Olof Johansson [Fri, 3 Apr 2015 18:26:08 +0000 (11:26 -0700)]
Merge tag 'renesas-soc-cleanup3-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup
Merge "Third Round of Renesas ARM Based SoC Cleanup for v4.1" from Simon
Horman:
* Remove default cpuidle driver, it does not appear to serve any purpose
* tag 'renesas-soc-cleanup3-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: cpuidle: Remove the pointless default driver
Olof Johansson [Fri, 3 Apr 2015 17:52:29 +0000 (10:52 -0700)]
Merge tag 'renesas-pm-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup
Merge "Renesas ARM Based SoC PM Updates for v4.1" from Simon Horman:
* Consolidate the pm code for R-Car Gen2
* Correct SYSCIER value for r8a7790 and r8a7791 SoCs
* tag 'renesas-pm-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Consolidate the pm code for R-Car Gen2
ARM: shmobile: r8a7791: Correct SYSCIER value
ARM: shmobile: r8a7790: Correct SYSCIER value
Olof Johansson [Fri, 3 Apr 2015 17:51:02 +0000 (10:51 -0700)]
Merge tag 'v4.1-legacy' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup
Merge "omap legacy boot clean-up for v4.1" from Tony Lindgren:
Drop three omap3 legacy board-*.c files
We want to get omap3 moved over to device tree only based booting.
These three board-*.c files seem to be inactive, so let's attempt
to drop them now rather than later. With these dropped, we have
omap3 device tree conversion status in a known state. Then we know
that we have .dts support for the remaining omap3 board-*.c files,
or it's being worked on.
By dropping these files now, we can simply revert them if really
needed for the next few merge cycles if we run into suprises.
Reverting things later on will not be so easily done.
* tag 'v4.1-legacy' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Remove legacy support for omap3 TouchBook
ARM: OMAP3: Remove legacy support for devkit8000
ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board
Olof Johansson [Thu, 2 Apr 2015 00:56:33 +0000 (17:56 -0700)]
Merge tag 'davinci-for-v4.1/mcasp' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/cleanup
Merge "DaVinci McASP changes for v4.1" from Sekhar Nori:
This pull request contains cleanups and non-urgent fixes for DaVinci
McASP platform support code.
* tag 'davinci-for-v4.1/mcasp' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: dm646x: Add interrupt resource for McASPs
ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x
ARM: davinci: dm646x: Clean up the McASP DMA resources
ARM: davinci: devices-da8xx: Add support for McASP2 on da830
ARM: davinci: devices-da8xx: Clean up and correct the McASP device creation
ARM: davinci: devices-da8xx: Add interrupt resource to McASP structs
ARM: davinci: devices-da8xx: Add resource name for the McASP DMA request
Daniel Lezcano [Tue, 17 Mar 2015 15:25:12 +0000 (16:25 +0100)]
ARM: shmobile: cpuidle: Remove the pointless default driver
The default idle driver uses one state with the WFI instruction.
The default idle routine invokes WFI when no cpuidle driver is present.
The default cpuidle driver is pointless and does not give more than the
default idle routine and moreover it pulls all the mathematics tied with
the cpuidle governor for nothing, hence consuming more energy.
Remove the default driver, the related code and register the driver directly.
[compiled only - no board - no test]
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Peter Ujfalusi [Thu, 12 Mar 2015 08:06:30 +0000 (10:06 +0200)]
ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x
McASP1 TX interrupt is 30, not 32 on DM646x DMSoC.
While at it remove the bogus AEMIF interrupt entry from
dm646x_default_priorities[]. AEMIF interrupt on DM6467 is
60 not 30 and the entry for the correct interrupt number
is already present in the same table.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[nsekhar@ti.com: remove bogus entry from dm646x_default_priorities[]] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Tony Lindgren [Tue, 17 Mar 2015 00:07:26 +0000 (17:07 -0700)]
ARM: OMAP2+: Remove legacy support for omap3 TouchBook
We've been moving all omap2+ based systems to boot in device tree only
mode for a few years now. Only omap3 has legacy booting support
remaining. Most omap3 boards already have related arch/arm/boot/*.dts*
files for booting with device tree.
As it seems this board only has minimal support upstreamed for the
legacy booting and has not seen activity for on the mailing lists
for a few years, let's attempt to remove the related legacy board-*.c
file.
I do not have this board, but it seems getting the same level of
support with device tree based booting is mostly just configuring
the .dts file. And there is no need to upgrade the boot loader as
we can boot with appended DTB too. And most of the omap3 boards
seem to be related to omap3-evm, and omap3beagleboard that are
supported with device tree based booting.
If somebody is using this board actively with the mainline kernel,
please communicate this to the linux-omap mailing list so we can
get the board booting with device tree based support. I can help
some too getting the minimal device tree based booting going if
help is needed.
The reason for attempting to remove this board now is that I'd
rather get the remaining omap3 legacy booting support into a known
state where we at least have a .dts file being written for the
remaining legacy boards. That is because for the next few merge
cycles we can still revert this patch if absolutely necessary,
but I'd rather not get suprised by missing .dts files at the point
where we are ready to drop all remaining omap3 legacy booting
support later on.
Tony Lindgren [Mon, 16 Mar 2015 23:56:58 +0000 (16:56 -0700)]
ARM: OMAP3: Remove legacy support for devkit8000
We've been moving all omap2+ based systems to boot in device tree only
mode for a few years now. Only omap3 has legacy booting support
remaining. Most omap3 boards already have related arch/arm/boot/*.dts*
files for booting with device tree.
As it seems this board only has minimal support upstreamed for the
legacy booting and has not seen activity for on the mailing lists
for a few years, let's attempt to remove the related legacy board-*.c
file.
I do not have this board, but it seems getting the same level of
support with device tree based booting is mostly just configuring
the .dts file. And there is no need to upgrade the boot loader as
we can boot with appended DTB too. And most of the omap3 boards
seem to be related to omap3-evm, and omap3beagleboard that are
supported with device tree based booting.
If somebody is using this board actively with the mainline kernel,
please communicate this to the linux-omap mailing list so we can
get the board booting with device tree based support. I can help
some too getting the minimal device tree based booting going if
help is needed.
The reason for attempting to remove this board now is that I'd
rather get the remaining omap3 legacy booting support into a known
state where we at least have a .dts file being written for the
remaining legacy boards. That is because for the next few merge
cycles we can still revert this patch if absolutely necessary,
but I'd rather not get suprised by missing .dts files at the point
where we are ready to drop all remaining omap3 legacy booting
support later on.
Tony Lindgren [Mon, 16 Mar 2015 23:56:58 +0000 (16:56 -0700)]
ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board
We've been moving all omap2+ based systems to boot in device tree only
mode for a few years now. Only omap3 has legacy booting support
remaining. Most omap3 boards already have related arch/arm/boot/*.dts*
files for booting with device tree.
As it seems this board only has minimal support upstreamed for the
legacy booting and has not seen activity for on the mailing lists
for a few years, let's attempt to remove the related legacy board-*.c
file.
I do not have this board, but it seems getting the same level of
support with device tree based booting is mostly just configuring
the .dts file. And there is no need to upgrade the boot loader as
we can boot with appended DTB too. And most of the omap3 boards
seem to be related to omap3-evm, and omap3beagleboard that are
supported with device tree based booting.
If somebody is using this board actively with the mainline kernel,
please communicate this to the linux-omap mailing list so we can
get the board booting with device tree based support. I can help
some too getting the minimal device tree based booting going if
help is needed.
The reason for attempting to remove this board now is that I'd
rather get the remaining omap3 legacy booting support into a known
state where we at least have a .dts file being written for the
remaining legacy boards. That is because for the next few merge
cycles we can still revert this patch if absolutely necessary,
but I'd rather not get suprised by missing .dts files at the point
where we are ready to drop all remaining omap3 legacy booting
support later on.
Also looks like this board is no longer listed on ema-tech.com
product page at:
http://ema-tech.com/en/categories.html
Cc: Jason Lam <lzg@ema-tech.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Gaku Inami [Mon, 16 Mar 2015 05:48:43 +0000 (14:48 +0900)]
ARM: shmobile: Consolidate the pm code for R-Car Gen2
The pm code for R-Car Gen2 is scatterd in each SoC. These files
(pm-r8a7790.c/pm-r8a7791.c) have some overlap code. This change
consolidate the pm code for R-Car Gen2 into one.
Simon Horman [Thu, 12 Mar 2015 03:55:37 +0000 (12:55 +0900)]
ARM: shmobile: r8a7791: Correct SYSCIER value
Set the SYSCIER as per the values indicated in the documentation.
The value previously used appears to been copied from the r8a7779
implementation but on closer inspection is not correct for the r8a7791.
Simon Horman [Thu, 12 Mar 2015 03:55:36 +0000 (12:55 +0900)]
ARM: shmobile: r8a7790: Correct SYSCIER value
Set the SYSCIER as per the values indicated in the documentation.
The value previously used appears to been copied from the r8a7779
implementation but on closer inspection is not correct for the r8a7790.
Arnd Bergmann [Fri, 13 Mar 2015 21:08:58 +0000 (22:08 +0100)]
Merge tag 'at91-cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/cleanup
Pull "Second batch of cleanup for 4.1" from Nicolas Ferre:
- remove unused matrix header files
- dbgu + chip identification: new driver for SoC detection
this allow to remove all additional io mapping
- remove old non-standard AT91 setup code
First batch of cleanup for 4.1:
- little phy fixup that is not needed anymore
- hudge cleanup of the PM code:
- removal of "use slow clock" option => always use this for suspend to RAM
- quicker suspend as the asm function is copied only once to SRAM
- use of the same asm function for "standby" and "mem" types of suspend
actions
- adaptation to the ARMv7 processors
* tag 'at91-cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: (44 commits)
ARM: at91: remove old setup
ARM: at91: sama5d4: remove useless map_io
ARM: at91: sama5 use SoC detection infrastructure
ARM: at91: at91sam9: use SoC detection infrastructure
ARM: at91: at91rm9200 use SoC detection infrastructure
ARM: at91: add soc detection infrastructure
ARM: at91/dt: introduce atmel,<chip>-dbgu
ARM: at91: remove unused _matrix.h headers
ARM: at91: remove unused at91_ioremap_matrix and header
ARM: at91: remove NEED_MACH_IO_H
ARM: at91/pm: flush data cache and clean, invalidate and disable the L2 cache
ARM: at91/pm_suspend: add the WFI instruction support for ARMv7
ARM: at91/pm: remove unused void (*at91_pm_standby)(void)
ARM: at91/pm: rename function name: at91_slow_clock() --> at91_pm_suspend_sram_fn()
ARM: at91/pm: rename file name: pm_slowclock.S --> pm_suspend.S
ARM: at91/pm: standby mode uses same sram function as suspend to memory mode
ARM: at91/pm: move the copying the sram function to the sram initialization phase
ARM: at91/pm_slowclock: create the procedure to handle the sdram self-refresh
ARM: at91/pm_slowclock: remove clocks which are already stopped when entering slow clock mode
ARM: at91/pm: remove CONFIG_AT91_SLOW_CLOCK config option
...
Arnd Bergmann [Thu, 12 Mar 2015 14:54:23 +0000 (15:54 +0100)]
ARM: at91: remove NEED_MACH_IO_H
The mach/io.h header on at91 is used to support a nonstandard I/O space
window for the cf card driver. This changes the driver to use pci_ioremap_io
in order to have the standard location, and then removes the custom
mach/io.h.
Wenyou Yang [Mon, 9 Mar 2015 03:54:26 +0000 (11:54 +0800)]
ARM: at91/pm: flush data cache and clean, invalidate and disable the L2 cache
Flush data cache, and clean, invalidate and disable the L2 cache before going to suspend.
Restore the L2 cache configuration and re-enable the L2 cache after waking up.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Wenyou Yang [Mon, 9 Mar 2015 03:51:09 +0000 (11:51 +0800)]
ARM: at91/pm: rename function name: at91_slow_clock() --> at91_pm_suspend_sram_fn()
As the file name is renamed, rename the function name at91_slow_clock()
--> at91_pm_suspend_sram_fn(), rename the function handler's name at the
same time.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
[nicolas.ferre@atmel.com: little update of the commit message] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Wenyou Yang [Mon, 9 Mar 2015 03:49:46 +0000 (11:49 +0800)]
ARM: at91/pm: standby mode uses same sram function as suspend to memory mode
To simply the PM code, the suspend to standby mode uses same sram function
as the suspend to memory mode, running in the internal SRAM, instead of the
respective code for each mode.
For the suspend to standby mode, the master clock doesn't switch to the slow
clock, and PLLA and the main oscillator doesn't turn off as well.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
The slow clock always exists, selecting CONFIG_AT91_SLOW_CLOCK config
is unnecessary for the suspend to memory mode.
For this mode the master clock should always switch to the slow clock.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Wenyou Yang [Mon, 9 Mar 2015 03:44:50 +0000 (11:44 +0800)]
ARM: at91: move "select SRAM" under SOC_AT91SAM9 and SOC_SAMA5
To simply the PM config the CONFIG_AT91_SLOW_CLOCK option will be removed,
so move "select SRAM" from under AT91_SLOW_CLOCK, add "select SRAM if PM"
under SOC_AT91SAM9 and SOC_SAMA5
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Boris Brezillon [Wed, 4 Mar 2015 11:20:12 +0000 (12:20 +0100)]
ARM: at91: remove ksz8081 phy fixup registration for sama5d4ek board
Commit 2b0ba96cea60 ("net: phy: micrel: disable NAND-tree for KSZ8021,
KSZ8031, KSZ8051, KSZ8081") automated the NAND-tree mode deactivation
process, thus making this phy fixup useless.
Remove it along with the associated headers inclusion.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[nicolas.ferre@atmel.com: remove selection of PHYLIB in at91 Kconfig] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Nicolas Ferre [Thu, 12 Mar 2015 14:30:03 +0000 (15:30 +0100)]
Merge tag 'at91-fixes3' into at91-4.1-cleanup
Third fixes batch for AT91 on 4.0:
- clock fixes for USB
- compatible string changes for handling USB IP differences
(+ needed AHB matrix syscon)
- fix of a compilation error in PM code
Nicolas Ferre [Thu, 12 Mar 2015 14:30:00 +0000 (15:30 +0100)]
Merge tag 'at91-fixes2' into at91-4.1-cleanup
Second fixes batch for AT91 on 4.0:
- little fix for !MMU debug: may also help for randconfig
- fix of 2 errors in LCD clock definitions
- in PM code, not writing the key leads to not execute the action
Nicolas Ferre [Thu, 12 Mar 2015 14:29:56 +0000 (15:29 +0100)]
Merge tag 'at91-fixes' into at91-4.1-cleanup
First fixes batch for AT91 on 4.0:
- PM slowclock fixes for DDR and timeouts
- fix some DT entries
- little defconfig updates
- the removal of a harmful watchdog option + its detailed documentation
ARM: shmobile: R-Car Gen2: CONFIG_COMMON_CLK is always set
Since commit e042681894b62d60 ("ARM: shmobile: r8a7790: Remove legacy
code"), all R-Car Gen2 SoCs are supported by multiplatform kernels only.
As CONFIG_COMMON_CLK is always set for multiplatform kernels, we can
remove related #ifdefs in code specific to R-Car Gen2 SoCs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Nicolas Ferre [Mon, 9 Mar 2015 15:51:13 +0000 (16:51 +0100)]
ARM: at91/dt: fix USB high-speed clock to select UTMI
The UTMI clock must be selected by any high-speed USB IP. The logic behind it
needs this particular clock.
So, correct the clock in the device tree files affected.
Reported-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: <stable@vger.kernel.org> #3.18
Boris Brezillon [Wed, 3 Dec 2014 11:32:10 +0000 (12:32 +0100)]
ARM: at91/dt: fix at91 udc compatible strings
The at91rm9200, at91sam9260, at91sam9261 and at91sam9263 SoCs have slightly
different UDC IPs.
Those differences were previously handled with cpu_is_at91xx macro which
are about to be dropped for multi-platform support, thus we need to
change compatible strings.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Boris Brezillon [Wed, 3 Dec 2014 11:32:09 +0000 (12:32 +0100)]
ARM: at91/dt: declare matrix node as a syscon device
There is no specific driver handling the AHB matrix, this is a simple syscon
device. the matrix is needed by several other drivers including the USB on some
SoCs (at91sam9261 for instance).
Without this definition, the USB will not work on these SoCs.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Boris BREZILLON [Fri, 1 Aug 2014 07:41:46 +0000 (09:41 +0200)]
ARM: at91/dt: sama5d4: fix lcdck clock definition
lcdck takes mck (not smd) as its parent. It is also assigned id 3 and not 4.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
[nicolas.ferre@atmel.com: squashed 2 related patches] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
ARM: mvebu: add __initconst specifiers on DT_MACHINE_START dt_compat tables
As suggested by Stephen Boyd, this commit adds the __initconst
specifier to the dt_compat table declarations used by the
DT_MACHINE_START structures in mach-mvebu land.
Michel Marti [Tue, 23 Dec 2014 11:41:43 +0000 (12:41 +0100)]
ARM: at91/dt: keep watchdog running in idle mode
Since turning on idle-halt in commit fe46aa679f12 (ARM: at91/dt: add
sam9 watchdog default options to SoCs), SoCs compatible with at91sam9260-wdt
no longer reboot if the watchdog times out while the CPU is in idle state.
Removing the 'idle-halt' flag that was set by default fixes this.
Signed-off-by: Michel Marti <mma@objectxp.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
[nicolas.ferre@atmel.com: rework the commit message] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Sylvain Rochet [Sun, 18 Jan 2015 13:26:50 +0000 (14:26 +0100)]
dts: Documentation: AT91 Watchdog, explain what atmel,idle-halt property really do
atmel,idle-halt property should be used with care, it actually makes the
watchdog not counting when the CPU is in idle state, therefore the
watchdog reset time depends on mean CPU usage and will not reset at all
of the CPU stop working while it is in idle state, which is probably not
what you want.
Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexander Stein [Wed, 25 Feb 2015 08:35:04 +0000 (09:35 +0100)]
ARM: at91/dt: at91sam9263: Fixup sram1 device tree node
Commit ff04660e48b20 ("ARM: at91/dt: add SRAM nodes") used the same base
address for sram0 and sram1 leading to the following warning:
WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x50/0x70()
sysfs: cannot create duplicate filename '/devices/platform/300000.sram'
Fix the base address for sram1.
Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
On some platforms, there are multiple SRAM nodes defined in the device tree but
some of them are disabled, leading to allocation failure. Try to find the first
enabled SRAM node and allocate from it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
at91rm9200 standby and suspend to ram has been broken since 00482a4078f4. It is wrongly using AT91_BASE_SYS which is a physical address
and actually doesn't correspond to any register on at91rm9200.
Use the correct at91_ramc_base[0] instead.
Fixes: 00482a4078f4 (ARM: at91: implement the standby function for pm/cpuidle) Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Peter Rosin [Thu, 5 Feb 2015 06:02:09 +0000 (14:02 +0800)]
pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.
The DDRSDR controller fails miserably to put LPDDR1 memories in
self-refresh. Force the controller to think it has DDR2 memories
during the self-refresh period, as the DDR2 self-refresh spec is
equivalent to LPDDR1, and is correctly implemented in the
controller.
Assume that the second controller has the same fault, but that is
untested.
Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Sylvain Rochet [Thu, 5 Feb 2015 06:00:37 +0000 (14:00 +0800)]
pm: at91: pm_slowclock: fix suspend/resume hang up in timeouts
Removed timeout on XTAL, PLL lock and Master Clock Ready, hang if
something went wrong instead of continuing in unknown condition. There
is not much we can do if a PLL lock never ends, we are running in SRAM
and we will not be able to connect back the sdram or ddram in order to
be able to fire up a message or just panic.
As a bonus, not decounting the timeout register in slow clock mode
reduce cumulated suspend time and resume time from ~17ms to ~15ms.
Daniel Vetter [Tue, 3 Mar 2015 16:31:21 +0000 (17:31 +0100)]
drm/i915: Fix modeset state confusion in the load detect code
This is a tricky story of the new atomic state handling and the legacy
code fighting over each another. The bug at hand is an underrun of the
framebuffer reference with subsequent hilarity caused by the load
detect code. Which is peculiar since the the exact same code works
fine as the implementation of the legacy setcrtc ioctl.
Let's look at the ingredients:
- Currently our code is a crazy mix of legacy modeset interfaces to
set the parameters and half-baked atomic state tracking underneath.
While this transition is going we're using the transitional plane
helpers to update the atomic side (drm_plane_helper_disable/update
and friends), i.e. plane->state->fb. Since the state structure owns
the fb those functions take care of that themselves.
The legacy state (specifically crtc->primary->fb) is still managed
by the old code (and mostly by the drm core), with the fb reference
counting done by callers (core drm for the ioctl or the i915 load
detect code). The relevant commit is
- drm_plane_helper_disable has special code to handle multiple calls
in a row - it checks plane->crtc == NULL and bails out. This is to
match the proper atomic implementation which needs the crtc to get
at the implied locking context atomic updates always need. See
- The universal plane code split out the implicit primary plane from
the CRTC into it's own full-blown drm_plane object. As part of that
the setcrtc ioctl (which updated both the crtc mode and primary
plane) learned to set crtc->primary->crtc on modeset to make sure
the plane->crtc assignments statate up to date in
Unfortunately we've forgotten to update the load detect code. Which
wasn't a problem since the load detect modeset is temporary and
always undone before we drop the locks.
- Finally there is a organically grown history (i.e. don't ask) around
who sets the legacy plane->fb for the various driver entry points.
Originally updating that was the drivers duty, but for almost all
places we've moved that (plus updating the refcounts) into the core.
Again the exception is the load detect code.
Taking all together the following happens:
- The load detect code doesn't set crtc->primary->crtc. This is only
really an issue on crtcs never before used or when userspace
explicitly disabled the primary plane.
- The plane helper glue code short-circuits because of that and leaves
a non-NULL fb behind in plane->state->fb and plane->fb. The state
fb isn't a real problem (it's properly refcounted on its own), it's
just the canary.
- Load detect code drops the reference for that fb, but doesn't set
plane->fb = NULL. This is ok since it's still living in that old
world where drivers had to clear the pointer but the core/callers
handled the refcounting.
- On the next modeset the drm core notices plane->fb and takes care of
refcounting it properly by doing another unref. This drops the
refcount to zero, leaving state->plane now pointing at freed memory.
- intel_plane_duplicate_state still assume it owns a reference to that
very state->fb and bad things start to happen.
Fix this all by applying the same duct-tape as for the legacy setcrtc
ioctl code and set crtc->primary->crtc properly.
Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Rob Clark <robdclark@gmail.com> Cc: Paulo Zanoni <przanoni@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Matt Roper <matthew.d.roper@intel.com> Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 2 Mar 2015 22:13:39 +0000 (14:13 -0800)]
Merge tag 'gpio-v4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Two GPIO fixes:
- Fix a translation problem in of_get_named_gpiod_flags()
- Fix a long standing container_of() mistake in the TPS65912 driver"
* tag 'gpio-v4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: tps65912: fix wrong container_of arguments
gpiolib: of: allow of_gpiochip_find_and_xlate to find more than one chip per node
Linus Torvalds [Mon, 2 Mar 2015 22:08:10 +0000 (14:08 -0800)]
Merge branch 'fixes-for-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal management fixes from Eduardo Valentin:
"Specifics:
- Several fixes in tmon tool.
- Fixes in intel int340x for _ART and _TRT tables.
- Add id for Avoton SoC into powerclamp driver.
- Fixes in RCAR thermal driver to remove race conditions and fix fail
path
- Fixes in TI thermal driver: removal of unnecessary code and build
fix if !CONFIG_PM_SLEEP
- Cleanups in exynos thermal driver
- Add stubs for include/linux/thermal.h. Now drivers using thermal
calls but that also work without CONFIG_THERMAL will be able to
compile for systems that don't care about thermal.
Note: I am sending this pull on Rui's behalf while he fixes issues in
his Linux box"
* 'fixes-for-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: int340x_thermal: Ignore missing _ART, _TRT tables
thermal/intel_powerclamp: add id for Avoton SoC
tools/thermal: tmon: silence 'set but not used' warnings
tools/thermal: tmon: use pkg-config to determine library dependencies
tools/thermal: tmon: support cross-compiling
tools/thermal: tmon: add .gitignore
tools/thermal: tmon: fixup tui windowing calculations
tools/thermal: tmon: tui: don't hard-code dialog window size assumptions
tools/thermal: tmon: add min/max macros
tools/thermal: tmon: add --target-temp parameter
thermal: exynos: Clean-up code to use oneline entry for exynos compatible table
thermal: rcar: Make error and remove paths symmetrical with init
thermal: rcar: Fix race condition between init and interrupt
thermal: Introduce dummy functions when thermal is not defined
ti-soc-thermal: Delete an unnecessary check before the function call "cpufreq_cooling_unregister"
thermal: ti-soc-thermal: bandgap: Fix build warning if !CONFIG_PM_SLEEP
Linus Torvalds [Mon, 2 Mar 2015 22:03:27 +0000 (14:03 -0800)]
Merge tag 'md/4.0-fixes' of git://neil.brown.name/md
Pull md fixes from Neil Brown:
"Three md fixes:
- fix a read-balance problem that was reported 2 years ago, but that
I never noticed the report :-(
- fix for rare RAID6 problem causing incorrect bitmap updates when
two devices fail.
- add __ATTR_PREALLOC annotation now that it is possible"
* tag 'md/4.0-fixes' of git://neil.brown.name/md:
md: mark some attributes as pre-alloc
raid5: check faulty flag for array status during recovery.
md/raid1: fix read balance when a drive is write-mostly.
Linus Torvalds [Mon, 2 Mar 2015 22:02:17 +0000 (14:02 -0800)]
Merge tag 'metag-fixes-v4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag
Pull arch/metag fix from James Hogan:
"This is just a single patch to fix the KSTK_EIP() and KSTK_ESP()
macros for metag which have always been erronously returning the PC
and stack pointer of the task's kernel context rather than from its
user context saved at entry from userland into the kernel, which
affects the contents of /proc/<pid>/maps and /proc/<pid>/stat"
* tag 'metag-fixes-v4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
metag: Fix KSTK_EIP() and KSTK_ESP() macros
Linus Torvalds [Sun, 1 Mar 2015 20:22:44 +0000 (12:22 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"A CR4-shadow 32-bit init fix, plus two typo fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Init per-cpu shadow copy of CR4 on 32-bit CPUs too
x86/platform/intel-mid: Fix trivial printk message typo in intel_mid_arch_setup()
x86/cpu/intel: Fix trivial typo in intel_tlb_table[]
Linus Torvalds [Sun, 1 Mar 2015 19:56:13 +0000 (11:56 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Two kprobes fixes and a handful of tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Make sparc64 arch point to sparc
perf symbols: Define EM_AARCH64 for older OSes
perf top: Fix SIGBUS on sparc64
perf tools: Fix probing for PERF_FLAG_FD_CLOEXEC flag
perf tools: Fix pthread_attr_setaffinity_np build error
perf tools: Define _GNU_SOURCE on pthread_attr_setaffinity_np feature check
perf bench: Fix order of arguments to memcpy_alloc_mem
kprobes/x86: Check for invalid ftrace location in __recover_probed_insn()
kprobes/x86: Use 5-byte NOP when the code might be modified by ftrace
locking/rtmutex: Set state back to running on error
The "usual" path is:
- rt_mutex_slowlock()
- set_current_state()
- task_blocks_on_rt_mutex() (ret 0)
- __rt_mutex_slowlock()
- sleep or not but do return with __set_current_state(TASK_RUNNING)
- back to caller.
In the early error case where task_blocks_on_rt_mutex() return
-EDEADLK we never change the task's state back to RUNNING. I
assume this is intended. Without this change after ww_mutex
using rt_mutex the selftest passes but later I get plenty of:
| bad: scheduling from the idle thread!
backtraces.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: afffc6c1805d ("locking/rtmutex: Optimize setting task running after being blocked") Link: http://lkml.kernel.org/r/1425056229-22326-4-git-send-email-bigeasy@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Sat, 28 Feb 2015 18:36:48 +0000 (10:36 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Just general fixes: radeon, i915, atmel, tegra, amdkfd and one core
fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (28 commits)
drm: atmel-hlcdc: remove clock polarity from crtc driver
drm/radeon: only enable DP audio if the monitor supports it
drm/radeon: fix atom aux payload size check for writes (v2)
drm/radeon: fix 1 RB harvest config setup for TN/RL
drm/radeon: enable SRBM timeout interrupt on EG/NI
drm/radeon: enable SRBM timeout interrupt on SI
drm/radeon: enable SRBM timeout interrupt on CIK v2
drm/radeon: dump full IB if we hit a packet error
drm/radeon: disable mclk switching with 120hz+ monitors
drm/radeon: use drm_mode_vrefresh() rather than mode->vrefresh
drm/radeon: enable native backlight control on old macs
drm/i915: Fix frontbuffer false positve.
drm/i915: Align initial plane backing objects correctly
drm/i915: avoid processing spurious/shared interrupts in low-power states
drm/i915: Check obj->vma_list under the struct_mutex
drm/i915: Fix a use after free, and unbalanced refcounting
drm: atmel-hlcdc: remove useless pm_runtime_put_sync in probe
drm: atmel-hlcdc: reset layer A2Q and UPDATE bits when disabling it
drm: Fix deadlock due to getconnector locking changes
drm/i915: Dell Chromebook 11 has PWM backlight
...
Linus Torvalds [Sat, 28 Feb 2015 18:06:33 +0000 (10:06 -0800)]
Merge tag 'xfs-for-linus-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs fixes from Dave Chinner:
"These are fixes for regressions/bugs introduced in the 4.0 merge cycle
and problems discovered during the merge window that need to be pushed
back to stable kernels ASAP.
This contains:
- ensure quota type is reset in on-disk dquots
- fix missing partial EOF block data flush on truncate extension
- fix transaction leak in error handling for new pnfs block layout
support
- add missing target_ip check to RENAME_EXCHANGE"
* tag 'xfs-for-linus-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: cancel failed transaction in xfs_fs_commit_blocks()
xfs: Ensure we have target_ip for RENAME_EXCHANGE
xfs: ensure truncate forces zeroed blocks to disk
xfs: Fix quota type in quota structures when reusing quota file
Core mm expects __PAGETABLE_{PUD,PMD}_FOLDED to be defined if these page
table levels folded. Usually, these defines are provided by
<asm-generic/pgtable-nopmd.h> and <asm-generic/pgtable-nopud.h>.
But some architectures fold page table levels in a custom way. They
need to define these macros themself. This patch adds missing defines.
The patch fixes mm->nr_pmds underflow and eliminates dead __pmd_alloc()
and __pud_alloc() on architectures without these page table levels.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Historically, !__GFP_FS allocations were not allowed to invoke the OOM
killer once reclaim had failed, but nevertheless kept looping in the
allocator.
Commit 9879de7373fc ("mm: page_alloc: embed OOM killing naturally into
allocation slowpath"), which should have been a simple cleanup patch,
accidentally changed the behavior to aborting the allocation at that
point. This creates problems with filesystem callers (?) that currently
rely on the allocator waiting for other tasks to intervene.
Revert the behavior as it shouldn't have been changed as part of a
cleanup patch.
Fixes: 9879de7373fc ("mm: page_alloc: embed OOM killing naturally into allocation slowpath") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Dave Chinner <david@fromorbit.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> [3.19.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Fri, 27 Feb 2015 23:52:01 +0000 (15:52 -0800)]
zram: use proper type to update max_used_pages
max_used_pages is defined as atomic_long_t so we need to use unsigned
long to keep temporary value for it rather than int which is smaller
than unsigned long in a 64 bit system.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joshua Kinard [Fri, 27 Feb 2015 23:51:59 +0000 (15:51 -0800)]
drivers/rtc/rtc-ds1685.c: fix conditional in ds1685_rtc_sysfs_time_regs_{show,store}
Fix a conditional statement checking for NULL in both
ds1685_rtc_sysfs_time_regs_show and ds1685_rtc_sysfs_time_regs_store
that was using a logical AND when it should be using a logical OR so
that we fail out of the function properly if the condition ever
evaluates to true.
Fixes: aaaf5fbf56f1 ("rtc: add driver for DS1685 family of real time clocks") Signed-off-by: Joshua Kinard <kumba@gentoo.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ryusuke Konishi [Fri, 27 Feb 2015 23:51:56 +0000 (15:51 -0800)]
nilfs2: fix potential memory overrun on inode
Each inode of nilfs2 stores a root node of a b-tree, and it turned out to
have a memory overrun issue:
Each b-tree node of nilfs2 stores a set of key-value pairs and the number
of them (in "bn_nchildren" member of nilfs_btree_node struct), as well as
a few other "bn_*" members.
Since the value of "bn_nchildren" is used for operations on the key-values
within the b-tree node, it can cause memory access overrun if a large
number is incorrectly set to "bn_nchildren".
For instance, nilfs_btree_node_lookup() function determines the range of
binary search with it, and too large "bn_nchildren" leads
nilfs_btree_node_get_key() in that function to overrun.
As for intermediate b-tree nodes, this is prevented by a sanity check
performed when each node is read from a drive, however, no sanity check
has been done for root nodes stored in inodes.
This patch fixes the issue by adding missing sanity check against b-tree
root nodes so that it's called when on-memory inodes are read from ifile,
inode metadata file.
This got lost during the initial merge process: Python requires an
__init__.py script, even if empty, in order to accept a directory as
package. Add it, this time as a non-empty file.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rtc: ds1685: remove superfluous checks for out-of-range u8 values
drivers/rtc/rtc-ds1685.c: In function `ds1685_rtc_read_alarm':
drivers/rtc/rtc-ds1685.c:402: warning: comparison is always true due to limited range of data type
drivers/rtc/rtc-ds1685.c:409: warning: comparison is always true due to limited range of data type
drivers/rtc/rtc-ds1685.c:416: warning: comparison is always true due to limited range of data type
drivers/rtc/rtc-ds1685.c: In function `ds1685_rtc_set_alarm':
drivers/rtc/rtc-ds1685.c:475: warning: comparison is always true due to limited range of data type
drivers/rtc/rtc-ds1685.c:478: warning: comparison is always true due to limited range of data type
drivers/rtc/rtc-ds1685.c:481: warning: comparison is always true due to limited range of data type
u8 cannot contain a value larger than 0xff, hence drop the checks.
Wrapping the checks in unlikely() indicated some sense of humor, though ;-)
The newly added ds1685 driver causes a build error when enabled without
CONFIG_RTC_INTF_DEV:
drivers/rtc/rtc-ds1685.c:919:22: error: 'ds1685_rtc_alarm_irq_enable' undeclared here (not in a function)
.alarm_irq_enable = ds1685_rtc_alarm_irq_enable,
Apparently the driver was incorrectly changed to reflect the interface
change from 16380c153a69c ("RTC: Convert rtc drivers to use the
alarm_irq_enable method"), which removed the respective #ifdef from all
other rtc drivers.
This does the same change that was merged for the other drivers before and
removes the #ifdef, allowing the interrupts to be enabled through the
in-kernel rtc interface independent of the existence of /dev/rtc.
Fixes: aaaf5fbf56f ("rtc: add driver for DS1685 family of real time clocks") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Joshua Kinard <kumba@gentoo.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 27 Feb 2015 23:51:46 +0000 (15:51 -0800)]
memcg: fix low limit calculation
A memcg is considered low limited even when the current usage is equal to
the low limit. This leads to interesting side effects e.g.
groups/hierarchies with no memory accounted are considered protected and
so the reclaim will emit MEMCG_LOW event when encountering them.
Another and much bigger issue was reported by Joonsoo Kim. He has hit a
NULL ptr dereference with the legacy cgroup API which even doesn't have
low limit exposed. The limit is 0 by default but the initial check fails
for memcg with 0 consumption and parent_mem_cgroup() would return NULL if
use_hierarchy is 0 and so page_counter_read would try to dereference NULL.
I suppose that the current implementation is just an overlook because the
documentation in Documentation/cgroups/unified-hierarchy.txt says:
"The memory.low boundary on the other hand is a top-down allocated
reserve. A cgroup enjoys reclaim protection when it and all its
ancestors are below their low boundaries"
Fix the usage and the low limit comparision in mem_cgroup_low accordingly.
Fixes: 241994ed8649 (mm: memcontrol: default hierarchy interface for memory) Reported-by: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Fri, 27 Feb 2015 23:51:43 +0000 (15:51 -0800)]
mm/nommu: fix memory leak
Maxime reported the following memory leak regression due to commit dbc8358c7237 ("mm/nommu: use alloc_pages_exact() rather than its own
implementation").
On v3.19, I am facing a memory leak. Each time I run a command one page
is lost. Here an example with busybox's free command:
/ # free
total used free shared buffers cached
Mem: 7928 1972 5956 0 0 492
-/+ buffers/cache: 1480 6448
/ # free
total used free shared buffers cached
Mem: 7928 1976 5952 0 0 492
-/+ buffers/cache: 1484 6444
/ # free
total used free shared buffers cached
Mem: 7928 1980 5948 0 0 492
-/+ buffers/cache: 1488 6440
/ # free
total used free shared buffers cached
Mem: 7928 1984 5944 0 0 492
-/+ buffers/cache: 1492 6436
/ # free
total used free shared buffers cached
Mem: 7928 1988 5940 0 0 492
-/+ buffers/cache: 1496 6432
At some point, the system fails to sastisfy 256KB allocations:
This problem happens because we allocate ordered page through
__get_free_pages() in do_mmap_private() in some cases and we try to free
individual pages rather than ordered page in free_page_series(). In
this case, freeing pages whose refcount is not 0 won't be freed to the
page allocator so memory leak happens.
To fix the problem, this patch changes __get_free_pages() to
alloc_pages_exact() since alloc_pages_exact() returns
physically-contiguous pages but each pages are refcounted.
Fixes: dbc8358c7237 ("mm/nommu: use alloc_pages_exact() rather than its own implementation"). Reported-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Tested-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <stable@vger.kernel.org> [3.19] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-beck.git / log