Currently, helpers that read and write from/to the stack can do so using
a pair of arguments of type ARG_PTR_TO_STACK and ARG_CONST_STACK_SIZE.
ARG_CONST_STACK_SIZE accepts a constant register of type CONST_IMM, so
that the verifier can safely check the memory access. However, requiring
the argument to be a constant can be limiting in some circumstances.
Since the current logic keeps track of the minimum and maximum value of
a register throughout the simulated execution, ARG_CONST_STACK_SIZE can
be changed to also accept an UNKNOWN_VALUE register in case its
boundaries have been set and the range doesn't cause invalid memory
accesses.
One common situation when this is useful:
int len;
char buf[BUFSIZE]; /* BUFSIZE is 128 */
if (some_condition)
len = 42;
else
len = 84;
some_helper(..., buf, len & (BUFSIZE - 1));
The compiler can often decide to assign the constant values 42 or 48
into a variable on the stack, instead of keeping it in a register. When
the variable is then read back from stack into the register in order to
be passed to the helper, the verifier will not be able to recognize the
register as constant (the verifier is not currently tracking all
constant writes into memory), and the program won't be valid.
However, by allowing the helper to accept an UNKNOWN_VALUE register,
this program will work because the bitwise AND operation will set the
range of possible values for the UNKNOWN_VALUE register to [0, BUFSIZE),
so the verifier can guarantee the helper call will be safe (assuming the
argument is of type ARG_CONST_STACK_SIZE_OR_ZERO, otherwise one more
check against 0 would be needed). Custom ranges can be set not only with
ALU operations, but also by explicitly comparing the UNKNOWN_VALUE
register with constants.
Another very common example happens when intercepting system call
arguments and accessing user-provided data of variable size using
bpf_probe_read(). One can load at runtime the user-provided length in an
UNKNOWN_VALUE register, and then read that exact amount of data up to a
compile-time determined limit in order to fit into the proper local
storage allocated on the stack, without having to guess a suboptimal
access size at compile time.
Also, in case the helpers accepting the UNKNOWN_VALUE register operate
in raw mode, disable the raw mode so that the program is required to
initialize all memory, since there is no guarantee the helper will fill
it completely, leaving possibilities for data leak (just relevant when
the memory used by the helper is the stack, not when using a pointer to
map element value or packet). In other words, ARG_PTR_TO_RAW_STACK will
be treated as ARG_PTR_TO_STACK.
Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
commit 484611357c19 ("bpf: allow access into map value arrays")
introduces the ability to do pointer math inside a map element value via
the PTR_TO_MAP_VALUE_ADJ register type.
The current support doesn't handle the case where a PTR_TO_MAP_VALUE_ADJ
is spilled into the stack, limiting several use cases, especially when
generating bpf code from a compiler.
Handle this case by explicitly enabling the register type
PTR_TO_MAP_VALUE_ADJ to be spilled. Also, make sure that min_value and
max_value are reset just for BPF_LDX operations that don't result in a
restore of a spilled register from stack.
Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Enable helpers to directly access a map element value by passing a
register type PTR_TO_MAP_VALUE (or PTR_TO_MAP_VALUE_ADJ) to helper
arguments ARG_PTR_TO_STACK or ARG_PTR_TO_RAW_STACK.
This enables several use cases. For example, a typical tracing program
might want to capture pathnames passed to sys_open() with:
/* consume data.pathname, for example via
* bpf_trace_printk() or bpf_perf_event_output()
*/
}
Such a program could easily hit the stack limit in case PATHLEN needs to
be large or more local variables need to exist, both of which are quite
common scenarios. Allowing direct helper access to map element values,
one could do:
SEC("kprobe/sys_open")
int bpf_sys_open(struct pt_regs *ctx)
{
int id = 0;
struct trace_data *p = bpf_map_lookup_elem(&scratch_map, &id);
if (!p)
return;
bpf_probe_read(p->pathname, sizeof(p->pathname), ctx->di);
/* consume p->pathname, for example via
* bpf_trace_printk() or bpf_perf_event_output()
*/
}
And wouldn't risk exhausting the stack.
Code changes are loosely modeled after commit 6841de8b0d03 ("bpf: allow
helpers access the packet directly"). Unlike with PTR_TO_PACKET, these
changes just work with ARG_PTR_TO_STACK and ARG_PTR_TO_RAW_STACK (not
ARG_PTR_TO_MAP_KEY, ARG_PTR_TO_MAP_VALUE, ...): adding those would be
trivial, but since there is not currently a use case for that, it's
reasonable to limit the set of changes.
Also, add new tests to make sure accesses to map element values from
helpers never go out of boundary, even when adjusted.
Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Move the logic to check memory accesses to a PTR_TO_MAP_VALUE_ADJ from
check_mem_access() to a separate helper check_map_access_adj(). This
enables to use those checks in other parts of the verifier as well,
where boundaries on PTR_TO_MAP_VALUE_ADJ might need to be checked, for
example when checking helper function arguments. The same thing is
already happening for other types such as PTR_TO_PACKET and its
check_packet_access() helper.
The code has been copied verbatim, with the only difference of removing
the "off += reg->max_value" statement and moving the sum into the call
statement to check_map_access(), as that was only needed due to the
earlier common check_map_access() call.
Signed-off-by: Gianluca Borello <g.borello@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
here is now V4 of the SMC-R patches having processed your feedback from end
of November. The most important change is the replacement of sysfs by a
generic netlink solution in patch 04. And I tried to get rid of the __packed
attributes. There are still a few usages left due to SMC-R protocol defined
structures.
V4 changes:
The order of patches 03 and 04 for pnet table management and SMC IB-client
establishing has been exchanged, since pnet table management is now built on
top of smc_ib_devices.
Patch 01: Use EXPORT_SYMBOL_GPL().
Patch 02: Define "use_fallback" as bool.
Get rid of useless smc_sock fields clearing in smc_sock_alloc(),
since sk_alloc() clears out the memory.
Patch 03: Postpone smc_ib_remember_port_attr() call till ib_device is
mentioned in the pnet table.
Patch 04: Replace sysfs-usage by a generic netlink approach for pnet table
configuration.
Change layout of pnet table entries to reference net_device and
ib_device instead of dealing with names of net_devices and
ib_devices.
Patch 05: Adapt "use_fallback" usages to new type bool.
Get rid of useless smc_sock fields clearing in smc_sock_alloc()
Avoid __packed where possible.
Check if clc responses are not too big.
Patch 09: Postpone smc_setup_per_ibdev till the first connection with this
ib_device is really created.
Patch 11: Get rid of __packed usage.
V3 changes:
Patch 05: Remove unneeded DEFINE_WAIT
Patch 06: Improve synchronization of link group creation
Patch 07: Rename peer_rmbe_len into peer_rmbe_size to be more consistent
Patch 09: Avoid calls of ib_get_memory_region with IB_ACCESS_LOCAL_WRITE,
use new default local_dma_lkey from protection domain as lkey
instead.
Remove no longer needed function smc_ib_dereg_memory_region().
Patch 14: Switch to state ACTIVE only if still in state INIT.
Return 0 for recvmsg invoked in a socket closing state.
Allow getname call in state APPCLOSEWAIT1
Do not trigger destruction of a socket-in-error queued in accept
queue.
During cleanup of accept queue, make sure sockets are destructed,
and sockets in fallback mode are handled appropriately.
When freeing sndbufs/rmbs, remove them from their list and free
the entry.
Use add_wait_queue() and remove_wait_queue() in close wait
functions.
If actively closing a socket in state for PEERFINCLOSEWAIT, keep
this state.
If passively closing a socket while bytes are to be received, move
to state APPCLOSEWAIT1.
If actively aborting a socket, skip sending the close_abort flag,
since RDMA communication is no longer possible.
When terminating a link group, do not schedule link group freeing a
2nd time, since already done when unregistering the last remaining
connection.
Patch 15: Introduce smc_diag module for monitoring SMC protocol sockets.
This replaces the old patch 0015 dealing with procfs.
V2 changes:
Patch 0002: Add SMC versions for family key strings in net/core/sock.c.
Patch 0006: initialize rb_tree.
Patch 0007: Get rid of unneeded use of xchg() in smc_sndbuf_unuse() and
smc_rmb_unuse().
Patch 0008: Correct error checking logic for ib_function calls.
Define struct smc_link field wr_tx_id as atomic_long_t.
Use "do_div" instead of "%" to be architecture-independent.
Patch 0009: Correct error checking logic for ib_function calls.
Patch 0011: Remove xchg() calls in cursor handling. Use atomic64_t for cursor
overlays on 64-bit architectures. If not available, use plain u64
and add locking for cursor reading and writing.
Implement smc_curs_add() without modulo operator "%".
Patch 0012: Remove xchg() calls in cursor handling.
Implement smc_tx_rdma_writes() without module operator "%".
Patch 0013: Remove xchg() calls in cursor handling.
Patch 0014: Return type bool in smc_wr_tx_has_pending().
Remove unneeded semicolon in smc_close_shutdown_write().
Call smc_close_active() in non-fallback case only.
Get rid of duplicate schedule of sock_put_work().
Take nested sock_lock in smc_listen_work().
Start close stream_wait in case of prepared sends only.
Patch 0015: Remove unneeded socket ref_count in smc_proc_seq_show().
Take lock before list_empty check in smc_proc_sock_list_del().
These patches are the initial part of the implementation of the
"Shared Memory Communications-RDMA" (SMC-R) protocol as defined in
RFC7609 [1]. While SMC-R does not aim to replace TCP,
it taps a wealth of existing data center TCP socket applications
to become more efficient without the need for rewriting them.
SMC-R uses RDMA over Converged Ethernet (RoCE) to save CPU consumption.
For instance, when running 10 parallel connections with uperf, we measured
a decrease of 60% in CPU consumption with SMC-R compared to TCP/IP
(with throughput and latency comparable;
measured on x86_64 with the same RoCE card and port).
SMC-R does not require an RDMA communication manager (RDMA CM).
SMC-R inherits TCP qualities such as reliable connections, host-based
firewall packet filtering (on connection establishment) and unmodified
application of communication encryption such as TLS (transport layer
security) or SSL (secure sockets layer). Since original TCP is used to
establish SMC-R connections, load balancers and packet inspection based
on TCP/IP connection establishment continue to work for SMC-R.
On the other hand, using SMC-R implies:
- either involving a preload library when invoking the unchanged TCP-application
or slightly modifying the source by simply changing the socket family in
the socket() call
- accepting extra overhead and latency in connection establishment due to
SMC Connection Layer Control (CLC) handshake
- explicit coupling of RoCE ports with Ethernet ports
- not routable as currently built on RoCE V1
- bypassing of packet-based networking features
- filtering (netfilter)
- sniffing (libpcap, packet sockets, (E)BPF)
- traffic control (scheduling, shaping)
- bypassing of IP-header based socket options
- bypassing of memory buffer (pressure) management
- unusable together with IPsec
Overview of the SMC-R Protocol described in informational RFC 7609
SMC-R is an open protocol that provides RDMA capabilities over RoCE
transparently for applications exploiting TCP sockets.
A new socket protocol family PF_SMC is introduced.
There are no changes required to applications using the sockets API for TCP
stream sockets other than the specification of the new socket family AF_SMC.
Unmodified applications can be used by means of a dynamic preload shared
library which rewrites the socket API call
socket(AF_INET, SOCK_STREAM, IPPROTO_TCP) into
socket(AF_SMC, SOCK_STREAM, IPPROTO_TCP).
SMC-R re-uses the address family AF_INET for all addressing purposes around
struct sockaddr.
A link group is determined by an ordered peer pair of TCP client and TCP server
(IP addresses and subnet). Reversed client server roles cause an own link group.
A link is a logical point-to-point connection based on an
infiniband reliable connected queue pair (RC-QP) between two RoCE ports
(MACs and GIDs) of a peer pair.
A link group can have 1..8 links for failover and load balancing.
This initial Linux implementation always has 1 link per link group.
Each link group on a peer can have 1..255 remote memory buffers (RMBs).
If more RMBs are needed, a peer can open another link group
(this initial Linux implementation) or fall back to TCP.
Each RMB has its own particular size and its own (R)DMA mapping and credentials
(rtoken consisting of rkey and RDMA "virtual address").
This initial Linux implementation uses physically contiguous memory for RMBs
but we are working towards scattered memory because of memory fragmentation.
Each RMB has 1..255 RMB elements (RMBEs) of equal size
to provide multiplexing of connections within an RMB.
An RMBE is the RDMA Write destination organized as wrapping ring buffer
for data transmit of a particular connection in one direction
(duplex by means of mirror symmetry as with TCP).
This initial Linux implementation always has 1 RMBE per RMB
and thus an individual RMB for each connection.
SMC-R connection establishment with subsequent data transfer:
CLIENT SERVER
TCP three-way handshake:
regular TCP SYN
-------------------------------------------------------->
regular TCP SYN ACK
<--------------------------------------------------------
regular TCP ACK
-------------------------------------------------------->
SMC Connection Layer Control (CLC) handshake
exchanges RDMA credentials between peers:
via above TCP connection: SMC CLC Proposal
-------------------------------------------------------->
via above TCP connection: SMC CLC Accept
<--------------------------------------------------------
via above TCP connection: SMC CLC Confirm
-------------------------------------------------------->
SMC Link Layer Control (LLC) (only once per link, i.e. 1st conn. of link group):
RoCE RC-QP: SMC LLC Confirm Link
<========================================================
RoCE RC-QP: SMC LLC Confirm Link response
========================================================>
SMC data transmission (incl. SMC Connection Data Control (CDC) message):
RoCE RC-QP: RDMA Write
========================================================>
RoCE RC-QP: SMC CDC message (flow control)
========================================================>
...
RoCE RC-QP: RDMA Write
<========================================================
RoCE RC-QP: SMC CDC message (flow control)
<========================================================
...
Data flow within an established connection:
+----------------------------------------------------------------------------
| SENDER
| sendmsg()
| |
| | produces into sndbuf [sender's process context]
| v
| +--------+
| | sndbuf | [ring buffer]
| +--------+
| |
| | consumes from sndbuf and produces into receiver's RMBE [any context]
| | by sending RDMA Write followed by SMC CDC message over RoCE RC-QP
| |
+----|-----------------------------------------------------------------------
|
+----|-----------------------------------------------------------------------
| v RECEIVER
| +------+
| | RMBE | [ring buffer, can have size different from sender's sndbuf]
| | | [RMBE represents rcvbuf, no further de-coupling as on sender side]
| +------+
| |
| | consumes from RMBE [receiver's process context]
| v
| recvmsg()
+----------------------------------------------------------------------------
Flow control ("cursor" updates) by means of SMC CDC messages:
SENDER RECEIVER
sends updates via CDC-------------+ sends updates via CDC
on consuming from sndbuf | on consuming from RMBE
and producing into RMBE | by means of recvmsg()
| |
| |
+-----------------------------------|------------+
| |
+--v-------------------------+ +--v-----------------------+
| receiver's consumer cursor | | sender's producer cursor----+
+----------------|-----------+ +--------------------------+ |
| |
| receiver's RMBE |
| +--------------------------+ |
| | | |
+--------------------------------+ | |
| | | |
| v | |
| +------------| |
|-------------+////////////| |
|//RDMA data written by////| |
|////sender that is////////| |
|/available to be consumed/| |
|///////// +---------------| |
|----------+^ | |
| | | |
| +-----------------+
| |
+--------------------------+
Sending updates of the producer cursor is immediate for low latency;
something like Nagle's algorithm (absence of TCP_NODELAY) is optional and
currently not part of this initial Linux implementation.
Sending updates of the consumer cursor is conditional to avoid the
silly window syndrome.
Normal connection termination:
Normal connection termination starts transitioning from socket state
ACTIVE via either "Active Close" or "Passive Close".
shutdown rdwr +-----------------+
or close, +-------------->| INIT / CLOSED |<-------------+
send PeerCon|nClosed +-----------------+ | PeerConnClosed
| | | received
| connection | established |
| V |
+----------------+ +-----------------+ +----------------+
|AppFinCloseWait | | ACTIVE | |PeerFinCloseWait|
+----------------+ +-----------------+ +----------------+
| | | |
| Active Close: | |Passive Close: |
| close or | |PeerConnClosed or |
| shutdown wr or| |PeerDoneWriting |
| shutdown rdwr | |received |
| V V |
PeerConnClo|sed +--------------+ +-------------+ | close or
received +--<----|PeerCloseWait1| |AppCloseWait1|--->----+ shutdown rdwr,
| +--------------+ +-------------+ | send
| PeerDoneWri|ting | shutdown wr, | PeerConnClosed
| received | send Pee|rDoneWriting |
| V V |
| +--------------+ +-------------+ |
+--<----|PeerCloseWait2| |AppCloseWait2|--->----+
+--------------+ +-------------+
In state CLOSED, the socket can be destructed only, once the application has
issued a close().
A PNET table in sysfs provides the mapping between network device names and
RoCE Infiniband device names for the transparent switch of data communication.
A PNET table can contain an arbitrary number of PNETIDs.
Each PNETID contains exactly one (Ethernet) network device name
and one or more RoCE Infiniband device names.
Each device name can only exist in at most one PNETID (no overlapping).
This initial Linux implementation allows at most one RoCE Infiniband device
name per PNETID.
After a new TCP connection is established, the network device name
used for egress traffic with the TCP connection's local source IP address
is used as key to lookup the unique PNETID, and the RoCE Infiniband device
of this PNETID is used to switch data communication from TCP to RDMA
during SMC CLC handshake.
Problem determination:
A protocol dissector is available with upstream wireshark for formatting
SMC-R related RoCE LAN traffic.
[https://code.wireshark.org/review/gitweb?p=wireshark.git;a=blob;f=epan/dissectors/packet-smcr.c]
We are working on enhancing the Linux implementation to cover:
- Improve default socket closing asynchronicity
- Address corner cases with many parallel connections
- Tracing
- Integrated load balancing and fail-over within a link group
- Splice and sendpage support
- IPv6 addressing support
- Keepalive, Cork
- Namespaces support
- Urgent data
- More socket options
- Diagnostics
- Statistics support
- SNMP support
Ursula Braun [Mon, 9 Jan 2017 15:55:19 +0000 (16:55 +0100)]
smc: work request (WR) base for use by LLC and CDC
The base containers for RDMA transport are work requests and completion
queue entries processed through Infiniband verbs:
* allocate and initialize these areas
* map these areas to DMA
* implement the basic communication consisting of work request posting
and receival of completion queue events
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Mon, 9 Jan 2017 15:55:18 +0000 (16:55 +0100)]
smc: remote memory buffers (RMBs)
* allocate data RMB memory for sending and receiving
* size depends on the maximum socket send and receive buffers
* allocated RMBs are kept during life time of the owning link group
* map the allocated RMBs to DMA
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Richter [Mon, 9 Jan 2017 15:55:15 +0000 (16:55 +0100)]
smc: establish pnet table management
Connection creation with SMC-R starts through an internal
TCP-connection. The Ethernet interface for this TCP-connection is not
restricted to the Ethernet interface of a RoCE device. Any existing
Ethernet interface belonging to the same physical net can be used, as
long as there is a defined relation between the Ethernet interface and
some RoCE devices. This relation is defined with the help of an
identification string called "Physical Net ID" or short "pnet ID".
Information about defined pnet IDs and their related Ethernet
interfaces and RoCE devices is stored in the SMC-R pnet table.
A pnet table entry consists of the identifying pnet ID and the
associated network and IB device.
This patch adds pnet table configuration support using the
generic netlink message interface referring to network and IB device
by their names. Commands exist to add, delete, and display pnet table
entries, and to flush or display the entire pnet table.
There are cross-checks to verify whether the ethernet interfaces
or infiniband devices really exist in the system. If either device
is not available, the pnet ID entry is not created.
Loss of network devices and IB devices is also monitored;
a pnet ID entry is removed when an associated network or
IB device is removed.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Mon, 9 Jan 2017 15:55:13 +0000 (16:55 +0100)]
smc: establish new socket family
* enable smc module loading and unloading
* register new socket family
* basic smc socket creation and deletion
* use backing TCP socket to run CLC (Connection Layer Control)
handshake of SMC protocol
* Setup for infiniband traffic is implemented in follow-on patches.
For now fallback to TCP socket is always used.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Utz Bacher <utz.bacher@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Mon, 9 Jan 2017 15:55:12 +0000 (16:55 +0100)]
net: introduce keepalive function in struct proto
Direct call of tcp_set_keepalive() function from protocol-agnostic
sock_setsockopt() function in net/core/sock.c violates network
layering. And newly introduced protocol (SMC-R) will need its own
keepalive function. Therefore, add "keepalive" function pointer
to "struct proto", and call it from sock_setsockopt() via this pointer.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Utz Bacher <utz.bacher@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 9 Jan 2017 20:55:18 +0000 (15:55 -0500)]
Merge branch 'sh_eth-wol'
Niklas Söderlund says:
====================
sh_eth: add wake-on-lan support via magic packet
This series adds support for Wake-on-Lan using Magic Packet for a few
models of the sh_eth driver. Patch 1/6 fix a naming error, patch 2/6
adds generic support to control and support WoL while patches 3/6 - 6/6
enable different models.
Based ontop of net-next master.
Changes since v2.
- Fix bookkeeping for "active_count" and "event_count" reported in
/sys/kernel/debug/wakeup_sources. Thanks Geert for noticing this.
- Add new patch 1/6 which corrects the name of ECMR_MPDE bit, suggested
by Sergei.
- s/sh7743/sh7734/ in patch 5/6. Thanks Geert for spotting this.
- Spelling improvements suggested by Sergei and Geert.
- Add Tested-by to 3/6 and 4/6.
Changes since v1.
- Split generic WoL functionality and device enablement to different
patches.
- Enable more devices then Gen2 after feedback from Geert and
datasheets.
- Do not set mdp->irq_enabled = false and remove specific MagicPacket
interrupt clearing, instead let sh_eth_error() clear the interrupt as
for other EMAC interrupts, thanks Sergei for the suggestion.
- Use the original return logic in sh_eth_resume().
- Moved sh_eth_private variable *clk to top of data structure to avoid
possible gaps due to alignment restrictions.
- Make wol_enabled in sh_eth_private part of the already existing
bitfield instead of a bool.
- Do not initiate mdp->wol_enabled to 0, the struct is kzalloc'ed so
it's already set to 0.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Geert Uytterhoeven reported WoL worked on his Armadillo board.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
sh_eth: add generic wake-on-lan support via magic packet
Add generic functionality to support Wake-on-LAN using MagicPacket which
are supported by at least a few versions of sh_eth. Only add
functionality for WoL, no specific sh_eth versions are marked to support
WoL yet.
WoL is enabled in the suspend callback by setting MagicPacket detection
and disabling all interrupts expect MagicPacket. In the resume path the
driver needs to reset the hardware to rearm the WoL logic, this prevents
the driver from simply restoring the registers and to take advantage of
that sh_eth was not suspended to reduce resume time. To reset the
hardware the driver closes and reopens the device just like it would do
in a normal suspend/resume scenario without WoL enabled, but it both
closes and opens the device in the resume callback since the device
needs to be open for WoL to work.
One quirk needed for WoL is that the module clock needs to be prevented
from being switched off by Runtime PM. To keep the clock alive the
suspend callback need to call clk_enable() directly to increase the
usage count of the clock. Then when Runtime PM decreases the clock usage
count it won't reach 0 and be switched off.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: David S. Miller <davem@davemloft.net>
This bit was wrongly named due to a typo, Sergei checked the SH7734/63
manuals and this bit should be named MPDE.
Suggested-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: David S. Miller <davem@davemloft.net>
This patchset is optimizing the ICMP-reply code path, for ICMP packets
that gets rate limited. A remote party can easily trigger this code
path by sending packets to port number with no listening service.
Generally the patchset moves the sysctl_icmp_msgs_per_sec ratelimit
checking to earlier in the code path and removes an allocation.
Use-case: The specific case I experienced this being a bottleneck is,
sending UDP packets to a port with no listener, which obviously result
in kernel replying with ICMP Destination Unreachable (type:3), Port
Unreachable (code:3), which cause the bottleneck.
After Eric and Paolo optimized the UDP socket code, the kernels PPS
processing capabilities is lower for no-listen ports, than normal UDP
sockets. This is bad for capacity planning when restarting a service.
UDP no-listen benchmark 8xCPUs using pktgen_sample04_many_flows.sh:
Baseline: 6.6 Mpps
Patch: 14.7 Mpps
Driver mlx5 at 50Gbit/s.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: for rate-limited ICMP replies save one atomic operation
It is possible to avoid the atomic operation in icmp{v6,}_xmit_lock,
by checking the sysctl_icmp_msgs_per_sec ratelimit before these calls,
as pointed out by Eric Dumazet, but the BH disabled state must be correct.
The icmp_global_allow() call states it must be called with BH
disabled. This protection was given by the calls icmp_xmit_lock and
icmpv6_xmit_lock. Thus, split out local_bh_disable/enable from these
functions and maintain it explicitly at callers.
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: reduce cycles spend on ICMP replies that gets rate limited
This patch split the global and per (inet)peer ICMP-reply limiter
code, and moves the global limit check to earlier in the packet
processing path. Thus, avoid spending cycles on ICMP replies that
gets limited/suppressed anyhow.
The global ICMP rate limiter icmp_global_allow() is a good solution,
it just happens too late in the process. The kernel goes through the
full route lookup (return path) for the ICMP message, before taking
the rate limit decision of not sending the ICMP reply.
Details: The kernels global rate limiter for ICMP messages got added
in commit 4cdf507d5452 ("icmp: add a global rate limitation"). It is
a token bucket limiter with a global lock. It brilliantly avoids
locking congestion by only updating when 20ms (HZ/50) were elapsed. It
can then avoids taking lock when credit is exhausted (when under
pressure) and time constraint for refill is not yet meet.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Revert "icmp: avoid allocating large struct on stack"
This reverts commit 9a99d4a50cb8 ("icmp: avoid allocating large struct
on stack"), because struct icmp_bxm no really a large struct, and
allocating and free of this small 112 bytes hurts performance.
Fixes: 9a99d4a50cb8 ("icmp: avoid allocating large struct on stack") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
These patches provide some tracepoints for AFS and fix a potential leak by
adding refcounting to the afs_call struct.
The patches are:
(1) Add some tracepoints for logging incoming calls and monitoring
notifications from AF_RXRPC and data reception.
(2) Get rid of afs_wait_mode as it didn't turn out to be as useful as
initially expected. It can be brought back later if needed. This
clears some stuff out that I don't then need to fix up in (4).
(3) Allow listen(..., 0) to be used to disable listening. This makes
shutting down the AFS cache manager server in the kernel much easier
and the accounting simpler as we can then be sure that (a) all
preallocated afs_call structs are relesed and (b) no new incoming
calls are going to be started.
For the moment, listening cannot be reenabled.
(4) Add refcounting to the afs_call struct to fix a potential multiple
release detected by static checking and add a tracepoint to follow the
lifecycle of afs_call objects.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: Encapsulate legacy switch drivers into dsa_switch_driver
In preparation for making struct dsa_switch_ops const, encapsulate it
within a dsa_switch_driver which has a list pointer and a pointer to
dsa_switch_ops. This allows us to take the list_head pointer out of
dsa_switch_ops, which is written to by {un,}register_switch_driver.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 9 Jan 2017 20:40:57 +0000 (15:40 -0500)]
Merge branch 'sh_eth-csum'
Sergei Shtylyov says:
====================
sh_eth: "intgelligent checksum" related cleanups
Here's a set of 2 patches against DaveM's 'net.git' repo, as they are based
on a couple patches merged there recently; however, the patches are destined
for 'net-next.git' (once 'net.git' gets merged there next time). I'm cleaning
up the "intelligent checksum" related code (however, the driver only disables
this feature for now, theres's no proper offload supprt yet).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Shtylyov [Fri, 6 Jan 2017 21:02:52 +0000 (00:02 +0300)]
sh_eth: get rid of 'sh_eth_cpu_data::shift_rd0'
After checking all the available manuals, I have enough information to
conclude that the 'shift_rd0' flag is only relevant for the Ether cores
supporting so called "intelligent checksum" (and hence having CSMR) which
is indicated by the 'hw_crc' flag. Since all the relevant SoCs now have
both these flags set, we can at last get rid of the former flag...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Zefir Kurtisi [Fri, 6 Jan 2017 11:14:48 +0000 (12:14 +0100)]
phy state machine: failsafe leave invalid RUNNING state
While in RUNNING state, phy_state_machine() checks for link changes by
comparing phydev->link before and after calling phy_read_status().
This works as long as it is guaranteed that phydev->link is never
changed outside the phy_state_machine().
If in some setups this happens, it causes the state machine to miss
a link loss and remain RUNNING despite phydev->link being 0.
This has been observed running a dsa setup with a process continuously
polling the link states over ethtool each second (SNMPD RFC-1213
agent). Disconnecting the link on a phy followed by a ETHTOOL_GSET
causes dsa_slave_get_settings() / dsa_slave_get_link_ksettings() to
call phy_read_status() and with that modify the link status - and
with that bricking the phy state machine.
This patch adds a fail-safe check while in RUNNING, which causes to
move to CHANGELINK when the link is gone and we are still RUNNING.
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1) Fix dumping of nft_quota entries, from Pablo Neira Ayuso.
2) Fix out of bounds access in nf_tables discovered by KASAN, from
Florian Westphal.
3) Fix IRQ enabling in dp83867 driver, from Grygorii Strashko.
4) Fix unicast filtering in be2net driver, from Ivan Vecera.
5) tg3_get_stats64() can race with driver close and ethtool
reconfigurations, fix from Michael Chan.
6) Fix error handling when pass limit is reached in bpf code gen on
x86. From Daniel Borkmann.
7) Don't clobber switch ops and use proper MDIO nested reads and writes
in bcm_sf2 driver, from Florian Fainelli.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits)
net: dsa: bcm_sf2: Utilize nested MDIO read/write
net: dsa: bcm_sf2: Do not clobber b53_switch_ops
net: stmmac: fix maxmtu assignment to be within valid range
bpf: change back to orig prog on too many passes
tg3: Fix race condition in tg3_get_stats64().
be2net: fix unicast list filling
be2net: fix accesses to unicast list
netlabel: add CALIPSO to the list of built-in protocols
vti6: fix device register to report IFLA_INFO_KIND
net: phy: dp83867: fix irq generation
amd-xgbe: Fix IRQ processing when running in single IRQ mode
sh_eth: R8A7740 supports packet shecksumming
sh_eth: fix EESIPR values for SH77{34|63}
r8169: fix the typo in the comment
nl80211: fix sched scan netlink socket owner destruction
bridge: netfilter: Fix dropping packets that moving through bridge interface
netfilter: ipt_CLUSTERIP: check duplicate config when initializing
netfilter: nft_payload: mangle ckecksum if NFT_PAYLOAD_L4CSUM_PSEUDOHDR is set
netfilter: nf_tables: fix oob access
netfilter: nft_queue: use raw_smp_processor_id()
...
David S. Miller [Mon, 9 Jan 2017 19:54:30 +0000 (14:54 -0500)]
Merge branch 'dwmac-dwc-qos-eth'
Joao Pinto says:
====================
adding new glue driver dwmac-dwc-qos-eth
This patch set contains the porting of the synopsys/dwc_eth_qos.c driver
to the stmmac structure. This operation resulted in the creation of a new
platform glue driver called dwmac-dwc-qos-eth which was based in the
dwc_eth_qos as is.
dwmac-dwc-qos-eth inherited dwc_eth_qos DT bindings, to assure that current
and old users can continue to use it as before. We can see this driver as
being deprecated, since all new development will be done in stmmac.
Please check each patch for implementation details.
====================
Tested-by: Niklas Cassel <niklas.cassel@axis.com> Reviewed-by: Lars Persson <larper@axis.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
jpinto [Mon, 9 Jan 2017 12:35:10 +0000 (12:35 +0000)]
stmmac: adding new glue driver dwmac-dwc-qos-eth
This patch adds a new glue driver called dwmac-dwc-qos-eth which
was based in the dwc_eth_qos as is. To assure retro-compatibility a slight
tweak was also added to stmmac_platform.
Signed-off-by: Joao Pinto <jpinto@synopsys.com> Tested-by: Niklas Cassel <niklas.cassel@axis.com> Reviewed-by: Lars Persson <larper@axis.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
jpinto [Mon, 9 Jan 2017 12:35:09 +0000 (12:35 +0000)]
stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure
This patch moves stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to the
plat_stmmacenet_data structure. It also moves these platform variables
initialization to stmmac_platform. This was done for two reasons:
a) If PCI is used, platform related code is being executed in stmmac_main
resulting in warnings that have no sense and conceptually was not right
b) stmmac as a synopsys reference ethernet driver stack will be hosting
more and more drivers to its structure like synopsys/dwc_eth_qos.c.
These drivers have their own DT bindings that are not compatible with
stmmac's. One of the most important are the clock names, and so they need
to be parsed in the glue logic and initialized there, and that is the main
reason why the clocks were passed to the platform structure.
Signed-off-by: Joao Pinto <jpinto@synopsys.com> Tested-by: Niklas Cassel <niklas.cassel@axis.com> Reviewed-by: Lars Persson <larper@axis.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
jpinto [Mon, 9 Jan 2017 12:35:08 +0000 (12:35 +0000)]
stmmac: adding DT parameter for LPI tx clock gating
This patch adds a new parameter to the stmmac DT: snps,en-tx-lpi-clockgating.
It was ported from synopsys/dwc_eth_qos.c and it is useful if lpi tx clock
gating is needed by stmmac users also.
Signed-off-by: Joao Pinto <jpinto@synopsys.com> Tested-by: Niklas Cassel <niklas.cassel@axis.com> Reviewed-by: Lars Persson <larper@axis.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Regnery [Mon, 9 Jan 2017 12:15:55 +0000 (13:15 +0100)]
alx: add feature flag for rx checksumming
The code to handle rx checksumming was in the driver since its introduction
but for reasons unknown the feature flag was left out. Now it is possible
to enable this feature with ethtool.
Tested on my AR8161 ethernet card, there are no regressions observed in
netperf if this feature is enabled.
Signed-off-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 9 Jan 2017 19:36:58 +0000 (14:36 -0500)]
Merge branch 'act_csum-sctp'
Davide Caratti says:
====================
net/sched: act_csum: add support for SCTP checksum
This series extends current act_csum functionality to allow computation of
SCTP checksums. Patch 1 ensures LIBCRC32C will be selected if NET_ACT_CSUM
is selected. Patch 2 extends act_csum to handle IPPROTO_SCTP protocol in
IPv4/IPv6 header, and eventually compute the CRC32c value.
v2:
- style fix in tc_csum.h
- avoid nested if statement in act_csum.c
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yotam Gigi [Mon, 9 Jan 2017 10:25:46 +0000 (11:25 +0100)]
mlxsw: spectrum: Make the add_matchall_tc_entry symmetric
Currently, the mlxsw spectrum driver only supports offloading the matchall
classifier together with the mirred action. To allow more matchall tc
offloads, make the code symmetric so that it can be easily extended later
on for other actions.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Elad Raz [Mon, 9 Jan 2017 10:25:45 +0000 (11:25 +0100)]
mlxsw: cmd: Fix API name comments for event-queues
Probably some copy-paste error from "int_msix" that caused "int_" prefix to
appear in the comments for all "eq_" APIs.
Signed-off-by: Elad Raz <eladr@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Khoronzhuk [Sun, 8 Jan 2017 20:12:27 +0000 (22:12 +0200)]
net: ethernet: ti: cpsw: extend limits for cpsw_get/set_ringparam
Allow to set number of descs close to possible values. In case of
minimum limit it's equal to number of channels to be able to set
at least one desc per channel. For maximum limit leave enough descs
number for tx channels.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 9 Jan 2017 18:58:58 +0000 (13:58 -0500)]
Merge branch 'siphash'
Jason A. Donenfeld says:
====================
Introduce The SipHash PRF
This patch series introduces SipHash into the kernel. SipHash is a
cryptographically secure PRF, which serves a variety of functions, and is
introduced in patch #1. The following patch #2 introduces HalfSipHash,
an optimization suitable for hash tables only. Finally, the last two patches
in this series show two usages of the introduced siphash function family.
It is expected that after this initial introduction, other usages will follow.
Please read the extensive descriptions in patch #1 and patch #2 of what these
functions do and the various levels of assurances. They're products of intense
cryptographic research, and I believe they're suitable for the uses outlined
herein.
The use of SipHash is not limited to the networking subsystem -- indeed I
would like to use it in other places too in the kernel. But after discussing
with a few on this list and at Linus' suggestion, the initial import of these
functions is coming through the networking tree. After these are merged, it
will then be easier to expand use elsewhere.
Changes v2->v3:
- hsiphash keys now simply use an unsigned long, in order to avoid
a cluttered ifdef and make it a bit more clear what's happening.
- A typo in the documentation has been fixed.
- The documentation has been augmented with an example relating to struct
packing and passing.
- The net_secret variable is now __read_mostly.
Hopefully this is the last of the required revisions, and v3 can be merged
into net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
SHA1 is slower and less secure than SipHash, and so replacing syncookie
generation with SipHash makes natural sense. Some BSDs have been doing
this for several years in fact.
The speedup should be similar -- and even more impressive -- to the
speedup from the sequence number fix in this series.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
This gives a clear speed and security improvement. Siphash is both
faster and is more solid crypto than the aging MD5.
Rather than manually filling MD5 buffers, for IPv6, we simply create
a layout by a simple anonymous struct, for which gcc generates
rather efficient code. For IPv4, we pass the values directly to the
short input convenience functions.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Miller <davem@davemloft.net> Cc: David Laight <David.Laight@aculab.com> Cc: Tom Herbert <tom@herbertland.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
HalfSipHash, or hsiphash, is a shortened version of SipHash, which
generates 32-bit outputs using a weaker 64-bit key. It has *much* lower
security margins, and shouldn't be used for anything too sensitive, but
it could be used as a hashtable key function replacement, if the output
is never exposed, and if the security requirement is not too high.
The goal is to make this something that performance-critical jhash users
would be willing to use.
On 64-bit machines, HalfSipHash1-3 is slower than SipHash1-3, so we alias
SipHash1-3 to HalfSipHash1-3 on those systems.
hsiphash() is roughly 3 times slower than jhash(), but comes with a
considerable security improvement.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
SipHash is a 64-bit keyed hash function that is actually a
cryptographically secure PRF, like HMAC. Except SipHash is super fast,
and is meant to be used as a hashtable keyed lookup function, or as a
general PRF for short input use cases, such as sequence numbers or RNG
chaining.
For the first usage:
There are a variety of attacks known as "hashtable poisoning" in which an
attacker forms some data such that the hash of that data will be the
same, and then preceeds to fill up all entries of a hashbucket. This is
a realistic and well-known denial-of-service vector. Currently
hashtables use jhash, which is fast but not secure, and some kind of
rotating key scheme (or none at all, which isn't good). SipHash is meant
as a replacement for jhash in these cases.
There are a modicum of places in the kernel that are vulnerable to
hashtable poisoning attacks, either via userspace vectors or network
vectors, and there's not a reliable mechanism inside the kernel at the
moment to fix it. The first step toward fixing these issues is actually
getting a secure primitive into the kernel for developers to use. Then
we can, bit by bit, port things over to it as deemed appropriate.
While SipHash is extremely fast for a cryptographically secure function,
it is likely a bit slower than the insecure jhash, and so replacements
will be evaluated on a case-by-case basis based on whether or not the
difference in speed is negligible and whether or not the current jhash usage
poses a real security risk.
For the second usage:
A few places in the kernel are using MD5 or SHA1 for creating secure
sequence numbers, syn cookies, port numbers, or fast random numbers.
SipHash is a faster and more fitting, and more secure replacement for MD5
in those situations. Replacing MD5 and SHA1 with SipHash for these uses is
obvious and straight-forward, and so is submitted along with this patch
series. There shouldn't be much of a debate over its efficacy.
Dozens of languages are already using this internally for their hash
tables and PRFs. Some of the BSDs already use this in their kernels.
SipHash is a widely known high-speed solution to a widely known set of
problems, and it's time we catch-up.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: David Laight <David.Laight@aculab.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Sun, 8 Jan 2017 04:04:23 +0000 (20:04 -0800)]
net: ipv4: remove disable of bottom half in inet_rtm_getroute
Nothing about the route lookup requires bottom half to be disabled.
Remove the local_bh_disable ... local_bh_enable around ip_route_input.
This appears to be a vestige of days gone by as it has been there
since the beginning of git time.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
due to the reply being sent before we access the server it points to. The
act of sending the reply causes the call to be freed if an error occurs
(but not if it doesn't).
On top of this, the lifetime handling of afs_call structs is fragile
because they get passed around through workqueues without any sort of
refcounting.
Deal with the issues by:
(1) Fix the maybe/maybe not nature of the reply sending functions with
regards to whether they release the call struct.
(2) Refcount the afs_call struct and sort out places that need to get/put
references.
(3) Pass a ref through the work queue and release (or pass on) that ref in
the work function. Care has to be taken because a work queue may
already own a ref to the call.
(4) Do the cleaning up in the put function only.
(5) Simplify module cleanup by always incrementing afs_outstanding_calls
whenever a call is allocated.
(6) Set the backlog to 0 with kernel_listen() at the beginning of the
process of closing the socket to prevent new incoming calls from
occurring and to remove the contribution of preallocated calls from
afs_outstanding_calls before we wait on it.
A tracepoint is also added to monitor the afs_call refcount and lifetime.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com> Fixes: 08e0e7c82eea: "[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC."
David Howells [Thu, 5 Jan 2017 10:38:36 +0000 (10:38 +0000)]
rxrpc: Allow listen(sock, 0) to be used to disable listening
Allow listen() with a backlog of 0 to be used to disable listening on an
AF_RXRPC socket. This also releases any preallocation, thereby making it
easier for a kernel service to account for all allocated call structures
when shutting down the service.
The socket cannot thereafter have listening reenabled, but must rather be
closed and reopened.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 5 Jan 2017 10:38:36 +0000 (10:38 +0000)]
afs: Kill afs_wait_mode
The afs_wait_mode struct isn't really necessary. Client calls only use one
of a choice of two (synchronous or the asynchronous) and incoming calls
don't use the wait at all. Replace with a boolean parameter.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Thu, 5 Jan 2017 10:38:34 +0000 (10:38 +0000)]
afs: Add some tracepoints
Add three tracepoints to the AFS filesystem:
(1) The afs_recv_data tracepoint logs data segments that are extracted
from the data received from the peer through afs_extract_data().
(2) The afs_notify_call tracepoint logs notification from AF_RXRPC of data
coming in to an asynchronous call.
(3) The afs_cb_call tracepoint logs incoming calls that have had their
operation ID extracted and mapped into a supported cache manager
service call.
To make (3) work, the name strings in the afs_call_type struct objects have
to be annotated with __tracepoint_string. This is done with the CM_NAME()
macro.
Further, the AFS call state enum needs a name so that it can be used to
declare parameter types.
Signed-off-by: David Howells <dhowells@redhat.com>
We make the bcm_sf2 driver override ds->ops which points to
b53_switch_ops since b53_switch_alloc() did the assignent. This is all
well and good until a second b53 switch comes in, and ends up using the
bcm_sf2 operations. Make a proper local copy, substitute the ds->ops
pointer and then override the operations.
Fixes: f458995b9ad8 ("net: dsa: bcm_sf2: Utilize core B53 driver when possible") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 9 Jan 2017 01:59:03 +0000 (20:59 -0500)]
Merge branch 'tc-skb-diet'
Willem de Bruijn says:
====================
convert tc_verd to integer bitfields
The skb tc_verd field takes up two bytes but uses far fewer bits.
Convert the remaining use cases to bitfields that fit in existing
holes (depending on config options) and potentially save the two
bytes in struct sk_buff.
This patchset is based on an earlier set by Florian Westphal and its
discussion (http://www.spinics.net/lists/netdev/msg329181.html).
Patches 1 and 2 are low hanging fruit: removing the last traces of
data that are no longer stored in tc_verd.
Patches 3 and 4 convert tc_verd to individual bitfields (5 bits).
Patch 5 reduces TC_AT to a single bitfield,
as AT_STACK is not valid here (unlike in the case of TC_FROM).
Patch 6 changes TC_FROM to two bitfields with clearly defined purpose.
It may be possible to reduce storage further after this initial round.
If tc_skip_classify is set only by IFB, testing skb_iif may suffice.
The L2 header pushing/popping logic can perhaps be shared with
AF_PACKET, which currently not pkt_type for the same purpose.
Changes:
RFC -> v1
- (patch 3): remove no longer needed label in tfc_action_exec
- (patch 5): set tc_at_ingress at the same points as existing
SET_TC_AT calls
Tested ingress mirred + netem + ifb:
ip link set dev ifb0 up
tc qdisc add dev eth0 ingress
tc filter add dev eth0 parent ffff: \
u32 match ip dport 8000 0xffff \
action mirred egress redirect dev ifb0
tc qdisc add dev ifb0 root netem delay 1000ms
nc -u -l 8000 &
ssh $otherhost nc -u $host 8000
Tested egress mirred:
ip link add veth1 type veth peer name veth2
ip link set dev veth1 up
ip link set dev veth2 up
tcpdump -n -i veth2 udp and dst port 8000 &
tc qdisc add dev eth0 root handle 1: prio
tc filter add dev eth0 parent 1:0 \
u32 match ip dport 8000 0xffff \
action mirred egress redirect dev veth1
tc qdisc add dev veth1 root netem delay 1000ms
nc -u $otherhost 8000
Tested ingress mirred:
ip link add veth1 type veth peer name veth2
ip link add veth3 type veth peer name veth4
ip netns add ns0
ip netns add ns1
for i in 1 2 3 4; do \
NS=ns$((${i}%2)); \
ip link set dev veth${i} netns ${NS}; \
ip netns exec ${NS} \
ip addr add dev veth${i} 192.168.1.${i}/24; \
ip netns exec ${NS} \
ip link set dev veth${i} up; \
done
ip netns exec ns0 tc qdisc add dev veth2 ingress
ip netns exec ns0 \
tc filter add dev veth2 parent ffff: \
u32 match ip dport 8000 0xffff \
action mirred ingress redirect dev veth4
ip netns exec ns0 \
tcpdump -n -i veth4 udp and dst port 8000 &
ip netns exec ns1 \
nc -u 192.168.1.2 8000
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net-tc: convert tc_from to tc_from_ingress and tc_redirected
The tc_from field fulfills two roles. It encodes whether a packet was
redirected by an act_mirred device and, if so, whether act_mirred was
called on ingress or egress. Split it into separate fields.
The information is needed by the special IFB loop, where packets are
taken out of the normal path by act_mirred, forwarded to IFB, then
reinjected at their original location (ingress or egress) by IFB.
The IFB device cannot use skb->tc_at_ingress, because that may have
been overwritten as the packet travels from act_mirred to ifb_xmit,
when it passes through tc_classify on the IFB egress path. Cache this
value in skb->tc_from_ingress.
That field is valid only if a packet arriving at ifb_xmit came from
act_mirred. Other packets can be crafted to reach ifb_xmit. These
must be dropped. Set tc_redirected on redirection and drop all packets
that do not have this bit set.
Both fields are set only on cloned skbs in tc actions, so original
packet sources do not have to clear the bit when reusing packets
(notably, pktgen and octeon).
Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Extract the remaining two fields from tc_verd and remove the __u16
completely. TC_AT and TC_FROM are converted to equivalent two-bit
integer fields tc_at and tc_from. Where possible, use existing
helper skb_at_tc_ingress when reading tc_at. Introduce helper
skb_reset_tc to clear fields.
Not documenting tc_from and tc_at, because they will be replaced
with single bit fields in follow-on patches.
Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Packets sent by the IFB device skip subsequent tc classification.
A single bit governs this state. Move it out of tc_verd in
anticipation of removing that __u16 completely.
The new bitfield tc_skip_classify temporarily uses one bit of a
hole, until tc_verd is removed completely in a follow-up patch.
Remove the bit hole comment. It could be 2, 3, 4 or 5 bits long.
With that many options, little value in documenting it.
Introduce a helper function to deduplicate the logic in the two
sites that check this bit.
The field tc_skip_classify is set only in IFB on skbs cloned in
act_mirred, so original packet sources do not have to clear the
bit when reusing packets (notably, pktgen and octeon).
Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: stmmac: fix maxmtu assignment to be within valid range
There is no checking valid value of maxmtu when getting it from
device tree. This resolution added the checking condition to
ensure the assignment is made within a valid range.
Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The network device operation for reading statistics is only called
in one place, and it ignores the return value. Having a structure
return value is potentially confusing because some future driver could
incorrectly assume that the return value was used.
Fix all drivers with ndo_get_stats64 to have a void function.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 8 Jan 2017 22:19:48 +0000 (17:19 -0500)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
100GbE Intel Wired LAN Driver Updates 2017-01-08
This series contains updates to fm10k only.
Ngai-Mint changes the driver to use the MAC pointer in the fm10k_mac_info
structure for fm10k_get_host_state_generic(). Fixed a race condition
where the mailbox interrupt request bits can be cleared before being
handled causing certain mailbox messages from the PF to be untreated
and the PF will enter in some inactive state.
Jake removes the typecast of u8 to char, and the extra variable that was
created for the typecast. Bumps the driver version. Added back the
receive descriptor timestamp value so that applications built on top
of the IES API can function properly. Cleaned up the debug statistics
flag, since debug statistics were removed and the flag was missed in
the removal.
Scott limits the DMA sync for CPU to the actual length of the packet,
instead of the entire buffer, since the DMA sync occurs every time a
packet is received.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Derek Chickles [Sat, 7 Jan 2017 01:16:12 +0000 (17:16 -0800)]
liquidio: simplify octeon_flush_iq()
Because every call to octeon_flush_iq() has a hardcoded 1 for the
pending_thresh argument, simplify that function by removing that argument.
This avoids one atomic read as well.
Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 6 Jan 2017 23:26:33 +0000 (00:26 +0100)]
bpf: change back to orig prog on too many passes
If after too many passes still no image could be emitted, then
swap back to the original program as we do in all other cases
and don't use the one with blinding.
Fixes: 959a75791603 ("bpf, x86: add support for constant blinding") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 8 Jan 2017 19:42:04 +0000 (11:42 -0800)]
Merge tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a bunch of USB fixes for 4.10-rc3. Yeah, it's a lot, an
artifact of the holiday break I think.
Lots of gadget and the usual XHCI fixups for reported issues (one day
that driver will calm down...) Also included are a bunch of usb-serial
driver fixes, and for good measure, a number of much-reported MUSB
driver issues have finally been resolved.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (72 commits)
USB: fix problems with duplicate endpoint addresses
usb: ohci-at91: use descriptor-based gpio APIs correctly
usb: storage: unusual_uas: Add JMicron JMS56x to unusual device
usb: hub: Move hub_port_disable() to fix warning if PM is disabled
usb: musb: blackfin: add bfin_fifo_offset in bfin_ops
usb: musb: fix compilation warning on unused function
usb: musb: Fix trying to free already-free IRQ 4
usb: musb: dsps: implement clear_ep_rxintr() callback
usb: musb: core: add clear_ep_rxintr() to musb_platform_ops
USB: serial: ti_usb_3410_5052: fix NULL-deref at open
USB: serial: spcp8x5: fix NULL-deref at open
USB: serial: quatech2: fix sleep-while-atomic in close
USB: serial: pl2303: fix NULL-deref at open
USB: serial: oti6858: fix NULL-deref at open
USB: serial: omninet: fix NULL-derefs at open and disconnect
USB: serial: mos7840: fix misleading interrupt-URB comment
USB: serial: mos7840: remove unused write URB
USB: serial: mos7840: fix NULL-deref at open
USB: serial: mos7720: remove obsolete port initialisation
USB: serial: mos7720: fix parallel probe
...
Linus Torvalds [Sun, 8 Jan 2017 19:37:44 +0000 (11:37 -0800)]
Merge tag 'char-misc-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are a few small char/misc driver fixes for 4.10-rc3.
Two MEI driver fixes, and three NVMEM patches for reported issues, and
a new Hyper-V driver MAINTAINER update. Nothing major at all, all have
been in linux-next with no reported issues"
* tag 'char-misc-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
hyper-v: Add myself as additional MAINTAINER
nvmem: fix nvmem_cell_read() return type doc
nvmem: imx-ocotp: Fix wrong register size
nvmem: qfprom: Allow single byte accesses for read/write
mei: move write cb to completion on credentials failures
mei: bus: fix mei_cldev_enable KDoc
Linus Torvalds [Sun, 8 Jan 2017 19:22:00 +0000 (11:22 -0800)]
Merge tag 'staging-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are some staging and IIO driver fixes for 4.10-rc3.
Most of these are minor IIO fixes of reported issues, along with one
network driver fix to resolve an issue. And a MAINTAINERS update with
a new mailing list. All of these, except the MAINTAINERS file update,
have been in linux-next with no reported issues (the MAINTAINERS patch
happened on Friday...)"
* tag 'staging-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
MAINTAINERS: add greybus subsystem mailing list
staging: octeon: Call SET_NETDEV_DEV()
iio: accel: st_accel: fix LIS3LV02 reading and scaling
iio: common: st_sensors: fix channel data parsing
iio: max44000: correct value in illuminance_integration_time_available
iio: adc: TI_AM335X_ADC should depend on HAS_DMA
iio: bmi160: Fix time needed to sleep after command execution
iio: 104-quad-8: Fix active level mismatch for the preset enable option
iio: 104-quad-8: Fix off-by-one errors when addressing IOR
iio: 104-quad-8: Fix index control configuration
Jacob Keller [Fri, 18 Nov 2016 17:45:39 +0000 (09:45 -0800)]
fm10k: remove FM10K_FLAG_DEBUG_STATS
The debug statistics were removed due to complications with the ethtool
statistics API which are not possible to resolve without a new
statistics interface. The flag was left behind, but we no longer need
it.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Fri, 18 Nov 2016 17:45:38 +0000 (09:45 -0800)]
fm10k: report the receive timestamp in FM10K_CB(skb)->tstamp
This was accidentally removed when we defeatured the full 1588 Clock
support. We need to report the Rx descriptor timestamp value so that
applications built on top of the IES API can function properly.
Additionally, remove the FM10K_FLAG_RX_TS_ENABLED, as it is not used now
that 1588 functionality has been removed.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>