The use of defined() on arrays and hashes has been deprecated since perl
5.6, but until 5.17.6 it only warned on lexicals, not package globals.
Signed-off-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jean Delvare [Thu, 13 Sep 2012 00:58:19 +0000 (10:58 +1000)]
drm/i915: optimize DIV_ROUND_CLOSEST() call
DIV_ROUND_CLOSEST is faster if the compiler knows it will only be dealing
with unsigned dividends.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pcmcia: move unbind/rebind into dev_pm_ops.complete
Move the device rebind procedures for cardbus devices from the pm.resume
into the pm.complete callback.
The reason for moving the code is: "[...] The PM code needs to send
suspend and resume messages to every device in the right order, and it
can't do that if new devices are being added at the same time. [...]"
However the situation really isn't quite that rigid. In particular,
adding new children during a resume callback shouldn't cause much of
problem because the children don't need to be resumed anyway (since they
were never suspended). On the other hand, if you do it you will get a
dev_warn() from the PM core, something like 'parent should not be
sleeping'.
Still, it is considered bad form and should be avoided if possible."
(Alan Stern's full comment about the topic can
be found here: <https://lkml.org/lkml/2012/7/10/254>)
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg KH <greg@kroah.com> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
drivers/dma/dmaengine.c: lower the priority of 'failed to get' dma channel message
Do the same as commit a03a202e9 ("dmaengine: failure to get a specific DMA
channel is not critical") to get rid of the following messages during
kernel boot:
dmaengine_get: failed to get dma1chan0: (-22)
dmaengine_get: failed to get dma1chan1: (-22)
dmaengine_get: failed to get dma1chan2: (-22)
dmaengine_get: failed to get dma1chan3: (-22)
dmaengine_get: failed to get dma1chan4: (-22)
dmaengine_get: failed to get dma1chan5: (-22)
dmaengine_get: failed to get dma1chan6: (-22)
dmaengine_get: failed to get dma1chan7: (-22)
dmaengine_get: failed to get dma1chan8: (-22)
dmaengine_get: failed to get dma1chan9: (-22)
dmaengine_get: failed to get dma1chan10: (-22)
dmaengine_get: failed to get dma1chan11: (-22)
dmaengine_get: failed to get dma1chan12: (-22)
dmaengine_get: failed to get dma1chan13: (-22)
dmaengine_get: failed to get dma1chan14: (-22)
dmaengine_get: failed to get dma1chan15: (-22)
dmaengine_get: failed to get dma1chan16: (-22)
dmaengine_get: failed to get dma1chan17: (-22)
dmaengine_get: failed to get dma1chan18: (-22)
dmaengine_get: failed to get dma1chan19: (-22)
dmaengine_get: failed to get dma1chan20: (-22)
dmaengine_get: failed to get dma1chan21: (-22)
dmaengine_get: failed to get dma1chan22: (-22)
dmaengine_get: failed to get dma1chan23: (-22)
dmaengine_get: failed to get dma1chan24: (-22)
dmaengine_get: failed to get dma1chan25: (-22)
dmaengine_get: failed to get dma1chan26: (-22)
dmaengine_get: failed to get dma1chan27: (-22)
dmaengine_get: failed to get dma1chan28: (-22)
dmaengine_get: failed to get dma1chan29: (-22)
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If we aren't debugging per_cpu maps, the cpu's node is stored in per_cpu
variable numa_node. If `node' is NUMA_NO_NODE, it means the caller wants
to clear the cpu's node. So we should also call set_cpu_numa_node() in
this case.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
arch/x86/platform/iris/iris.c: register a platform device and a platform driver
This makes the iris driver use the platform API, so it is properly exposed
in /sys.
[akpm@linux-foundation.org: remove commented-out code, add missing space to printk, clean up code layout] Signed-off-by: Shérab <Sebastien.Hinderer@ens-lyon.org> Cc: Len Brown <lenb@kernel.org> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
acpi_memhotplug.c: auto bind the memory device which is hotplugged before the driver is loaded
If the memory device is hotplugged before the driver is loaded, the user
cannot see this device under the directory /sys/bus/acpi/devices/, and the
user cannot bind it by hand after the driver is loaded. This patch
introduces a new feature to bind such device when the driver is being
loaded.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: Len Brown <lenb@kernel.org> Cc: "Brown, Len" <len.brown@intel.com> Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
acpi_memhotplug.c: bind the memory device when the driver is being loaded
We had introduced acpi_hotmem_initialized to avoid strange add_memory fail
message. But the memory device may not be used by the kernel, and the
device should be bound when the driver is being loaded. Remove
acpi_hotmem_initialized to allow that the device can be bound when the
driver is being loaded.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: Len Brown <lenb@kernel.org> Cc: "Brown, Len" <len.brown@intel.com> Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
acpi_memhotplug.c: free memory device if acpi_memory_enable_device() failed
If acpi_memory_enable_device() fails, acpi_memory_enable_device() will
return a non-zero value, which means we fail to bind the memory device to
this driver. So we should free memory device before
acpi_memory_device_add() returns.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: Len Brown <lenb@kernel.org> Cc: "Brown, Len" <len.brown@intel.com> Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
x86 cpu_hotplug: unmap cpu2node when the cpu is hotremoved
When a cpu is hotplugged, we call acpi_map_cpu2node() in
_acpi_map_lsapic() to store the cpu's node. But we don't clear the cpu's
node in acpi_unmap_lsapic() when this cpu is hotremoved. If the node is
also hotremoved, We will get the following messages:
The reason is that: the cpu's node is not NUMA_NO_NODE, we will call
alloc_pages_exact_node() to alloc memory on the node, but the node is
offlined.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
vfs: d_obtain_alias() needs to use "/" as default name.
NFS appears to use d_obtain_alias() to create the root dentry rather than
d_make_root. This can cause 'prepend_path()' to complain that the root
has a weird name if an NFS filesystem is lazily unmounted. e.g. if
"/mnt" is an NFS mount then
{ cd /mnt; umount -l /mnt ; ls -l /proc/self/cwd; }
will cause a WARN message like
WARNING: at /home/git/linux/fs/dcache.c:2624 prepend_path+0x1d7/0x1e0()
...
Root dentry has weird name <>
to appear in kernel logs.
So change d_obtain_alias() to use "/" rather than "" as the anonymous
name.
Signed-off-by: NeilBrown <neilb@suse.de> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch below does what Paul McKenney suggested in the previous thread.
Signed-off-by: Dave Jones <davej@redhat.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Paul Moore <paul@paul-moore.com> Cc: Eric Paris <eparis@parisplace.org> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The inb/outb macros for CRIS are broken from a number of points of view,
missing () around parameters and they have an unprotected if statement in
them. This was breaking the compile of IPMI on CRIS and thus I was being
annoyed by build regressions, so I fixed them.
Plus I don't think they would have worked at all, since the data values
were missing "&" and the outsl had a "3" instead of a "4" for the size.
From what I can tell, this stuff is not used at all, so this can't be any
more broken than it was before, anyway.
Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <starvik@axis.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / karo-tx-linux.git / log