This is caused by writing over the end of numa mask bitmap
in numa_clear_kernel_node().
numa_clear_kernel_node() tries to set the node id in a mask bitmap,
by iterating all reserved regions and assuming that every region
has a valid nid.
This assumption is not true because there's an exception for some
graphic memory quirks. See trim_snb_memory() in arch/x86/kernel/setup.c
It is easily to reproduce the bug in the kdump kernel because kdump
kernel use pre-reserved memory instead of the whole memory, but
kexec pass other reserved memory ranges to 2nd kernel as well.
like below in my test:
kdump kernel ram 0x2d000000 - 0x37bfffff
One of the reserved regions: 0x40000000 - 0x40100000 which
includes 0x40004000, a page excluded in trim_snb_memory(). For
this memblock reserved region the nid is not set, it is still
default value MAX_NUMNODES. later node_set will set bit
MAX_NUMNODES thus stack corruption happen.
This also happens when booting with mem= kernel commandline
during my test.
Fixing it by adding a check, do not call node_set in case nid is
MAX_NUMNODES.
Signed-off-by: Dave Young <dyoung@redhat.com> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bhe@redhat.com Cc: qiuxishi@huawei.com Link: http://lkml.kernel.org/r/20150407134132.GA23522@dhcp-16-198.nay.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
1) In TCP, don't register an FRTO for cumulatively ACK'd data that was
previously SACK'd, from Neal Cardwell.
2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup,
from Cong WANG.
3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also
from Cong WANG.
4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel.
5) When we encapsulate for a tunnel device, skb->sk still points to the
user socket. So this leads to cases where we retraverse the
ipv4/ipv6 output path with skb->sk being of some other address
family (f.e. AF_PACKET). This can cause things to crash since the
ipv4 output path is dereferencing an AF_PACKET socket as if it were
an ipv4 one.
The short term fix for 'net' and -stable is to elide these socket
checks once we've entered an encapsulation sequence by testing
xmit_recursion.
Longer term we have a better solution wherein we pass the tunnel's
socket down through the output paths, but that is way too invasive
for 'net' and -stable.
From Hannes Frederic Sowa.
6) l2tp_init() failure path forgets to unregister per-net ops, from
Cong WANG.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net/mlx4_core: Fix error message deprecation for ConnectX-2 cards
net: dsa: fix filling routing table from OF description
l2tp: unregister l2tp_net_ops on failure path
mvneta: dont call mvneta_adjust_link() manually
ipv6: protect skb->sk accesses from recursive dereference inside the stack
netns: don't allocate an id for dead netns
Revert "netns: don't clear nsid too early on removal"
ip6mr: call del_timer_sync() in ip6mr_free_table()
net: move fib_rules_unregister() under rtnl lock
ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup
tcp: fix FRTO undo on cumulative ACK of SACKed range
xen-netfront: transmit fully GSO-sized packets
net/mlx4_core: Fix error message deprecation for ConnectX-2 cards
Commit 1daa4303b4ca ("net/mlx4_core: Deprecate error message at
ConnectX-2 cards startup to debug") did the deprecation only for port 1
of the card. Need to deprecate for port 2 as well.
Fixes: 1daa4303b4ca ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: fix filling routing table from OF description
According to description in 'include/net/dsa.h', in cascade switches
configurations where there are more than one interconnected devices,
'rtable' array in 'dsa_chip_data' structure is used to indicate which
port on this switch should be used to send packets to that are destined
for corresponding switch.
However, dsa_of_setup_routing_table() fills 'rtable' with port numbers
of the _target_ switch, but not current one.
This commit removes redundant devicetree parsing and adds needed port
number as a function argument. So dsa_of_setup_routing_table() now just
looks for target switch number by parsing parent of 'link' device node.
To remove possible misunderstandings with the way of determining target
switch number, a corresponding comment was added to the source code and
to the DSA device tree bindings documentation file.
This was tested on a custom board with two Marvell 88E6095 switches with
following corresponding routing tables: { -1, 10 } and { 8, -1 }.
Signed-off-by: Pavel Nakonechny <pavel.nakonechny@skitlab.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Updates for the input subsystem - two more tweaks for ALPS driver to
work out kinks after splitting the touchpad, trackstick, and potential
external PS/2 mouse into separate input devices.
Changes to support ALPS SS4 devices (protocol V8) will be coming in
4.1..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: alps - document stick behavior for protocol V2
Input: alps - report V2 Dualpoint Stick events via the right evdev node
Input: alps - report interleaved bare PS/2 packets via dev3
ipv6: protect skb->sk accesses from recursive dereference inside the stack
We should not consult skb->sk for output decisions in xmit recursion
levels > 0 in the stack. Otherwise local socket settings could influence
the result of e.g. tunnel encapsulation process.
ipv6 does not conform with this in three places:
1) ip6_fragment: we do consult ipv6_npinfo for frag_size
2) sk_mc_loop in ipv6 uses skb->sk and checks if we should
loop the packet back to the local socket
3) ip6_skb_dst_mtu could query the settings from the user socket and
force a wrong MTU
Furthermore:
In sk_mc_loop we could potentially land in WARN_ON(1) if we use a
PF_PACKET socket ontop of an IPv6-backed vxlan device.
Reuse xmit_recursion as we are currently only interested in protecting
tunnel devices.
Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Take a look at the first instruction byte before optimizing the NOP -
there might be something else there already, like the ALTERNATIVE_2()
in rdtsc_barrier() which NOPs out on AMD even though we just
patched in an MFENCE.
This happens because the alternatives sees X86_FEATURE_MFENCE_RDTSC,
AMD CPUs set it, we patch in the MFENCE and right afterwards it sees
X86_FEATURE_LFENCE_RDTSC which AMD CPUs don't set and we blindly
optimize the NOP.
Checking whether at least the first byte is 0x90 prevents that.
Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1428181662-18020-1-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
x86/asm/entry: Clear EXTRA_REGS for all executable formats
On failure, sys_execve() does not clobber EXTRA_REGS, so we can
just return to userpsace without saving/restoring them.
On success, ELF_PLAT_INIT() in sys_execve() clears all these
registers.
On other executable formats:
- binfmt_flat.c has similar FLAT_PLAT_INIT, but x86 (and everyone
else except sh) doesn't define it.
- binfmt_elf_fdpic.c has ELF_FDPIC_PLAT_INIT, but x86 (and most
others) doesn't define it.
- There are no such hooks in binfmt_aout.c et al. We inherit
EXTRA_REGS from the prior executable.
This inconsistency was not intended.
This change removes SAVE/RESTORE_EXTRA_REGS in stub_execve,
removes register clearing in ELF_PLAT_INIT(),
and instead simply clears them on success in stub_execve.
In 2007 sigaltstack syscall support was added, where the return
value of restore_sigcontext() was changed to carry the memory-copying
failure code.
But instead of putting 'ax' into regs->ax directly, it was carried
in via a pointer and then returned, where the generic syscall return
code copied it to regs->ax.
So there was never any deeper reason for this suboptimal pattern, it
was simply never noticed after being introduced.
Signed-off-by: Brian Gerst <brgerst@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1428152303-17154-1-git-send-email-brgerst@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Hans de Goede [Sat, 4 Apr 2015 00:20:05 +0000 (17:20 -0700)]
Input: alps - report V2 Dualpoint Stick events via the right evdev node
On V2 devices the DualPoint Stick reports bare packets, these should be
reported via the "AlpsPS/2 ALPS DualPoint Stick" dev2 evdev node, which also
has the INPUT_PROP_POINTING_STICK propbit set.
Note that since there is no way to distinguish these packets from an external
PS/2 mouse (insofar as these laptops have an external PS/2 port) this means
that we will be reporting PS/2 mouse events via this evdev node too, as we've
been doing in kernel 3.19 and older.
This has been tested on a Dell Latitude D620 and a Dell Latitude E6400,
which both have a V2 touchpad + a DualPoint Stick which reports bare packets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Sat, 4 Apr 2015 00:14:40 +0000 (17:14 -0700)]
Input: alps - report interleaved bare PS/2 packets via dev3
Bare packets should be reported via the same evdev device independent on
whether they are detected on the beginning of a packet or in the middle
of a packet.
This has been tested on a Dell Latitude E6400, where the DualPoint Stick
reports bare packets, which get reported via dev3 when the touchpad is
idle, and via dev2 when the touchpad and stick are used simultaneously.
This commit fixes this inconsistency by always reporting bare packets via
dev3. Note that since the come from a DualPoint Stick they really should be
reported via dev2, this gets fixed in a later commit.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Merge tag 'usb-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes and new device ids for 4.0-rc6. Nothing
major, some xhci fixes for reported problems, and some usb-serial
device ids.
All have been in linux-next for a while"
* tag 'usb-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: ftdi_sio: Use jtag quirk for SNAP Connect E10
usb: isp1760: fix spin unlock in the error path of isp1760_udc_start
usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers
usb: xhci: handle Config Error Change (CEC) in xhci driver
USB: keyspan_pda: add new device id
USB: ftdi_sio: Added custom PID for Synapse Wireless product
Merge tag 'staging-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some staging driver fixes, well, really all just IIO driver
fixes, for 4.0-rc6. They fix issues that have been reported with
these drivers.
All of these patches have been in linux-next for a while"
* tag 'staging-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: imu: Use iio_trigger_get for indio_dev->trig assignment
iio: adc: vf610: use ADC clock within specification
iio/adc/cc10001_adc.c: Fix !HAS_IOMEM build
iio: core: Fix double free.
iio:inv-mpu6050: Fix inconsistency for the scale channel
staging: iio: dummy: Fix undefined symbol build error
iio: inv_mpu6050: Clear timestamps fifo while resetting hardware fifo
staging: iio: hmc5843: Set iio name property in sysfs
iio: bmc150: change sampling frequency
iio: fix drivers that check buffer->scan_mask
Merge tag 'tty-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are 3 serial driver fixes for 4.0-rc6. They fix some reported
issues with the samsung and fsl_lpuart drivers.
All have been in linux-next for a while"
* tag 'tty-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: fsl_lpuart: clear receive flag on FIFO flush
tty: serial: fsl_lpuart: specify transmit FIFO size
serial: samsung: Clear operation mode on UART shutdown
Quentin caught a corner case with the generation of instruction
padding in the ALTERNATIVE_2 macro: if len(orig_insn) <
len(alt1) < len(alt2), then not enough padding gets added and
that is not good(tm) as we could overwrite the beginning of the
next instruction.
Luckily, at the time of this writing, we don't have
ALTERNATIVE_2() invocations which have that problem and even if
we did, a simple fix would be to prepend the instructions with
enough prefixes so that that corner case doesn't happen.
However, best it would be if we fixed it properly. See below for
a simple, abstracted example of what we're doing.
So what we ended up doing is, we compute the
max(len(alt1), len(alt2)) - len(orig_insn)
and feed that value to the .skip gas directive. The max() cannot
have conditionals due to gas limitations, thus the fancy integer
math.
With this patch, all ALTERNATIVE_2 sites get padded correctly;
generating obscure test cases pass too:
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
"A fix for ALPS driver for issue introduced in the latest update and a
tweak for yet another Lenovo box in Synaptics.
There will be more ALPS tweaks coming.."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: define INPUT_PROP_ACCELEROMETER behavior
Input: synaptics - fix min-max quirk value for E440
Input: synaptics - add quirk for Thinkpad E440
Input: ALPS - fix max coordinates for v5 and v7 protocols
Input: add MT_TOOL_PALM
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes: a SYSRET single-stepping fix, a dmi-scan robustization
fix, a reboot quirk and a kgdb fixlet"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kgdb/x86: Fix reporting of 'si' in kgdb on x86_64
x86/asm/entry/64: Disable opportunistic SYSRET if regs->flags has TF set
x86/reboot: Add ASRock Q1900DC-ITX mainboard reboot quirk
MAINTAINERS: Change the x86 microcode loader maintainer
firmware: dmi_scan: Prevent dmi_num integer overflow
Nicolas Dichtel [Fri, 3 Apr 2015 10:02:37 +0000 (12:02 +0200)]
netns: don't allocate an id for dead netns
First, let's explain the problem.
Suppose you have an ipip interface that stands in the netns foo and its link
part in the netns bar (so the netns bar has an nsid into the netns foo).
Now, you remove the netns bar:
- the bar nsid into the netns foo is removed
- the netns exit method of ipip is called, thus our ipip iface is removed:
=> a netlink message is built in the netns foo to advertise this deletion
=> this netlink message requests an nsid for bar, thus a new nsid is
allocated for bar and never removed.
This patch adds a check in peernet2id() so that an id cannot be allocated for
a netns which is currently destroyed.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
x86/asm/entry/64: Fix MSR_IA32_SYSENTER_CS MSR value
Commit:
d56fe4bf5f3c ("x86/asm/entry/64: Always set up SYSENTER MSRs")
missed to add "ULL" to the 0 and wrmsrl_safe() complains:
arch/x86/kernel/cpu/common.c: In function ‘syscall_init’:
arch/x86/kernel/cpu/common.c:1226:2: warning: right shift count >= width of type wrmsrl_safe(MSR_IA32_SYSENTER_CS, 0);
x86/mm/KASLR: Propagate KASLR status to kernel proper
Commit:
e2b32e678513 ("x86, kaslr: randomize module base load address")
made module base address randomization unconditional and didn't regard
disabled KKASLR due to CONFIG_HIBERNATION and command line option
"nokaslr". For more info see (now reverted) commit:
f47233c2d34f ("x86/mm/ASLR: Propagate base load address calculation")
In order to propagate KASLR status to kernel proper, we need a single bit
in boot_params.hdr.loadflags and we've chosen bit 1 thus leaving the
top-down allocated bits for bits supposed to be used by the bootloader.
Mark Einon [Wed, 1 Apr 2015 21:32:04 +0000 (22:32 +0100)]
x86/earlyprintk: Put CONFIG_PCI-only functions under the #ifdef
Two static functions are only used if CONFIG_PCI is defined, so only
build them if this is the case. Fixes the build warnings:
arch/x86/kernel/early_printk.c:98:13: warning: ‘mem32_serial_out’ defined but not used [-Wunused-function]
static void mem32_serial_out(unsigned long addr, int offset, int value)
^
arch/x86/kernel/early_printk.c:105:21: warning: ‘mem32_serial_in’ defined but not used [-Wunused-function]
static unsigned int mem32_serial_in(unsigned long addr, int offset)
^
Also convert a few related instances of uintXX_t to kernel specific uXX
defines.
Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stuart.r.anderson@intel.com Link: http://lkml.kernel.org/r/1427923924-22653-1-git-send-email-mark.einon@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
x86/mce/severity: Fix warning about indented braces
Dan reported compiler warnings about missing curly braces in
mce_severity_amd(). Reindent the catch-all "return MCE_AR_SEVERITY"
correctly to single tab.
While at it, chain ctx == IN_KERNEL check with mcgstatus check to make
it cleaner, as suggested by Boris.
No functional changes are introduced by this patch.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1427814281-18192-1-git-send-email-Aravind.Gopalakrishnan@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
A recent conflict resolution has left tick_resume() in
tick_unfreeze() which leads to an unbalanced execution of
tick_resume_broadcast() every time that function runs.
Fix that by replacing the tick_resume() in tick_unfreeze()
with tick_resume_local() as appropriate.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: boris.ostrovsky@oracle.com Cc: david.vrabel@citrix.com Cc: konrad.wilk@oracle.com Cc: peterz@infradead.org Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/8099075.V0LvN3pQAV@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Fri, 3 Apr 2015 00:12:12 +0000 (17:12 -0700)]
x86/asm/entry/64/compat: Use SYSRETL to return from compat mode SYSENTER
SYSEXIT is scary on 64-bit kernels -- SYSEXIT must be invoked
with usergs and IRQs on. That means that we rely on STI to
correctly mask interrupts for one instruction. This is okay by
itself, but the semantics with respect to NMIs are unclear.
Avoid the whole issue by using SYSRETL instead. For background,
Intel CPUs don't allow SYSCALL from compat mode, but they do
allow SYSRETL back to compat mode. Go figure.
To avoid doing too much at once, this doesn't revamp the calling
convention. We still return with EBP, EDX, and ECX on the user
stack.
Oddly this seems to be 30 cycles or so faster. Avoiding POPFQ
and STI will account for under half of that, I think, so my best
guess is that Intel just optimizes SYSRET much better than
SYSEXIT.
Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/57a0bf1b5230b2716a64ebe48e9bc1110f7ab433.1428019097.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 3 Apr 2015 00:39:05 +0000 (02:39 +0200)]
timekeeping: Get rid of stale comment
Arch specific management of xtime/jiffies/wall_to_monotonic is
gone for quite a while. Zap the stale comment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/2422730.dmO29q661S@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 3 Apr 2015 00:38:05 +0000 (02:38 +0200)]
clockevents: Cleanup dead cpu explicitely
clockevents_notify() is a leftover from the early design of the
clockevents facility. It's really not a notification mechanism,
it's a multiplex call. We are way better off to have explicit
calls instead of this monstrosity.
Split out the cleanup function for a dead cpu and invoke it
directly from the cpu down code. Make it conditional on
CPU_HOTPLUG as well.
Temporary change, will be refined in the future.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ Rebased, added clockevents_notify() removal ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1735025.raBZdQHM3m@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 3 Apr 2015 00:37:24 +0000 (02:37 +0200)]
clockevents: Make tick handover explicit
clockevents_notify() is a leftover from the early design of the
clockevents facility. It's really not a notification mechanism,
it's a multiplex call. We are way better off to have explicit
calls instead of this monstrosity.
Split out the tick_handover call and invoke it explicitely from
the hotplug code. Temporary solution will be cleaned up in later
patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ Rebase ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1658173.RkEEILFiQZ@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 3 Apr 2015 00:34:49 +0000 (02:34 +0200)]
sched/idle: Use explicit broadcast oneshot control function
Replace the clockevents_notify() call with an explicit function call.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/6422336.RMm7oUHcXh@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 3 Apr 2015 00:31:29 +0000 (02:31 +0200)]
ARM: OMAP: Use explicit broadcast oneshot control function
Replace the clockevents_notify() call with an explicit function call.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tony Lindgren <tony@atomide.com> Link: http://lkml.kernel.org/r/3123047.uVjevtxDV7@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 3 Apr 2015 00:14:23 +0000 (02:14 +0200)]
intel_idle: Use explicit broadcast oneshot control function
Replace the clockevents_notify() call with an explicit function call.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20714596.QMfNNPbuyU@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 3 Apr 2015 00:12:03 +0000 (02:12 +0200)]
ACPI/idle: Use explicit broadcast control function
Replace the clockevents_notify() call with an explicit function call.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/2653377.MSAlfA939I@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 3 Apr 2015 00:06:37 +0000 (02:06 +0200)]
ACPI/PAD: Use explicit broadcast oneshot control function
Replace the clockevents_notify() call with an explicit function call.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1552509.UntNmyqF5v@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 3 Apr 2015 00:05:53 +0000 (02:05 +0200)]
x86/amd/idle, clockevents: Use explicit broadcast oneshot control functions
Replace the clockevents_notify() call with an explicit function call.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/8569669.lgxIty9PKW@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 3 Apr 2015 00:05:15 +0000 (02:05 +0200)]
clockevents: Provide explicit broadcast oneshot control functions
clockevents_notify() is a leftover from the early design of the
clockevents facility. It's really not a notification mechanism,
it's a multiplex call. We are way better off to have explicit
calls instead of this monstrosity.
Split out the broadcast oneshot control into a separate function
and provide inline helpers. Switch clockevents_notify() over.
This will go away once all callers are converted.
This also gets rid of the nested locking of clockevents_lock and
broadcast_lock. The broadcast oneshot control functions do not
require clockevents_lock. Only the managing functions
(setup/shutdown/suspend/resume of the broadcast device require
clockevents_lock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Len Brown <lenb@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Link: http://lkml.kernel.org/r/13000649.8qZuEDV0OA@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 3 Apr 2015 00:03:42 +0000 (02:03 +0200)]
clockevents: Remove the broadcast control leftovers
All users converted. Remove the notify leftovers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/2076318.76XJZ8QYP3@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 3 Apr 2015 00:02:47 +0000 (02:02 +0200)]
ARM: OMAP: Use explicit broadcast control function
Replace the clockevents_notify() call with an explicit function call.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tony Lindgren <tony@atomide.com> Link: http://lkml.kernel.org/r/2124877.3nbWGILHCV@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 3 Apr 2015 00:02:34 +0000 (02:02 +0200)]
intel_idle: Use explicit broadcast control function
Replace the clockevents_notify() call with an explicit function call.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/3878165.rXNXrtVNuy@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 3 Apr 2015 00:02:18 +0000 (02:02 +0200)]
cpuidle: Use explicit broadcast control function
Replace the clockevents_notify() call with an explicit function call.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/2106401.cYdJzzA6Ic@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 3 Apr 2015 00:02:00 +0000 (02:02 +0200)]
ACPI/processor: Use explicit broadcast control function
Replace the clockevents_notify() call with an explicit function call.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/25071624.dkenaL3SGT@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 3 Apr 2015 00:01:49 +0000 (02:01 +0200)]
ACPI/PAD: Use explicit broadcast control function
Replace the clockevents_notify() call with an explicit function call.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1521832.mm0ZfkTzTA@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 3 Apr 2015 00:01:28 +0000 (02:01 +0200)]
x86/amd/idle, clockevents: Use explicit broadcast control function
Replace the clockevents_notify() call with an explicit function call.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1528188.S1pjqkSL1P@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 3 Apr 2015 00:01:10 +0000 (02:01 +0200)]
clockevents: Provide explicit broadcast control functions
clockevents_notify() is a leftover from the early design of the
clockevents facility. It's really not a notification mechanism,
it's a multiplex call. We are way better off to have explicit
calls instead of this monstrosity.
Split out the broadcast control into a separate function and
provide inline helpers. Switch clockevents_notify() over. This
will go away once all callers are converted.
This also gets rid of the nested locking of clockevents_lock and
broadcast_lock. The broadcast control functions do not require
clockevents_lock. Only the managing functions
(setup/shutdown/suspend/resume of the broadcast device require
clockevents_lock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Len Brown <lenb@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tony Lindgren <tony@atomide.com> Link: http://lkml.kernel.org/r/8086559.ttsuS0n1Xr@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Thu, 2 Apr 2015 23:46:34 +0000 (01:46 +0200)]
ACPI/PAD: Remove the local APIC nonsense
While looking through the (ab)use of the clockevents_notify()
function I stumbled over the following gem in the acpi_pad code:
if (lapic_detected_unstable && !lapic_marked_unstable) {
/* LAPIC could halt in idle, so notify users */
for_each_online_cpu(i)
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &i);
lapic_marked_unstable = 1;
}
This code calls on the cpu which detects the lapic unstable
condition first clockevents_notify() to tell the core code that
the broadcast should be enabled on all online cpus. Brilliant
stuff that as it notifies the core code a num_online_cpus()
times that the broadcast should be enabled on the current cpu.
This probably has never been noticed because that code got never
tested with NOHZ=n and HIGHRES_TIMER=n or it just worked by
chance because one of the other mechanisms told the core in the
right way that the local apic timer is wreckaged.
Sigh, this is:
- The 4th incarnation of idle drivers which has their own mechanism
to detect and deal with X86_FEATURE_ARAT.
- The 2nd incarnation of fake idle mechanisms with a different set of
brainmelting bugs.
- Has been merged against an explicit NAK of the scheduler
maintainer with the promise to improve it over time.
- Another example of featuritis driven trainwreck engineering.
- Another pointless waste of my time.
Fix this nonsense by removing that lapic detection and
notification logic and simply call into the clockevents code
unconditonally. The ARAT feature is marked in the lapic
clockevent already so the core code will just ignore the
requests and return.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1887788.RObRuI4tSv@vostro.rjw.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo noted that the description of clocks_calc_max_nsecs()'s
50% safety margin was somewhat circular. So this patch tries
to improve the comment to better explain what we mean by the
50% safety margin and why we need it.
Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-20-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Xunlei Pang [Thu, 2 Apr 2015 03:34:38 +0000 (20:34 -0700)]
time, drivers/rtc: Don't bother with rtc_resume() for the nonstop clocksource
If a system does not provide a persistent_clock(), the time
will be updated on resume by rtc_resume(). With the addition
of the non-stop clocksources for suspend timing, those systems
set the time on resume in timekeeping_resume(), but may not
provide a valid persistent_clock().
This results in the rtc_resume() logic thinking no one has set
the time and it then will over-write the suspend time again,
which is not necessary and only increases clock error.
So, fix this for rtc_resume().
This patch also improves the name of persistent_clock_exist to
make it more grammatical.
Xunlei Pang [Thu, 2 Apr 2015 03:34:37 +0000 (20:34 -0700)]
time: Fix a bug in timekeeping_suspend() with no persistent clock
When there's no persistent clock, normally
timekeeping_suspend_time should always be zero, but this can
break in timekeeping_suspend().
At T1, there was a system suspend, so old_delta was assigned T1.
After some time, one time adjustment happened, and xtime got the
value of T1-dt(0s<dt<2s). Then, there comes another system
suspend soon after this adjustment, obviously we will get a
small negative delta_delta, resulting in a negative
timekeeping_suspend_time.
This is problematic, when doing timekeeping_resume() if there is
no nonstop clocksource for example, it will hit the else leg and
inject the improper sleeptime which is the wrong logic.
So, we can solve this problem by only doing delta related code
when the persistent clock is existent. Actually the code only
makes sense for persistent clock cases.
Xunlei Pang [Thu, 2 Apr 2015 03:34:33 +0000 (20:34 -0700)]
drivers/rtc/mxc: Update driver to address y2038/y2106 issues
This driver has a number of y2038/y2106 issues.
This patch resolves them by:
- Replacing rtc_time_to_tm() with rtc_time64_to_tm()
- Replacing rtc_tm_to_time() with rtc_tm_to_time64()
- Changing mxc_rtc_set_mmss() to use rtc_class_ops's set_mmss64()
After this patch, the driver should not have any remaining
y2038/y2106 issues.
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-14-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Xunlei Pang [Thu, 2 Apr 2015 03:34:32 +0000 (20:34 -0700)]
drivers/rtc/mxc: Convert get_alarm_or_time()/set_alarm_or_time() to use time64_t
We want to convert mxc_rtc_set_mmss() to use rtc_class_ops's
set_mmss64(), but it uses get_alarm_or_time()/set_alarm_or_time()
internal interfaces which are y2038 unsafe.
So here as a separate patch, it converts these two internal
interfaces of "mxc" to use safe time64_t to make some
preparations.
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-13-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Xunlei Pang [Thu, 2 Apr 2015 03:34:29 +0000 (20:34 -0700)]
drivers/rtc/ab3100: Update driver to address y2038/y2106 issues
This driver has a number of y2038/y2106 issues.
This patch resolves them by:
- Replacing rtc_tm_to_time() with rtc_tm_to_time64()
- Replacing rtc_time_to_tm() with rtc_time64_to_tm()
- Changing ab3100_rtc_set_mmss() to use rtc_class_ops's set_mmss64()
After this patch, the driver should not have any remaining
y2038/y2106 issues.
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-10-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Xunlei Pang [Thu, 2 Apr 2015 03:34:26 +0000 (20:34 -0700)]
ARM, clocksource/drivers: Provide read_boot_clock64() and read_persistent_clock64() and use them
As part of addressing "y2038 problem" for in-kernel uses, this
patch converts read_boot_clock() to read_boot_clock64() and
read_persistent_clock() to read_persistent_clock64() using
timespec64 by converting clock_access_fn to use timespec64.
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> (for tegra part) Cc: Russell King <rmk@dyn-67.arm.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-7-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Xunlei Pang [Thu, 2 Apr 2015 03:34:23 +0000 (20:34 -0700)]
time: Add y2038 safe update_persistent_clock64()
As part of addressing in-kernel y2038 issues, this patch adds
update_persistent_clock64() and replaces all the call sites of
update_persistent_clock() with this function. This is a __weak
implementation, which simply calls the existing y2038 unsafe
update_persistent_clock().
This allows architecture specific implementations to be
converted independently, and eventually y2038-unsafe
update_persistent_clock() can be removed after all its
architecture specific implementations have been converted to
update_persistent_clock64().
Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-4-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>