Albert Lee [Tue, 1 Nov 2005 11:33:20 +0000 (19:33 +0800)]
[PATCH] libata irq-pio: add read/write multiple support
- add is_multi_taskfile() to ata.h
- initialize ata_device->multi_count with device identify data
- use ata_pio_sectors() to support r/w multiple commands
Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
======== Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Albert Lee [Tue, 1 Nov 2005 11:30:05 +0000 (19:30 +0800)]
[PATCH] libata irq-pio: eliminate unnecessary queuing in ata_pio_first_block()
- change the return value of ata_pio_complete() 0 <-> 1
- add return value for ata_pio_first_block()
- rename variable "qc_completed" to "has_next" in ata_pio_task()
- use has_next to eliminate unnecessary queuing in ata_pio_first_block()
Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
========== Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Albert Lee [Tue, 1 Nov 2005 11:24:49 +0000 (19:24 +0800)]
[PATCH] libata irq-pio: merge the ata_dataout_task workqueue with ata_pio_task workqueue
- remove ap->dataout_task from struct ata_port
- let ata_pio_task() handle the HSM_ST_FIRST state.
- rename ata_dataout_task() to ata_pio_first_block()
- replace the ata_dataout_task workqueue with ata_pio_task workqueue
Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
======== Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Albert Lee [Tue, 1 Nov 2005 11:19:01 +0000 (19:19 +0800)]
[PATCH] libata irq-pio: misc fixes
- ata_pio_block(): add ata_altstatus(ap) to prevent reading device status before it is valid
- remove the unnecessary HSM_ST_IDLE state from ata_pio_task()
- raise BUG() when unknown state is found in ata_pio_task()
Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
============ Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
You could open the /proc/sys/net/ipv4/conf/<if>/<whatever> file, then
wait for interface to go away, try to grab as much memory as possible in
hope to hit the (kfreed) ctl_table. Then fill it with pointers to your
function. Then do read from file you've opened and if you are lucky,
you'll get it called as ->proc_handler() in kernel mode.
So this is at least an Oops and possibly more. It does depend on an
interface going away though, so less of a security risk than it would
otherwise be.
Oleg Nesterov [Mon, 7 Nov 2005 18:12:43 +0000 (21:12 +0300)]
[PATCH] fix de_thread() vs send_group_sigqueue() race
When non-leader thread does exec, de_thread calls release_task(leader) before
calling exit_itimers(). If local timer interrupt happens in between, it can
oops in send_group_sigqueue() while taking ->sighand->siglock == NULL.
However, we can't change send_group_sigqueue() to check p->signal != NULL,
because sys_timer_create() does get_task_struct() only in SIGEV_THREAD_ID
case. So it is possible that this task_struct was already freed and we can't
trust p->signal.
This patch changes de_thread() so that leader released after exit_itimers()
call.
This patch updates the tosa machine to use the new SharpSL PCMCIA layer introduced with Patch #3093/1
Depends on #3093/1
Signed-off-by: Dirk Opfer <Dirk@Opfer-Online.de> Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Richard Purdie [Tue, 8 Nov 2005 19:15:43 +0000 (19:15 +0000)]
[ARM] 3093/1: SharpSL PCMCIA Updates for Cxx00 models
Patch from Richard Purdie
The Sharp SL-Cxx00 models have a combined power control for the SD
and CF slot 0. This patch adds hooks to the scoop driver to allow
machines to provide a custom control function for this and such a
function is added for spitz/akita/borzoi.
It also moves the gpio init code into the machine files as this
is machine dependent and differs between some models. A couple of
warnings when compiling for collie are also fixed.
Signed-off-by: Richard Purdie Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Marcel Holtmann [Tue, 8 Nov 2005 17:57:38 +0000 (09:57 -0800)]
[Bluetooth]: Remove the usage of /proc completely
This patch removes all relics of the /proc usage from the Bluetooth
subsystem core and its upper layers. All the previous information are
now available via /sys/class/bluetooth through appropriate functions.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Marcel Holtmann [Tue, 8 Nov 2005 17:57:05 +0000 (09:57 -0800)]
[Bluetooth]: Add another ignore parameter to the HCI USB driver
This patchs adds the module parameter ignore_dga to the HCI USB driver
which makes it possible to prevent this driver from being loaded by
some buggy Digianswer devices.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Tue, 8 Nov 2005 17:41:56 +0000 (09:41 -0800)]
[IPV4]: Fix ip_queue_xmit identity increment for TSO packets
When ip_queue_xmit calls ip_select_ident_more for IP identity selection
it gives it the wrong packet count for TSO packets. The ip_select_*
functions expect one less than the number of packets, so we need to
subtract one for TSO packets.
This bug was diagnosed and fixed by Tom Young.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Domsch [Tue, 8 Nov 2005 17:40:47 +0000 (09:40 -0800)]
[PPP]: add PPP MPPE encryption module
From: Matt Domsch <Matt_Domsch@dell.com>
The patch below implements the Microsoft Point-to-Point Encryption method
as a PPP compressor/decompressor. This is necessary for Linux clients and
servers to interoperate with Microsoft Point-to-Point Tunneling Protocol
(PPTP) servers (either Microsoft PPTP servers or the poptop project) which
use MPPE to encrypt data when creating a VPN.
This patch differs from the kernel_ppp_mppe DKMS pacakge at
pptpclient.sourceforge.net by utilizing the kernel crypto routines rather
than providing its own SHA1 and arcfour implementations.
Minor changes to ppp_generic.c try to prevent a link from disabling
compression (in our case, the encryption) after it has started using
compression (encryption).
Feedback to <pptpclient-devel@lists.sourceforge.net> please.
Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Cc: James Cameron <james.cameron@hp.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch avoids ppp-generated kernel crashes on machines where unaligned
accesses are forbidden (ie: m68000), by fixing ppp alignment setting for
reused skb's.
Signed-off-by: Philippe De Muyter <phdm@macqel.be> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
[IPVS]: fix connection leak if expire_nodest_conn=1
There was a fix in 2.6.13 that changed the behaviour of
ip_vs_conn_expire_now function not to put reference to connection,
its callers should hold write lock or connection refcnt. But we
forgot to convert one caller, when the real server for connection
is unavailable caller should put the connection reference. It
happens only when sysctl var expire_nodest_conn is set to 1 and
such connections never expire. Thanks to Roberto Nibali who found
the problem and tested a 2.4.32-rc2 patch, which is equal to this
2.6 version. Patch for 2.4 is already sent to Marcelo.
Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Roberto Nibali <ratz@drugphish.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 8 Nov 2005 14:44:15 +0000 (14:44 +0000)]
[ARM] More sparse fixes
arch/arm/kernel/irq.c:998:26: warning: Using plain integer as NULL pointer
arch/arm/kernel/smp.c:145:25: warning: Using plain integer as NULL pointer
arch/arm/kernel/smp.c:362:5: warning: symbol 'smp_call_function_on_cpu' was not declared. Should it be static?
drivers/video/amba-clcd.c:521:12: warning: symbol 'amba_clcdfb_init' was not declared. Should it be static?
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 8 Nov 2005 10:40:10 +0000 (10:40 +0000)]
[ARM SMP] Add missing SMP timer handling for realview
Until we have local timer support, we need to broadcast the
timer interrupt to the other CPUs. Also, add the missing
smp_send_timer() prototype to asm/smp.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ram Pai [Mon, 7 Nov 2005 22:21:20 +0000 (17:21 -0500)]
[PATCH] unbindable mounts
An unbindable mount does not forward or receive propagation. Also
unbindable mount disallows bind mounts. The semantics is as follows.
Bind semantics:
It is invalid to bind mount an unbindable mount.
Move semantics:
It is invalid to move an unbindable mount under shared mount.
Clone-namespace semantics:
If a mount is unbindable in the parent namespace, the corresponding
cloned mount in the child namespace becomes unbindable too. Note:
there is subtle difference, unbindable mounts cannot be bind mounted
but can be cloned during clone-namespace.
Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ram Pai [Mon, 7 Nov 2005 22:21:01 +0000 (17:21 -0500)]
[PATCH] handling of slave mounts
This makes bind, rbind, move, clone namespace and umount operations
aware of the semantics of slave mount (see Documentation/sharedsubtree.txt
in the last patch of the series for detailed description).
Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ram Pai [Mon, 7 Nov 2005 22:20:48 +0000 (17:20 -0500)]
[PATCH] introduce slave mounts
A slave mount always has a master mount from which it receives
mount/umount events. Unlike shared mount the event propagation does not
flow from the slave mount to the master.
Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ram Pai [Mon, 7 Nov 2005 22:20:03 +0000 (17:20 -0500)]
[PATCH] shared mounts handling: move
Implement handling of mount --move in presense of shared mounts (see
Documentation/sharedsubtree.txt in the end of patch series for detailed
description).
Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ram Pai [Mon, 7 Nov 2005 22:19:33 +0000 (17:19 -0500)]
[PATCH] introduce shared mounts
This creates shared mounts. A shared mount when bind-mounted to some
mountpoint, propagates mount/umount events to each other. All the
shared mounts that propagate events to each other belong to the same
peer-group.
Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ram Pai [Mon, 7 Nov 2005 22:17:22 +0000 (17:17 -0500)]
[PATCH] mount expiry fixes
- clean up the ugliness in may_umount_tree()
- fix a bug in do_loopback(). after cloning a tree, do_loopback()
unlinks only the topmost mount of the cloned tree, leaving behind the
children mounts on their corresponding expiry list.
Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ram Pai [Mon, 7 Nov 2005 22:17:04 +0000 (17:17 -0500)]
[PATCH] umount_tree() locking change
umount is done under the protection of the namespace semaphore. This
can lead to intresting deadlocks when the last reference to a mount is
released, if filesystem code is in sufficiently nasty state.
This collects all the to-be-released-mounts and releases them after
releasing the namespace semaphore. That both reduces the time we are
holding namespace semaphore and gets the things more robust.
Idea proposed by Al Viro.
Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Mon, 7 Nov 2005 22:15:34 +0000 (17:15 -0500)]
[PATCH] allow callers of seq_open do allocation themselves
Allow caller of seq_open() to kmalloc() seq_file + whatever else they
want and set ->private_data to it. seq_open() will then abstain from
doing allocation itself.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Mon, 7 Nov 2005 22:15:04 +0000 (17:15 -0500)]
[PATCH] cleanups and bug fix in do_loopback()
- check_mnt() on the source of binding should've been unconditional
from the very beginning. My fault - as far I could've trace it,
that's an old thinko made back in 2001. Kudos to Miklos for spotting
it...
Fixed.
- code cleaned up.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Al Viro [Mon, 7 Nov 2005 22:13:39 +0000 (17:13 -0500)]
[PATCH] saner handling of auto_acct_off() and DQUOT_OFF() in umount
The way we currently deal with quota and process accounting that might
keep vfsmount busy at umount time is inherently broken; we try to turn
them off just in case (not quite correctly, at that) and
a) pray umount doesn't fail (otherwise they'll stay turned off)
b) pray nobody doesn anything funny just as we turn quota off
Moreover, LSM provides hooks for doing the same sort of broken logics.
The proper way to deal with that is to introduce the second kind of
reference to vfsmount. Semantics:
- when the last normal reference is dropped, all special ones are
converted to normal ones and if there had been any, cleanup is done.
- normal reference can be cloned into a special one
- special reference can be converted to normal one; that's a no-op if
we'd already passed the point of no return (i.e. mntput() had
converted special references to normal and started cleanup).
The way it works: e.g. starting process accounting converts the vfsmount
reference pinned by the opened file into special one and turns it back
to normal when it gets shut down; acct_auto_close() is done when no
normal references are left. That way it does *not* obstruct umount(2)
and it silently gets turned off when the last normal reference to
vfsmount is gone. Which is exactly what we want...
The same should be done by LSM module that holds some internal
references to vfsmount and wants to shut them down on umount - it should
make them special and security_sb_umount_close() will be called exactly
when the last normal reference to vfsmount is gone.
quota handling is even simpler - we don't use normal file IO anymore, so
there's no need to hold vfsmounts at all. DQUOT_OFF() is done from
deactivate_super(), where it really belongs.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] ppc64: Fix the lazy icache/dcache code for non-RAM pages
For some stupid reason I can't explain (brown paper bag is at hand), I
removed the check pfn_valid() in the code that does the icache/dcache
coherency on POWER4 and later. That causes us to eventually try to
access non existing struct page when hashing in IO pages.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Mike Kravetz [Mon, 7 Nov 2005 21:48:59 +0000 (13:48 -0800)]
[PATCH] Memory Add Fixes for ppc64
On Tue, Nov 08, 2005 at 08:12:56AM +1100, Benjamin Herrenschmidt wrote:
> Yes, the MAX_ORDER should be different indeed. But can Kconfig do that ?
> That is have the default value be different based on a Kconfig option ?
> I don't see that ... We may have to do things differently here...
This seems to be done in other parts of the Kconfig file. Using those
as an example, this should keep the MAX_ORDER block size at 16MB.
Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
It turns out the section ordering of the linker script is different on
ppc32 and ppc64, so just count data as _edata - _sdata which should work
on both.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
[PATCH] ppc64: Thermal control for SMU based machines
This adds a new thermal control framework for PowerMac, along with the
implementation for PowerMac8,1, PowerMac8,2 (iMac G5 rev 1 and 2), and
PowerMac9,1 (latest single CPU desktop). In the future, I expect to move
the older G5 thermal control to the new framework as well.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
[PATCH] ppc64: Update g5_defconfig for ARCH=powerpc
This patch updates g5_defconfig for ARCH=powerpc in order to add the SMU
support & thermal drivers to it, the pmac sound driver (works on some
G5s) and replaces rivafb with nvidiafb which works better for the cards
found in G5 based machines.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
This patch adds the ability to the SMU driver to recover missing
calibration partitions from the SMU chip itself. It also adds some
dynamic mecanism to /proc/device-tree so that new properties are visible
to userland.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
David Woodhouse [Wed, 2 Nov 2005 22:34:20 +0000 (22:34 +0000)]
[PATCH] powerpc: Fix ppc32 initrd
OK, the Fedora ppc32 and ppc64 kernels should both be arch/powerpc by
tomorrow. They're booting on G5, POWER5, and my powerbook. I'll test
pmac SMP and Pegasos later -- but pmac smp is known broken in arch/ppc
anyway, and I'll live with a potential Pegasos regression for now; it
wasn't supported officially in FC4 either.
I needed to fix ppc32 initrd -- we were never setting initrd_start.
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
implement a compat_ioctl handle in the driver instead of having table
entries in sparc64 ioctl32.c (I plan to get rid of the arch ioctl32.c
file eventually)
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Hugh Dickins [Mon, 7 Nov 2005 22:12:08 +0000 (14:12 -0800)]
[SPARC64] mm: simpler tlb_flush_mmu
Minor simplification to the sparc64 tlb_flush_mmu: tlb_remove_page
set need_flush only after handling the tlb_fast_mode case, then
tlb_flush_mmu need not consider whether it's tlb_fast_mode.
Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 7 Nov 2005 22:10:10 +0000 (14:10 -0800)]
[SPARC64]: Kill off dummy_tick_ops.
It only serves to generate false-positive buildcheck warnings.
Just set it initially to tick_operations which uses the v9
%tick register which every sparc64 processor has.
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-beck.git / log