]>
git.karo-electronics.de Git - karo-tx-linux.git/log
Jonathan Cameron [Thu, 7 Oct 2010 12:10:19 +0000 (13:10 +0100)]
staging: iio: timestamp_en naming typo fix.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Hennerich [Wed, 6 Oct 2010 15:49:02 +0000 (17:49 +0200)]
staging: iio: adc: max1363: remove unused variable
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Hennerich [Thu, 7 Oct 2010 11:27:37 +0000 (13:27 +0200)]
staging: iio: iio_ring_rip_outer return immediately if rip_lots returns <= 0
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pavan Savoy [Wed, 6 Oct 2010 16:18:15 +0000 (12:18 -0400)]
misc: ti-st: Kconfig & Makefile for TI_ST
Add the Kconfig and the Makefile for the TI_ST driver.
TI_ST driver is the line discipline driver for the Texas Instrument's
WiLink chipsets.
Also add the ti-st folder to list of drivers under drivers/misc.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pavan Savoy [Wed, 6 Oct 2010 16:18:14 +0000 (12:18 -0400)]
staging: ti-st: move TI_ST from staging to misc/
move the 3 source files st_core.c, st_kim.c and st_ll.c
from staging to drivers/misc/.
Texas Instrument's WiLink 7 chipset packs wireless technologies like
Bluetooth, FM, GPS and WLAN into a single die.
Among these the Bluetooth, FM Rx/Tx and GPS are interfaced to a apps processor
over a single UART.
This line discipline driver allows various protocol drivers such as Bluetooth
BlueZ driver, FM V4L2 driver and GPS simple character device driver
to communicate with its relevant core in the chip.
Each protocol or technologies use a logical channel to communicate with chip.
Bluetooth uses the HCI-H4 [channels 1-4], FM uses a CH-8 and
GPS a CH-9 protocol. The driver also constitutes the TI HCI-LL Power
Management protocol which use channels 30-33.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Hennerich [Wed, 6 Oct 2010 08:25:49 +0000 (10:25 +0200)]
staging: iio: adc: ad799x: Address iio list feedback
Address feedback from Shubhrajyoti Datta:
Cast return value
Michael Hennerich:
Use i2c_smbus_read_byte_data()
Fix return value check
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Hennerich [Wed, 6 Oct 2010 14:15:37 +0000 (16:15 +0200)]
staging: iio: adc: max1363: prevent buffer overflow
ring->access.read_last() reads the entire datum from
the ring including padding and time stamp.
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Hennerich [Wed, 6 Oct 2010 14:22:17 +0000 (16:22 +0200)]
staging: iio: adc: ad799x: prevent buffer overflow
ring->access.read_last() reads the entire datum from the ring including padding and time stamp.
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jason Cooper [Wed, 6 Oct 2010 14:08:03 +0000 (10:08 -0400)]
staging: brcm80211: fix checkpatch macro errors.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jason Cooper [Wed, 6 Oct 2010 14:08:02 +0000 (10:08 -0400)]
staging: brcm80211: fix various checkpatch spacing errors.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jason Cooper [Wed, 6 Oct 2010 14:08:01 +0000 (10:08 -0400)]
staging: brcm80211: fix 'do not init statics to 0 or NULL'
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jason Cooper [Wed, 6 Oct 2010 14:08:00 +0000 (10:08 -0400)]
staging: brcm80211: fix 'do not init globals to 0 or NULL'
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jason Cooper [Wed, 6 Oct 2010 14:07:59 +0000 (10:07 -0400)]
staging: brcm80211: brcmfmac/*: fix remaining 'assignment in if condition'
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Wed, 6 Oct 2010 15:18:01 +0000 (08:18 -0700)]
Staging: the tree is now kept in git, not quilt
Update the MAINTAINERS file to show the new location of the staging
development tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Cross [Wed, 6 Oct 2010 01:50:26 +0000 (18:50 -0700)]
staging: west bridge, block driver change for partition support
This patch fixes an error in the block driver wherein multiple
partitions in an mmc card were not detected correctly due to
incorrect alloc_disk arguments.
Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Cross [Wed, 6 Oct 2010 01:48:08 +0000 (18:48 -0700)]
staging: west bridge, addition of common lock on cyasdevice
This patch adds and initializes a common lock to
cyasdevice module. This is meant to be used in order
to avoid error scenarios where the device module
could be called by both the block and gadget modules
at the same time.
Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
nohee ko [Wed, 6 Oct 2010 02:08:36 +0000 (19:08 -0700)]
staging: brcm80211: remove duplicated file, bcmwifi.c
Remove duplicated file, bcmwifi.c from brcmfmac.
bcmwifi.c under brcm80211/util/ will be shared
between softmac & fullmac drivers
Signed-off-by: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Cross [Wed, 6 Oct 2010 01:44:50 +0000 (18:44 -0700)]
staging: west bridge cyasgadget, removal of " " before ";"
This patch fixes removes all of the the " ;"'s in the west bridge
cyasgadget driver and instead replaces them with ";" only.
Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fernando Guzman Lugo [Wed, 6 Oct 2010 00:20:59 +0000 (19:20 -0500)]
staging: tidspbridge - update Kconfig to select IOMMU module
IOMMU module most be selected when using tidspbridge, because
now tidsbridge depends on iommu module.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
nohee ko [Wed, 6 Oct 2010 01:05:04 +0000 (18:05 -0700)]
staging: brcm80211: bug fix for n_ssids usage and update drv_info
-update drv_info so it's visible in "ethtool -i" output
-remove n_ssids usage. Fixes nullptr deref bug seen before.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Acked-by: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brett Rudley [Tue, 5 Oct 2010 23:49:47 +0000 (16:49 -0700)]
staging: brcm80211: bcmutils.[ch]: purge unused funcs
Get rid of unused functions in bcmutils.[ch]. Note that bcmutils.h is shared between
fullmac and softmac
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 23:24:17 +0000 (16:24 -0700)]
staging: autofs3: get the TODO file right the third time
This is what Arnd wanted the file to say.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fernando Guzman Lugo [Tue, 5 Oct 2010 20:35:44 +0000 (15:35 -0500)]
staging: tidspbridge - remove dmm custom module
Dmm custom module is not needed anymore.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fernando Guzman Lugo [Tue, 5 Oct 2010 20:35:43 +0000 (15:35 -0500)]
staging: tidspbridge - deprecate reserve/unreserve_memory funtions
Now what iommu memory usage is kept track by iommu module
the functions reserve/unreserve_memory are not needed anymore.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fernando Guzman Lugo [Tue, 5 Oct 2010 20:35:42 +0000 (15:35 -0500)]
staging: tidspbridge - remove reserved memory clean up
Now iommv module keeps track of iommu memory used,
we do not need resource cleanup for reserved
memories anymore.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fernando Guzman Lugo [Tue, 5 Oct 2010 20:35:41 +0000 (15:35 -0500)]
staging: tidspbridge: remove dw_dmmu_base from cfg_hostres struct
We don't need to map iva2 iommu register base address
anymore.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fernando Guzman Lugo [Tue, 5 Oct 2010 20:35:40 +0000 (15:35 -0500)]
staging: tidspbridge - move all iommu related code to a new file
Create dsp-mmu module and moves all the iommu code related to
this module.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fernando Guzman Lugo [Tue, 5 Oct 2010 20:35:39 +0000 (15:35 -0500)]
staging: tidspbridge - remove hw directory
hw directory was only being used for custom iommu implementation
APIs, so after the iommu module migration this directory is not
needed anymore.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fernando Guzman Lugo [Tue, 5 Oct 2010 20:35:38 +0000 (15:35 -0500)]
staging: tidspbridge - fix mmufault support
With changes for iommu migration mmufault report and dsp track
dump is broken, this patch fixes that.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fernando Guzman Lugo [Tue, 5 Oct 2010 20:35:37 +0000 (15:35 -0500)]
staging: tidspbridge - remove custom mmu code from tiomap3430.c
This patch removes all the custom mmu code remaining in
tiomap3430.c which is not needed anymore.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fernando Guzman Lugo [Tue, 5 Oct 2010 20:35:36 +0000 (15:35 -0500)]
staging: tidspbridge - rename bridge_brd_mem_map/unmap to a proper name
Now these functions only map user space addresses to dsp virtual
addresses, so now the functions have a more meaningful name.
Also now user_to_dsp_map returns the mapped address.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fernando Guzman Lugo [Tue, 5 Oct 2010 20:35:35 +0000 (15:35 -0500)]
staging: tidspbridge - move shared memory iommu maps to tiomap3430.c
Now iommu maps of shared memory segments are done in
bridge_brd_start and unmaped in bridge_brd_stop.
Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vinod Koul [Tue, 5 Oct 2010 15:25:17 +0000 (16:25 +0100)]
Staging: sst: Intel SST audio driver
This is the Intel SST audio driver.
As compared to the previous versions it has all the printks and other stuff
noted cleaned up and more hardware support. The Aava support is disabled in
this patch (is_aava resolves to 0) because the Aava board detection logic
is not yet upstream.
The driver itself is a combination of a traditional ALSA driver and a
hardware assisted offload driver which can play audio while the processor
is asleep but which can't do all the more interactive stuff.
In the general case most software would use the ALSA interface, but the
other interface is needed for certain classes of use such as music playback
on highly power consumption sensitive devices.
This is going to staging primarily because it depends upon the staging memrar
driver.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Harsha Priya <priya.harsha@intel.com>
[Merged together and tweaked for -next]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 19:08:48 +0000 (12:08 -0700)]
Staging: olpc_dcon: mark the driver as CONFIG_BROKEN for now
It doesn't build yet, as it depends on some changes that are not yet
in the tree, so mark it as BROKEN for now until that gets resolved.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Mon, 4 Oct 2010 16:09:15 +0000 (19:09 +0300)]
staging: tidspbridge: use omap_dsp_platform_data
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Mon, 4 Oct 2010 16:09:14 +0000 (19:09 +0300)]
omap: add dsp platform device
Otherwise tidspbridge cannot work.
It looks like this was dropped in the conversion to staging. I took the
liberty of doing some cleaning up.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Sat, 2 Oct 2010 16:38:02 +0000 (12:38 -0400)]
Staging: rtl8192u: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Sat, 2 Oct 2010 16:37:56 +0000 (12:37 -0400)]
Staging: rt2860: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Sat, 2 Oct 2010 16:38:05 +0000 (12:38 -0400)]
Staging: usbip: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Sat, 2 Oct 2010 16:37:54 +0000 (12:37 -0400)]
Staging: dream: qdsp5: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Sat, 2 Oct 2010 16:37:55 +0000 (12:37 -0400)]
Staging: easycap: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Sat, 2 Oct 2010 16:37:57 +0000 (12:37 -0400)]
Staging: rt2870: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Sat, 2 Oct 2010 16:37:52 +0000 (12:37 -0400)]
Staging: dream: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Sat, 2 Oct 2010 16:37:53 +0000 (12:37 -0400)]
Staging: dream: camera: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Sat, 2 Oct 2010 16:37:51 +0000 (12:37 -0400)]
Staging: cxt1e1: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Sat, 2 Oct 2010 16:37:58 +0000 (12:37 -0400)]
Staging: rtl8187se: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Sat, 2 Oct 2010 16:38:04 +0000 (12:38 -0400)]
Staging: tm6000: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Sat, 2 Oct 2010 16:37:59 +0000 (12:37 -0400)]
Staging: rtl8192e: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Sat, 2 Oct 2010 16:38:03 +0000 (12:38 -0400)]
Staging: rtl8192u: ieee80211: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Sat, 2 Oct 2010 16:38:09 +0000 (12:38 -0400)]
Staging: wlags49_h25: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Sat, 2 Oct 2010 16:38:07 +0000 (12:38 -0400)]
Staging: vt6656: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Sat, 2 Oct 2010 16:38:06 +0000 (12:38 -0400)]
Staging: vt6655: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Sat, 2 Oct 2010 16:38:08 +0000 (12:38 -0400)]
Staging: wlags49_h2: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tracey Dent [Sat, 2 Oct 2010 16:37:50 +0000 (12:37 -0400)]
Staging: cx25821: Makefile: cleaned up Makefile cflag lines
Changed to use the proper ccflags-y option
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Hennerich [Fri, 1 Oct 2010 14:41:52 +0000 (16:41 +0200)]
staging: iio: adc: Address mailing list feedback by Jonathan Cameron
Add missing new line
Fix typo
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Michael Hennerich [Fri, 1 Oct 2010 14:41:51 +0000 (16:41 +0200)]
staging: iio: adc: Enable driver support for ad799x AD converters
Driver for ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997 and
ad7998 multichannel ADC.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pavan Savoy [Thu, 30 Sep 2010 20:13:30 +0000 (16:13 -0400)]
staging: ti-st: mv ti_wilink_st header
Move the header to a standard linux device driver location.
This should pave the way for other drivers to be moved into the relevant
directories.
ti_wilink_st.h is a common header file used by the TI's shared transport device
driver for WiLink chipsets. Each individual protocol drivers like bluetooth
driver, FM V4L2 driver and GPS drivers will make use of this header.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pavan Savoy [Thu, 30 Sep 2010 20:13:29 +0000 (16:13 -0400)]
staging: ti-st: drop the __KERNEL__
ti_wilink_st.h had the line discipline number which the user-space
daemon refers to, to install and un-install the line discipline upon
request from the shared transport driver via rfkill device.
On moving this line discipline number to standard location of tty.h
drop the __KERNEL__ flag in the header, since the header file would
no longer be used by user-space.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pavan Savoy [Thu, 30 Sep 2010 20:13:28 +0000 (16:13 -0400)]
tty.h: new ldisc for TI WiLink ST
Texas Instrument's WiLink7 connectivity devices pack wireless connectivity
technologies like Bluetooth, FM Radio Receiver and Transmitter, GPS and WLAN
into a single die.
The BT, FM and GPS core on the chip are interfaced to application
processors via a single UART.
This line discipline driver allows such different technologies to be used
simultaneous and independent of each other.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Anton Blanchard [Fri, 1 Oct 2010 21:19:55 +0000 (14:19 -0700)]
Staging: zram: work around oops due to startup ordering snafu
I'm getting an oops when running mkfs on zram:
NIP [
d0000000030e0340 ] .zram_inc_stat+0x58/0x84 [zram]
[
c00000006d58f720 ] [
d0000000030e091c ] .zram_make_request+0xa8/0x6a0 [zram]
[
c00000006d58f840 ] [
c00000000035795c ] .generic_make_request+0x390/0x434
[
c00000006d58f950 ] [
c000000000357b14 ] .submit_bio+0x114/0x140
[
c00000006d58fa20 ] [
c000000000361778 ] .blkdev_issue_discard+0x1ac/0x250
[
c00000006d58fb10 ] [
c000000000361f68 ] .blkdev_ioctl+0x358/0x7fc
[
c00000006d58fbd0 ] [
c0000000001c1c1c ] .block_ioctl+0x6c/0x90
[
c00000006d58fc70 ] [
c0000000001984c4 ] .do_vfs_ioctl+0x660/0x6d4
[
c00000006d58fd70 ] [
c0000000001985a0 ] .SyS_ioctl+0x68/0xb0
Since disksize no longer starts as 0 it looks like we can call
zram_make_request before the device has been initialised. The patch below
fixes the immediate problem but this would go away if we move the
initialisation function elsewhere (as suggested in another thread).
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nicolas Kaiser [Mon, 4 Oct 2010 12:10:45 +0000 (14:10 +0200)]
staging: spectra: remove duplicated includes
Remove duplicated includes.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nicolas Kaiser [Mon, 4 Oct 2010 12:08:12 +0000 (14:08 +0200)]
staging: lirc: remove duplicated include
Remove duplicated include.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nicolas Kaiser [Mon, 4 Oct 2010 12:12:39 +0000 (14:12 +0200)]
staging: tidspbridge: remove duplicated include
Remove duplicated include.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasiliy Kulikov [Sun, 3 Oct 2010 17:22:48 +0000 (21:22 +0400)]
staging: ft1000: fix kernel info leak to userland for statistics
get_stat_data is not fully initialized before copy_to_user() call,
e.g. LedStat is not always set.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasiliy Kulikov [Sun, 3 Oct 2010 17:58:46 +0000 (21:58 +0400)]
staging: ft1000: fix error path
init_ft1000_netdev() calls kfree(netdev) instead of free_netdev(netdev).
It doesn't check kmalloc() return value.
ft1000_read_fifo_reg() doesn't free dr on error and calls kfree(urb)
instead of usb_free_urb(urb). Also kfree(NULL) is OK.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Maurice Dawson [Thu, 30 Sep 2010 18:55:18 +0000 (19:55 +0100)]
staging: comedi: file: Removed whitespaces before quoted newlines
Unnecessary whitespaces before quoted newlines
Signed-off-by: Maurice Dawson <mauricedawson2699@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Haiyang Zhang [Thu, 30 Sep 2010 17:52:13 +0000 (10:52 -0700)]
staging: hv: Remove camel case variables in channel.c
Rename camel case variables in channel.c and changed them to
lowercase.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 18:30:33 +0000 (11:30 -0700)]
Staging: autofs3: fix up TODO
As per Peter's request, move people to autofs4, don't fix up autofs3.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 18:28:57 +0000 (11:28 -0700)]
Staging: brcm80211: bcmdefs.h: remove unused #defines
There were a number of unused and unneeded defines in here, remove them.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 18:20:34 +0000 (11:20 -0700)]
Staging: brcm80211: remove STATIC definition
Use 'static', it's the correct thing to do.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 18:18:31 +0000 (11:18 -0700)]
Staging: brcm80211: remove CONST definition
Use 'const', it's the correct thing to do.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 18:15:47 +0000 (11:15 -0700)]
Staging: brcm80211: s/ulong/unsigned long/
This changes the usage everywhere in the driver, and removes
the definition as it should no longer be used anywhere.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 18:11:46 +0000 (11:11 -0700)]
Staging: brcm80211: s/ushort/unsigned short/
This changes the usage everywhere in the driver, and removes
the definition as it should no longer be used anywhere.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 18:09:48 +0000 (11:09 -0700)]
Staging: brcm80211: s/uchar/unsigned char/
This changes the usage everywhere in the driver, and removes
the definition as it should no longer be used anywhere.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 18:04:17 +0000 (11:04 -0700)]
Staging: brcm80211: s/int8/s8/
This changes the usage everywhere in the driver, and removes
the definition as it should no longer be used anywhere.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 17:25:05 +0000 (10:25 -0700)]
Staging: brcm80211: typedefs.h: remove uint8 definition
It's no longer needed anywhere, so remove it.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 17:23:40 +0000 (10:23 -0700)]
Staging: brcm80211: include: s/uint8/u8/
Replace uint8 with u8, the correct kernel type to be using here.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 17:14:26 +0000 (10:14 -0700)]
Staging: brcm80211: phy: s/uint8/u8/
Replace uint8 with u8, the correct kernel type to be using here.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 17:11:12 +0000 (10:11 -0700)]
Staging: brcm80211: brcmfmac: s/uint8/u8/
Replace uint8 with u8, the correct kernel type to be using here.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 17:09:00 +0000 (10:09 -0700)]
Staging: brcm80211: sys: s/uint8/u8/
Replace uint8 with u8, the correct kernel type to be using here.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 17:02:49 +0000 (10:02 -0700)]
Staging: brcm80211: util: s/uint8/u8/
Replace uint8 with u8, the correct kernel type to be using here.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 16:58:02 +0000 (09:58 -0700)]
Staging: brcm80211: typedefs.h: remove NULL definition
No need for a driver to define NULL, the core kernel handles that.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 16:56:50 +0000 (09:56 -0700)]
Staging: brcm80211: remove unit64 and int64 typedefs
They are not used anywhere, nor should they be defined.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 16:53:41 +0000 (09:53 -0700)]
Staging: brcm80211: typedefs.h move types.h to the top of the file
Include other files from the top, it's easier to unwind the logic that
way.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 16:51:42 +0000 (09:51 -0700)]
Staging: brcm80211: typedefs.h: remove version.h inclusion
It isn't needed anymore.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 16:50:20 +0000 (09:50 -0700)]
Staging: brcm80211: typedefs.h: remove some unused #if logic
We never care about __STRICT_ANSI__ from within the kernel, so remove
this logic.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 16:48:23 +0000 (09:48 -0700)]
Staging: brcm80211: remove bool redefinition
The core kernel type code handles this properly, no driver
should ever do it.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 16:43:56 +0000 (09:43 -0700)]
Staging: brcm80211: remove redefinition of size_t
No driver should ever do this.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 16:42:56 +0000 (09:42 -0700)]
Staging: brcm80211: remove PTRSZ definition
It was never used.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 16:41:45 +0000 (09:41 -0700)]
Staging: brcm80211: remove floating point typedefs
It's not ever used, so remove the typedef. Floating point isn't used
in the kernel, so this could never be an issue here.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 16:40:02 +0000 (09:40 -0700)]
Staging: brcm80211: remove INLINE definition
Use the "real" inline marking for functions.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 16:35:29 +0000 (09:35 -0700)]
Staging: brcm80211: remove UNUSED_PARAMETER macro
It's not needed anywhere.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 5 Oct 2010 16:31:19 +0000 (09:31 -0700)]
Staging: brcm80211: remove unneeded #ifdef checks
For a .h file, you never need to check it, the .h file does it
itself. For the typedef.h file, this is never needed.
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brett Rudley [Sun, 3 Oct 2010 01:08:53 +0000 (18:08 -0700)]
staging: brcm80211: Purge unused extern declarations
Purge unused extern declarations
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brett Rudley [Sun, 3 Oct 2010 01:08:52 +0000 (18:08 -0700)]
staging: brcm80211: Purge packets tags
No longer need packet tags
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brett Rudley [Sun, 3 Oct 2010 01:08:51 +0000 (18:08 -0700)]
staging: brcm80211: Purge unused flags and macros from wlc_scb.h
Purge unused flags and macros from wlc_scb.h
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brett Rudley [Sat, 2 Oct 2010 01:03:27 +0000 (18:03 -0700)]
staging: brcm80211: Purge unused #includes
Purging unused #includes.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brett Rudley [Sat, 2 Oct 2010 01:03:27 +0000 (18:03 -0700)]
staging: brcm80211: Move #includes out of header
Start the process of moving #includes out of headers and into individual C files.
For now, this patch addresses the softmac side of the driver, fullmac still to
be done.
Signed-off-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Henry Ptasinski [Fri, 1 Oct 2010 21:05:25 +0000 (14:05 -0700)]
staging: brcm80211: Remove unneeded definitions and structures.
Remove definitions and structures that are no longer needed. Most of the
remaining ones can probably be replaced with the equivalent ones from
include/linux/ieee80211.h.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Henry Ptasinski [Fri, 1 Oct 2010 21:05:24 +0000 (14:05 -0700)]
staging: brcm80211: Remove unnecessary assertions.
Remove assertions on the size of several structures. These structures are
never used anywhere.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>