Mario Kleiner [Mon, 12 May 2014 22:42:08 +0000 (00:42 +0200)]
drm/nouveau/kms/nv04-nv40: fix pageflip events via special case.
Cards with nv04 display engine can't reliably use vblank
counts and timestamps computed via drm_handle_vblank(), as
the function gets invoked after sending the pageflip events.
Fix this by defaulting to the old crtcid = -1 fallback path
on <= NV-50 cards, and only using the precise path on NV-50
and later.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: <stable@vger.kernel.org> # 3.13+
Mario Kleiner [Wed, 19 Mar 2014 07:12:51 +0000 (08:12 +0100)]
drm/nv50-/mc: fix kms pageflip events by reordering irq handling order.
Whenever a single nouveau_mc_intr() main gpu irq-handler invocation was
responsible for calling both, the vblank-irq handler (display engine irq)
and kms-pageflip completion handler (from fifo irq), the order of
invocation was wrong. nouveau_finish_flip() was called before
drm_handle_vblank() for the vblank of pageflip completion, so the
emitted pageflip event contained stale vblank count and timestamp
from previous vblank. This caused failure in userspace to timestamp
properly.
Reorder order of invocation of engine irq handlers: Put
NVDEV_ENGINE_DISP always on top, and thereby before NVDEV_ENGINE_FIFO,
so that drm_handle_vblank() gets called to update vblank timestamps
and count before potential pageflip events make use of that
information.
This works on nv-50 and later, where kms-pageflip completion triggers
an irq either after a separate vblank irq, or both pageflip and vblank
trigger one common irq invocation, but never before vblank irqs.
v2 (Ben):
- removed mods for nv04-nv40, it doesn't help there anyway
- this is considered a hack, and a better solution should be found
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: <stable@vger.kernel.org> # 3.13+
Mario Kleiner [Wed, 28 May 2014 03:22:18 +0000 (05:22 +0200)]
drm/nouveau/disp/nv04-nv40: abort scanoutpos query on vga analog.
nv04_disp_scanoutpos() must abort to trigger simple timestamping
fallback if vtotal/htotal regs return zero. This happens if the
output isn't a digital output, but a vga analog output, as the
regs don't get initialized in that case.
Fixes timestamping failure on nv-40 and earlier with vga output.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: <stable@vger.kernel.org> # 3.14+
Martin Peres [Thu, 3 Apr 2014 20:12:41 +0000 (22:12 +0200)]
drm/nouveau/bios: fix a potential NULL deref in the PROM shadowing function
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Mon, 12 May 2014 21:19:07 +0000 (23:19 +0200)]
drm/nouveau/therm/fan/tach: default to 2 pulses per revolution
I spent some time this weekend trying to find in the vbios the number of
pulses per revolutions in the vbios but couldn't find it. It would seem
all my cards have 2 pulses per revolution so let's stick to that until
further notice.
Thermal table's id 0x48 may indicate this information but it would seem
that changing the value results in the blob power or clock gating the
RPM counter... We should ask NVIDIA about that, should be trivial-enough
for them to answer.
Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nvc0_graph_ctor() would only let the graphics engine be enabled if its
oclass has a proper microcode linked to it. This prevents GR from being
enabled at all on chips that rely exclusively on external firmware, even
though such a use-case is valid.
Relax the conditions enabling the GR engine to also include the case
where an external firmware has also been loaded.
Also switch to external firmware if the graph class has no microcode
linked to it.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Adapt the NVC0 BAR driver to make it able to support chips that do not
expose a BAR3. When this happens, BAR1 is then used for USERD mapping
and the BAR alloc() functions is disabled, making GPU objects unable
to rely on BAR for data access and falling back to PRAMIN.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Some chips that use system memory exclusively (e.g. GK20A) do not
expose 2 BAR regions. For them only BAR1 exists, and it should be used
for USERD mapping. Do not map BAR3 if its resource does not exist.
Dave Airlie [Mon, 9 Jun 2014 22:53:00 +0000 (08:53 +1000)]
Merge tag 'drm/panel/for-3.16-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/panel: Changes for v3.16-rc1
This set of commits contains a couple of fixes to existing panel drivers
and support for some new panels.
One commit touches the DRM core in that in modifies the MIPI DSI support
to hook up the shutdown function so that drivers can provide code that's
run on shutdown. This is used by a subsequent commit to make the simple
panel driver power off the backlight on shutdown.
* tag 'drm/panel/for-3.16-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/panel: simple - Add AUO B133XTN01 panel support
drm/panel: simple - Disable panel on shutdown
drm/panel: add support for EDT ET057090DHU panel
drm/panel: Add support for EDT ETM0700G0DH6 and ET070080DH6 panels
drm/panel: ld9040: add power control sequence
drm/panel: s6e8aa0: silence array overflow warning
drm/dsi: Support device shutdown
Dave Airlie [Mon, 9 Jun 2014 22:51:19 +0000 (08:51 +1000)]
Merge tag 'drm/tegra/for-3.16-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v3.16-rc1
The majority of these changes are a slew of cleanups across the board.
A more noteworthy change is the addition of drm_dev_set_unique() and the
conversion of the Tegra DRM driver to use it. This allows us to get rid
of the host1x drm_bus implementation. Other USB and platform drivers can
be changed in a similar way. Unfortunately for most PCI devices there is
some userspace that relies on the old functionality and cannot be as
easily converted.
HDMI and hardware cursor support is added for Tegra124. The SOR output
gains support for exposing CRCs via debugfs, which can be used for
automated testing. Many values that were hardcoded in the SOR/eDP code
are now computed at runtime to increase compatibility with more devices.
* tag 'drm/tegra/for-3.16-rc1' of git://anongit.freedesktop.org/tegra/linux: (47 commits)
drm/tegra: sor - Remove obsolete comment
drm/tegra: sor - Enable only the necessary number of lanes
drm/tegra: sor - Power on only the necessary lanes
drm/tegra: sor - Do not program interlaced mode registers
drm/tegra: sor - Do not hardcode link speed
drm/tegra: sor - Do not hardcode number of blank symbols
drm/tegra: sor - Don't hardcode link parameters
drm/tegra: sor - Change power down ordering
drm/tegra: sor - Fix copy/paste error
drm/tegra: sor - Remove pixel clock rounding
drm/tegra: sor - Make debugfs setup consistent
drm/tegra: sor - Recursively remove debugfs tree
drm/tegra: dp - Mark the connector as hotplug capable
drm/tegra: dp - Implement hotplug detection in work queue
drm/tegra: Add hardware cursor support
drm/tegra: Remove host1x drm_bus implementation
drm: Document how to register devices without struct drm_bus
drm: Add device registration documentation
drm: Introduce drm_dev_set_unique()
gpu: host1x: Rename internal functions for clarity
...
Thierry Reding [Thu, 5 Jun 2014 14:20:27 +0000 (16:20 +0200)]
drm/tegra: sor - Remove obsolete comment
According to the DP specification the disparity of the first symbol
should always be negative. It is therefore safe to assume that panels
will conform to that and therefore parameterizing this field should
never be necessary.
Thierry Reding [Thu, 5 Jun 2014 14:31:10 +0000 (16:31 +0200)]
drm/tegra: sor - Don't hardcode link parameters
The currently hardcoded link parameters don't work on all eDP panels, so
compute the parameters at runtime depending on the mode and panel type
to allow the driver to cope with a wider variety of panels.
Note that the number of bits per pixel of the panel is still hardcoded,
but this can be addressed in a separate patch.
This is largely based on a patch by Stéphane Marchesin but the algorithm
was largely rewritten to be more readable and concise.
The code currently rounds up the clock to the next MHZ, which is
rounding up a 69.5MHz clock to 70MHz on my machine. This in turn
prevents the display from syncing. Removing this rounding fixes eDP
for me.
Dave Airlie [Fri, 6 Jun 2014 09:07:09 +0000 (19:07 +1000)]
Merge tag 'drm-intel-fixes-2014-06-06' of git://anongit.freedesktop.org/drm-intel into drm-next
> Bunch of stuff for 3.16 still:
> - Mipi dsi panel support for byt. Finally! From Shobhit&others. I've
> squeezed this in since it's a regression compared to vbios and we've
> been ridiculed about it a bit too often ...
> - connection_mutex deadlock fix in get_connector (only affects i915).
> - Core patches from Matt's primary plane from Matt Roper, I've pushed the
> i915 stuff to 3.17.
> - vlv power well sequencing fixes from Jesse.
> - Fix for cursor size changes from Chris.
> - agpbusy fixes from Ville.
> - A few smaller things.
>
* tag 'drm-intel-fixes-2014-06-06' of git://anongit.freedesktop.org/drm-intel: (32 commits)
drm/i915: BDW: Adding missing cursor offsets.
drm: Fix getconnector connection_mutex locking
drm/i915/bdw: Only use 2g GGTT for 32b platforms
drm/i915: Nuke pipe A quirk on i830M
drm/i915: fix display power sw state reporting
drm/i915: Always apply cursor width changes
drm/i915: tell the user if both KMS and UMS are disabled
drm/plane-helper: Add drm_plane_helper_check_update() (v3)
drm: Check CRTC compatibility in setplane
drm/i915: use VBT to determine whether to enumerate the VGA port
drm/i915: Don't WARN about ring idle bit on gen2
drm/i915: Silence the WARN if the user tries to GTT mmap an incoherent object
drm/i915: Move the C3 LP write bit setup to gen3_init_clock_gating() for KMS
drm/i915: Enable interrupt-based AGPBUSY# enable on 85x
drm/i915: Flip the sense of AGPBUSY_DIS bit
drm/i915: Set AGPBUSY# bit in init_clock_gating
drm/i915/vlv: add pll assertion when disabling DPIO common well
drm/i915/vlv: move DPIO common reset de-assert into __vlv_set_power_well
drm/i915/vlv: re-order power wells so DPIO common comes after TX
drm/i915/vlv: move CRI refclk enable into __vlv_set_power_well
...
Removing only the root directory will fail when there are still files in
it. Instead of manually removing all files, remove the whole directory
recursively.
drm/tegra: dp - Implement hotplug detection in work queue
Calling the drm_helper_hpd_irq_event() helper can sleep, so instead of
invoking it directly from the interrupt handler, schedule a work queue
and run it from there.
Thierry Reding [Fri, 20 Dec 2013 12:58:33 +0000 (13:58 +0100)]
drm/tegra: Add hardware cursor support
Enable hardware cursor support on Tegra124. Earlier generations support
the hardware cursor to some degree as well, but not in a way that can be
generically exposed.
drm: Document how to register devices without struct drm_bus
With the recent addition of the drm_set_unique() function, devices can
now be registered without requiring a drm_bus. Add a brief description
to the DRM docbook to show how that can be achieved.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Mon, 19 May 2014 11:39:07 +0000 (13:39 +0200)]
drm: Add device registration documentation
Describe how devices are registered using the drm_*_init() functions.
Adding this to docbook requires a largish set of changes to the comments
in drm_{pci,usb,platform}.c since they are doxygen-style rather than
proper kernel-doc and therefore mess with the docbook generation.
While at it, mark usage of drm_put_dev() as discouraged in favour of
calling drm_dev_unregister() and drm_dev_unref() directly.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a helper function that allows drivers to statically set the unique
name of the device. This will allow platform and USB drivers to get rid
of their DRM bus implementations and directly use drm_dev_alloc() and
drm_dev_register().
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding [Fri, 15 Nov 2013 15:07:32 +0000 (16:07 +0100)]
drm/tegra: hdmi - Add Tegra124 support
Tegra124 is mostly backwards-compatible with Tegra114. However, Tegra124
supports a few more features (e.g. interlacing, ...). Introduce a new
compatible string and TMDS tables to cope with these differences.
Thierry Reding [Fri, 14 Mar 2014 13:20:42 +0000 (14:20 +0100)]
drm/tegra: dsi - Do not needlessly recompute pclk
In some cases the pixel clock used to not be correct, which is why it
had to be recomputed. It turns out that the reason why it wasn't correct
is that it was used wrongly. If used correctly there's not need for the
recomputation.
Thierry Reding [Wed, 26 Mar 2014 12:32:21 +0000 (13:32 +0100)]
drm/tegra: dc - Compute shift clock divider in output drivers
The shift clock divider is highly dependent on the type of output, so
push computation of it down into the output drivers. The old code used
to work merely by accident.
Thierry Reding [Fri, 14 Mar 2014 13:25:43 +0000 (14:25 +0100)]
drm/tegra: dsi - Reset controller on driver unload
Assert the DSI controller's reset when the driver is unloaded to reduce
power consumption and to put the controller into a known state for
subsequent driver reloads.
Thierry Reding [Fri, 14 Mar 2014 13:15:10 +0000 (14:15 +0100)]
drm/tegra: dsi - Add enable guard
To prevent the enable or disable operations to potentially be run
multiple times, add guards to return early when the output is already
in the targetted state.
The packet sequencer needs to be programmed depending on the video mode
of the attached peripheral. Add support for non-burst video modes with
sync events (as opposed to sync pulses) and select either sequence
depending on the video mode.
Thierry Reding [Fri, 14 Mar 2014 13:07:50 +0000 (14:07 +0100)]
drm/tegra: dsi - Implement VDD supply support
The DSI controllers are powered by a (typically 1.2V) regulator. Usually
this is always on, so there was no need to support enabling or disabling
it thus far. But in order not to consume any power when DSI is inactive,
give the driver a chance to enable or disable the supply as needed.
Thierry Reding [Fri, 14 Mar 2014 13:02:28 +0000 (14:02 +0100)]
drm/tegra: dsi - Remove unneeded code
A bunch of registers are initialized to 0 upon during driver probe. It
turns out that none of these are actually needed, so they can simply be
dropped.
Thierry Reding [Thu, 13 Mar 2014 07:50:39 +0000 (08:50 +0100)]
drm/tegra: dsi - Use internal pixel format
The pixel format enumeration values used by the Tegra DSI controller
don't match those defined by the DSI framework. Make sure to convert
them to the internal format before writing it to the register.
For some reason when the PW*_ENABLE and PM*_ENABLE fields are cleared
during disable, the HDMI output stops working properly. Resetting and
initializing doesn't help.
Comment out those accesses for now until it has been determined what to
do about them.
Disable LVDS mode according to register documentation. It seems like
this has no effect on the operation of HDMI, but it's probably a good
idea to do this anyway.
Thierry Reding [Fri, 28 Feb 2014 15:57:34 +0000 (16:57 +0100)]
drm/tegra: hdmi - Add connector supply support
Revert commit 18ebc0f404d5 "drm/tegra: hdmi: Enable VDD earlier for
hotplug/DDC" and instead add a new supply for the +5V pin on the HDMI
connector.
The vdd-supply property refers to the regulator that supplies the
AVDD_HDMI input on Tegra, rather than the +5V HDMI connector pin. This
was never a problem before, because all boards had that pin hooked up to
a regulator that was always on. Starting with Dalmore and continuing
with Venice2, the +5V pin is controllable via a GPIO. For reasons
unknown, the GPIO ended up as the controlling GPIO of the AVDD_HDMI
supply in the Dalmore and Venice2 DTS files. But that's not correct.
Instead, a separate supply must be introduced so that the +5V pin can be
controlled separately from the supplies that feed the HDMI block within
Tegra.
A new hdmi-supply property is introduced that takes the place of the
vdd-supply and vdd-supply is only enabled when HDMI is enabled rather
than all the time.
drm/tegra: dc - Do not touch power control register
Setting the bits in this register is dependent on the output type driven
by the display controller. All output drivers already set these properly
so there is no need to do it here again.
Thierry Reding [Fri, 14 Mar 2014 08:54:58 +0000 (09:54 +0100)]
drm/tegra: dc - Reshuffle code to get rid of prototypes
The tegra_dc_format() and tegra_dc_setup_window() functions are only
used internally by the display controller driver. Move them upwards in
order to make them static and get rid of the function prototypes.
Thierry Reding [Fri, 31 Jan 2014 09:02:15 +0000 (10:02 +0100)]
drm/tegra: sor - Add CRC debugfs support
The SOR allows the computation of a 32 bit CRC of the content that it
transmits. This functionality is exposed via debugfs and is useful to
verify proper operation of the SOR.
Thierry Reding [Wed, 29 Jan 2014 19:31:17 +0000 (20:31 +0100)]
drm/tegra: dc - Add YUYV support
YUYV is UYVY with swapped bytes. Luckily the Tegra DC hardware can swap
bytes during scan-out, so supporting YUYV is simply a matter of writing
the correct value to the byteswap register.
This patch modifies tegra_dc_format() to return the byte swap parameter
via an output parameter in addition to returning the pixel format. Many
other formats can potentially be supported in a similar way.
Daniel Vetter [Thu, 5 Jun 2014 09:12:03 +0000 (11:12 +0200)]
drm: Fix getconnector connection_mutex locking
I've fumbled my own idea and enthusiastically wrapped all the
getconnector code with the connection_mutex. But we only need it to
chase the connector->encoder link. Even there it's not really needed
since races with userspace won't matter, but better paranoid and
consistent about this stuff.
If we grap it everywhere connector probe callbacks can't grab it
themselves, which means they'll deadlock. i915 does that for the load
detect pipe. Furthermore i915 needs to do a ww dance since we also
need to grab the mutex of the load detect crtc.
drm: Split connection_mutex out of mode_config.mutex (v3)
Cc: Rob Clark <robdclark@gmail.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Andrzej Hajda [Tue, 8 Apr 2014 10:58:05 +0000 (12:58 +0200)]
drm/panel: ld9040: add power control sequence
Some ld9040 panels do not start without providing power control sequence
during initialization. The patch fixes the driver by providing such
sequence for all panels.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Rodrigo Vivi [Thu, 5 Jun 2014 00:09:30 +0000 (17:09 -0700)]
drm/i915: BDW: Adding missing cursor offsets.
BDW uses IVB cursor offsets.
Whithout this patch it is not possible to use multiple outputs with cursor
on BDW.
The cursor gets completely crazy because update position uses the wrong
cursor register for the second pipe.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79621 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 5 Jun 2014 09:07:20 +0000 (11:07 +0200)]
drm: Fix getconnector connection_mutex locking
I've fumbled my own idea and enthusiastically wrapped all the
getconnector code with the connection_mutex. But we only need it to
chase the connector->encoder link. Even there it's not really needed
since races with userspace won't matter, but better paranoid and
consistent about this stuff.
If we grap it everywhere connector probe callbacks can't grab it
themselves, which means they'll deadlock. i915 does that for the load
detect pipe. Furthermore i915 needs to do a ww dance since we also
need to grab the mutex of the load detect crtc.
drm: Split connection_mutex out of mode_config.mutex (v3)
Cc: Rob Clark <robdclark@gmail.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Tue, 27 May 2014 23:53:08 +0000 (16:53 -0700)]
drm/i915/bdw: Only use 2g GGTT for 32b platforms
Daniel requested in the bug that I use a 3GB fallback size. Since this
is not in the spec as a valid size, I decided against it. We could
potentially add a patch to bump it to 3GB on top of this one.
This probably should be CC: stable - but I'll let the powers that be
decide that one.
Regression from a revert of the revert:
commit 7907f45bf9f67a1c5e5d4ae05bab428d7c2f43b2
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date: Wed Feb 19 22:05:46 2014 -0800
Revert "drm/i915/bdw: Limit GTT to 2GB"
v2: Change ifdef to 32b, instead of ifndef
update comment
v3. Update comment to not wrap (Daniel).
Update commit message
v4: s/CONFIG_32/CONFIG_X86_32 (Jani).
v5: s/CONFIG_x86_32BIT/CONFIG_x86_32, as meant in v4
s/32B/32b (chris)
Daniel Vetter [Mon, 2 Jun 2014 15:57:18 +0000 (17:57 +0200)]
drm/i915: Nuke pipe A quirk on i830M
Apparently it does more harm than good. Thomas Richter reports that
it helps his machine (Thinkpad X31) and there's another report from a
Fujitsu S6010. Also, we've nuked it on i845G already to make Chris'
machine happy.
Cc: Thomas Richter <richter@rus.uni-stuttgart.de>
References: http://mid.mail-archive.com/538C54E0.8090507@rus.uni-stuttgart.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Mon, 2 Jun 2014 11:21:10 +0000 (14:21 +0300)]
drm/i915: fix display power sw state reporting
Atm, we refcount both power domains and power wells and
intel_display_power_enabled_sw() returns the power domain refcount. What
the callers are really interested in though is the sw state of the
underlying power wells. Due to this we will report incorrectly that a
given power domain is off if its power wells were enabled via another
power domain, for example POWER_DOMAIN_INIT which enables all power
wells.
As a fix return instead the state based on the refcount of all power
wells included in the passed in power domain.
References: https://bugs.freedesktop.org/show_bug.cgi?id=79505
References: https://bugs.freedesktop.org/show_bug.cgi?id=79038 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 30 May 2014 13:35:26 +0000 (16:35 +0300)]
drm/i915: Always apply cursor width changes
It is possible for userspace to create a big object large enough for a
256x256, and then switch over to using it as a 64x64 cursor. This
requires the cursor update routines to check for a change in width on
every update, rather than just when the cursor is originally enabled.
This also fixes an issue with 845g/865g which cannot change the base
address of the cursor whilst it is active.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[Antti:rebased, adjusted macro names and moved some lines, no functional
changes] Reviewed-by: Antti Koskipaa <antti.koskipaa@linux.intel.com> Tested-by: Antti Koskipaa <antti.koskipaa@linux.intel.com> Cc: stable@vger.kernel.org
Testcase: igt/kms_cursor_crc/cursor-size-change Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Mon, 2 Jun 2014 13:58:30 +0000 (16:58 +0300)]
drm/i915: tell the user if both KMS and UMS are disabled
If both KMS is disabled (by i915.modeset=0 or nomodeset parameters) and
UMS is disabled (by CONFIG_DRM_I915_UMS=n, the default), the user might
not be aware his setup is not supported. Inform the users (and, by
extension, the poor i915 developers having to read their dmesgs in bug
reports) why their graphics experience might be lacking.
A similar message was added on the UMS path in
commit e147accbd19f55489dabdcc4dc3551cc3e3f2553
Author: Jani Nikula <jani.nikula@intel.com>
Date: Thu Oct 10 15:25:37 2013 +0300
drm/i915: tell the user KMS is required for gen6+
but it won't be reached if CONFIG_DRM_I915_UMS=n since
commit b30324adaf8d2e5950a602bde63030d15a61826f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Nov 13 22:11:25 2013 +0100
drm/i915: Deprecated UMS support
v2: Use DRM_DEBUG_DRIVER.
Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull the parameter checking from drm_primary_helper_update() out into
its own function; drivers that provide their own setplane()
implementations rather than using the helper may still want to share
this parameter checking logic.
A few of the checks here were also updated based on suggestions by
Ville Syrjälä.
v3:
- s/primary_helper/plane_helper/ --- this checking logic may be useful
for other types of planes as well.
- Fix visibility check (need to dereference visibility pointer)
v2:
- Pass src/dest/clip rects and min/max scaling down to helper to avoid
duplication of effort between helper and drivers (suggested by
Ville).
- Allow caller to specify whether the primary plane should be
updatable while the crtc is disabled.
Cc: dri-devel@lists.freedesktop.org Reviewed-by: Chon Ming Lee <chon.ming.lee@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Dave Airlie <airlied@gmail.com>
[danvet: Include header properly and fixup declaration mismatch to
make this compile.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper [Thu, 29 May 2014 15:06:51 +0000 (08:06 -0700)]
drm: Check CRTC compatibility in setplane
The DRM core setplane code should check that the plane is usable on the
specified CRTC before calling into the driver.
Prior to this patch, a plane's possible_crtcs field was purely
informational for userspace and was never actually verified at the
kernel level (aside from the primary plane helper).
Cc: dri-devel@lists.freedesktop.org Reviewed-by: Chon Ming Lee <chon.ming.lee@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 28 May 2014 16:12:13 +0000 (19:12 +0300)]
drm/i915: Don't WARN about ring idle bit on gen2
Gen2 doesn't have the ring idle/stop bits in the SCPD/MI_MODE register,
so don't go spewing warnings about the state of those bits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Wed, 28 May 2014 15:16:41 +0000 (16:16 +0100)]
drm/i915: Silence the WARN if the user tries to GTT mmap an incoherent object
If the user tries to mmap through the GTT an object that is marked as
snooped, we report an error rather than allow the GPU to hang the
machine. The choice of EINVAL, however, was unfortunate as we turn that
into a WARN rather than a quiet SIGBUS.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Tue, 25 Feb 2014 13:13:41 +0000 (15:13 +0200)]
drm/i915: Move the C3 LP write bit setup to gen3_init_clock_gating() for KMS
Move the MI_ARB_STATE MI_ARB_C3_LP_WRITE_ENABLE setup to
gen3_init_clock_gating() from i915_gem_load() when KMS is enabled. Leave
it in i915_gem_load() for the UMS case, but add an explcit check, just
to make it easier to spot it when we eventually rip out UMS support.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>