Kukjin Kim [Wed, 26 Jun 2013 08:25:04 +0000 (17:25 +0900)]
Merge tag 'remove-nondt-exynos-3' into for-next
cleanup and removing dead code for only support DT for exynos
- remove board file for exynos
- remove legacy files which are not used anymore
- decouple ARCH_EXYNOS from PLAT_S5P
Kukjin Kim [Wed, 26 Jun 2013 08:24:28 +0000 (17:24 +0900)]
Merge tag 'common-clk-audio' into for-next
based on exynos-dt-2 and s3c24xx-dt-2
- use #include for all Samsung DT
- add clk for exynos audio subsystem (audss) and i2s
- support audss and i2s for exynos5250
Kukjin Kim [Wed, 26 Jun 2013 08:21:02 +0000 (17:21 +0900)]
Merge tag 'exynos-dt-2' into for-next
2nd exynos dt update based on tags/exynos-dt-1
- enable RTC on exynos5250 snow and Arndale boards
- add support LCD and PWM for exynos4210 Origen board
- update bootargs to support 8GiB for exynos5440 SSDK5440 and SD5v1 boards
- enable spi and add opp level for exynos5440
- add example doc for samsung-pinctrl dt bindings
Kukjin Kim [Wed, 26 Jun 2013 08:20:34 +0000 (17:20 +0900)]
Merge tag 'exynos-dt-1' into for-next
update exynos DT for
- usb3phy and dwc3 for exynos5250
- keypad for exynos4412
- TMU clock for exynos4210
- MFC clock for exynos4
- DP controller for exynos5250
- G2D clock for exynos4
- some exynos boards
Linus Torvalds [Sat, 22 Jun 2013 19:44:45 +0000 (09:44 -1000)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are two fixes that came in this week, one for a regression we
introduced in 3.10 in the GIC interrupt code, and the other one fixes
a typo in newly introduced code"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
irqchip: gic: call gic_cpu_init() as well in CPU_STARTING_FROZEN case
ARM: dts: Correct the base address of pinctrl_3 on Exynos5250
Linus Torvalds [Sat, 22 Jun 2013 19:02:44 +0000 (09:02 -1000)]
Merge tag 'driver-core-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg Kroah-Hartman:
"Here's a single patch for the firmware core that resolves a reported
oops in the firmware core that people have been hitting."
* tag 'driver-core-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware loader: fix use-after-free by double abort
Linus Torvalds [Sat, 22 Jun 2013 19:01:47 +0000 (09:01 -1000)]
Merge tag 'usb-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg Kroah-Hartman:
"Here are two USB patches for 3.10.
One updates the Kconfig wording for CONFIG_USB_PHY to make it,
hopefully, more obvious what this option is (I know you complained
about this when it hit the tree.) The other is a new device id for a
driver"
* tag 'usb-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cable
usb: phy: Improve Kconfig help for CONFIG_USB_PHY
Linus Torvalds [Sat, 22 Jun 2013 19:00:28 +0000 (09:00 -1000)]
Merge tag 'tty-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pul tty fixes from Greg Kroah-Hartman:
"Here are two tty core fixes that resolve some regressions that have
been reported recently. Both tiny fixes, but needed"
* tag 'tty-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix transient pty write() EIO
tty/vt: Return EBUSY if deallocating VT1 and it is busy
Pull SCSI target fixes from Nicholas Bellinger:
"Included is the recent tcm_qla2xxx residual underrun length fix from
Roland, along with Joern's iscsi-target patch for session_lock
breakage within iscsit_stop_time2retain_timer() code. Both are CC'ed
to stable.
The remaining two are specific to recent iscsi-target + iser
conversion changes. One drops some left-over debug noise, and Andy's
patch fixes configfs attribute handling during an explicit network
portal feature bit disable when iser-target is unsupported."
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iscsi-target: Remove left over v3.10-rc debug printks
target/iscsi: Fix op=disable + error handling cases in np_store_iser
tcm_qla2xxx: Fix residual for underrun commands that fail
target/iscsi: don't corrupt bh_count in iscsit_stop_time2retain_timer()
Linus Torvalds [Sat, 22 Jun 2013 18:43:17 +0000 (08:43 -1000)]
Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Another set of fixes for Kernel 3.10.
This series contain:
- two Kbuild fixes for randconfig
- a buffer overflow when using rtl28xuu with r820t tuner
- one clk fixup on exynos4-is driver"
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] Fix build when drivers are builtin and frontend modules
[media] s5p makefiles: don't override other selections on obj-[ym]
[media] exynos4-is: Fix FIMC-IS clocks initialization
[media] rtl28xxu: fix buffer overflow when probing Rafael Micro r820t tuner
Linus Torvalds [Sat, 22 Jun 2013 18:42:20 +0000 (08:42 -1000)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"Several fixes for bugs caught while looking through f_pos (ab)users"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aout32 coredump compat fix
splice: don't pass the address of ->f_pos to methods
mconsole: we'd better initialize pos before passing it to vfs_read()...
Al Viro [Sat, 22 Jun 2013 07:01:38 +0000 (11:01 +0400)]
aout32 coredump compat fix
dump_seek() does SEEK_CUR, not SEEK_SET; native binfmt_aout
handles it correctly (seeks by PAGE_SIZE - sizeof(struct user),
getting the current position to PAGE_SIZE), compat one seeks
by PAGE_SIZE and ends up at PAGE_SIZE + already written...
Linus Torvalds [Fri, 21 Jun 2013 16:33:48 +0000 (06:33 -1000)]
Merge branch 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"This series fixes a couple of build failures, and fixes MTRR cleanup
and memory setup on very specific memory maps.
Finally, it fixes triggering backtraces on all CPUs, which was
inadvertently disabled on x86."
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Fix dummy variable buffer allocation
x86: Fix trigger_all_cpu_backtrace() implementation
x86: Fix section mismatch on load_ucode_ap
x86: fix build error and kconfig for ia32_emulation and binfmt
range: Do not add new blank slot with add_range_with_merge
x86, mtrr: Fix original mtrr range get for mtrr_cleanup
Linus Torvalds [Fri, 21 Jun 2013 16:33:06 +0000 (06:33 -1000)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm radeon fixes from Dave Airlie:
"One core fix, but mostly radeon fixes for s/r and big endian UVD
support, and a fix to stop the GPU being reset for no good reason, and
crashing people's machines."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: update lockup tracking when scheduling in empty ring
drm/prime: Honor requested file flags when exporting a buffer
drm/radeon: fix UVD on big endian
drm/radeon: fix write back suspend regression with uvd v2
drm/radeon: do not try to uselessly update virtual memory pagetable
Linus Torvalds [Fri, 21 Jun 2013 16:31:10 +0000 (06:31 -1000)]
Merge tag 'acpi-3.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
- Fix for a regression causing a failure to turn on some devices on
some systems during initialization introduced by a recent revert of
an ACPI PM change that broke something else. Fortunately, we know
exactly what devices are affected, so we can add a fix just for them
leaving everyone else alone.
- ACPI power resources initialization fix preventing a NULL pointer
from being dereferenced in the acpi_add_power_resource() error code
path.
- ACPI dock station driver fix that adds missing locking to
write_undock().
- ACPI resources allocation fix changing the scope of an old workaround
so that it doesn't affect systems that aren't actually buggy. This
was reported a couple of days ago to fix DMA problems on some new
platforms so we need it in -stable. From Mika Westerberg.
* tag 'acpi-3.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / LPSS: Power up LPSS devices during enumeration
ACPI / PM: Fix error code path for power resources initialization
ACPI / dock: Take ACPI scan lock in write_undock()
ACPI / resources: call acpi_get_override_irq() only for legacy IRQ resources
Linus Torvalds [Fri, 21 Jun 2013 16:29:22 +0000 (06:29 -1000)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Three one-line fixes for my first pull request; one for x86 host, one
for x86 guest, one for PPC"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86: kvmclock: zero initialize pvclock shared memory area
kvm/ppc/booke: Delay kvmppc_lazy_ee_enable
KVM: x86: remove vcpu's CPL check in host-invoked XCR set
Linus Torvalds [Fri, 21 Jun 2013 16:27:40 +0000 (06:27 -1000)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph fix from Sage Weil:
"This fixes a problem preventing the kernel and userland librbd
libraries from sharing data with the new format 2 images"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: use the correct length for format 2 object names
H. Peter Anvin [Fri, 21 Jun 2013 10:01:21 +0000 (03:01 -0700)]
Merge tag 'efi-urgent' into x86/urgent
* Don't leak random kernel memory to EFI variable NVRAM when attempting
to initiate garbage collection. Also, free the kernel memory when
we're done with it instead of leaking - Ben Hutchings
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Andy Grover [Wed, 29 May 2013 19:05:59 +0000 (12:05 -0700)]
target/iscsi: Fix op=disable + error handling cases in np_store_iser
Writing 0 when iser was not previously enabled, so succeed but do
nothing so that user-space code doesn't need a try: catch block
when ib_isert logic is not available.
Also, return actual error from add_network_portal using PTR_ERR
during op=enable failure.
Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Dave Airlie [Thu, 20 Jun 2013 22:52:19 +0000 (08:52 +1000)]
Merge branch 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
One user visible fix to stop misreport GPU hangs and subsequent resets.
* 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: update lockup tracking when scheduling in empty ring
Jerome Glisse [Wed, 19 Jun 2013 14:02:28 +0000 (10:02 -0400)]
drm/radeon: update lockup tracking when scheduling in empty ring
There might be issue with lockup detection when scheduling on an
empty ring that have been sitting idle for a while. Thus update
the lockup tracking data when scheduling new work in an empty ring.
Signed-off-by: Jerome Glisse <jglisse@redhat.com> Tested-by: Andy Lutomirski <luto@amacapital.net> Cc: stable@vger.kernel.org Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linus Torvalds [Thu, 20 Jun 2013 18:18:35 +0000 (08:18 -1000)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Two smaller fixes - plus a context tracking tracing fix that is a bit
bigger"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/context-tracking: Add preempt_schedule_context() for tracing
sched: Fix clear NOHZ_BALANCE_KICK
sched/x86: Construct all sibling maps if smt
Linus Torvalds [Thu, 20 Jun 2013 18:17:36 +0000 (08:17 -1000)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Four fixes. The mmap ones are unfortunately larger than desired -
fuzzing uncovered bugs that needed perf context life time management
changes to fix properly"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix broken PEBS-LL support on SNB-EP/IVB-EP
perf: Fix mmap() accounting hole
perf: Fix perf mmap bugs
kprobes: Fix to free gone and unused optprobes
Linus Torvalds [Thu, 20 Jun 2013 18:16:07 +0000 (08:16 -1000)]
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull cpu idle fixes from Thomas Gleixner:
- Add a missing irq enable. Fallout of the idle conversion
- Fix stackprotector wreckage caused by the idle conversion
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
idle: Enable interrupts in the weak arch_cpu_idle() implementation
idle: Add the stack canary init to cpu_startup_entry()
Linus Torvalds [Thu, 20 Jun 2013 18:15:13 +0000 (08:15 -1000)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
- Fix inconstinant clock usage in virtual time accounting
- Fix a build error in KVM caused by the NOHZ work
- Remove a pointless timekeeping duty assignment which breaks NOHZ
- Use a proper notifier return value to avoid random behaviour
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick: Remove useless timekeeping duty attribution to broadcast source
nohz: Fix notifier return val that enforce timekeeping
kvm: Move guest entry/exit APIs to context_tracking
vtime: Use consistent clocks among nohz accounting
Linus Torvalds [Thu, 20 Jun 2013 18:08:46 +0000 (08:08 -1000)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc fix fro, Benjamin Herrenschmidt:
"We accidentally broke hugetlbfs on Freescale embedded processors which
use a slightly different page table layout than our server processors"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Fix bad pmd error with book3E config
Linus Torvalds [Thu, 20 Jun 2013 18:07:42 +0000 (08:07 -1000)]
Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull tilepro fix from Chris Metcalf:
"This change allows the older tilepro architecture to be correctly
built by newer gccs, despite a change that caused gcc to start trying
to use an out-of-line implementation for __builtin_ffsll().
This should be inline again starting with gcc 4.7.4 and 4.8.2 or so,
but meanwhile this change keeps things from breaking, with the only
cost being a few bytes of code in the kernel to provide __ffsdi2 even
for compilers that do inline it"
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tilepro: work around module link error with gcc 4.7
[media] Fix build when drivers are builtin and frontend modules
There are a large number of reports that the media build is
not compiling when some drivers are compiled as builtin, while
the needed frontends are compiled as module.
On the last one of such reports:
From: kbuild test robot <fengguang.wu@intel.com>
Subject: saa7134-dvb.c:undefined reference to `zl10039_attach'
The .config file has:
CONFIG_VIDEO_SAA7134=y
CONFIG_VIDEO_SAA7134_DVB=y
# CONFIG_MEDIA_ATTACH is not set
CONFIG_DVB_ZL10039=m
And it produces all those errors:
drivers/built-in.o: In function `set_type':
tuner-core.c:(.text+0x2f263e): undefined reference to `tea5767_attach'
tuner-core.c:(.text+0x2f273e): undefined reference to `tda9887_attach'
drivers/built-in.o: In function `tuner_probe':
tuner-core.c:(.text+0x2f2d20): undefined reference to `tea5767_autodetection'
drivers/built-in.o: In function `av7110_attach':
av7110.c:(.text+0x330bda): undefined reference to `ves1x93_attach'
av7110.c:(.text+0x330bf7): undefined reference to `stv0299_attach'
av7110.c:(.text+0x330c63): undefined reference to `tda8083_attach'
av7110.c:(.text+0x330d09): undefined reference to `ves1x93_attach'
av7110.c:(.text+0x330d33): undefined reference to `tda8083_attach'
av7110.c:(.text+0x330d5d): undefined reference to `stv0297_attach'
av7110.c:(.text+0x330dbe): undefined reference to `stv0299_attach'
drivers/built-in.o: In function `tuner_attach_dtt7520x':
ngene-cards.c:(.text+0x3381cb): undefined reference to `dvb_pll_attach'
drivers/built-in.o: In function `demod_attach_lg330x':
ngene-cards.c:(.text+0x33828a): undefined reference to `lgdt330x_attach'
drivers/built-in.o: In function `demod_attach_stv0900':
ngene-cards.c:(.text+0x3383d5): undefined reference to `stv090x_attach'
drivers/built-in.o: In function `cineS2_probe':
ngene-cards.c:(.text+0x338b7f): undefined reference to `drxk_attach'
drivers/built-in.o: In function `configure_tda827x_fe':
saa7134-dvb.c:(.text+0x346ae7): undefined reference to `tda10046_attach'
drivers/built-in.o: In function `dvb_init':
saa7134-dvb.c:(.text+0x347283): undefined reference to `mt352_attach'
saa7134-dvb.c:(.text+0x3472cd): undefined reference to `mt352_attach'
saa7134-dvb.c:(.text+0x34731c): undefined reference to `tda10046_attach'
saa7134-dvb.c:(.text+0x34733c): undefined reference to `tda10046_attach'
saa7134-dvb.c:(.text+0x34735c): undefined reference to `tda10046_attach'
saa7134-dvb.c:(.text+0x347378): undefined reference to `tda10046_attach'
saa7134-dvb.c:(.text+0x3473db): undefined reference to `tda10046_attach'
drivers/built-in.o:saa7134-dvb.c:(.text+0x347502): more undefined references to `tda10046_attach' follow
drivers/built-in.o: In function `dvb_init':
saa7134-dvb.c:(.text+0x347812): undefined reference to `mt352_attach'
saa7134-dvb.c:(.text+0x347951): undefined reference to `mt312_attach'
saa7134-dvb.c:(.text+0x3479a9): undefined reference to `mt312_attach'
>> saa7134-dvb.c:(.text+0x3479c1): undefined reference to `zl10039_attach'
This is happening because a builtin module can't use directly a symbol
found on a module. By enabling CONFIG_MEDIA_ATTACH, the configuration
becomes valid, as dvb_attach() macro loads the module if needed, making
the symbol available to the builtin module.
While this bug started to appear after the patches that use IS_DEFINED
macro (like changeset 7b34be71db533f3e0cf93d53cf62d036cdb5418a), this
bug is a way ancient than that.
The thing is that, before the IS_DEFINED() patches, the logic used to be:
The above code, with the .config file used, was evoluting to FALSE
(instead of TRUE as it should be, as CONFIG_DVB_ZL10039 is 'm'),
and were adding the static inline code at saa7134-dvb, instead
of the external call. So, while it weren't producing any compilation
error, the code weren't working either.
So, as the overhead for using CONFIG_MEDIA_ATTACH is minimal, just
enable it, if MODULES is defined.
Shawn Guo [Wed, 12 Jun 2013 11:30:27 +0000 (19:30 +0800)]
irqchip: gic: call gic_cpu_init() as well in CPU_STARTING_FROZEN case
Commit c011470 (irqchip: gic: Perform the gic_secondary_init() call via
CPU notifier) moves gic_secondary_init() that used to be called in
.smp_secondary_init hook into a notifier call. But it changes the
system behavior a little bit. Before the commit, gic_cpu_init()
is called not only when kernel brings up the secondary cores but also
when system resuming procedure hot-plugs the cores back to kernel.
While after the commit, the function will not be called in the latter
case, where the 'action' will not be CPU_STARTING but
CPU_STARTING_FROZEN. This behavior difference at least causes the
following suspend/resume regression on imx6q.
$ echo mem > /sys/power/state
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
mmc1: card e624 removed
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
PM: suspend of devices complete after 5.930 msecs
PM: suspend devices took 0.010 seconds
PM: late suspend of devices complete after 0.343 msecs
PM: noirq suspend of devices complete after 0.828 msecs
Disabling non-boot CPUs ...
CPU1: shutdown
CPU2: shutdown
CPU3: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
INFO: rcu_sched detected stalls on CPUs/tasks: { 1 2 3} (detected by 0, t=2102 jiffies, g=4294967169, c=4294967168, q=17)
Task dump for CPU 1:
swapper/1 R running 0 0 1 0x00000000
Backtrace:
[<bf895ff4>] (0xbf895ff4) from [<00000000>] ( (null))
Backtrace aborted due to bad frame pointer <8007ccdc>
Task dump for CPU 2:
swapper/2 R running 0 0 1 0x00000000
Backtrace:
[<8075dbdc>] (0x8075dbdc) from [<00000000>] ( (null))
Backtrace aborted due to bad frame pointer <00000002>
Task dump for CPU 3:
swapper/3 R running 0 0 1 0x00000000
Backtrace:
[<8075dbdc>] (0x8075dbdc) from [<00000000>] ( (null))
Fix the regression by checking 'action' being CPU_STARTING_FROZEN to
have gic_cpu_init() called for secondary cores when system resumes.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The following change fixes the x86 implementation of
trigger_all_cpu_backtrace(), which was previously (accidentally,
as far as I can tell) disabled to always return false as on
architectures that do not implement this function.
trigger_all_cpu_backtrace(), as defined in include/linux/nmi.h,
should call arch_trigger_all_cpu_backtrace() if available, or
return false if the underlying arch doesn't implement this
function.
x86 did provide a suitable arch_trigger_all_cpu_backtrace()
implementation, but it wasn't actually being used because it was
declared in asm/nmi.h, which linux/nmi.h doesn't include. Also,
linux/nmi.h couldn't easily be fixed by including asm/nmi.h,
because that file is not available on all architectures.
I am proposing to fix this by moving the x86 definition of
arch_trigger_all_cpu_backtrace() to asm/irq.h.
Tested via: echo l > /proc/sysrq-trigger
Before the change, this uses a fallback implementation which
shows backtraces on active CPUs (using
smp_call_function_interrupt() )
After the change, this shows NMI backtraces on all CPUs
Jed Davis [Thu, 20 Jun 2013 03:07:14 +0000 (04:07 +0100)]
perf: arm64: Record the user-mode PC in the call chain.
With this change, we no longer lose the innermost entry in the user-mode
part of the call chain. See also the x86 port, which includes the ip,
and the corresponding change in arch/arm.
Signed-off-by: Jed Davis <jld@mozilla.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[media] s5p makefiles: don't override other selections on obj-[ym]
The $obj-m/$obj-y vars should be adding new modules to build, not
overriding it. So, it should never use
$obj-y := foo.o
instead, it should use:
$obj-y += foo.o
Failing to do that is very bad, as it will suppress needed modules.
Book3E uses the hugepd at PMD level and don't encode pte directly
at the pmd level. So it will find the lower bits of pmd set
and the pmd_bad check throws error. Infact the current code
will never take the free_hugepd_range call at all because it will
clear the pmd if it find a hugepd pointer. Fix this by clearing
bad pmd only if it is not a hugepd pointer.
ACPI / LPSS: Power up LPSS devices during enumeration
Commit 7cd8407 (ACPI / PM: Do not execute _PS0 for devices without
_PSC during initialization) introduced a regression on some systems
with Intel Lynxpoint Low-Power Subsystem (LPSS) where some devices
need to be powered up during initialization, but their device objects
in the ACPI namespace have _PS0 and _PS3 only (without _PSC or power
resources).
To work around this problem, make the ACPI LPSS driver power up
devices it knows about by using a new helper function
acpi_device_fix_up_power() that does all of the necessary
sanity checks and calls acpi_dev_pm_explicit_set() to put the
device into D0.
Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI / PM: Fix error code path for power resources initialization
Commit 781d737 (ACPI: Drop power resources driver) introduced a
bug in the power resources initialization error code path causing
a NULL pointer to be referenced in acpi_release_power_resource()
if there's an error triggering a jump to the 'err' label in
acpi_add_power_resource(). This happens because the list_node
field of struct acpi_power_resource has not been initialized yet
at this point and doing a list_del() on it is a bad idea.
To prevent this problem from occuring, initialize the list_node
field of struct acpi_power_resource upfront.
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.9+ <stable@vger.kernel.org> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
ACPI / dock: Take ACPI scan lock in write_undock()
Since commit 3757b94 (ACPI / hotplug: Fix concurrency issues and
memory leaks) acpi_bus_scan() and acpi_bus_trim() must always be
called under acpi_scan_lock, but currently the following scenario
violating that requirement is possible:
Fix that by making write_undock() acquire acpi_scan_lock before
calling handle_eject_request() as appropriate (begin_undock() is
under the lock too in analogy with acpi_dock_deferred_cb()).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.9+ <stable@vger.kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com>
Mika Westerberg [Mon, 20 May 2013 15:41:45 +0000 (15:41 +0000)]
ACPI / resources: call acpi_get_override_irq() only for legacy IRQ resources
acpi_get_override_irq() was added because there was a problem with
buggy BIOSes passing wrong IRQ() resource for the RTC IRQ. The
commit that added the workaround was 61fd47e0c8476 (ACPI: fix two
IRQ8 issues in IOAPIC mode).
With ACPI 5 enumerated devices there are typically one or more
extended IRQ resources per device (and these IRQs can be shared).
However, the acpi_get_override_irq() workaround forces all IRQs in
range 0 - 15 (the legacy ISA IRQs) to be edge triggered, active high
as can be seen from the dmesg below:
ACPI: IRQ 6 override to edge, high
ACPI: IRQ 7 override to edge, high
ACPI: IRQ 7 override to edge, high
ACPI: IRQ 13 override to edge, high
Also /proc/interrupts for the I2C controllers (INT33C2 and INT33C3) shows
the same thing:
7: 4 0 0 0 IO-APIC-edge INT33C2:00, INT33C3:00
The _CSR method for INT33C2 (and INT33C3) device returns following
resource:
which states that this is supposed to be level triggered, active low,
shared IRQ instead.
Fix this by making sure that acpi_get_override_irq() gets only called
when we are dealing with legacy IRQ() or IRQNoFlags() descriptors.
While we are there, correct pr_warning() to print the right triggering
value.
This change turns out to be necessary to make DMA work correctly on
systems based on the Intel Lynxpoint PCH (Platform Controller Hub).
[rjw: Changelog] Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Paul Gortmaker [Wed, 19 Jun 2013 15:15:26 +0000 (11:15 -0400)]
x86: Fix section mismatch on load_ucode_ap
We are in the process of removing all the __cpuinit annotations.
While working on making that change, an existing problem was
made evident:
WARNING: arch/x86/kernel/built-in.o(.text+0x198f2): Section mismatch
in reference from the function cpu_init() to the function
.init.text:load_ucode_ap() The function cpu_init() references
the function __init load_ucode_ap(). This is often because cpu_init
lacks a __init annotation or the annotation of load_ucode_ap is wrong.
This now appears because in my working tree, cpu_init() is no longer
tagged as __cpuinit, and so the audit picks up the mismatch. The 2nd
hypothesis from the audit is the correct one, as there was an incorrect
__init tag on the prototype in the header (but __cpuinit was used on
the function itself.)
The audit is telling us that the prototype's __init annotation took
effect and the function did land in the .init.text section. Checking
with objdump on a mainline tree that still has __cpuinit shows that
the __cpuinit on the function takes precedence over the __init on the
prototype, but that won't be true once we make __cpuinit a no-op.
Even though we are removing __cpuinit, we temporarily align both
the function and the prototype on __cpuinit so that the changeset
can be applied to stable trees if desired.
[ hpa: build fix only, no object code change ]
Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: stable <stable@vger.kernel.org> # 3.9+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Link: http://lkml.kernel.org/r/1371654926-11729-1-git-send-email-paul.gortmaker@windriver.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
David Daney [Mon, 17 Jun 2013 15:46:07 +0000 (08:46 -0700)]
mn10300: Fix include dependency in irqflags.h et al.
We need to pick up the definition of raw_smp_processor_id() from
asm/smp.h. For the !SMP case, we need to supply a definition of
raw_smp_processor_id().
Because of the include dependencies we cannot use smp_call_func_t in
asm/smp.h, but we do need linux/thread_info.h
Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull sparc fixes from David Miller:
"Various sparc bug fixes, in particular:
1) TSB hashes have to be flushed before TLB on sparc64, from Dave
Kleikamp.
2) LEON timer interrupts can get stuck, from Andreas Larsson.
3) Sparc64 needs to handle lack of address-congruence devicetree
property, from Bob Picco"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: tsb must be flushed before tlb
sparc,leon: Convert to use devm_ioremap_resource
sparc64 address-congruence property
sparc32, leon: Enable interrupts before going idle to avoid getting stuck
sparc32, leon: Remove separate "ticker" timer for SMP
sparc: kernel: using strlcpy() instead of strcpy()
arch: sparc: prom: looping issue, need additional length check in the outside looping
sparc: remove inline marking of EXPORT_SYMBOL functions
sparc: Switch to asm-generic/linkage.h
Linus Torvalds [Wed, 19 Jun 2013 16:23:56 +0000 (06:23 -1000)]
Merge branch 'parisc-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"This contains a kernel segfault fix when reading /proc/kpageflags or
/proc/kpagecount, two fixes for the serial port and PCI graphic card
support on C8000 workstations and a fix to use unshadowed registers
for flushing D- and I-caches."
* 'parisc-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Use unshadowed index register for flush instructions in flush_dcache_page_asm and flush_icache_page_asm
parisc: provide pci_mmap_page_range() for parisc
parisc: fix serial ports on C8000 workstation
parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50 (part 2)
James Hogan [Fri, 14 Jun 2013 09:31:01 +0000 (10:31 +0100)]
metag: fix mm/hugetlb.c build breakage
Commit 106c992a5ebe ("mm/hugetlb: add more arch-defined huge_pte
functions") added an include of <asm-generic/hugetlb.h> to each
architecture's <asm/hugetlb.h> (except s390). Unfortunately metag was
missed which resulted in build errors when hugetlbfs is enabled (see
below).
Add the include for metag too to fix the build errors:
mm/hugetlb.c In function 'make_huge_pte':
mm/hugetlb.c +2250 : error: implicit declaration of function 'huge_pte_mkwrite'
mm/hugetlb.c +2250 : error: implicit declaration of function 'huge_pte_mkdirty'
...
Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 19 Jun 2013 16:19:46 +0000 (06:19 -1000)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
"The larger changes this time are
- "ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page"
which fixes more data corruption problems with O_DIRECT
- "ARM: 7759/1: decouple CPU offlining from reboot/shutdown" which
gets us back to working shutdown/reboot on SMP platforms
- "ARM: 7752/1: errata: LoUIS bit field in CLIDR register is incorrect"
which fixes a shutdown regression found in v3.10 on Versatile
Express platforms.
The remainder are the quite small, maybe one or two line changes"
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7759/1: decouple CPU offlining from reboot/shutdown
ARM: 7756/1: zImage/virt: remove hyp-stub.S during distclean
ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page
ARM: 7754/1: Fix the CPU ID and the mask associated to the PJ4B
ARM: 7753/1: map_init_section flushes incorrect pmd
ARM: 7752/1: errata: LoUIS bit field in CLIDR register is incorrect
The ISP clock register content is not preserved over the ISP power domain
off/on cycle. Instead of setting the clock frequencies once at probe time
the clock rates set up is moved to the runtime_resume handler, which is
invoked after the related power domain is already enabled, ensuring the
clocks are properly configured when the device is actively used.
This fixes the FIMC-IS malfunctions and STREAM ON timeout errors accuring
on some boards:
[ 59.860000] fimc_is_general_irq_handler:583 ISR_NDONE: 5: 0x800003e8, IS_ERROR_UNKNOWN
[ 59.860000] fimc_is_general_irq_handler:586 IS_ERROR_TIME_OUT
Steven Rostedt [Fri, 24 May 2013 19:23:40 +0000 (15:23 -0400)]
tracing/context-tracking: Add preempt_schedule_context() for tracing
Dave Jones hit the following bug report:
===============================
[ INFO: suspicious RCU usage. ]
3.10.0-rc2+ #1 Not tainted
-------------------------------
include/linux/rcupdate.h:771 rcu_read_lock() used illegally while idle!
other info that might help us debug this:
RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0
RCU used illegally from extended quiescent state!
2 locks held by cc1/63645:
#0: (&rq->lock){-.-.-.}, at: [<ffffffff816b39fd>] __schedule+0xed/0x9b0
#1: (rcu_read_lock){.+.+..}, at: [<ffffffff8109d645>] cpuacct_charge+0x5/0x1f0
What happened was that the function tracer traced the schedule_user() code
that tells RCU that the system is coming back from userspace, and to
add the CPU back to the RCU monitoring.
Because the function tracer does a preempt_disable/enable_notrace() calls
the preempt_enable_notrace() checks the NEED_RESCHED flag. If it is set,
then preempt_schedule() is called. But this is called before the user_exit()
function can inform the kernel that the CPU is no longer in user mode and
needs to be accounted for by RCU.
The fix is to create a new preempt_schedule_context() that checks if
the kernel is still in user mode and if so to switch it to kernel mode
before calling schedule. It also switches back to user mode coming back
from schedule in need be.
The only user of this currently is the preempt_enable_notrace(), which is
only used by the tracing subsystem.
Vincent Guittot [Wed, 5 Jun 2013 08:13:11 +0000 (10:13 +0200)]
sched: Fix clear NOHZ_BALANCE_KICK
I have faced a sequence where the Idle Load Balance was sometime not
triggered for a while on my platform, in the following scenario:
CPU 0 and CPU 1 are running tasks and CPU 2 is idle
CPU 1 kicks the Idle Load Balance
CPU 1 selects CPU 2 as the new Idle Load Balancer
CPU 2 sets NOHZ_BALANCE_KICK for CPU 2
CPU 2 sends a reschedule IPI to CPU 2
While CPU 3 wakes up, CPU 0 or CPU 1 migrates a waking up task A on CPU 2
CPU 2 finally wakes up, runs task A and discards the Idle Load Balance
task A quickly goes back to sleep (before a tick occurs on CPU 2)
CPU 2 goes back to idle with NOHZ_BALANCE_KICK set
Whenever CPU 2 will be selected as the ILB, no reschedule IPI will be sent
because NOHZ_BALANCE_KICK is already set and no Idle Load Balance will be
performed.
We must wait for the sched softirq to be raised on CPU 2 thanks to another
part the kernel to come back to clear NOHZ_BALANCE_KICK.
The proposed solution clears NOHZ_BALANCE_KICK in schedule_ipi if
we can't raise the sched_softirq for the Idle Load Balance.
Change since V1:
- move the clear of NOHZ_BALANCE_KICK in got_nohz_idle_kick if the ILB
can't run on this CPU (as suggested by Peter)
perf/x86: Fix broken PEBS-LL support on SNB-EP/IVB-EP
This patch fixes broken support of PEBS-LL on SNB-EP/IVB-EP.
For some reason, the LDLAT extra reg definition for snb_ep
showed up as duplicate in the snb table.
This patch moves the definition of LDLAT back into the
snb_ep table.
Peter Zijlstra [Tue, 4 Jun 2013 08:44:21 +0000 (10:44 +0200)]
perf: Fix mmap() accounting hole
Vince's fuzzer once again found holes. This time it spotted a leak in
the locked page accounting.
When an event had redirected output and its close() was the last
reference to the buffer we didn't have a vm context to undo accounting.
Change the code to destroy the buffer on the last munmap() and detach
all redirected events at that time. This provides us the right context
to undo the vm accounting.
Igor Mammedov [Mon, 10 Jun 2013 16:31:11 +0000 (18:31 +0200)]
x86: kvmclock: zero initialize pvclock shared memory area
kernel might hung in pvclock_clocksource_read() due to
uninitialized memory might contain odd version value in
following cycle:
do {
version = __pvclock_read_cycles(src, &ret, &flags);
} while ((src->version & 1) || version != src->version);
if secondary kvmclock is accessed before it's registered with kvm.
Clear garbage in pvclock shared memory area right after it's
allocated to avoid this issue.
Ref: https://bugzilla.kernel.org/show_bug.cgi?id=59521 Signed-off-by: Igor Mammedov <imammedo@redhat.com>
[See BZ for analysis. We may want a different fix for 3.11, but
this is the safest for now - Paolo] Cc: <stable@vger.kernel.org> # 3.8 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Scott Wood [Tue, 11 Jun 2013 16:38:31 +0000 (11:38 -0500)]
kvm/ppc/booke: Delay kvmppc_lazy_ee_enable
kwmppc_lazy_ee_enable() should be called as late as possible,
or else we get things like WARN_ON(preemptible()) in enable_kernel_fp()
in configurations where preemptible() works.
Note that book3s_pr already waits until just before __kvmppc_vcpu_run
to call kvmppc_lazy_ee_enable().
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dave Kleikamp [Tue, 18 Jun 2013 14:05:36 +0000 (09:05 -0500)]
sparc: tsb must be flushed before tlb
This fixes a race where a cpu may re-load a tlb from a stale tsb right
after it has been flushed by a remote function call.
I still see some instability when stressing the system with parallel
kernel builds while creating memory pressure by writing to
/proc/sys/vm/nr_hugepages, but this patch improves the stability
significantly.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Acked-by: Bob Picco <bob.picco@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tushar Behera [Mon, 17 Jun 2013 09:07:44 +0000 (14:37 +0530)]
sparc,leon: Convert to use devm_ioremap_resource
Commit 75096579c3ac ("lib: devres: Introduce devm_ioremap_resource()")
introduced devm_ioremap_resource() and deprecated the use of
devm_request_and_ioremap().
While at it, also remove the error message as devm_ioremap_resource()
also prints similar error message.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org> CC: sparclinux@vger.kernel.org CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
bob picco [Tue, 11 Jun 2013 18:54:51 +0000 (14:54 -0400)]
sparc64 address-congruence property
The Machine Description (MD) property "address-congruence-offset" is
optional. According to the MD specification the value is assumed 0UL when
not present. This caused early boot failure on T5.
Signed-off-by: Bob Picco <bob.picco@oracle.com> CC: sparclinux@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Larsson [Mon, 10 Jun 2013 06:56:41 +0000 (08:56 +0200)]
sparc32, leon: Enable interrupts before going idle to avoid getting stuck
This enables interrupts for Leon before having the CPU enter power-down mode.
Commit 87fa05aeb3a5e8e21b1a5510eef6983650eff092, "sparc: Use generic idle loop",
gets the CPU stuck on idle for Leon systems. On Leon, disabling interrupts and
powering down the processor will get the processor stuck waiting for an
interrupt that will never be reacted to.
Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Larsson [Mon, 10 Jun 2013 06:53:28 +0000 (08:53 +0200)]
sparc32, leon: Remove separate "ticker" timer for SMP
This reduces the need from two timers to one timer.
Moreover, without this patch, when the "ticker" timer triggers timer_cs_read via
tick_periodic it reads the value of the usual timer it can get an wrapped timer
value without timer_cs_internal_counter having been updated leading to the clock
going backwards. This effectively hangs one cpu that gets stuck in
update_wall_time with an offset slightly smaller than 0xffffffffffffffff.
Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Zhao Hongjiang [Sun, 9 Jun 2013 08:57:58 +0000 (16:57 +0800)]
sparc: kernel: using strlcpy() instead of strcpy()
'boot_command_line' and 'full_boot_str' has a fix length, 'cmdline_p' and
'boot_command' maybe larger than them. So use strlcpy() instead of strcpy()
to avoid memory overflow.
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Chen Gang [Thu, 30 May 2013 03:35:22 +0000 (11:35 +0800)]
arch: sparc: prom: looping issue, need additional length check in the outside looping
When "cp >= barg_buf + BARG_LEN-2", it breaks internel looping 'while',
but outside loop 'for' still has effect, so "*cp++ = ' '" will continue
repeating which may cause memory overflow.
So need additional length check for it in the outside looping.
Also beautify the related code which found by "./scripts/checkpatch.pl"
Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Airlie [Wed, 19 Jun 2013 01:48:36 +0000 (11:48 +1000)]
Merge branch 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Alex writes:
Remove some harmless but confusing VM related error messages
fix a regression with suspend and UVD,
fix UVD on big endian.
* 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: fix UVD on big endian
drm/radeon: fix write back suspend regression with uvd v2
drm/radeon: do not try to uselessly update virtual memory pagetable
Randy Dunlap [Tue, 18 Jun 2013 19:33:40 +0000 (12:33 -0700)]
x86: fix build error and kconfig for ia32_emulation and binfmt
Fix kconfig warning and build errors on x86_64 by selecting BINFMT_ELF
when COMPAT_BINFMT_ELF is being selected.
warning: (IA32_EMULATION) selects COMPAT_BINFMT_ELF which has unmet direct dependencies (COMPAT && BINFMT_ELF)
fs/built-in.o: In function `elf_core_dump':
compat_binfmt_elf.c:(.text+0x3e093): undefined reference to `elf_core_extra_phdrs'
compat_binfmt_elf.c:(.text+0x3ebcd): undefined reference to `elf_core_extra_data_size'
compat_binfmt_elf.c:(.text+0x3eddd): undefined reference to `elf_core_write_extra_phdrs'
compat_binfmt_elf.c:(.text+0x3f004): undefined reference to `elf_core_write_extra_data'
[ hpa: This was sent to me for -next but it is a low risk build fix ]
Chander Kashyap [Tue, 18 Jun 2013 15:29:35 +0000 (00:29 +0900)]
clocksource: exynos_mct: use (request/free)_irq calls for local timer registration
Replace the (setup/remove)_irq calls for local timer registration with
(request/free)_irq calls. This generalizes the local timer registration API.
Suggested by Mark Rutland.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Chander Kashyap [Tue, 18 Jun 2013 15:29:34 +0000 (00:29 +0900)]
clk: exynos5420: register clocks using common clock framework
The EXYNOS5420 clocks are statically listed and registered using
the Samsung specific common clock helper functions.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Chander Kashyap [Tue, 18 Jun 2013 15:29:34 +0000 (00:29 +0900)]
ARM: EXYNOS: use four additional chipid bits to identify EXYNOS family
Use chipid[27:20] bits to identify the EXYNOS family while setting
up the serial port during the uncompression setup. This uses four
additional bits of chipid to identify the EXYNOS family since this
is required for identifying EXYNOS5420 SoC.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Chander Kashyap [Tue, 18 Jun 2013 15:29:34 +0000 (00:29 +0900)]
serial: samsung: select EXYNOS specific driver data if ARCH_EXYNOS is defined
All EXYNOS4/5 SoCs share a common driver data in the samsung serial
driver. Hence, let the driver data inclusion be based on ARCH_EXYNOS
instead of SOC specific definition.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed by: Girish K S <ks.giri@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Chander Kashyap [Tue, 18 Jun 2013 15:29:34 +0000 (00:29 +0900)]
ARM: EXYNOS: Add support for EXYNOS5420 SoC
EXYNOS5420 is new SoC in Samsung's Exynos5 SoC series. Add
initial support for this new SoC.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Chander Kashyap [Tue, 18 Jun 2013 15:29:34 +0000 (00:29 +0900)]
ARM: dts: list the CPU nodes for EXYNOS5250
Instead of having to specify the number for CPUs in EXYNOS5250 in
platsmp.c file, let the number of CPUs be determined by having this
information listed in EXYNOS5250 device tree file.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Chander Kashyap [Tue, 18 Jun 2013 15:29:34 +0000 (00:29 +0900)]
ARM: dts: fork out common EXYNOS5 nodes
In preparation of adding support for EXYNOS5420, which has many
peripherals similar to EXYNOS5250, a new common EXYNOS5 device tree
source file is created out of the exising EXYNOS5250 device tree
source file. Only the common nodes required for basic boot up on
EXYNOS5420 based boards are moved into this new file and the rest
of the common nodes would be moved subsequently.
EXYNOS5440 SoC is quite different from EXYNOS5250 and EXYNOS5420.
Hence it is not possible to reuse "exynos5.dtsi" for EXYNOS5440.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Doug Anderson [Mon, 10 Jun 2013 09:26:53 +0000 (18:26 +0900)]
ARM: EXYNOS: Select PINCTRL_EXYNOS for exynos4/5 at chip level
Previously if you had MACH_EXYNOS5_DT but not MACH_EXYNOS4_DT you'd be
missing the pincontrol definitions. Move PINCTRL selects to the arch
level since we should be enabling the code for all exynos variants.
Update the PINCTRL descriptions to indicate that PINCTRL_EXYNOS is not
for exynos5440. Also add basic dependencies for the PINCTRL_EXYNOS
kernel config.
Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
parisc: Use unshadowed index register for flush instructions in flush_dcache_page_asm and flush_icache_page_asm
The comment at the start of pacache.S states that the base and index
registers used for fdc,fic, and pdc instructions should not use shadowed
registers. Although this is probably unnecessary for tmpalias flushes,
there is also no reason not to comply.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
The C8000 workstation (64 bit kernel only) has a somewhat different
serial port configuration than other models.
Thomas Bogendoerfer sent a patch to fix this in September 2010, which
was now minimally modified by me.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Helge Deller <deller@gmx.de>
Padmavathi Venna [Mon, 17 Jun 2013 15:02:36 +0000 (00:02 +0900)]
clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2
This patch adds enum entries for div_i2s1 and div_i2s2 which are
required for i2s1 and i2s2 controllers.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Padmavathi Venna [Mon, 17 Jun 2013 15:02:17 +0000 (00:02 +0900)]
clk: samsung: register audio subsystem clocks using common clock framework
Audio subsystem is introduced in s5pv210 and exynos platforms.
This has seperate clock controller which can control i2s0 and
pcm0 clocks. This patch registers the audio subsystem clocks
with the common clock framework on Exynos family.
Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
projects / karo-tx-linux.git / log