Vince Hsu [Tue, 2 Dec 2014 04:50:33 +0000 (12:50 +0800)]
drm/nouveau/volt: allow non-bios voltage scaling
Move the vbios parsing out of init() and call it conditionally if the
platform has a vbios. Non-vbios platforms can use the ctor() to init the
data structures.
Signed-off-by: Vince Hsu <vinceh@nvidia.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 4 Nov 2014 05:13:30 +0000 (15:13 +1000)]
drm/nouveau/bios: translate ramcfg strap through M0203
A machine has been spotted where the ramcfg strap is "8", and the ramcfg
xlat table goes 0-7,0-7, resulting in us selecting config 0 for memory
items. On this particular system, config "8" is available and supposed
to be used. It appears that starting from GT21x (where Mv2 appears),
we're supposed to use the value in this table instead.
One concern here is that not all the places we currently use ramcfg xlat
are supposed to be treated the same now. The strap xlat table wasn't
removed from the vbios either, presumably for some kind of good reason.
Ben Skeggs [Tue, 4 Nov 2014 02:06:25 +0000 (12:06 +1000)]
drm/nouveau/bios: add parsing of BIT M(v2) +0x03 table
We only support one kind of matching here (ramcfg strap), but it appears
alternate methods are possible. I wrote a tool to scan our vbios repo
for other types, but did not see any used. Hopefully this means there
aren't any in the wild that will now break.
For some reason max_vco was set to a lower value that it can support,
which prevented some clock states to be applied. Fix this by setting it
to the same value as downstream.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
On architectures for which access to GPU memory is non-coherent,
caches need to be flushed and invalidated explicitly when BO control
changes between CPU and GPU.
This patch adds buffer synchronization functions which invokes the
correct API (PCI or DMA) to ensure synchronization is effective.
Based on the TTM DMA cache helper patches by Lucas Stach.
Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
drm/nouveau: allocate GPFIFOs and fences coherently
Specify TTM_PL_FLAG_UNCACHED when allocating GPFIFOs and fences to
allow them to be safely accessed by the kernel without being synced
on non-coherent architectures.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Allow nouveau_bo_new() to recognize the TTM_PL_FLAG_UNCACHED flag, which
means that we want the allocated BO to be perfectly coherent between the
CPU and GPU. This is useful on non-coherent architectures for which we
do not want to manually sync some rarely-accessed buffers: typically,
fences and pushbuffers.
A TTM BO allocated with the TTM_PL_FLAG_UNCACHED on a non-coherent
architecture will be populated using the DMA API, and accesses to it
performed using the coherent mapping performed by dma_alloc_coherent().
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Add a function allowing us to know whether a device is CPU-coherent,
i.e. accesses performed by the CPU on GPU-mapped buffers will
be immediately visible on the GPU side and vice-versa.
For now, a device is considered to be coherent if it uses the PCI bus on
a non-ARM architecture.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Pinned BOs are supposed to remain in their current location until
unpinned. Display a warning for the supposedly-erroneous case where we
are trying to move such objects.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 28 Aug 2014 03:00:30 +0000 (13:00 +1000)]
drm/gm204/disp: some magic that fixes bringup of uninitialised outputs
Probably missing something here, doesn't make a lot of sense to write
or+link data into a register whose offset is calculated by the same
or+link info..
This is the all I've witnessed the binary driver and vbios doing so
far, so it'll do.
Ben Skeggs [Thu, 28 Aug 2014 01:52:12 +0000 (11:52 +1000)]
drm/gf110-/disp: magic that might help some tmds issues
The binary driver has been doing this since GF119, and we've somehow
gotten away with it. But, TMDS that hasn't been initialised already
by the x86 vbios code is distorted without it on GM204.
Ben Skeggs [Thu, 21 Aug 2014 00:39:01 +0000 (10:39 +1000)]
drm/nouveau/bios: log if auxch accesses fail, also return 0x00 from rd when it does
Logging at trace level, rather than as en error, as it seems conceivable
that failure could be normal under certain circumstances (new bios,
older sink that doesn't support a particular DPCD address)
Ben Skeggs [Wed, 17 Sep 2014 23:24:10 +0000 (09:24 +1000)]
drm/nouveau/bios: split out shadow methods
We're about to need to be able to fetch additional chunks of data beyond
the primary bios image, which makes fetching a lot more complicated.
This splits out the verious shadowing routines to be nothing more than
very dumb "fetch this much data from this offset" routines, and leaves
the logic of what and how much to fetch in common code.
Vince Hsu [Tue, 2 Dec 2014 04:50:32 +0000 (12:50 +0800)]
soc/tegra: fuse: export tegra_sku_info
Some Tegra drivers might be compiled as kernel modules, and they need the
fuse information for initialization. One example is the GK20A Nouveau
driver. It needs the GPU speedo value to calculate frequency-voltage
table. So export the tegra_sku_info.
Laurent Pinchart [Thu, 27 Nov 2014 15:19:13 +0000 (17:19 +0200)]
ARM: shmobile: marzen: Remove DU platform device
Platform data support has been removed from the DU driver, drop DU
support from the legacy Marzen board file. The multiplatform DT-based
Marzen support should be used instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Dave Airlie <airlied@redhat.com>
Laurent Pinchart [Thu, 27 Nov 2014 15:19:12 +0000 (17:19 +0200)]
ARM: shmobile: lager: Remove DU platform device
Platform data support has been removed from the DU driver, drop DU
support from the legacy Lager board file. The multiplatform DT-based
Lager support should be used instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Wed, 26 Nov 2014 22:36:19 +0000 (08:36 +1000)]
Merge branch 'drm/du/adv7511' of git://linuxtv.org/pinchartl/fbdev into drm-next
The branch is based on a merge of drm-next and Simon's tags/renesas-dt-du-for-
v3.19 available at
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git, the latter
having been pulled in the ARM SoC tree for v3.19.
Compared to v1, I've rebased my branch on a later drm-next, added Julia's
error return code fix, and documented the "drm: Decouple EDID parsing from I2C
adapter" patch properly.
v1:
Here's a pull request that adds HDMI support to the R-Car DU driver, including
a new slave encoder driver for the adv7511.
* 'drm/du/adv7511' of git://linuxtv.org/pinchartl/fbdev:
drm: Add adv7511 encoder driver
video: Add ADV751[13] DT bindings documentation
drm: Decouple EDID parsing from I2C adapter
drm: rcar-du: Add HDMI encoder and connector support
drm: rcar-du: Replace drm_encoder with drm_slave_encoder
drm: rcar-du: Replace direct DRM encoder access with cast macro
drm: rcar-du: Pass the encoder DT node to rcar_du_encoder_init()
drm: rcar-du: Remove platform data support
drm: rcar-du: fix error return code
ARM: shmobile: koelsch: Enable DU device in DT
ARM: shmobile: koelsch-reference: Remove DU platform device
ARM: shmobile: lager: Enable DU device in DT
ARM: shmobile: lager-reference: Remove DU platform device
ARM: shmobile: marzen: Enable DU device in DT
ARM: shmobile: dts: Add common file for AA104XD12 panel
ARM: shmobile: r8a7791: Add DU node to device tree
ARM: shmobile: r8a7790: Add DU node to device tree
ARM: shmobile: r8a7779: Add DU node to device tree
ARM: shmobile: Remove FSF address from copyright headers
Dave Airlie [Wed, 26 Nov 2014 22:28:22 +0000 (08:28 +1000)]
Merge branch 'amdkfd-next-3.19' of git://people.freedesktop.org/~gabbayo/linux into drm-next
- Fixes for sparse warnings
- Memory leak fixes
- Fix for deadlock between amdkfd and iommu
* 'amdkfd-next-3.19' of git://people.freedesktop.org/~gabbayo/linux:
amdkfd: delete some dead code
amdkfd: Fix memory leak of mqds on dqm fini
amdkfd: fix an error handling bug in pqm_create_queue()
amdkfd: fix some error handling in ioctl
amdkfd: Remove DRM_AMDGPU dependency from Kconfig
amdkfd: explicitely include io.h in kfd_doorbell.c
amdkfd: Clear ctx cb before suspend
amdkfd: Instead of using get function, use container_of
amdkfd: use schedule() in sync_with_hw
amdkfd: Fix memory leak on process deregistration
amdkfd: add __iomem attribute to doorbell_ptr
amdkfd: fence_wait_timeout() can be static
amdkfd: is_occupied() can be static
amdkfd: Fix sparse warnings in kfd_flat_memory.c
amdkfd: pqm_get_kernel_queue() can be static
amdkfd: test_kq() can be static
amdkfd: Fix sparse warnings in kfd_topology.c
amdkfd: Fix sparse warnings in kfd_chardev.c
This patch adds a driver for the Analog Devices adv7511. The adv7511 is
a standalone HDMI transmitter chip. It features a HDMI output interface
on one end and video and audio input interfaces on the other.
The ADV7511, ADV7511W and ADV7513 are HDMI audio and video transmitters
compatible with HDMI 1.4 and DVI 1.0. They're described in DT using the
OF graph bindings and a list of custom properties pertaining to the
input video bus configuration.
The drm_get_edid() function performs direct I2C accesses to read EDID
blocks, assuming that the monitor DDC interface is directly connected to
the I2C bus. It can't thus be used with HDMI encoders that control the
DDC bus and expose EDID blocks through a different interface.
Refactor drm_do_get_edid() to take a block read callback function
instead of an I2C adapter, and export it for direct use by drivers.
As in the general case the DDC bus is accessible by the kernel at the
I2C level, drivers must make all reasonable efforts to expose it as an
I2C adapter and use drm_get_edid() instead of abusing this function.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Laurent Pinchart [Sun, 30 Mar 2014 23:52:01 +0000 (01:52 +0200)]
drm: rcar-du: Replace drm_encoder with drm_slave_encoder
DRM slave encoders require their associated struct drm_encoder instance
to be embedded in a struct drm_slave_encoder. This makes processing
encoders regardless of their types needlessly and painfully complex in
drivers that use a mix of slave encoders and custom encoders. Such a
driver will need to either create drm_slave_encoder instances that fake
their embedded encoder instance, or to turn all drm_encoder instances
into drm_slave_encoder instances.
Between the two evils, one must choose the lesser. Use drm_slave_encoder
everywhere.
Laurent Pinchart [Sun, 30 Mar 2014 23:50:16 +0000 (01:50 +0200)]
drm: rcar-du: Replace direct DRM encoder access with cast macro
Add a new macro to downcast an rcar_du_encoder pointer to a drm_encoder
pointer and use it. This prepares for the replacement of the
rcar_drm_encoder encoder field with a drm_slave_encoder.
Philipp Zabel [Mon, 24 Nov 2014 15:33:34 +0000 (16:33 +0100)]
drm: imx: Move imx-drm driver out of staging
The imx-drm driver was put into staging mostly for the following reasons,
all of which have been addressed or superseded:
- convert the irq driver to use linear irq domains
- work out the device tree bindings, this lead to the common of_graph
bindings being used
- factor out common helper functions, this mostly resulted in the
component framework and drm of_graph helpers.
Before adding new fixes, and certainly before adding new features,
move it into its proper place below drivers/gpu/drm.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 25 Nov 2014 23:19:36 +0000 (09:19 +1000)]
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Add Exynos4415 SoC support, some fixups and cleanups.
Summary:
- Resolve kernel lockup issue incurred by probe request in probe context.
. For this, it moves all register codes of sub drivers into init function
and adds component binding support for vidi driver.
- Add Exynos4415 SoC support.
- Make each manager and display object to be embedded
in each driver context.
- Fix and clean up FIMD and MIPI-DSI drivers.
- Clean up unnecesary or wrong descriptions.
- And trivial cleanups.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (58 commits)
drm/exynos: avoid leak if exynos_dpi_probe() fails
drm/exynos: Fix exynos_dpi_remove() parameter
drm/exynos: vidi: add component support
drm/exynos: fix exynos_drm_component_del
drm/exynos/ipp: fix error return code
drm/exynos: clean up machine compatible string check
drm/exynos: move Exynos platform drivers registration to init
Revert "drm/exynos: fix null pointer dereference issue"
drm/exynos/dpi: stop using display->ctx pointer
drm/exynos/dpi: embed display into private context
drm/exynos/dp: stop using display->ctx pointer
drm/exynos/dp: embed display into private context
drm/exynos/vidi: stop using display->ctx pointer
drm/exynos/vidi: embed display into private context
drm/exynos/hdmi: stop using display->ctx pointer
drm/exynos/hdmi: embed display into private context
drm/exynos/fimd: stop using manager->ctx pointer
drm/exynos/fimd: embed manager into private context
drm/exynos/vidi: stop using manager->ctx pointer
drm/exynos/vidi: embed manager into private context
...
Dave Airlie [Tue, 25 Nov 2014 12:10:53 +0000 (22:10 +1000)]
Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next
Now that we have the bits needed for mdp5 atomic, here is the followup
pull request I mentioned. Main highlights are:
1) mdp5 multiple crtc and public plane support (no more hard-coded mixer setup!)
2) mdp5 atomic conversion
3) couple atomic helper fixes for issues found during mdp5 atomic
debug (reviewed by danvet.. but he didn't plane to send an
atomic-fixes pull request so I agreed to tack them on to mine)
* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
drm/atomic: shutdown *current* encoder
drm/atomic: check mode_changed *after* atomic_check
drm/msm/mdp4: fix mixer setup for multi-crtc + planes
drm/msm/mdp5: dpms(OFF) cleanups
drm/msm/mdp5: atomic
drm/msm: atomic fixes
drm/msm/mdp5: remove global mdp5_ctl_mgr
drm/msm/mdp5: don't use void * for opaque types
drm/msm: add multiple CRTC and overlay support
drm/msm/mdp5: set rate before enabling clk
drm/msm/mdp5: introduce mdp5_cfg module
drm/msm/mdp5: make SMP module dynamically configurable
drm/msm/hdmi: remove useless kref
drm/msm/mdp5: get the core clock rate from MDP5 config
drm/msm/mdp5: use irqdomains
Gustavo Padovan [Mon, 24 Nov 2014 17:19:49 +0000 (15:19 -0200)]
drm/exynos: Fix exynos_dpi_remove() parameter
exynos_dpi_remove() should receive a exynos_drm_display but when
DRM_EXYNOS_DPI was disabled it was receiving a struct device resulting in
ia compiler warning.
Inki Dae [Mon, 24 Nov 2014 05:55:41 +0000 (14:55 +0900)]
drm/exynos: vidi: add component support
This patch adds component support for vidi driver.
vidi driver is a kms driver so it doesn't need to be registered
to exynos_drm_subdrv_list. For this, it changes for the component
framework to be used for vidi driver.
This patch fixes below error also,
# echo 1 > /sys/devices/platform/exynos-drm-vidi/connection
[ 55.618529] ------------[ cut here ]------------
[ 55.621960] WARNING: CPU: 0 PID: 1397 at drivers/gpu/drm/drm_irq.c:1203 exynos_drm_crtc_dpms+0x88/0x17c()
[ 55.631268] Modules linked in:
[ 55.634278] CPU: 0 PID: 1397 Comm: sh Not tainted 3.18.0-rc2-146253-g31449d7 #1154
[ 55.641885] [<c0014400>] (unwind_backtrace) from [<c0011570>] (show_stack+0x10/0x14)
[ 55.649597] [<c0011570>] (show_stack) from [<c04764f4>] (dump_stack+0x84/0xc4)
[ 55.656802] [<c04764f4>] (dump_stack) from [<c00218b8>] (warn_slowpath_common+0x6c/0x88)
[ 55.664866] [<c00218b8>] (warn_slowpath_common) from [<c0021970>] (warn_slowpath_null+0x1c/0x24)
[ 55.673632] [<c0021970>] (warn_slowpath_null) from [<c027a780>] (exynos_drm_crtc_dpms+0x88/0x17c)
[ 55.682482] [<c027a780>] (exynos_drm_crtc_dpms) from [<c027a910>] (exynos_drm_crtc_commit+0x14/0x44)
[ 55.691622] [<c027a910>] (exynos_drm_crtc_commit) from [<c025521c>] (drm_crtc_helper_set_mode+0x3d0/0x51c)
[ 55.701233] [<c025521c>] (drm_crtc_helper_set_mode) from [<c0255d68>] (drm_crtc_helper_set_config+0x87c/0x9dc)
[ 55.711230] [<c0255d68>] (drm_crtc_helper_set_config) from [<c026afa8>] (drm_mode_set_config_internal+0x58/0xd4)
[ 55.721380] [<c026afa8>] (drm_mode_set_config_internal) from [<c025c208>] (restore_fbdev_mode+0xcc/0xec)
[ 55.730834] [<c025c208>] (restore_fbdev_mode) from [<c025c244>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x1c/0x30)
[ 55.741424] [<c025c244>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c025e0a8>] (drm_fb_helper_set_par+0x1c/0x60)
[ 55.752271] [<c025e0a8>] (drm_fb_helper_set_par) from [<c025e174>] (drm_fb_helper_hotplug_event+0x88/0xc4)
[ 55.761906] [<c025e174>] (drm_fb_helper_hotplug_event) from [<c02571c4>] (drm_helper_hpd_irq_event+0xc8/0x134)
[ 55.771898] [<c02571c4>] (drm_helper_hpd_irq_event) from [<c028e27c>] (vidi_store_connection+0x90/0xc8)
[ 55.781268] [<c028e27c>] (vidi_store_connection) from [<c0125f80>] (kernfs_fop_write+0xc0/0x180)
[ 55.790045] [<c0125f80>] (kernfs_fop_write) from [<c00cdf60>] (vfs_write+0xa0/0x1ac)
[ 55.797757] [<c00cdf60>] (vfs_write) from [<c00ce468>] (SyS_write+0x44/0x9c)
[ 55.804790] [<c00ce468>] (SyS_write) from [<c000e6a0>] (ret_fast_syscall+0x0/0x30)
[ 55.812328] ---[ end trace 3c0fe4386702d4dd ]---
This issue occurs when modeset to vidi is tried in case that drm_vblank_init
is called prior to crtc creation of vidi driver. In this case, crtc number
of vidi is invalid so any requests with the crtc number will fail.
This patch guarantees drm_vblank_init to be called after all kms drivers
are ready by using component framework.
Inki Dae [Mon, 24 Nov 2014 07:58:48 +0000 (16:58 +0900)]
drm/exynos: fix exynos_drm_component_del
This patch resolves the issue that component object isn't removed
correctly.
A given component object couldn't be placed to head of drm_component_list
so all component objects added to the drm_component_list should be checked
to remove the given component object.
Gustavo Padovan [Mon, 24 Nov 2014 07:37:26 +0000 (16:37 +0900)]
drm/exynos: move Exynos platform drivers registration to init
Registering the Exynos DRM subdevices platform drivers in the probe
function is causing an infinite loop. Fix this by moving it to the
exynos_drm_init() function to register the drivers on module init.
Registering drivers in the probe functions causes a deadlock in the parent
device lock. See Grant Likely explanation on the topic:
"I think the problem is that exynos_drm_init() is registering a normal
(non-OF) platform device, so the parent will be /sys/devices/platform.
It immediately gets bound against exynos_drm_platform_driver which
calls the exynos drm_platform_probe() hook. The driver core obtains
device_lock() on the device *and on the device parent*.
Inside the probe hook, additional platform_drivers get registered.
Each time one does, it tries to bind against every platform device in
the system, which includes the ones created by OF. When it attempts to
bind, it obtains device_lock() on the device *and on the device
parent*.
Before the change to move of-generated platform devices into
/sys/devices/platform, the devices had different parents. Now both
devices have /sys/devices/platform as the parent, so yes they are
going to deadlock.
The real problem is registering drivers from within a probe hook. That
is completely wrong for the above deadlock reason. __driver_attach()
will deadlock. Those registrations must be pulled out of .probe().
Registering devices in .probe() is okay because __device_attach()
doesn't try to obtain device_lock() on the parent."
INFO: task swapper/0:1 blocked for more than 120 seconds.
Not tainted 3.18.0-rc3-next-20141105 #794
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
swapper/0 D c052534c 0 1 0 0x00000000
[<c052534c>] (__schedule) from [<c0525b34>] (schedule_preempt_disabled+0x14/0x20)
[<c0525b34>] (schedule_preempt_disabled) from [<c0526d44>] (mutex_lock_nested+0x1c4/0x464
[<c0526d44>] (mutex_lock_nested) from [<c02be908>] (__driver_attach+0x48/0x98)
[<c02be908>] (__driver_attach) from [<c02bcc00>] (bus_for_each_dev+0x54/0x88)
[<c02bcc00>] (bus_for_each_dev) from [<c02bdce0>] (bus_add_driver+0xe4/0x200)
[<c02bdce0>] (bus_add_driver) from [<c02bef94>] (driver_register+0x78/0xf4)
[<c02bef94>] (driver_register) from [<c029e99c>] (exynos_drm_platform_probe+0x34/0x234)
[<c029e99c>] (exynos_drm_platform_probe) from [<c02bfcf0>] (platform_drv_probe+0x48/0xa4)
[<c02bfcf0>] (platform_drv_probe) from [<c02be680>] (driver_probe_device+0x13c/0x37c)
[<c02be680>] (driver_probe_device) from [<c02be954>] (__driver_attach+0x94/0x98)
[<c02be954>] (__driver_attach) from [<c02bcc00>] (bus_for_each_dev+0x54/0x88)
[<c02bcc00>] (bus_for_each_dev) from [<c02bdce0>] (bus_add_driver+0xe4/0x200)
[<c02bdce0>] (bus_add_driver) from [<c02bef94>] (driver_register+0x78/0xf4)
[<c02bef94>] (driver_register) from [<c029e938>] (exynos_drm_init+0x70/0xa0)
[<c029e938>] (exynos_drm_init) from [<c00089b0>] (do_one_initcall+0xac/0x1f0)
[<c00089b0>] (do_one_initcall) from [<c074bd90>] (kernel_init_freeable+0x10c/0x1d8)
[<c074bd90>] (kernel_init_freeable) from [<c051eabc>] (kernel_init+0x8/0xec)
[<c051eabc>] (kernel_init) from [<c000f268>] (ret_from_fork+0x14/0x2c)
3 locks held by swapper/0/1:
#0: (&dev->mutex){......}, at: [<c02be908>] __driver_attach+0x48/0x98
#1: (&dev->mutex){......}, at: [<c02be918>] __driver_attach+0x58/0x98
#2: (&dev->mutex){......}, at: [<c02be908>] __driver_attach+0x48/0x98
Changelog v2:
- call platform_driver_register after all kms and non kms drivers are
registered
- rebased it to exynos-drm-next
Moving subdriver probe to exynos_drm_platform_probe() was making
exynos_drm_device_subdrv_probe() fail because the platform data wasn't set
yet. It only gets set in exynos_drm_load.
projects / linux-beck.git / log