Dowan Kim [Sat, 5 Mar 2011 01:47:43 +0000 (17:47 -0800)]
staging: brcm80211: FIX for bug that prevents system from entering suspend state
The attempt to enter to suspend mode can be hindered when the network
interface is disabled.
When system enters the suspend mode with the network interface
disabled, network layer calls ifdown() followed by cfg80211 layer
calling wl_cfg80211_suspend() which is registered as suspend handler
for cfg80211 layer.
ifdown() call ultimately funnels down to __wl_cfg80211_down() call
where WL_STATUS_READY bit is cleared via call to
"clear_bit(WL_STATUS_READY, &wl->status)"
But CHECK_SYS_UP()checks WL_STATUS_READY bit thinking it's not ready
and returns -EIO from suspend handler which intern prevents entering
into system suspend state
CHECK_SYS_UP() is mainly used in the code path where upper layer would
request certain wifi related activity to be performed by the firmware,
where this calls helps to make sure our firmware would be in ready
state to respond to those requests
But in the case of wl_cfg80211_suspend() code path there is no need to
check for firmware status for any reason
Signed-off-by: Dowan Kim <dowan@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
wwang [Fri, 4 Mar 2011 02:56:36 +0000 (10:56 +0800)]
staging: rts_pstor: fix a bug that a greenhouse sd card can't be recognized
A greenhouse sd card can't be recognized using rts5209.
To fix this bug, these modifications are applied:
1, Move some codes which clear sd internal variables from sd_init_type to
sd_prepare_reset. So sd_init_type is useless any more and is removed
entirely;
2, If a sd card can't pass sd3.0 mode, the action of tunning phase should be
avoided when retrying sd2.0 mode.
Marek Belisko [Thu, 3 Mar 2011 12:38:17 +0000 (12:38 +0000)]
staging: gma500: fix build errors
This patch will fix following compilation error:
drivers/staging/gma500/psb_drv.c:1635: error: unknown field ‘pci_driver’ specified in initializer
drivers/staging/gma500/psb_drv.c:1636: error: unknown field ‘name’ specified in initializer
drivers/staging/gma500/psb_drv.c:1636: warning: initialization from incompatible pointer type
drivers/staging/gma500/psb_drv.c:1637: error: unknown field ‘id_table’ specified in initializer
drivers/staging/gma500/psb_drv.c:1637: warning: excess elements in union initializer
drivers/staging/gma500/psb_drv.c:1637: warning: (near initialization for ‘driver.kdriver’)
drivers/staging/gma500/psb_drv.c:1638: error: unknown field ‘resume’ specified in initializer
drivers/staging/gma500/psb_drv.c:1638: warning: excess elements in union initializer
drivers/staging/gma500/psb_drv.c:1638: warning: (near initialization for ‘driver.kdriver’)
drivers/staging/gma500/psb_drv.c:1639: error: unknown field ‘suspend’ specified in initializer
drivers/staging/gma500/psb_drv.c:1639: warning: excess elements in union initializer
drivers/staging/gma500/psb_drv.c:1639: warning: (near initialization for ‘driver.kdriver’)
drivers/staging/gma500/psb_drv.c:1640: error: unknown field ‘probe’ specified in initializer
drivers/staging/gma500/psb_drv.c:1640: warning: excess elements in union initializer
drivers/staging/gma500/psb_drv.c:1640: warning: (near initialization for ‘driver.kdriver’)
drivers/staging/gma500/psb_drv.c:1641: error: unknown field ‘remove’ specified in initializer
drivers/staging/gma500/psb_drv.c:1641: warning: excess elements in union initializer
drivers/staging/gma500/psb_drv.c:1641: warning: (near initialization for ‘driver.kdriver’)
drivers/staging/gma500/psb_drv.c:1643: error: unknown field ‘driver’ specified in initializer
drivers/staging/gma500/psb_drv.c:1643: warning: excess elements in union initializer
drivers/staging/gma500/psb_drv.c:1643: warning: (near initialization for ‘driver.kdriver’)
drivers/staging/gma500/psb_drv.c: In function ‘psb_init’:
drivers/staging/gma500/psb_drv.c:1664: error: implicit declaration of function ‘drm_init’
drivers/staging/gma500/psb_drv.c: In function ‘psb_exit’:
drivers/staging/gma500/psb_drv.c:1669: error: implicit declaration of function ‘drm_exit’
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Thu, 3 Mar 2011 12:38:04 +0000 (12:38 +0000)]
staging: gma500: Resync the patch queue with GregKH's space cleanup.
Remove all sorts of bits we can get rid of. We are now a very simple KMS
driver relying on the stolen memory for our framebuffer base (which is for
the moment hardcoded).
To support multiple frame buffers and some accel bits we will need some kind
of memory allocator, possibly a minimal use of GEM.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Jack Stone <jwjstone@fastmail.fm> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Aaro Koskinen [Wed, 2 Mar 2011 22:26:35 +0000 (00:26 +0200)]
staging: xgifb: remove private ioctls
Drop the badly defined and broken private ioctl interface. Since the
driver is in staging, and some of the ioctls are clearly unsafe or not
even working, it's unlikely that there are any users.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: hv: hv_mouse: fix camelcase in struct synthhid_device_info_ack
Just one field to fix up, s/Reserved/reserved/g
Odd that we have to set the reserved field to 0 when we send the
message, that would imply that it really isn't "reserved"...
Cc: Hank Janssen <hjanssen@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: hv: hv_mouse: use a real struct hid_descriptor
The data coming from the vmbus is really a hid descriptor, so use that
structure instead of having to mess around with a character array and
pointer fun.
Cc: Hank Janssen <hjanssen@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: hv: hv_mouse: change camelcase for struct synthhid_msg
Turns out no one references the data field of this structure, so I
wonder if it's really even needed at all. All this is used for is the
type of the message here, so this structure might be able to be dropped
entirely in the future.
Cc: Hank Janssen <hjanssen@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: hv: hv_mouse: use proper input define for bus type
The code was so close, the bus type was in a comment, so go all the way
and actually use the define here. It's as if the original author was so
afraid of license issues if they referenced a define in the processed
code but they felt safe to keep it in a comment. Chicken.
Cc: Hank Janssen <hjanssen@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: hv: hv_mouse.c: remove struct mousevsc_drv_obj function callbacks
They aren't needed at all either because they are never called (OnOpen,
OnClose), or because we can just call the real function instead as it's
never set to anything else.
Just another step in unwinding the callback mess...
Cc: Hank Janssen <hjanssen@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move the mouse_vsc.c file into hv_mouse_drv.c as it makes
no sense to have two files here, as we don't have to worry about the
"closed vs. open" split that this code was originally written for.
Cc: Hank Janssen <hjanssen@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Also mark this as a nice FIXME as we shouldn't ever
care about the value of an atomic variable, which makes me seriously
doubt the validity of this reference counting code. Odds are it can be
ripped out completly, or at the very least, converted to using a kref.
Cc: Hank Janssen <hjanssen@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: remove osl source files from driver
The whole need for the OSL concept has been removed from the driver. This
is the final commit removing the source file and include file from the
driver repository. All include statements of osl.h have been removed from
the other source files.
Reviewed-by: Brett Rudley <brudley@broadcom.com> Reviewed-by: Henry Ptasinski <henryp@broadcom.com> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: remove counting of allocated sk_buff packets
The function pkt_buf_get_skb and pkt_buf_free_skb were using struct
osl_info field pktalloced to maintain counter of buffers in use in
the driver. It was decided to remove this facility. The prototypes
of these functions have been modified and the calling code adapted.
Reviewed-by: Brett Rudley <brudley@broadcom.com> Reviewed-by: Henry Ptasinski <henryp@broadcom.com> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Several declarations and macro definitions in osl.h are still needed
and therefore moved to bcmutils.h or hnddma.h. The osl_assert function
is moved to bcmutils.c accordingly.
Reviewed-by: Brett Rudley <brudley@broadcom.com> Reviewed-by: Henry Ptasinski <henryp@broadcom.com> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: remove unused attributes from struct osl_info
Getting rid of the whole osl concept soon this removes most fields
in struct osl_info. Turned out hnddma.c was still using it so this
was fixed and now it gets pointer to bus device from si_info which
it only needs in the attach function for this purpose so reference
to it does not need to be kept. Two unused functions referencing
the removed fields in linux_osl.c also were removed.
Reviewed-by: Brett Rudley <brudley@broadcom.com> Reviewed-by: Henry Ptasinski <henryp@broadcom.com> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: changed module wlc_mac80211 to wlc_main
The source and include file for the wlc_mac80211 module has been
renamed to wlc_main and subsequently the include statement in
other source files. This module provides the main interface towards
wl_mac80211 module.
Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Brett Rudley <brudley@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arnd Bergmann [Tue, 1 Mar 2011 23:13:05 +0000 (00:13 +0100)]
staging/usbip: convert to kthread
usbip has its own infrastructure for managing kernel
threads, similar to kthread. By changing it to use
the standard functions, we can simplify the code
and get rid of one of the last BKL users at the
same time.
Simplify setting of power state in power.c when sending power
state notifications to the access point.
Signed-off-by: Philip Worrall <philip.worrall at googlemail.com> Reviewed-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / karo-tx-linux.git / log