Shirish S [Thu, 30 Aug 2012 07:04:06 +0000 (07:04 +0000)]
drm: edid: add support for E-DDC
The current logic for probing ddc is limited to
2 blocks (256 bytes), this patch adds support
for the 4 block (512) data.
To do this, a single 8-bit segment index is
passed to the display via the I2C address 30h.
Data from the selected segment is then immediately
read via the regular DDC2 address using a repeated
I2C 'START' signal.
Signed-off-by: Shirish S <s.shirish@samsung.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Ville Syrjälä [Thu, 16 Aug 2012 14:55:06 +0000 (14:55 +0000)]
drm: edid: Refactor HDMI VSDB detection
There are two slightly different pieces of code for HDMI VSDB
detection. Unify the code into a single helper function.
Also fix a bug where drm_detect_hdmi_monitor() would stop looking
for the HDMI VSDB after the first vendor specific block is found,
whether or not that block happened to be the HDMI VSDB. The
standard allows for any number of vendor specific blocks to be
present.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Ville Syrjälä [Thu, 16 Aug 2012 14:55:05 +0000 (14:55 +0000)]
drm: edid: Add bounds checking to HDMI VSDB parsing
The length of HDMI VSDB must be at least 5 bytes. Other than the minimum,
nothing else about the length is specified. Check the length before
accessing any additional field beyond the minimum length.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Ville Syrjälä [Thu, 16 Aug 2012 14:55:04 +0000 (14:55 +0000)]
drm: edid: Add some bounds checking
Make sure drm_detect_hdmi_monitor() and drm_detect_monitor_audio() don't
access beyond the extension block.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
At the moment, there is an inconsistency in the way modes are named.
Modes with timings parsed from the EDID information will call
drm_mode_set_name(), which will name the mode using this form:
<horizontal-res>x<vertical-res><interlace-char>
eg, 1920x1080i for an interlaced mode, or 1920x1080 for a progressive
mode.
However, timings parsed using the tables in drm_edid_modes.h do not
have the 'i' suffix. You are left to deduce that they're interlaced
from xrandr's output by the lower vertical refresh frequencies.
This patch changes the interlaced mode names in drm_edid_modes.h to
follow the style set by drm_mode_set_name(), which makes it clear
in xrandr which modes are interlaced and which are not (as xrandr
groups the refresh rates on a line according to the name field.)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
David Herrmann [Tue, 11 Sep 2012 18:35:11 +0000 (18:35 +0000)]
drm: make buffer management work without DRM_MASTER
DRM users should be able to create/destroy/manage dumb- and frame-buffers
without DRM_MASTER. These ioctls do not affect modesetting so there is no
reason to protect them by drm-master. Particularly, destroying buffers
should always be possible as a client has only access to buffers that they
created. Hence, there is no reason to prevent a client from destroying the
buffers, considering a simple close() would destroy them, anyway.
Furthermore, a display-server currently cannot shutdown correctly if it
does not have DRM_MASTER. If some other display-server becomes active (or
the kernel console), then the background display-server is unable to
destroy its buffers.
Under special curcumstances (like monitor reconfiguration) this might even
happen during runtime.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Sedat Dilek [Fri, 24 Aug 2012 19:20:03 +0000 (21:20 +0200)]
drm: udl: usb: Fix recursive Kconfig dependency
In drivers/usb/Kconfig "config USB_ARCH_HAS_HCD" is within "if USB_SUPPORT"
statement.
In drivers/gpu/drm/Kconfig "config DRM_USB" depends on USB_ARCH_HAS_HCD
but selects USB_SUPPORT which leads to the error for udl Kconfig:
$ yes "" | make oldconfig
scripts/kconfig/conf --oldconfig Kconfig
drivers/gpu/drm/udl/Kconfig:1:error: recursive dependency detected!
drivers/gpu/drm/udl/Kconfig:1: symbol DRM_UDL depends on USB_ARCH_HAS_HCD
drivers/usb/Kconfig:76: symbol USB_ARCH_HAS_HCD depends on USB_SUPPORT
drivers/usb/Kconfig:58: symbol USB_SUPPORT is selected by DRM_USB
drivers/gpu/drm/Kconfig:22: symbol DRM_USB is selected by DRM_UDL
Fix this by changing from select to depends on USB_SUPPORT in
"config DRM_USB".
Dave Airlie [Mon, 3 Sep 2012 02:05:01 +0000 (12:05 +1000)]
Merge branch 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Daniel writes:
"New stuff for -next. Highlights:
- prep patches for the modeset rework. Note that one of those patches
touches the fb helper in the common drm code.
- hasw hdmi audio support (Wang Xingchao)
- improved instdone dumping for gen7 (Ben)
- unbound tracking and a few follow-up patches from Chris
- dma_buf->begin/end_cpu_access plus fix for drm/udl (Dave)
- improve mmio error reporting for hsw
- prep patch for WQ_NON_REENTRANT removal (Tejun Heo)
"
* 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel: (41 commits)
drm/i915: Remove __GFP_NO_KSWAPD
drm/i915: disable rc6 on ilk when vt-d is enabled
drm/i915: Avoid unbinding due to an interrupted pin_and_fence during execbuffer
drm/i915: Use new INSTDONE registers (Gen7+)
drm/i915: Add new INSTDONE registers
drm/i915: Extract reading INSTDONE
drm/i915: Use a non-blocking wait for set-to-domain ioctl
drm/i915: Juggle code order to ease flow of the next patch
drm/i915: Use cpu relocations if the object is in the GTT but not mappable
drm/i915: Extract general object init routine
drm/i915: Protect private gem objects from truncate (such as imported dmabuf)
drm/i915: Only pwrite through the GTT if there is space in the aperture
i915: use alloc_ordered_workqueue() instead of explicit UNBOUND w/ max_active = 1
drm/i915: Find unclaimed MMIO writes.
drm/i915: Add ERR_INT to gen7 error state
drm/i915: Cantiga+ cannot handle a hsync front porch of 0
drm/i915: fix reassignment of variable "intel_dp->DP"
drm/i915: Try harder to allocate an mmap_offset
drm/i915: Show pin count in debugfs
drm/i915: Show (count, size) of purgeable objects in i915_gem_objects
...
Sedat Dilek [Mon, 27 Aug 2012 12:02:37 +0000 (14:02 +0200)]
drm/i915: Remove __GFP_NO_KSWAPD
When I pulled-in today's drm-intel-next into linux-next (next-20120824)
I saw this build-breakage:
drivers/gpu/drm/i915/i915_gem.c: In function 'i915_gem_object_get_pages_gtt':
drivers/gpu/drm/i915/i915_gem.c:1778:40: error: '__GFP_NO_KSWAPD' undeclared (first use in this function)
drivers/gpu/drm/i915/i915_gem.c:1778:40: note: each undeclared identifier is reported only once for each function it appears in
This is caused by commit ba099ef165f8 ("mm: remove __GFP_NO_KSWAPD")
and commit b6beae2c2014 ("mm: remove __GFP_NO_KSWAPD fixes") in
linux-next (next-20120824).
Fix this by removing __GFP_NO_KSWAPD from drm/i915 driver.
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Sun, 26 Aug 2012 18:33:18 +0000 (20:33 +0200)]
drm/i915: disable rc6 on ilk when vt-d is enabled
It blows up. And hopefully this is the root-cause of the mysterious
rc6 related hang on ilk. For reference, the commit that enabled rc6 on
ilk again is:
Linus Torvalds [Sun, 26 Aug 2012 17:14:11 +0000 (10:14 -0700)]
Merge tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream
Pull LogFS bugfixes from Prasad Joshi:
- "logfs: query block device for number of pages to send with bio"
This BUG was found when LogFS was used on KVM. The patch fixes
the problem by asking for underlaying block device the number
of pages to send with each BIO.
- "logfs: maintain the ordering of meta-inode destruction"
LogFS maintains file system meta-data in special inodes. These
inodes are releated to each other, therefore they must be
destroyed in a proper order.
- "logfs: initialize the number of iovecs in bio"
LogFS used to panic when it was created on an encrypted LVM
volume. The patch fixes the problem by properly initializing
the BIO.
Plus a couple more:
- logfs: create a pagecache page if it is not present
- logfs: destroy the reserved inodes while unmounting
* tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream:
logfs: query block device for number of pages to send with bio
logfs: maintain the ordering of meta-inode destruction
logfs: create a pagecache page if it is not present
logfs: initialize the number of iovecs in bio
logfs: destroy the reserved inodes while unmounting
Linus Torvalds [Sun, 26 Aug 2012 00:33:33 +0000 (17:33 -0700)]
Merge tag 'fixes-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc fixes from Arnd Bergmann:
"Bug fixes for various ARM platforms. About half of these are for OMAP
and submitted before but did not make it into v3.6-rc2."
* tag 'fixes-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
ARM: ux500: don't select LEDS_GPIO for snowball
ARM: imx: build i.MX6 functions only when needed
ARM: imx: select CPU_FREQ_TABLE when needed
ARM: imx: fix ksz9021rn_phy_fixup
ARM: imx: build pm-imx5 code only when PM is enabled
ARM: omap: allow building omap44xx without SMP
ARM: dts: imx51-babbage: fix esdhc cd/wp properties
ARM: imx6: spin the cpu until hardware takes it down
ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled
ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500'
ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path
ARM: Kirkwood: fix Makefile.boot
ARM: Kirkwood: Fix iconnect leds
ARM: Orion: Set eth packet size csum offload limit
ARM: mv78xx0: fix win_cfg_base prototype
ARM: OMAP: dmtimers: Fix locking issue in omap_dm_timer_request*()
ARM: mmp: fix potential NULL dereference
ARM: OMAP4: Register the OPP table only for 4430 device
cpufreq: OMAP: Handle missing frequency table on SMP systems
ARM: OMAP4: sleep: Save the complete used register stack frame
...
Linus Torvalds [Sun, 26 Aug 2012 00:31:59 +0000 (17:31 -0700)]
Merge tag 'stable/for-linus-3.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull three xen bug-fixes from Konrad Rzeszutek Wilk:
- Revert the kexec fix which caused on non-kexec shutdowns a race.
- Reuse existing P2M leafs - instead of requiring to allocate a large
area of bootup virtual address estate.
- Fix a one-off error when adding PFNs for balloon pages.
* tag 'stable/for-linus-3.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/setup: Fix one-off error when adding for-balloon PFNs to the P2M.
xen/p2m: Reuse existing P2M leafs if they are filled with 1:1 PFNs or INVALID.
Revert "xen PVonHVM: move shared_info to MMIO before kexec"
Linus Torvalds [Sun, 26 Aug 2012 00:30:18 +0000 (17:30 -0700)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc fixes from Benjamin Herrenschmidt:
"I meant to sent that earlier but got swamped with other things, so
here are some powerpc fixes for 3.6. A few regression fixes and some
bug fixes that I deemed should still make it.
There's a FSL update from Kumar with a bunch of defconfig updates
along with a few embedded fixes.
I also reverted my g5_defconfig update that I merged earlier as it was
completely busted, not too sure what happened there, I'll do a new one
later."
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
Revert "powerpc: Update g5_defconfig"
powerpc/perf: Use pmc_overflow() to detect rolled back events
powerpc: Fix VMX in interrupt check in POWER7 copy loops
powerpc: POWER7 copy_to_user/copy_from_user patch applied twice
powerpc: Fix personality handling in ppc64_personality()
powerpc/dma-iommu: Fix IOMMU window check
powerpc: Remove unnecessary ifdefs
powerpc/kgdb: Restore current_thread_info properly
powerpc/kgdb: Bail out of KGDB when we've been triggered
powerpc/kgdb: Do not set kgdb_single_step on ppc
powerpc/mpic_msgr: Add missing includes
powerpc: Fix null pointer deref in perf hardware breakpoints
powerpc: Fixup whitespace in xmon
powerpc: Fix xmon dl command for new printk implementation
powerpc/fsl: fix "Failed to mount /dev: No such device" errors
powerpc/fsl: update defconfigs
booke/wdt: some ioctls do not return values properly
powerpc/p4080ds: dts - add usb controller version info and port0
powerpc/85xx: mpc85xx_defconfig - add VIA PATA support for MPC85xxCDS
powerpc/fsl-pci: Only scan PCI bus if configured as a host
Linus Torvalds [Sun, 26 Aug 2012 00:27:17 +0000 (17:27 -0700)]
Merge git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Marcelo Tosatti.
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86 emulator: use stack size attribute to mask rsp in stack ops
KVM: MMU: Fix mmu_shrink() so that it can free mmu pages as intended
ppc: e500_tlb memset clears nothing
KVM: PPC: Add cache flush on page map
KVM: PPC: Book3S HV: Fix incorrect branch in H_CEDE code
KVM: x86: update KVM_SAVE_MSRS_BEGIN to correct value
Linus Torvalds [Sat, 25 Aug 2012 18:47:06 +0000 (11:47 -0700)]
Merge tag 'for-linus-v3.6-rc4' of git://oss.sgi.com/xfs/xfs
Pull xfs bugfixes from Ben Myers:
- fix uninitialised variable in xfs_rtbuf_get()
- unlock the AGI buffer when looping in xfs_dialloc
- check for possible overflow in xfs_ioc_trim
* tag 'for-linus-v3.6-rc4' of git://oss.sgi.com/xfs/xfs:
xfs: check for possible overflow in xfs_ioc_trim
xfs: unlock the AGI buffer when looping in xfs_dialloc
xfs: fix uninitialised variable in xfs_rtbuf_get()
Linus Torvalds [Sat, 25 Aug 2012 18:45:04 +0000 (11:45 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Random fixes across the MIPS tree. The two hotspots are several bugs
in the module loader and the ath79 SOC support; also noteworthy is the
restructuring of the code to synchronize CPU timers across CPUs on
startup; the old code recently ceased to work due to unrelated
changes.
All except one of these patches have sat for a significant time in
linux-next for testing."
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: pci-ar724x: avoid data bus error due to a missing PCIe module
MIPS: Malta: Delete duplicate PCI fixup.
MIPS: ath79: don't hardcode the unavailability of the DSP ASE
MIPS: Synchronize MIPS count one CPU at a time
MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348.
MIPS: Module: Deal with malformed HI16/LO16 relocation sequences.
MIPS: Fix race condition in module relocation code.
MIPS: Fix memory leak in error path of HI16/LO16 relocation handling.
MIPS: MTX-1: Add udelay to mtx1_pci_idsel
MIPS: ath79: select HAVE_CLK
MIPS: ath79: Use correct IRQ number for the OHCI controller on AR7240
MIPS: ath79: Fix number of GPIO lines for AR724[12]
MIPS: Octeon: Fix broken interrupt controller code.
Linus Torvalds [Sat, 25 Aug 2012 18:43:41 +0000 (11:43 -0700)]
Merge branch 'for-3.6' of git://linux-nfs.org/~bfields/linux
Pull nfsd bugfixes from J. Bruce Fields:
"Particular thanks to Michael Tokarev, Malahal Naineni, and Jamie
Heilman for their testing and debugging help."
* 'for-3.6' of git://linux-nfs.org/~bfields/linux:
svcrpc: fix svc_xprt_enqueue/svc_recv busy-looping
svcrpc: sends on closed socket should stop immediately
svcrpc: fix BUG() in svc_tcp_clear_pages
nfsd4: fix security flavor of NFSv4.0 callback
Linus Torvalds [Sat, 25 Aug 2012 18:36:43 +0000 (11:36 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block-related fixes from Jens Axboe:
- Improvements to the buffered and direct write IO plugging from
Fengguang.
- Abstract out the mapping of a bio in a request, and use that to
provide a blk_bio_map_sg() helper. Useful for mapping just a bio
instead of a full request.
- Regression fix from Hugh, fixing up a patch that went into the
previous release cycle (and marked stable, too) attempting to prevent
a loop in __getblk_slow().
- Updates to discard requests, fixing up the sizing and how we align
them. Also a change to disallow merging of discard requests, since
that doesn't really work properly yet.
- A few drbd fixes.
- Documentation updates.
* 'for-linus' of git://git.kernel.dk/linux-block:
block: replace __getblk_slow misfix by grow_dev_page fix
drbd: Write all pages of the bitmap after an online resize
drbd: Finish requests that completed while IO was frozen
drbd: fix drbd wire compatibility for empty flushes
Documentation: update tunable options in block/cfq-iosched.txt
Documentation: update tunable options in block/cfq-iosched.txt
Documentation: update missing index files in block/00-INDEX
block: move down direct IO plugging
block: remove plugging at buffered write time
block: disable discard request merge temporarily
bio: Fix potential memory leak in bio_find_or_create_slab()
block: Don't use static to define "void *p" in show_partition_start()
block: Add blk_bio_map_sg() helper
block: Introduce __blk_segment_map_sg() helper
fs/block-dev.c:fix performance regression in O_DIRECT writes to md block devices
block: split discard into aligned requests
block: reorganize rounding of max_discard_sectors
Linus Torvalds [Sat, 25 Aug 2012 17:28:19 +0000 (10:28 -0700)]
Merge tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
Pull libata fixes from Jeff Garzik:
- libata-acpi regression fix
- additional or corrected drive quirks for ata_blacklist
- Kconfig text tweaking
- new PCI IDs
- pata_atiixp: quirk for MSI motherboard
- export ahci_dev_classify for an ahci_platform driver
* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: Add a space to " 2GB ATA Flash Disk" DMA blacklist entry
[libata] new quirk, lift bridge limits for Buffalo DriveStation Quattro
[libata] Kconfig: Elaborate that SFF is meant for legacy and PATA stuff
[libata] acpi: call ata_acpi_gtm during ata port init time
ata_piix: Add Device IDs for Intel Lynx Point-LP PCH
ahci: Add Device IDs for Intel Lynx Point-LP PCH
pata_atiixp: override cable detection on MSI E350DM-E33
ahci: un-staticize ahci_dev_classify
Chris Wilson [Fri, 24 Aug 2012 18:18:18 +0000 (19:18 +0100)]
drm/i915: Avoid unbinding due to an interrupted pin_and_fence during execbuffer
If we need to stall in order to complete the pin_and_fence operation
during execbuffer reservation, there is a high likelihood that the
operation will be interrupted by a signal (thanks X!). In order to
simplify the cleanup along that error path, the object was
unconditionally unbound and the error propagated. However, being
interrupted here is far more common than I would like and so we can
strive to avoid the extra work by eliminating the forced unbind.
v2: In discussion over the indecent colour of the new functions and
unwind path, we realised that we can use the new unreserve function to
clean up the code even further.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Wed, 22 Aug 2012 18:32:15 +0000 (11:32 -0700)]
drm/i915: Use new INSTDONE registers (Gen7+)
Using the extracted INSTDONE reading, and our new register definitions,
update our hangcheck detection and error collection to use it. This
primarily means changing == to memcmp, and changing = to memcpy.
Hopefully this will give more info on error dump, and provide more
accurate hangcheck detection (both are actually TBD).
Also, remove the reading of instdone1 from the ring error collection
function, and just crap everything in capture_error_state (that could be
split into a separate patch if it wasn't so trivial).
v2: Now assuming i915_get_extra_instdone does the memset we can clean up the
code a bit (Jani)
v3: use ARRAY_SIZE as requested earlier by Jani (didn't change sizeof)
Updated commit msg
Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 23 Aug 2012 22:18:09 +0000 (15:18 -0700)]
drm/i915: Extract reading INSTDONE
INSTDONE is used in many places, and it varies from generation to
generation. This provides a good reason for us to extract the logic to
read the relevant information.
The patch has no functional change. It's prep for some new stuff.
v2: move the memset inside of i915_get_extra_instdone (Jani)
v3,4: bugs caught by (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
perf_event_interrupt() records an event only when an overflow occurs. But
this check for overflow is a simple 'if (val < 0)'.
Because the events are rolled back, this check for overflow fails and the
event is not recorded. perf_event_interrupt() later uses pmc_overflow() to
detect the overflow and resets the counters and the events are lost completely.
To properly detect the overflow of rolled back events, use pmc_overflow()
even when recording events.
Jiri Kosina [Mon, 13 Aug 2012 03:18:28 +0000 (03:18 +0000)]
powerpc: Fix personality handling in ppc64_personality()
Directly comparing current->personality against PER_LINUX32 doesn't work
in cases when any of the personality flags stored in the top three bytes
are used.
Directly forcefully setting personality to PER_LINUX32 or PER_LINUX
discards any flags stored in the top three bytes
Use personality() macro to compare only PER_MASK bytes and make sure that
we are setting only the bits that should be set, instead of overwriting
the whole value.
Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Aaro Koskinen [Sat, 18 Aug 2012 07:34:15 +0000 (07:34 +0000)]
powerpc/dma-iommu: Fix IOMMU window check
Checking for device mask to cover the whole IOMMU table is too strict.
IOMMU allocators should handle mask constraint properly for each
allocation.
The patch enables to use old AirPort Extreme cards on PowerMacs with
more than 1GB of memory; without the patch the driver init fails with:
b43-pci-bridge 0001:01:01.0: Warning: IOMMU window too big for device mask
b43-pci-bridge 0001:01:01.0: mask: 0x3fffffff, table end: 0x80000000
b43-phy0 ERROR: The machine/kernel does not support the required 30-bit DMA mask
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
For powerpc BooKE and e200, singlestep is handled on the critical/dbg
exception stack. This causes current_thread_info() to fail for kgdb
internal, so previously We work around this issue by copying
the thread_info from the kernel stack before calling kgdb_handle_exception,
and copying it back afterwards.
But actually we don't do this properly. We should backup current_thread_info
then restore that when exit.
Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tiejun Chen [Wed, 22 Aug 2012 16:10:18 +0000 (16:10 +0000)]
powerpc/kgdb: Do not set kgdb_single_step on ppc
The kgdb_single_step flag has the possibility to indefinitely
hang the system on an SMP system.
The x86 arch have the same problem, and that problem was fixed by
commit 8097551d9ab9b9e3630(kgdb,x86: do not set kgdb_single_step
on x86). This patch does the same behaviors as x86's patch.
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Chris Wilson [Fri, 24 Aug 2012 08:35:09 +0000 (09:35 +0100)]
drm/i915: Use a non-blocking wait for set-to-domain ioctl
The principal use for set-to-domain is for userspace to serialise
operations with a particular buffer, for example to maintain coherency
with a CPU map or to ratelimit its rendering by waiting on all previous
operations before continuing. As such we tend to hold the struct_mutex
for long periods during the synchronisation and so cause contention
issues with other users of the graphics device, even for independent
operations as memory management. An example is the contention between
compiz and X which causes jitter in the display and a drop in peak
throughput.
The ultimate solution would be a set of fine grained locks and lockless
operations, but an intermediate step is to first attempt the
synchronisation for set-to-domain without holding the mutex. This
introduces a number of race conditions, so we limit it use to the ioctl
periphery where we have no dependent state and can safely complete with
a locked synchronisation afterwards.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 24 Aug 2012 08:35:08 +0000 (09:35 +0100)]
drm/i915: Juggle code order to ease flow of the next patch
Move the wait-for-rendering logic around in the file so that we can
group it together with the subsequent variations. The general goal is to
have the lower level routines clustered together and then the higher
level logic building upon those low level routines that came before.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Fri, 24 Aug 2012 06:42:44 +0000 (09:42 +0300)]
gma500: remove references to drm_display_info raw_edid field
Another reference to raw_edid field of struct drm_display_info was added in
gma500 while the whole field was being removed, causing build
failure. Remove the hopefully last references to raw_edid.
Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
Pull crypto fixes from Herbert Xu:
"This push fixes a build error on 32-bit archs in the hifn driver as
well as a potential deadlock in the caam driver."
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - fix possible deadlock condition
crypto: hifn_795x - fix 64bit division and undefined __divdi3 on 32bit archs
Linus Torvalds [Fri, 24 Aug 2012 04:56:22 +0000 (21:56 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF, ext3 & reiserfs fixes from Jan Kara:
"A couple of fixes (udf, reiserfs, ext3) that accumulated over my
vacation."
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: fix retun value on error path in udf_load_logicalvol
jbd: don't write superblock when unmounting an ro filesystem
reiserfs: fix deadlocks with quotas
quota: Move down dqptr_sem read after initializing default warn[] type at __dquot_alloc_space().
UDF: During mount free lvid_bh before rescanning with different blocksize
udf: fix udf_setsize() for file data in ICB
Linus Torvalds [Fri, 24 Aug 2012 04:50:40 +0000 (21:50 -0700)]
Merge tag 'upstream-3.6-rc3' of git://git.infradead.org/linux-ubifs
Pull UBIFS fixes from Artem Bityutskiy:
- Fix crash on error which prevents emulated power-cut testing.
- Fix log reply regression introduced in 3.6-rc1.
- Fix UBIFS complaints about too small debug buffer size which.
- Fix error message spelling, and remove incorrect commentary.
* tag 'upstream-3.6-rc3' of git://git.infradead.org/linux-ubifs:
UBIFS: fix error messages spelling
UBIFS: fix complaints about too small debug buffer size
UBIFS: fix replay regression
UBIFS: fix crash on error path
UBIFS: remove stale commentary
Linus Torvalds [Fri, 24 Aug 2012 04:47:54 +0000 (21:47 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"This tree contains assorted fixlets: an alternatives patching crash
fix, an irq migration/hotplug interaction fix, a fix for large AMD
microcode images and a comment fixlet."
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, microcode, AMD: Fix broken ucode patch size check
x86/alternatives: Fix p6 nops on non-modular kernels
x86/fixup_irq: Use cpu_online_mask instead of cpu_all_mask
x86/spinlocks: Fix comment in spinlock.h
Linus Torvalds [Fri, 24 Aug 2012 04:46:57 +0000 (21:46 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Mostly small fixes for the fallout of the timekeeping overhaul in 3.6
along with stable fixes to address an accumulation problem and missing
sanity checks for RTC readouts and user space provided values."
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Avoid making adjustments if we haven't accumulated anything
time: Avoid potential shift overflow with large shift values
time: Fix casting issue in timekeeping_forward_now
time: Ensure we normalize the timekeeper in tk_xtime_add
time: Improve sanity checking of timekeeping inputs
Chris Wilson [Thu, 23 Aug 2012 12:12:52 +0000 (13:12 +0100)]
drm/i915: Use cpu relocations if the object is in the GTT but not mappable
This prevents the case of unbinding the object in order to process the
relocations through the GTT and then rebinding it only to then proceed
to use cpu relocations as the object is now in the CPU write domain. By
choosing to use cpu relocations up front, we can therefore avoid the
rebind penalty.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Sat, 11 Aug 2012 14:41:04 +0000 (15:41 +0100)]
drm/i915: Only pwrite through the GTT if there is space in the aperture
Avoid stalling and waiting for the GPU by checking to see if there is
sufficient inactive space in the aperture for us to bind the buffer
prior to writing through the GTT. If there is inadequate space we will
have to stall waiting for the GPU, and incur overheads moving objects
about. Instead, only incur the clflush overhead on the target object by
writing through shmem.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Sachin Kamat [Wed, 1 Aug 2012 11:45:32 +0000 (17:15 +0530)]
drm: Add misssing static storage class specifier in drm_fb_helper.c file
Fixes the following sparse warning:
drivers/gpu/drm/drm_fb_helper.c:239:6: warning:
symbol 'drm_fb_helper_force_kernel_mode' was not declared. Should it be static?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
Sachin Kamat [Wed, 1 Aug 2012 11:45:31 +0000 (17:15 +0530)]
drm: Add missing static storage class specifier in drm_irq.c file
Fixes the following sparse warning:
drivers/gpu/drm/drm_irq.c:1239:6:
warning: symbol 'drm_handle_vblank_events' was not declared. Should it be static?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
Mark Brown [Tue, 7 Aug 2012 11:14:14 +0000 (11:14 +0000)]
drm/i2c/ch7006: Convert to dev_pm_ops
The I2C specific suspend and resume functions have been deprecated and
printing a warning on boot for over a year, dev_pm_ops should be used
instead so convert to that.
Also remove the suspend function since all it does is log.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
Sachin Kamat [Fri, 10 Aug 2012 05:30:25 +0000 (05:30 +0000)]
drm/usb: select USB_SUPPORT in Kconfig
DRM_USB selects USB. However, USB depends on USB_SUPPORT and USB_ARCH_HAS_HCD.
Thus, selecting USB_SUPPORT in Kconfig avoids the following warning
(detected when DisplayLink was selected using exynos4_defconfig):
Forest Bond [Mon, 13 Aug 2012 16:29:04 +0000 (16:29 +0000)]
gma500: psb_intel_crtc: Drop crtc_enable flag.
This is set when setting DPMS on and off, but it isn't checked anywhere,
so just remove it.
Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Forest Bond [Mon, 13 Aug 2012 16:27:09 +0000 (16:27 +0000)]
gma500: Fix comment mispelling in cdv_intel_limits definition.
Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Jani Nikula [Wed, 15 Aug 2012 09:32:39 +0000 (09:32 +0000)]
drm: remove the raw_edid field from struct drm_display_info
Neither the drm core nor any of the drivers really need the raw_edid field
of struct drm_display_info for anything. Instead of being useful, it
creates confusion about who is responsible for freeing the memory it points
to and setting the field to NULL afterwards, leading to memory leaks and
dangling pointers.
Remove the raw_edid field, and fix drivers as necessary.
Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alan Cox [Wed, 22 Aug 2012 12:00:28 +0000 (12:00 +0000)]
gma500/cdv: Fix call to cdv_intel_dp_set_m_n
We should be making this call not praying that the values are right.
In addition as noted by Josiah Standing we should be calling this
for eDP as well.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Zhao Yakui [Wed, 8 Aug 2012 13:57:01 +0000 (13:57 +0000)]
gma500: Disable the clock gating of display controller to make DP/eDP work well
I don't know why the DP/eDP is affected by the clock gating. But the test
shows that it really fixes the DP/eDP clock issue during enabling DP/eDP.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
[Updated to only apply the workaround if the device has DP. We don't want
to do this on netbooks] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Zhao Yakui [Wed, 8 Aug 2012 13:55:55 +0000 (13:55 +0000)]
gma500/cdv: Add eDP support
Introduce the eDP support into the driver.
This has been reworked a bit because kernel driver proper uses encoder/connectors
while the legacy Intel driver uses the old output stuff.
It also diverges on the backlight handling. The legacy Intel driver adds a panel
abstraction based upon the i915 one. It's only really used for backlight bits
and we have a perfectly good backlight abstraction which can extend instead.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
[ported to upstream driver, redid backlight abstraction] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Zhao Yakui [Wed, 8 Aug 2012 13:53:48 +0000 (13:53 +0000)]
gma500: Program the DPLL lane based on the selected digitial port
Based on the spec, the CRT output doesn't use the lane. And the HDMI B output
uses the Lane0/1 while the HDMI C output uses the Lane 2/3. But currently
it will program all the four lanes for the CRT/HDMI.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
[Ported to the in-kernel driver] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Zhao Yakui [Wed, 8 Aug 2012 13:53:15 +0000 (13:53 +0000)]
gma500: Fix incorrect SR issue when disabling CRTC already in disabled state
Currently when trying to call the DPMS off again for one CRTC with DPMS off,
it will firstly disable the SR and can't enable it again because of the
incorrect check/logic. In such case the self refresh is still disabled
although one CRTC pipe is active. This is wrong.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
[Ported to in kernel driver] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Tomas Racek [Tue, 14 Aug 2012 08:35:04 +0000 (10:35 +0200)]
xfs: check for possible overflow in xfs_ioc_trim
If range.start or range.minlen is bigger than filesystem size, return
invalid value error. This fixes possible overflow in BTOBB macro when
passed value was nearly ULLONG_MAX.
Signed-off-by: Tomas Racek <tracek@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
xfs: unlock the AGI buffer when looping in xfs_dialloc
Also update some commens in the area to make the code easier to read.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
Arnd Bergmann [Thu, 23 Aug 2012 15:30:54 +0000 (17:30 +0200)]
Merge branch 'randconfig/mach' into fixes
Small platform specific bug fixes for problems found in randconfig builds.
* randconfig/mach:
ARM: ux500: don't select LEDS_GPIO for snowball
ARM: imx: build i.MX6 functions only when needed
ARM: imx: select CPU_FREQ_TABLE when needed
ARM: imx: fix ksz9021rn_phy_fixup
ARM: imx: build pm-imx5 code only when PM is enabled
ARM: omap: allow building omap44xx without SMP
Arnd Bergmann [Wed, 15 Aug 2012 20:34:48 +0000 (20:34 +0000)]
ARM: ux500: don't select LEDS_GPIO for snowball
Using 'select' in Kconfig is hard, a platform cannot just
enable a driver without also making sure that its subsystem
is there. Also, there is no actual code dependency between
the platform and the gpio leds driver.
Without this patch, building without LEDS_CLASS esults in:
drivers/built-in.o: In function `create_gpio_led.part.2':
governor_userspace.c:(.devinit.text+0x5a58): undefined reference to `led_classdev_register'
drivers/built-in.o: In function `gpio_led_remove':
governor_userspace.c:(.devexit.text+0x6b8): undefined reference to `led_classdev_unregister'
This reverts 8733f53c6 "ARM: ux500: Kconfig: Compile in leds-gpio
support for Snowball" that introduced the regression and did not
provide a helpful explanation.
In order to leave the GPIO LED code still present in normal
builds, this also enables the symbol in u8500_defconfig, in addition
to the other LED drivers that are already selected there.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Lee Jones <lee.jones@linaro.org>
Arnd Bergmann [Fri, 17 Aug 2012 00:16:08 +0000 (00:16 +0000)]
ARM: imx: build i.MX6 functions only when needed
The head-v7.S contains a call to the generic cpu_suspend function,
which is only available when selected by the i.MX6 code. As
pointed out by Shawn Guo, i.MX5 does not actually use any
functions defined in head-v7.S. It is also needed only for
the i.MX6 power management code and for the SMP code, so
we can restrict building this file to situations in which
at least one of those two is present.
Finally, other platforms with a similar file call it headsmp.S,
so we can rename it to the same for consistency.
Without this patch, building imx5 standalone results in:
arch/arm/mach-imx/built-in.o: In function `v7_cpu_resume':
arch/arm/mach-imx/head-v7.S:104: undefined reference to `cpu_resume'
Arnd Bergmann [Thu, 16 Aug 2012 10:40:40 +0000 (10:40 +0000)]
ARM: imx: select CPU_FREQ_TABLE when needed
The i.MX cpufreq implementation uses the CPU_FREQ_TABLE helpers,
so it needs to select that code to be built. This problem has
apparently existed since the i.MX cpufreq code was first merged
in v2.6.37.
Building IMX without CPU_FREQ_TABLE results in:
arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_exit':
arch/arm/plat-mxc/cpufreq.c:173: undefined reference to `cpufreq_frequency_table_put_attr'
arch/arm/plat-mxc/built-in.o: In function `mxc_set_target':
arch/arm/plat-mxc/cpufreq.c:84: undefined reference to `cpufreq_frequency_table_target'
arch/arm/plat-mxc/built-in.o: In function `mxc_verify_speed':
arch/arm/plat-mxc/cpufreq.c:65: undefined reference to `cpufreq_frequency_table_verify'
arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_init':
arch/arm/plat-mxc/cpufreq.c:154: undefined reference to `cpufreq_frequency_table_cpuinfo'
arch/arm/plat-mxc/cpufreq.c:162: undefined reference to `cpufreq_frequency_table_get_attr'
Arnd Bergmann [Thu, 16 Aug 2012 07:42:50 +0000 (07:42 +0000)]
ARM: imx: fix ksz9021rn_phy_fixup
The ksz9021rn_phy_fixup and mx6q_sabrelite functions try to
set up an ethernet phy if they can. They do check whether
phylib is enabled, but unfortunately the functions can only
be called from platform code if phylib is builtin, not
if it is a module
Without this patch, building with a modular phylib results in:
arch/arm/mach-imx/mach-imx6q.c: In function 'imx6q_sabrelite_init':
arch/arm/mach-imx/mach-imx6q.c:120:5: error: 'ksz9021rn_phy_fixup' undeclared (first use in this function)
arch/arm/mach-imx/mach-imx6q.c:120:5: note: each undeclared identifier is reported only once for each function it appears in
The bug was originally reported by Artem Bityutskiy but only
partially fixed in ef441806 "ARM: imx6q: register phy fixup only when
CONFIG_PHYLIB is enabled".
projects / linux-beck.git / log