory=nokmem at
boot time.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Wed, 20 Jan 2016 23:02:35 +0000 (15:02 -0800)]
mm: memcontrol: account "kmem" consumers in cgroup2 memory controller
The original cgroup memory controller has an extension to account slab
memory (and other "kernel memory" consumers) in a separate "kmem"
counter, once the user set an explicit limit on that "kmem" pool.
However, this includes various consumers whose sizes are directly linked
to userspace activity. Accounting them as an optional "kmem" extension
is problematic for several reasons:
1. It leaves the main memory interface with incomplete semantics. A
user who puts their workload into a cgroup and configures a memory
limit does not expect us to leave holes in the containment as big
as the dentry and inode cache, or the kernel stack pages.
2. If the limit set on this random historical subgroup of consumers is
reached, subsequent allocations will fail even when the main memory
pool available to the cgroup is not yet exhausted and/or has
reclaimable memory in it.
3. Calling it 'kernel memory' is misleading. The dentry and inode
caches are no more 'kernel' (or no less 'user') memory than the
page cache itself. Treating these consumers as different classes is
a historical implementation detail that should not leak to users.
So, in addition to page cache, anonymous memory, and network socket
memory, account the following memory consumers per default in the
cgroup2 memory controller:
- threadinfo
- task_struct
- task_delay_info
- pid
- cred
- mm_struct
- vm_area_struct and vm_region (nommu)
- anon_vma and anon_vma_chain
- signal_struct
- sighand_struct
- fs_struct
- files_struct
- fdtable and fdtable->full_fds_bits
- dentry and external_name
- inode for all filesystems.
This should give us reasonable memory isolation for most common
workloads out of the box.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Wed, 20 Jan 2016 23:02:29 +0000 (15:02 -0800)]
mm: memcontrol: separate kmem code from legacy tcp accounting code
The cgroup2 memory controller will include important in-kernel memory
consumers per default, including socket memory, but it will no longer
carry the historic tcp control interface.
Separate the kmem state init from the tcp control interface init in
preparation for that.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Wed, 20 Jan 2016 23:02:24 +0000 (15:02 -0800)]
mm: memcontrol: give the kmem states more descriptive names
On any given memcg, the kmem accounting feature has three separate
states: not initialized, structures allocated, and actively accounting
slab memory. These are represented through a combination of the
kmem_acct_activated and kmem_acct_active flags, which is confusing.
Convert to a kmem_state enum with the states NONE, ALLOCATED, and
ONLINE. Then rename the functions to modify the state accordingly.
This follows the nomenclature of css object states more closely.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kmem page_counter's limit is initialized to PAGE_COUNTER_MAX inside
mem_cgroup_css_online(). There is no need to repeat this from
memcg_propagate_kmem().
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Wed, 20 Jan 2016 23:02:18 +0000 (15:02 -0800)]
mm: memcontrol: drop unused @css argument in memcg_init_kmem
This series adds accounting of the historical "kmem" memory consumers to
the cgroup2 memory controller.
These consumers include the dentry cache, the inode cache, kernel stack
pages, and a few others that are pointed out in patch 7/8. The
footprint of these consumers is directly tied to userspace activity in
common workloads, and so they have to be part of the minimally viable
configuration in order to present a complete feature to our users.
The cgroup2 interface of the memory controller is far from complete, but
this series, along with the socket memory accounting series, provides
the final semantic changes for the existing memory knobs in the cgroup2
interface, which is scheduled for initial release in the next merge
window.
This patch (of 8):
Remove unused css argument frmo memcg_init_kmem()
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Wed, 20 Jan 2016 23:02:15 +0000 (15:02 -0800)]
memstick: use sector_div instead of do_div
do_div is the wrong way to divide a sector_t, as it is less efficient
when sector_t is 32-bit wide. With the upcoming do_div optimizations,
the kernel starts warning about this:
drivers/memstick/core/ms_block.c: In function 'msb_io_work':
include/asm-generic/div64.h:207:28: warning: comparison of distinct pointer types lacks a cast
This changes the code to use sector_div instead, which always produces
optimal code.
dma-mapping: always provide the dma_map_ops based implementation
Move the generic implementation to <linux/dma-mapping.h> now that all
architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now
that everyone supports them.
[valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We'll soon merge <asm-generic/dma-mapping-common.h> into
<linux/dma-mapping.h> and the reference to dma_capable in the tile
dma_set_mask would create a circular dependency.
Fix this by moving the implementation out of line.
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sparc already uses the same code as the generic code for the PCI
implementation but just fails the call sbus. This moves to the generic
implemenation which eventually return -EIO due to the NULL dma_mask
pointer in the device.
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-beck.git / log