Stop building scsi_dh as a separate module and integrate it fully into the
core SCSI code with explicit callouts at bus scan time. For now the
callouts are placed at the same point as the old bus notifiers were called,
but in the future we will be able to look at ALUA INQUIRY data earlier on.
Note that this also means that the device handler modules need to be loaded
by the time we scan the bus. The next patches will add support for
autoloading device handlers at bus scan time to make sure they are always
loaded if they are enabled in the kernel config.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
dm-mpath, scsi_dh: request scsi_dh modules in scsi_dh, not dm-mpath
This way we can reused the same code any attachment method, not just those
requested from dm-mpath.
[jejb: fixup checkpatch error] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
dm-mpath, scsi_dh: don't let dm detach device handlers
While allowing dm-mpath to attach device handlers is a functionality we need
for backwards compatibility reason there is no reason to reference count
them and detach them if dm-mpath stops using the device for some reason.
If the device handler works for the given device it can just stay attached,
and we can take the retain_hw_handler codepath.
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Hannes Reinecke <hare@Suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Hannes Reinecke [Mon, 6 Jul 2015 11:07:58 +0000 (13:07 +0200)]
aic94xx: Skip reading user settings if flash is not found
If no user settings are found it's pointless trying to
read them from flash. So skip that step.
This also fixes a compilation warning about uninitialized variables in
aic94xx.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Remove unnecessary check that disabled SIS pipe commands for SIS-32
devices. This change was sufficient to enable raw mode and send SIS
pipe commands for a 57B3 device.
Fixes: f8ee25d7d239 ("ipr: AF DASD raw mode implementation in ipr driver") Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
ipr: Inhibit underlength data check for AFDASD in raw mode.
Disable underlength error verification based on count of bytes actually
transferred for AF DASD devices when SIS pipe mode is enabled.
This avoids unexpected underlength errors when issuing some commands in
raw mode.
Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sreekanth Reddy [Tue, 30 Jun 2015 06:55:06 +0000 (12:25 +0530)]
mpt3sas : Bump mpt3sas driver version to 9.100.00.00
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sreekanth Reddy [Tue, 30 Jun 2015 06:55:05 +0000 (12:25 +0530)]
mpt3sas: When device is blocked followed by unblock fails, unfreeze the I/Os
Issue: When the disks are getting discovered and assigned device
handles by the kernel, a device block followed by an unblock
(due to broadcast primitives) issued by the driver is
interspersed by the kernel changing the state of the device.
Therefore the unblock by the driver results in a no operation
within the kernel API.
To fix this one, the below patch checks the return of the unblock API
and performs a block followed by an unblock to unfreeze the block
layer's I/O queue. Sufficient checks and prints are also added in the
driver to identify this condition caused by the kernel.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sreekanth Reddy [Tue, 30 Jun 2015 06:55:04 +0000 (12:25 +0530)]
mpt3sas: Call dma_mapping_error() API after mapping an address with dma_map_single() API
Added dma_mapping_error() API after mapping an address with dma_map_single()
API. Otherwise when CONFIG_DMA_API_DEBUG is enabled in the kernel, then it
complains about mpt3sas driver not calling dma_mapping_error after mapping an
address with dma_map_single
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sreekanth Reddy [Tue, 30 Jun 2015 06:55:03 +0000 (12:25 +0530)]
mpt3sas: Use alloc_ordered_workqueue() API instead of create_singlethread_workqueue() API
Created a thread using alloc_ordered_workqueue() API in order to process
the works from firmware Work-queue sequentially instead of
create_singlethread_workqueue() API.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sreekanth Reddy [Tue, 30 Jun 2015 06:55:01 +0000 (12:25 +0530)]
mpt3sas: Return host busy error status to SML when DMA mapping of scatter gather list fails for a SCSI command
scsi_dma_map API will return a negative value (i.e. -ENOMEM)
if DMA mapping of sg lists fails and zero if the sg list in the
SCSI cmd is NULL. But drivers doesn't handled sg list DMA mapping
failure case properly.
So, Updated the code to return host busy error status to SCSI MID Layer(SML),
when DMA mapping of scatter gather list fails for a SCSI command.
So that SML will retry this SCSI cmd after some time.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sreekanth Reddy [Tue, 30 Jun 2015 06:55:00 +0000 (12:25 +0530)]
mpt3sas: Complete the SCSI command with DID_RESET status for log_info value 0x0x32010081
For any SCSI command, if the driver receives
IOC status = SCSI_IOC_TERMINATED and log info = 0x32010081 then
that command will be completed with DID_RESET host status.
The definition of this log info value is
"Virtual IO has failed and has to be retried".
Firmware will provide this log info value with IOC Status
"SCSI_IOC_TERMINATED", whenever a drive (with is a part of a volume)
is pulled and pushed back within some minimal delay.
With this log info value, firmware informs the driver to retry the
failed IO command infinite times, so to provide some time for the
firmware to discover the reinserted drive successfully instated of
just retrying failed command for five times(doesn't giving enough
time for firmware to complete the drive discovery) and failing the
IO permanently even though drive came back successfully.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sreekanth Reddy [Tue, 30 Jun 2015 06:54:59 +0000 (12:24 +0530)]
mpt3sas: MPI 2.5 Rev K (2.5.6) specifications
Below are the new changes to MPI 2.5 Rev K(2.5.6) specification and 2.00.35
header files
1) Added a minimum size requirement for target mode command buffers.
2) Added MinMSIxIndex and MaxMSIxIndex fields to CommandBufferPostBase
Request.
3) For BIOS Page 1, added SSUTimeout field, and added Product Name String
Format bits to the BiosOptions field
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sreekanth Reddy [Tue, 30 Jun 2015 06:54:58 +0000 (12:24 +0530)]
mpt3sas: Bump mpt3sas driver version to v6.100.00.00
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sreekanth Reddy [Tue, 30 Jun 2015 06:54:54 +0000 (12:24 +0530)]
mpt3sas: Update MPI2 strings to MPI2.5
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sreekanth Reddy [Tue, 30 Jun 2015 06:54:53 +0000 (12:24 +0530)]
mpt3sas: Bump mpt3sas Driver version to v5.100.00.00
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sreekanth Reddy [Tue, 30 Jun 2015 06:54:52 +0000 (12:24 +0530)]
mpt3sas: Provides the physical location of sas drives
This Patch will provide more details of the devices such as slot number,
enclosure logical id, enclosure level & connector name in the following
scenarios,
- When end device is added in the topology,
- When the end device is removed from the setup,
- When the SCSI mid layer issues TASK ABORT/ DEVICE RESET/ TARGET RESET during
error handling,
- When any command to the device fails with Sense key Hardware error or Medium
error or Unit Attention,
- When firmware returns device error or device not ready status for the end
device,
- When a Predicted fault is detected on an end device.
This information can be used by the user to identify the location of the
desired drive in the topology.
Driver will get these information by reading the sas device page0.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sreekanth Reddy [Tue, 30 Jun 2015 06:54:51 +0000 (12:24 +0530)]
mpt3sas: MPI 2.5 Rev I (2.5.4) specifications.
Update MPI 2.5 Release: MPI 2.5 Rev I (2.5.4) specification and 2.00.33 header
files
Below is the change set from the MPI specification for I Rev
1) Added Base Enclosure Level bit to the Flags field of Manufacturing Page 7.
2) Updated description of the MaxTargetPortConnectTime field of SAS IO Unit
Page 1.
3) Added EnclosureLevel and ConnectorName fields to SAS Device Page 0. Also,
added EnclosureLevel and ConnectorName Valid bit to the Flags field.
4) Added EnclosureLevel field to SAS Enclosure Page 0. Also, added
EnclosureLevel Valid bit to the Flags field.
5) Added value for BIOS image to HashImageType.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sreekanth Reddy [Tue, 30 Jun 2015 06:54:50 +0000 (12:24 +0530)]
mpt3sas: Remove redundancy code while freeing the controller resources.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sreekanth Reddy [Tue, 30 Jun 2015 06:54:49 +0000 (12:24 +0530)]
mpt3sas: Don't block the drive when drive addition under the control of SML
During hot-plugging of a disk(having a flaky link), the disk addition
stops and any further disk addition or removal doesn't happen on that
controller.
This is because, when driver receives DELAY_NOT_RESPONDING event for a disk
while it is undergoing addition at the SCSI Transport layer, the driver
would block the I/O to that disk resulting in a deadlock. i.e the disk
addition work couldn't be completed at the SCSI Transport Layer as it
can't send any I/Os (such as Inquiry, Report LUNs etc) to the disk as
I/Os are blocked to this drive. Also any subsequent device removal
(TARGET_NOT_RESPONDING) or link update(RC_PHY_CHANGED) event couldn't be
processed as they are in the queue to get processed after disk addition
event.
Description of Change:
Don't block the drive when drive addition is under the control of SML.
So that SML won't be blocked of issuing the device dicovery commands
(such as Inquiry, Report LUNs etc).
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sreekanth Reddy [Tue, 30 Jun 2015 06:54:48 +0000 (12:24 +0530)]
mpt3sas: Get IOC_FACTS information using handshake protocol only after HBA card gets into READY or Operational state.
Driver initialization fails if driver tries to send IOC facts request message
when the IOC is in reset or in a fault state.
This patch will make sure that
1.Driver to send IOC facts request message only if HBA is in operational or
ready state.
2.If IOC is in fault state, a diagnostic reset would be issued.
3.If IOC is in reset state then driver will wait for 10 seconds to exit out
of reset state. If the HBA continues to be in reset state, then the HBA
wouldn't be claimed by the driver.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Sreekanth Reddy [Tue, 30 Jun 2015 06:54:47 +0000 (12:24 +0530)]
mpt3sas: Added Combined Reply Queue feature to extend up-to 96 MSIX vector support
In this patch, increased the number of MSIX vector support for SAS3 C0 HBAs to
up-to 96.
Following are changes that are done in this patch
1. This feature is enabled only for SAS3 C0 and higher revision cards and also
only when reply post free queue count is greater than 8.
2. To support this feature 12 SupplementalReplyPostHostIndex system interfaces
are used. MSI-X index numbered from 0 to 7 use the first
SupplementalReplyPostHostIndex system interface to update its corresponding
ReplyPostHostIndex values, MSI-X index numbered from 8 to 15 will use the
second SupplementalReplyPostHostIndex system interface and so on. These 12
SuppementalReplyPostHostIndex system interfaces address are saved in the array
replyPostRegisterIndex[].
3. As each SupplementalReplyPostHostIndex register supports 8 MSI-X
vectors. So MSIxIndex field in these register must contain a value between 0
and 7.
4. After processing the reply descriptors from a reply post free queues then
update the new reply post host index value in ReplyPostHostIndex field and
(msix_index mod 8) value in MSIxIndex field of SupplementalReplyPostHostIndex
register. The Address of this SupplementalReplyPostHostIndex register is
retrived from (msix_index/8)th entry of replyPostRegisterIndex[] array.
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Dan Carpenter [Tue, 18 Aug 2015 09:20:29 +0000 (12:20 +0300)]
aic94xx: set an error code on failure
We recently did some cleanup here and now the static checkers notice
that there is a missing error code when ioremap() fails. Let's set it
to -ENOMEM.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
K. Y. Srinivasan [Thu, 13 Aug 2015 15:43:52 +0000 (08:43 -0700)]
storvsc: Set the error code correctly in failure conditions
In the function storvsc_channel_init(), error code was not getting
set correctly in some of the failure cases. Fix this issue.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Keith Mange [Thu, 13 Aug 2015 15:43:51 +0000 (08:43 -0700)]
storvsc: Allow write_same when host is windows 10
Allow WRITE_SAME for Windows10 and above hosts.
Tested-by: Alex Ng <alexng@microsoft.com> Signed-off-by: Keith Mange <keith.mange@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Keith Mange [Thu, 13 Aug 2015 15:43:50 +0000 (08:43 -0700)]
storvsc: use storage protocol version to determine storage capabilities
Use storage protocol version instead of vmbus protocol
version when determining storage capabilities.
Tested-by: Alex Ng <alexng@microsoft.com> Signed-off-by: Keith Mange <keith.mange@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Keith Mange [Thu, 13 Aug 2015 15:43:49 +0000 (08:43 -0700)]
storvsc: use correct defaults for values determined by protocol negotiation
Use correct defaults for values determined by protocol negotiation,
instead of resetting them with every scsi controller.
Tested-by: Alex Ng <alexng@microsoft.com> Signed-off-by: Keith Mange <keith.mange@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Keith Mange [Thu, 13 Aug 2015 15:43:48 +0000 (08:43 -0700)]
storvsc: Untangle the storage protocol negotiation from the vmbus protocol negotiation.
Currently we are making decisions based on vmbus protocol versions
that have been negotiated; use storage potocol versions instead.
[jejb: fold ARRAY_SIZE conversion suggested by Johannes Thumshirn
<jthumshirn@suse.de>
make vmstor_protocol static] Tested-by: Alex Ng <alexng@microsoft.com> Signed-off-by: Keith Mange <keith.mange@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Keith Mange [Thu, 13 Aug 2015 15:43:47 +0000 (08:43 -0700)]
storvsc: Use a single value to track protocol versions
Use a single value to track protocol versions to simplify
comparisons and to be consistent with vmbus version tracking.
Tested-by: Alex Ng <alexng@microsoft.com> Signed-off-by: Keith Mange <keith.mange@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Keith Mange [Thu, 13 Aug 2015 15:43:46 +0000 (08:43 -0700)]
storvsc: Rather than look for sets of specific protocol versions, make decisions based on ranges.
Rather than look for sets of specific protocol versions,
make decisions based on ranges. This will be safer and require fewer changes
going forward as we add more storage protocol versions.
Tested-by: Alex Ng <alexng@microsoft.com> Signed-off-by: Keith Mange <keith.mange@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Matthew R. Ochs [Wed, 26 Aug 2015 23:36:12 +0000 (18:36 -0500)]
cxlflash: Remove unused variable from queuecommand
The queuecommand routine has a local dev pointer used for the
dev_* prints. The two prints that currently exist are tucked
under a debug define and thus can be left out. Use the actual
location instead of a local to avoid this warning.
This patch is intended to be applied after the "CXL Flash Error
Recovery and Superpipe" series.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Dan Carpenter [Tue, 18 Aug 2015 08:57:43 +0000 (11:57 +0300)]
cxlflash: shift wrapping bug in afu_link_reset()
"port_sel" is a u64 so the shifting should also be a 64 bit shift.
Fixes: c21e0bbfc485 ('cxlflash: Base support for IBM CXL Flash Adapter') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Dan Carpenter [Fri, 14 Aug 2015 20:35:25 +0000 (23:35 +0300)]
cxlflash: off by one bug in cxlflash_show_port_status()
The > should be >= or we read one element past the end of the array.
Fixes: c21e0bbfc485 ('cxlflash: Base support for IBM CXL Flash Adapter') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Matthew R. Ochs [Fri, 14 Aug 2015 02:47:53 +0000 (21:47 -0500)]
cxlflash: Virtual LUN support
Add support for physical LUN segmentation (virtual LUNs) to device
driver supporting the IBM CXL Flash adapter. This patch allows user
space applications to virtually segment a physical LUN into N virtual
LUNs, taking advantage of the translation features provided by this
adapter.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com> Reviewed-by: Michael Neuling <mikey@neuling.org> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Matthew R. Ochs [Fri, 14 Aug 2015 02:47:43 +0000 (21:47 -0500)]
cxlflash: Superpipe support
Add superpipe supporting infrastructure to device driver for the IBM CXL
Flash adapter. This patch allows userspace applications to take advantage
of the accelerated I/O features that this adapter provides and bypass the
traditional filesystem stack.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com> Reviewed-by: Michael Neuling <mikey@neuling.org> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Matthew R. Ochs [Fri, 14 Aug 2015 02:47:34 +0000 (21:47 -0500)]
cxlflash: Base error recovery support
Introduce support for enhanced I/O error handling.
A device state is added to track 3 possible states of the device:
Normal - the device is operating normally and is fully operational
Limbo - the device is in a reset/recovery scenario and its operational
status is paused
Failed/terminating - the device has either failed to be reset/recovered
or is being terminated (removed); it is no longer
operational
All operations are allowed when the device is operating normally. When the
device transitions to limbo state, I/O must be paused. To help accomplish
this, a wait queue is introduced where existing and new threads can wait
until the device is no longer in limbo. When coming out of limbo, threads
need to check the state and error out gracefully when encountering the
failed state. When the device transitions to the failed/terminating state,
normal operations are no longer allowed. Only specially designated
operations related to graceful cleanup are permitted.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com> Reviewed-by: Daniel Axtens <dja@axtens.net> Reviewed-by: Michael Neuling <mikey@neuling.org> Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Arun Easi [Tue, 4 Aug 2015 17:38:02 +0000 (13:38 -0400)]
qla2xxx: Fix missing device login retries.
On certain conditions, login failures will just invoke
qla2x00_mark_device_lost() with the intend to do login again;
but if login_retry has been set already, that would fail to set the
relogin needed flag which is required to wakeup the DPC to retry.
Chad Dupuis [Tue, 4 Aug 2015 17:37:57 +0000 (13:37 -0400)]
qla2xxx: Do not reset adapter if SRB handle is in range.
If an SRB is NULL but the handle is in range just drop the
command instead of also resetting the adapter. If the handle
is in range then the command was valid at some point and may
have been aborted. Resetting the adapter can lead to extended
recovery times in this case.
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Hiral Patel [Tue, 4 Aug 2015 17:37:56 +0000 (13:37 -0400)]
qla2xxx: Do not crash system for sp ref count zero
Aovid crashing the system in the scenario where firmware
just completes the command and it can not find the command
during abort mailbox processing. This scenario can lead to
sp reference counter being zero. Instead of crashing the
system, use WARN_ON to print warning in log file.
scsi_error: should not get sense for timeout IO in scsi error handler
scsi_error: should not get sense for timeout IO in scsi error handler
When an IO timeout occurs, the IO will be aborted in
scsi_abort_command() and SCSI_EH_ABORT_SCHEDULED will be set. Because
of that, the SCSI_EH_CANCEL_CMD will be clear in scsi_eh_scmd_add().
So when scsi error handler starts, it will get sense for this
timeout IO and the scmd of the IO request will be reused. In that
case, the scmd may be double released when racing with io_done(),
which will result in crash.
SO SCSI_EH_ABORT_SCHEDULED should also be checked when getting sense.
The bug maybe reproduced when the link between host and disk is
unstable.
Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: Long Chun <long.chun@zte.com.cn> Reviewed-by: Tan Hu <tan.hu@zte.com.cn> Reviewed-by: Chen Donghai <chen.donghai@zte.com.cn> Reviewed-by: Cai Qu <cai.qu@zte.com.cn> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Viswas G [Tue, 11 Aug 2015 09:36:32 +0000 (15:06 +0530)]
pm80xx: Bump pm80xx driver version to 0.1.38
Bump pm80xx driver version to 0.1.38.
Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Viswas G [Tue, 11 Aug 2015 09:36:31 +0000 (15:06 +0530)]
pm80xx: Handling Invalid SSP Response frame
The request has to be retried incase if the length of the SSP
Response IU is invalid.
Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Viswas G [Tue, 11 Aug 2015 09:36:30 +0000 (15:06 +0530)]
pm80xx: Add PORT RECOVERY TIMEOUT support
PORT RECOVERY TIMEOUT is the maximum time between the controller's
detection of the PHY down until the receipt of the ID_Frame (from the
same remote SAS port). If the time expires before the ID_FRAME is
received, the port is considered INVALID and can be removed. The
IOP_EVENT_PORT_RECOVERY_TIMER_TMO event is reported following the
IOP_EVENT_ PHY_DOWN event when the PHY/port does not recover after
Port Recovery Time.
Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Viswas G [Tue, 11 Aug 2015 09:36:29 +0000 (15:06 +0530)]
pm80xx: Remove unnecessary phy disconnect while link error
If the link error happens, we don't need to disconnect the phy,
which will remove the drive. Instead acknowledging the controller
and logging the error will be enough.
Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Viswas G [Tue, 11 Aug 2015 09:36:28 +0000 (15:06 +0530)]
pm80xx: Fix for Incorrect DMA Unmapping of SG List
In pm8001_ccb_task_free(), the dma unmapping is done based on
ccb->n_elem value. This should be initialized to zero in the
task_abort(). Otherwise, pm8001_ccb_task_free() will try for
dma_unmap_sg() which is invalid for task abort and can lead to
kernel crash.
Changes From V1:
None
Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Viswas G [Tue, 11 Aug 2015 09:36:27 +0000 (15:06 +0530)]
pm80xx: Update For Thermal Page Code
Thermal page code has been changed to 7 for the 12G controllers.
Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Viswas G [Tue, 11 Aug 2015 09:36:26 +0000 (15:06 +0530)]
pm80xx: Corrected device state changes in I_T_Nexus_Reset.
In Nexus reset the device state request are not needed.
Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Viswas G [Tue, 11 Aug 2015 09:36:25 +0000 (15:06 +0530)]
pm80xx: Updated link rate
Updated 12G linkrate to libsas.
Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de> Reviewed-by: James Smart <james.smart@avagotech.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
qla2xxx: Return the fabric command state for non-task management requests
Invoking get_cmd_state for qla2xxx always returns 0. Instead change it
to return the actual fabric state from qla_tgt_cmd. This will help with
debugging.
Don Brace [Sat, 18 Jul 2015 16:13:15 +0000 (11:13 -0500)]
hpsa: fix rmmod issues
The driver is calling hpsa_shutdown before calling scsi_remove_host.
hpsa_shutdown is disabling interrupts.
scsi_remove_host can trigger I/O operations, such as
SYNCHRONIZE CACHE when multipath is enabled which hang the system.
Call scsi_remove_host before calling hpsa_shutdown.
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com> Reviewed-by: Scott Teel <scott.teel@pmcs.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
A regression was introduced into the hpsa driver a while back so
non-zero LUNs of multi-LUN devices may no longer be presented via
a SAS based Smart Array. I have not done a bisection to discover
the change that caused it.
The CISS firmware specification (available on sourceforge)
defines an 8 byte lunid that describes devices that the Smart
Array can see/present to the system. The current code in the hpsa
driver attempts to find matches for non-zero LUNs with LUN 0 for
a bus/target by zeroing out byte 4 of the lunid and find a match.
This method is sufficient for SCSI based Smart Arrays because
byte 5 is always 0. For SAS based Smart arrays byte 5 of the
lunid contains the path number for a multipath device and
either one or two bits (the documentation does not define how
many bits are used but it appears it may be one only) that
indicate if the given path number in byte 5 must always be
used to access that device. Byte 5 may not always be zero.
The following are lunids (spaces added for clarity) for a
MSL2024 single drive library connected via a H241 Smart Array:
In the 4th byte (counting from 0) you can see that the tape
is LUN 0 and the changer is LUN 1. The 0x80 set in the 5th byte
for the tape drive means the driver should force access to
path 0 (the library in this case was connected to one path only
anyway).
After the changes we can see the following in the dmesg output:
scsi 0:3:0:0: RAID HP H241 1.18 \
PQ: 0 ANSI: 5
scsi 0:2:0:0: Sequential-Access HP Ultrium 6-SCSI 354W \
PQ: 0 ANSI: 6
scsi 0:2:0:1: Medium Changer HP MSL G3 Series 8.70 \
PQ: 0 ANSI: 5
Showing that the changer is correctly identified as LUN 1 of
bus 2 target 0. Before the change the changer device is not seen.
Suggested-by: shane.seymour <shane.seymour@hp.com> Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com> Reviewed-by: Scott Teel <scott.teel@pmcs.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Scott Benesh [Sat, 18 Jul 2015 16:13:04 +0000 (11:13 -0500)]
hpsa: add in new offline mode
prevent adding volumes that are not available.
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com> Reviewed-by: Scott Teel <scott.teel@pmcs.com> Reviewed-by: Justin Lindley <justin.lindley@pmcs.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Kevin Barnett [Sat, 18 Jul 2015 16:12:59 +0000 (11:12 -0500)]
Change how controllers in mixed mode are handled.
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com> Reviewed-by: Scott Teel <scott.teel@pmcs.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Don Brace [Sat, 18 Jul 2015 16:12:54 +0000 (11:12 -0500)]
hpsa: add in new controllers
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com> Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Don Brace [Sat, 18 Jul 2015 16:12:49 +0000 (11:12 -0500)]
hpsa: cleanup update scsi devices
showing that tables have been updated unnecessarily.
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com> Reviewed-by: Scott Teel <scott.teel@pmcs.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Joe Handzik [Sat, 18 Jul 2015 16:12:43 +0000 (11:12 -0500)]
hpsa: add sysfs entry path_info to show box and bay information
host no, bus, target, lun, scsi_device_type
for hba mode add: box and bay information
report if the path is active/inactive
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com> Reviewed-by: Scott Teel <scott.teel@pmcs.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Don Brace [Sat, 18 Jul 2015 16:12:38 +0000 (11:12 -0500)]
hpsa: add PMC to copyright
need to add PMC to copyright notice and update the Hewlett-Packard
copyright notification.
Reviewed-by: Scott Teel <scott.teel@pmcs.com> Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com> Reviewed-by: Justin Lindley <justin.lindley@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Don Brace [Sat, 18 Jul 2015 16:12:33 +0000 (11:12 -0500)]
hpsa: correct static checker warnings on driver init cleanup
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com> Reviewed-by: Scott Teel <scott.teel@pmcs.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Don Brace [Sat, 18 Jul 2015 16:12:28 +0000 (11:12 -0500)]
hpsa: correct decode sense data
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com> Reviewed-by: Scott Teel <scott.teel@pmcs.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Don Brace [Sat, 18 Jul 2015 16:12:22 +0000 (11:12 -0500)]
hpsa: Correct double unlock of mutex
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Scott Teel <scott.teel@pmcs.com> Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
mpt2sas, mpt3sas: Abort initialization if no memory I/O resources detected
Driver crashes if the BIOS do not set up at least one
memory I/O resource. This failure can happen if the device is too
slow to respond during POST and is missed by the BIOS, but Linux
then detects the device later in the boot process.
Based on a patch from Timothy Pearson <tpearson@raptorengineeringinc.com>
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
The "return QLA_SUCCESS" statement just above the "fw_load_failed"
label cannot be reached, hence remove it. Additionally remove the
"else" keyword since the code block below the if-statement ends
with a return statement.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
This patch removes 21 casts between an __iomem pointer type and
another data type but also introduces five new casts (see also
the casts with "__force"). Although this patch does not change
any functionality, IMHO the code with __force casts needs further
review.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Whether htonl() or __constant_htonl() is used, if the argument
is a constant the conversion happens at compile time. Hence leave
out the __constant_ prefix for this and other endianness
conversion functions. This improves source code readability.
[jejb: checkpatch fixes] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
qla2xxx: Replace two macros with an inline function
Replace the QLA82XX_ADDR_IN_RANGE() and QLA8044_ADDR_IN_RANGE() macros
with the inline function addr_in_range(). This avoids that the compiler
reports the following warning when building with W=1: comparison of
unsigned expression >= 0 is always true.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Destroy st_index_idr on module exit, reclaiming the allocated memory.
This was detected by the following semantic patch (written by Luis Rodriguez
<mcgrof@suse.com>)
<SmPL>
@ defines_module_init @
declarer name module_init, module_exit;
declarer name DEFINE_IDR;
identifier init;
@@
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Hannes Reinecke [Mon, 6 Jul 2015 11:41:53 +0000 (13:41 +0200)]
scsi: Add ALUA state change UA handling
Log the ALUA state change unit attention correctly with
the message log and emit an event to allow user-space
tools to react to it.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Dan Carpenter [Fri, 3 Jul 2015 08:53:03 +0000 (11:53 +0300)]
mptfusion: prevent some memory corruption
These are signed values the come from the user, we put a cap on the
upper bounds but not on the lower bounds.
We use "karg.dataSgeOffset" to calculate "sz". We verify "sz" and
proceed as if that means that "karg.dataSgeOffset" is correct but this
fails to consider that the "sz" calculations can have integer overflows.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
storvsc: use shost_for_each_device() instead of open coding
Comment in struct Scsi_Host says that drivers are not supposed to access
__devices directly. storvsc_host_scan() doesn't happen in irq context
so we can just use shost_for_each_device().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Long Li <longli@microsoft.com> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Vitaly Kuznetsov [Thu, 25 Jun 2015 16:12:11 +0000 (18:12 +0200)]
storvsc: be more picky about scmnd->sc_data_direction
Under the 'default' case in scmnd->sc_data_direction we have 3 options:
- DMA_NONE which we handle correctly.
- DMA_BIDIRECTIONAL which is never supposed to be set by SCSI stack.
- Garbage value.
Do WARN() and return -EINVAL in the last two cases. virtio_scsi does
BUG_ON() here but it looks like an overkill.
Reported-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
Seymour, Shane M [Wed, 24 Jun 2015 06:54:35 +0000 (06:54 +0000)]
st: convert DRIVER_ATTR macros to DRIVER_ATTR_RO
Convert DRIVER_ATTR macros to DRIVER_ATTR_RO requested by
Greg KH. Also switched to using scnprintf instead of snprintf
per Documentation/filesystems/sysfs.txt.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shane Seymour <shane.seymour@hp.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <JBottomley@Odin.com>
linux [Fri, 31 Jul 2015 03:25:55 +0000 (11:25 +0800)]
hptiop: Support HighPoint RR36xx HBAs and Support SAS tape and SAS media changer
Support HighPoint RR36xx HBAs which are based on Marvell Frey.
Support SAS tape and SAS media changer.
[jejb: remove now unused label] Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
projects / linux-beck.git / log