Deepak Sikri [Thu, 29 Nov 2012 03:18:45 +0000 (14:18 +1100)]
rtc: rtc-spear: Provide flag for no support of UIE mode
The applications can set the RTC hardware to trigger interrupts in one
of three modes:
* AIE: Alarm interrupt
* UIE: Update interrupt (ie: once per second)
* PIE: Periodic interrupt (sub-second irqs)
The above defined 3 modes are to be supported in the RTC HW in form of
interrupts. The SPEAr RTC hardware does not support the later two modes.
There have been refinements in the RTC core in mainline related to
use of timer queue infrastructure to manage events in RTC. Please refer
the below mentioned patch for details:
* RTC: Rework RTC code to use timerqueue for events
* SHA ID: 6610e0893b8bc6f59b14fed7f089c5997f035f88
There have been provisions added to support hardware that do not have
support the UIE mode. Please refer the following patch.
* rtc: Provide flag for rtc devices that don't support UIE
* SHA ID: 4a649903f91232d02284d53724b0a45728111767
The patch makes use of the provision defined in the above patch to
update the hardware status of UIE mode.
Deepak Sikri [Thu, 29 Nov 2012 03:18:45 +0000 (14:18 +1100)]
rtc: rtc-spear: Add clk_{un}prepare() support
clk_{un}prepare is mandatory for platforms using common clock framework.
Because for SPEAr we don't do anything in clk_{un}prepare() calls, just
call them once in probe/remove.
Viresh Kumar [Thu, 29 Nov 2012 03:18:44 +0000 (14:18 +1100)]
rtc: rtc-spear: use devm_*() routines
Free the rtc-spear driver from tension of freeing resources :) devm_*
derivatives of multiple routines are used while allocating resources,
which would be freed automatically by kernel.
In case of error, test_init() needs to call platform_device_del() instead
of platform_device_unregister(). Otherwise, we may call
platform_device_put() twice.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Roland Stigge [Thu, 29 Nov 2012 03:18:42 +0000 (14:18 +1100)]
drivers/rtc/rtc-imxdi: support for i.MX53
Enable support for i.MX53 in addition to i.MX25 by enabling the driver on
ARCH_MXC generally.
Signed-off-by: Roland Stigge <stigge@antcom.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vaibhav Hiremath [Thu, 29 Nov 2012 03:18:42 +0000 (14:18 +1100)]
rtc: omap: add runtime pm support
OMAP1 RTC driver is used in multiple devices like, OMAPL138 and AM33XX.
Driver currently doesn't handle any clocks, which may be right for OMAP1
architecture but in case of AM33XX, the clock/module needs to be enabled
in order to access the registers.
So convert this driver to runtime pm, which internally handles rest.
[afzal@ti.com: handle error path] Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Afzal Mohammed [Thu, 29 Nov 2012 03:18:42 +0000 (14:18 +1100)]
rtc: omap: depend on am33xx
rtc-omap driver can be reused for AM33xx RTC. Provide dependency in
Kconfig.
Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Afzal Mohammed [Thu, 29 Nov 2012 03:18:42 +0000 (14:18 +1100)]
rtc: omap: dt support
Enhance rtc-omap driver with DT capability
Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Afzal Mohammed [Thu, 29 Nov 2012 03:18:41 +0000 (14:18 +1100)]
ARM: davinci: remove rtc kicker release
rtc-omap driver is now capable of handling kicker mechanism, hence remove
kicker handling at platform level, instead provide proper device name so
that driver can handle kicker mechanism by itself
Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Afzal Mohammed [Thu, 29 Nov 2012 03:18:41 +0000 (14:18 +1100)]
rtc: omap: kicker mechanism support
OMAP RTC IP can have kicker feature. This prevents spurious writes to
register. To write to registers kicker lock has to be released.
Procedure to do it as follows,
1. write to kick0 register, 0x83e70b13
2. write to kick1 register, 0x95a4f1e0
Writing value other than 0x83e70b13 to kick0 enables write locking, more
details about kicker mechanism can be found in section 20.3.3.5.3 of
AM335X TRM @www.ti.com/am335x
Here id table information is added and is used to distinguish those that
require kicker handling and the ones that doesn't need it. There are more
features in the newer IP's compared to legacy ones other than kicker,
which driver currently doesn't handle, supporting additional features
would be easier with the addition of id table.
Older IP (of OMAP1) doesn't have revision register as per TRM, so revision
register can't be relied always to find features, hence id table is being
used.
While at it, replace __raw_writeb/__raw_readb with writeb/readb; this
driver is used on ARMv7 (AM335X SoC)
Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We observed this problem has been occurring since 2.6.30 with
fs/binfmt_elf.c: create_elf_tables()->get_random_bytes(), introduced by f06295b44c296c8f ("ELF: implement AT_RANDOM for glibc PRNG seeding").
/*
* Generate 16 random bytes for userspace PRNG seeding.
*/
get_random_bytes(k_rand_bytes, sizeof(k_rand_bytes));
The patch introduces a wrapper around get_random_int() which has lower
overhead than calling get_random_bytes() directly.
With this patch applied:
$ cat /proc/sys/kernel/random/entropy_avail
2731
$ cat /proc/sys/kernel/random/entropy_avail
2802
$ cat /proc/sys/kernel/random/entropy_avail
2878
Analyzed by John Sobecki.
Signed-off-by: Jie Liu <jeff.liu@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <aedilger@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Arnd Bergmann <arnn@arndb.de> Cc: John Sobecki <john.sobecki@oracle.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alan Cox [Thu, 29 Nov 2012 03:18:40 +0000 (14:18 +1100)]
binfmt_elf: fix corner case kfree of uninitialized data
If elf_core_dump() is called and fill_note_info() fails in the kmalloc()
then it returns 0 but has not yet initialised all the needed fields. As a
result we do a kfree(randomness) after correctly skipping the thread data.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Paton J. Lewis [Thu, 29 Nov 2012 03:18:40 +0000 (14:18 +1100)]
epoll: support for disabling items, and a self-test app
It is not currently possible to reliably delete epoll items when using the
same epoll set from multiple threads. After calling epoll_ctl with
EPOLL_CTL_DEL, another thread might still be executing code related to an
event for that epoll item (in response to epoll_wait). Therefore the
deleting thread does not know when it is safe to delete resources
pertaining to the associated epoll item because another thread might be
using those resources.
The deleting thread could wait an arbitrary amount of time after calling
epoll_ctl with EPOLL_CTL_DEL and before deleting the item, but this is
inefficient and could result in the destruction of resources before
another thread is done handling an event returned by epoll_wait.
This patch enhances epoll_ctl to support EPOLL_CTL_DISABLE, which disables
an epoll item. If epoll_ctl returns -EBUSY in this case, then another
thread may handling a return from epoll_wait for this item. Otherwise if
epoll_ctl returns 0, then it is safe to delete the epoll item. This
allows multiple threads to use a mutex to determine when it is safe to
delete an epoll item and its associated resources, which allows epoll
items to be deleted both efficiently and without error in a multi-threaded
environment. Note that EPOLL_CTL_DISABLE is only useful in conjunction
with EPOLLONESHOT, and using EPOLL_CTL_DISABLE on an epoll item without
EPOLLONESHOT returns -EINVAL.
This patch also adds a new test_epoll self-test program to both
demonstrate the need for this feature and test it.
Signed-off-by: Paton J. Lewis <palewis@adobe.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Holland <pholland@adobe.com> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Thu, 29 Nov 2012 03:18:39 +0000 (14:18 +1100)]
checkpatch: allow control over line length warning, default remains 80
Some projects might want a longer line length so allow a command line
--max-line-length=n control over the long line warnings. The default line
length is 80.
Signed-off-by: Joe Perches <joe@perches.com> Cc: Constantine Shulyupin <const@makelinux.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tao Ma [Thu, 29 Nov 2012 03:18:38 +0000 (14:18 +1100)]
checkpatch: remove reference to feature-removal-schedule.txt
In 9c0ece069, Linus removes feature-removal-schedule.txt from
Documentation, but there is still some reference to this file. So remove
them.
Signed-off-by: Tao Ma <boyu.mt@taobao.com> Acked-by: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kees Cook [Thu, 29 Nov 2012 03:18:38 +0000 (14:18 +1100)]
checkpatch: warn about using CONFIG_EXPERIMENTAL
This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, it is being removed. This will discourage future addition of
CONFIG_EXPERIMENTAL while it is being phased out.
Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Thu, 29 Nov 2012 03:18:37 +0000 (14:18 +1100)]
checkpatch: warn on unnecessary line continuations
When the previous line is not a line continuation and the current line has
a line continuation but is not a #define, emit a warning.
Signed-off-by: Joe Perches <joe@perches.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Constantine Shulyupin <const@makelinux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This function is used by sparc, powerpc tile and arm64 for compat support.
The patch adds a generic implementation with a wrapper for PowerPC to do
the u32->int sign extension.
The reason for a single patch covering powerpc, tile, sparc and arm64 is
to keep it bisectable, otherwise kernel building may fail with mismatched
function declarations.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> [for tile] Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Oleg Nesterov [Thu, 29 Nov 2012 03:18:35 +0000 (14:18 +1100)]
percpu_rw_semaphore: add lockdep annotations
Add lockdep annotations. Not only this can help to find the potential
problems, we do not want the false warnings if, say, the task takes two
different percpu_rw_semaphore's for reading. IOW, at least ->rw_sem
should not use a single class.
This patch exposes this internal lock to lockdep so that it represents the
whole percpu_rw_semaphore. This way we do not need to add another "fake"
->lockdep_map and lock_class_key. More importantly, this also makes the
output from lockdep much more understandable if it finds the problem.
In short, with this patch from lockdep pov percpu_down_read() and
percpu_up_read() acquire/release ->rw_sem for reading, this matches the
actual semantics. This abuses __up_read() but I hope this is fine and in
fact I'd like to have down_read_no_lockdep() as well,
percpu_down_read_recursive_readers() will need it.
Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Anton Arapov <anton@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
percpu_rw_semaphore->writer_mutex was only added to simplify the initial
rewrite, the only thing it protects is clear_fast_ctr() which otherwise
could be called by multiple writers. ->rw_sem is enough to serialize the
writers.
Kill this mutex and add "atomic_t write_ctr" instead. The writers
increment/decrement this counter, the readers check it is zero instead of
mutex_is_locked().
Move atomic_add(clear_fast_ctr(), slow_read_ctr) under down_write() to
avoid the race with other writers. This is a bit sub-optimal, only the
first writer needs this and we do not need to exclude the readers at this
stage. But this is simple, we do not want another internal lock until we
add more features.
And this speeds up the write-contended case. Before this patch the racing
writers sleep in synchronize_sched() sequentially, with this patch
multiple synchronize_sched's can "overlap" with each other. Note: we can
do more optimizations, this is only the first step.
Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Anton Arapov <anton@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Oleg Nesterov [Thu, 29 Nov 2012 03:18:34 +0000 (14:18 +1100)]
percpu_rw_semaphore: reimplement to not block the readers unnecessarily
Currently the writer does msleep() plus synchronize_sched() 3 times to
acquire/release the semaphore, and during this time the readers are
blocked completely. Even if the "write" section was not actually started
or if it was already finished.
With this patch down_write/up_write does synchronize_sched() twice and
down_read/up_read are still possible during this time, just they use the
slow path.
percpu_down_write() first forces the readers to use rw_semaphore and
increment the "slow" counter to take the lock for reading, then it
takes that rw_semaphore for writing and blocks the readers.
Also. With this patch the code relies on the documented behaviour of
synchronize_sched(), it doesn't try to pair synchronize_sched() with
barrier.
Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jan Beulich [Thu, 29 Nov 2012 03:18:34 +0000 (14:18 +1100)]
sscanf: don't ignore field widths for numeric conversions
This is another step towards better standard conformance. Rather than
adding a local buffer to store the specified portion of the string (with
the need to enforce an arbitrary maximum supported width to limit the
buffer size), do a maximum width conversion and then drop as much of it as
is necessary to meet the caller's request.
Also fail on negative field widths.
Uses the deprecated simple_strto*() functions because kstrtoXX() fail on
non-zero terminated strings.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andy Shevchenko [Thu, 29 Nov 2012 03:18:34 +0000 (14:18 +1100)]
drivers/of/fdt.c: re-use kernel's kbasename()
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andy Shevchenko [Thu, 29 Nov 2012 03:18:32 +0000 (14:18 +1100)]
lib: dynamic_debug: use kbasename()
Remove the custom implementation of the functionality similar to kbasename().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jason Baron <jbaron@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andy Shevchenko [Thu, 29 Nov 2012 03:18:32 +0000 (14:18 +1100)]
string: introduce helper to get base file name from given path
There are several places in the kernel that use functionality like
basename(3) with the exception: in case of '/foo/bar/' we expect to get an
empty string. Let's do it common helper for them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jason Baron <jbaron@redhat.com> Cc: YAMANE Toshiaki <yamanetoshi@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Thu, 29 Nov 2012 03:18:31 +0000 (14:18 +1100)]
drivers/video/backlight/lms283gf05.c: use GPIOF_INIT flags when using devm_gpio_request_one()
GPIOF_DIR_OUT and GPIOF_DIR_IN are defined as below:
GPIOF_DIR_OUT (0 << 0)
GPIOF_DIR_IN (1 << 0)
So, when !pdata->reset_inverted is 1, the gpio pin can be set as
input, instead of output.
To prevent this problem, GPIOF_INIT flag should be used when using
devm_gpio_request_one().
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Thierry Reding [Thu, 29 Nov 2012 03:18:29 +0000 (14:18 +1100)]
backlight: add of_find_backlight_by_node()
This function finds the struct backlight_device for a given device tree
node. A dummy function is provided so that it safely compiles out if OF
support is disabled.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
WARNING: drivers/video/backlight/built-in.o(.data+0x110): Section mismatch in reference from the variable ep93xxbl_driver to the
function .init.text:ep93xxbl_probe()
The variable ep93xxbl_driver references
the function __init ep93xxbl_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Axel Lin [Thu, 29 Nov 2012 03:18:28 +0000 (14:18 +1100)]
drivers/video/backlight/lm3639_bl.c: fix up world writable sysfs file
We don't need the sysfs file to be world writable or group writable.
This file is write-only, change it to S_IWUSR (0200).
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: "G.Shark Jeong" <gshark.jeong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Thu, 29 Nov 2012 03:18:28 +0000 (14:18 +1100)]
drivers/video/backlight/max8925_bl.c: drop devm_kfree of devm_kzalloc'd data
devm_kfree() allocates memory that is released when a driver detaches.
Thus, there is no reason to explicitly call devm_kfree in probe or remove
functions.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Thu, 29 Nov 2012 03:18:27 +0000 (14:18 +1100)]
drivers/video/backlight/88pm860x_bl.c: drop devm_kfree of devm_kzalloc'd data
devm_kfree() allocates memory that is released when a driver detaches.
Thus, there is no reason to explicitly call devm_kfree() in probe or remove
functions.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add 'const' to static array that was missing it in its definition. Also,
'const' is added to ili9320_write_regs(), because it is called by
vgg2432a4 driver.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add 'const' to static array that was missing it in its definition.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add 'const' to static array that was missing it in its definition.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Marek Vasut <marex@denx.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The mutex for accessing lp855x registers is used in case of the user-space
interaction. When the brightness is changed via sysfs, the mutex is
required. But the backlight class device already provides it. Thus, the
lp855x mutex is unnecessary.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kim, Milo [Thu, 29 Nov 2012 03:18:25 +0000 (14:18 +1100)]
drivers/video/backlight/lp855x_bl.c: use generic PWM functions
The LP855x family devices support the PWM input for the backlight control.
Period of the PWM is configurable in the platform side. Platform
specific functions are unnecessary anymore because generic PWM functions
are used inside the driver.
(PWM input mode)
To set the brightness, new lp855x_pwm_ctrl() is used.
If a PWM device is not allocated, devm_pwm_get() is called.
The PWM consumer name is from the chip name such as 'lp8550' and 'lp8556'.
To get the brightness value, no additional handling is required.
Just the value of 'props.brightness' is returned.
If the PWM driver is not ready while initializing the LP855x driver, it's
OK. The PWM device can be retrieved later, when the brightness value is
changed.
Documentation is updated with an example.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Thu, 29 Nov 2012 03:18:25 +0000 (14:18 +1100)]
backlight: tosa: use devm_gpio_request_one
By using devm_gpio_request_one it is possible to set the direction and
initial value in one shot. Thus, using devm_gpio_request_one can make the
code simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Thu, 29 Nov 2012 03:18:24 +0000 (14:18 +1100)]
backlight: lms283gf05: use devm_gpio_request_one
By using devm_gpio_request_one it is possible to set the direction
and initial value in one shot. Thus, using devm_gpio_request_one
can make the code simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Thu, 29 Nov 2012 03:18:22 +0000 (14:18 +1100)]
backlight: locomolcd: fix checkpatch error and warning
This patch fixes the checkpatch error and warning as below:
WARNING: line over 80 characters
WARNING: space prohibited between function name and open parenthesis '('
ERROR: trailing statements should be on next line
Also, long comments are fixed for the preferred style and
unnecessary lines are removed.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Thu, 29 Nov 2012 03:18:21 +0000 (14:18 +1100)]
backlight: ili9320: fix checkpatch error and warning
This patch fixes the checkpatch error and warning as below:
WARNING: please, no space before tabs
WARNING: please, no spaces at the start of a line
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
WARNING: braces {} are not necessary for single statement blocks
ERROR: code indent should use tabs where possible
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Thu, 29 Nov 2012 03:18:20 +0000 (14:18 +1100)]
backlight: hp680_bl: fix checkpatch error and warning
This patch fixes the checkpatch error and warning as below:
WARNING: please, no space before tabs
WARNING: please, no spaces at the start of a line
ERROR: do not initialise statics to 0 or NULL
ERROR: code indent should use tabs where possible
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Thu, 29 Nov 2012 03:18:19 +0000 (14:18 +1100)]
backlight: da903x_bl: use dev_get_drvdata() instead of platform_get_drvdata()
dev_get_drvdata() can be used instead of platform_get_drvdata()
to make the code smaller.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Cooks [Thu, 29 Nov 2012 03:18:18 +0000 (14:18 +1100)]
printk: boot_delay should only affect output
The boot_delay parameter affects all printk(), even if the log level
prevents visible output from the call. It results in delays greater than
the user intended without purpose.
This patch changes the behaviour of boot_delay to only delay output.
Signed-off-by: Andrew Cooks <acooks@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stephen Rothwell [Thu, 29 Nov 2012 03:18:17 +0000 (14:18 +1100)]
Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS
Make it easier for more architectures to select it and thus disable
drivers that use virt_to_bus().
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: James Hogan <james.hogan@imgtec.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Matthew Leach [Thu, 29 Nov 2012 03:18:15 +0000 (14:18 +1100)]
include/linux/init.h: use the stringify operator for the __define_initcall macro
Currently the __define_initcall() macro takes three arguments, fn, id and
level. The level argument is exactly the same as the id argument but
wrapped in quotes. To overcome this need to specify three arguments to
the __define_initcall macro, where one argument is the stringification of
another, we can just use the stringification macro instead.
Signed-off-by: Matthew Leach <matthew@mattleach.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wen Congyang [Thu, 29 Nov 2012 03:18:15 +0000 (14:18 +1100)]
Documentation/kernel-parameters.txt: update mem= option's spec according to its implementation
Current mem= implementation seems buggy because the specification and
implementation don't match. The current mem= has been working for many
years and it's not buggy - it works as expected. So we should update the
specification.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / karo-tx-linux.git / log