Gu Zheng [Thu, 26 Dec 2013 10:24:19 +0000 (18:24 +0800)]
f2fs: convert max_orphans to a field of f2fs_sb_info
Previously, we need to calculate the max orphan num when we try to acquire an
orphan inode, but it's a stable value since the super block was inited. So
converting it to a field of f2fs_sb_info and use it directly when needed seems
a better choose.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Thu, 26 Dec 2013 11:15:09 +0000 (20:15 +0900)]
f2fs: check the blocksize before calling generic_direct_IO path
The f2fs supports 4KB block size. If user requests dwrite with under 4KB data,
it allocates a new 4KB data block.
However, f2fs doesn't add zero data into the untouched data area inside the
newly allocated data block.
This incurs an error during the xfstest #263 test as follow.
263 12s ... [failed, exit status 1] - output mismatch (see 263.out.bad)
--- 263.out 2013-03-09 03:37:15.043967603 +0900
+++ 263.out.bad 2013-12-27 04:20:39.230203114 +0900
@@ -1,3 +1,976 @@
QA output created by 263
fsx -N 10000 -o 8192 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z
-fsx -N 10000 -o 128000 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z
+fsx -N 10000 -o 8192 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z
+truncating to largest ever: 0x12a00
+truncating to largest ever: 0x75400
+fallocating to largest ever: 0x79cbf
...
(Run 'diff -u 263.out 263.out.bad' to see the entire diff)
Ran: 263
Failures: 263
Failed 1 of 1 tests
It turns out that, when the test tries to write 2KB data with dio, the new dio
path allocates 4KB data block without filling zero data inside the remained 2KB
area. Finally, the output file contains a garbage data for that region.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Thu, 26 Dec 2013 07:55:22 +0000 (16:55 +0900)]
f2fs: should put the dnode when NEW_ADDR is detected
When get_dnode_of_data() in get_data_block() returns a successful dnode, we
should put the dnode.
But, previously, if its data block address is equal to NEW_ADDR, we didn't do
that, resulting in a deadlock condition.
So, this patch splits original error conditions with this case, and then calls
f2fs_put_dnode before finishing the function.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Thu, 26 Dec 2013 07:30:41 +0000 (16:30 +0900)]
f2fs: introduce F2FS_INODE macro to get f2fs_inode
This patch introduces F2FS_INODE that returns struct f2fs_inode * from the inode
page.
By using this macro, we can remove unnecessary casting codes like below.
Chao Yu [Mon, 23 Dec 2013 03:12:21 +0000 (11:12 +0800)]
f2fs: check filename length in recover_dentry
In current flow, we will get Null return value of f2fs_find_entry in
recover_dentry when name.len is bigger than F2FS_NAME_LEN, and then we
still add this inode into its dir entry.
To avoid this situation, we must check filename length before we use it.
Another point is that we could remove the code of checking filename length
In f2fs_find_entry, because f2fs_lookup will be called previously to ensure of
validity of filename length.
V2:
o add WARN_ON() as Jaegeuk Kim suggested.
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Chao Yu [Sat, 21 Dec 2013 10:03:28 +0000 (18:03 +0800)]
f2fs: avoid to set wrong pino of inode when rename dir
When we rename a dir to new name which is not exist previous,
we will set pino of parent inode with ino of child inode in f2fs_set_link.
It destroy consistency of pino, it should be fixed.
Thanks for previous work of Shu Tan.
Signed-off-by: Shu Tan <shu.tan@samsung.com> Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Chao Yu [Sat, 21 Dec 2013 10:02:14 +0000 (18:02 +0800)]
f2fs: update several comments
Update several comments:
1. use f2fs_{un}lock_op install of mutex_{un}lock_op.
2. update comment of get_data_block().
3. update description of node offset.
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Gu Zheng [Fri, 20 Dec 2013 10:17:49 +0000 (18:17 +0800)]
f2fs: remove the rw_flag domain from f2fs_io_info
When using the f2fs_io_info in the low level, we still need to merge the
rw and rw_flag, so use the rw to hold all the io flags directly,
and remove the rw_flag field.
ps.It is based on the previous patch:
f2fs: move all the bio initialization into __bio_alloc
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Tue, 17 Dec 2013 08:28:41 +0000 (17:28 +0900)]
f2fs: write dirty meta pages collectively
This patch enhances writing dirty meta pages collectively in background.
During the file data writes, it'd better avoid to write small dirty meta pages
frequently.
So let's give a chance to collect a number of dirty meta pages for a while.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Mon, 16 Dec 2013 10:04:05 +0000 (19:04 +0900)]
f2fs: introduce a new direct_IO write path
Previously, f2fs doesn't support direct IOs with high performance, which throws
every write requests via the buffered write path, resulting in highly
performance degradation due to memory opeations like copy_from_user.
This patch introduces a new direct IO path in which every write requests are
processed by generic blockdev_direct_IO() with enhanced get_block function.
The get_data_block() in f2fs handles:
1. if original data blocks are allocates, then give them to blockdev.
2. otherwise,
a. preallocate requested block addresses
b. do not use extent cache for better performance
c. give the block addresses to blockdev
This policy induces that:
- new allocated data are sequentially written to the disk
- updated data are randomly written to the disk.
- f2fs gives consistency on its file meta, not file data.
Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Thu, 7 Nov 2013 04:13:42 +0000 (13:13 +0900)]
f2fs: introduce sysfs entry to control in-place-update policy
This patch introduces new sysfs entries for users to control the policy of
in-place-updates, namely IPU, in f2fs.
Sometimes f2fs suffers from performance degradation due to its out-of-place
update policy that produces many additional node block writes.
If the storage performance is very dependant on the amount of data writes
instead of IO patterns, we'd better drop this out-of-place update policy.
This patch suggests 5 polcies and their triggering conditions as follows.
[sysfs entry name = ipu_policy]
0: F2FS_IPU_FORCE all the time,
1: F2FS_IPU_SSR if SSR mode is activated,
2: F2FS_IPU_UTIL if FS utilization is over threashold,
3: F2FS_IPU_SSR_UTIL if SSR mode is activated and FS utilization is over
threashold,
4: F2FS_IPU_DISABLE disable IPU. (=default option)
[sysfs entry name = min_ipu_util]
This parameter controls the threshold to trigger in-place-updates.
The number indicates percentage of the filesystem utilization, and used by
F2FS_IPU_UTIL and F2FS_IPU_SSR_UTIL policies.
For more details, see need_inplace_update() in segment.h.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Fan Li [Mon, 9 Dec 2013 08:09:00 +0000 (16:09 +0800)]
f2fs: merge pages with the same sync_mode flag
Previously f2fs submits most of write requests using WRITE_SYNC, but f2fs_write_data_pages
submits last write requests by sync_mode flags callers pass.
This causes a performance problem since continuous pages with different sync flags
can't be merged in cfq IO scheduler(thanks yu chao for pointing it out), and synchronous
requests often take more time.
This patch makes the following modifies to DATA writebacks:
1. every page will be written back using the sync mode caller pass.
2. only pages with the same sync mode can be merged in one bio request.
These changes are restricted to DATA pages.Other types of writebacks are modified
To remain synchronous.
In my test with tiotest, f2fs sequence write performance is improved by about 7%-10% ,
and this patch has no obvious impact on other performance tests.
Signed-off-by: Fan Li <fanofcode.li@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Fri, 6 Dec 2013 06:00:58 +0000 (15:00 +0900)]
f2fs: add unlikely() macro for compiler more aggressively
This patch adds unlikely() macro into the most of codes.
The basic rule is to add that when:
- checking unusual errors,
- checking page mappings,
- and the other unlikely conditions.
Change log from v1:
- Don't add unlikely for the NULL test and error test: advised by Andi Kleen.
Chao Yu [Thu, 5 Dec 2013 09:15:22 +0000 (17:15 +0800)]
f2fs: add unlikely() macro for compiler optimization
As we know, some of our branch condition will rarely be true. So we could add
'unlikely' to let compiler optimize these code, by this way we could drop
unneeded 'jump' assemble code to improve performance.
change log:
o add *unlikely* as many as possible across the whole source files at once
suggested by Jaegeuk Kim.
Suggested-by: Jaegeuk Kim <jaegeuk.kim@samsung.com> Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Younger Liu [Tue, 3 Dec 2013 13:09:29 +0000 (21:09 +0800)]
f2fs: replace the debugfs_root with f2fs_debugfs_root
This minor change for the naming conventions of debugfs_root
to avoid any possible conflicts to the other filesystem.
Signed-off-by: Younger Liu <younger.liucn@gmail.com> Cc: Younger Liu <younger.liucn@gmail.com> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
[Jaegeuk Kim: change the patch name] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Younger Liu [Tue, 3 Dec 2013 12:11:46 +0000 (20:11 +0800)]
f2fs: remove debufs dir if debugfs_create_file() failed
When debugfs_create_file() failed in f2fs_create_root_stats(),
debugfs_root should be remove.
Signed-off-by: Younger Liu <liuyiyang@hisense.com> Cc: Younger Liu <younger.liucn@gmail.com> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Reviewed-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Chao Yu [Fri, 22 Nov 2013 07:48:54 +0000 (15:48 +0800)]
f2fs: readahead contiguous pages for restore_node_summary
If cp has no CP_UMOUNT_FLAG, we will read all pages in whole node segment
one by one, it makes low performance. So let's merge contiguous pages and
readahead for better performance.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: adjust the new bio operations] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Sat, 30 Nov 2013 03:51:14 +0000 (12:51 +0900)]
f2fs: refactor bio-related operations
This patch integrates redundant bio operations on read and write IOs.
1. Move bio-related codes to the top of data.c.
2. Replace f2fs_submit_bio with f2fs_submit_merged_bio, which handles read
bios additionally.
3. Introduce __submit_merged_bio to submit the merged bio.
4. Change f2fs_readpage to f2fs_submit_page_bio.
5. Introduce f2fs_submit_page_mbio to integrate previous submit_read_page and
submit_write_page.
Jaegeuk Kim [Sat, 30 Nov 2013 01:10:31 +0000 (10:10 +0900)]
f2fs: remove the own bi_private allocation
Previously f2fs allocates its own bi_private data structure all the time even
though we don't use it. But, can we remove this bi_private allocation?
This patch removes such the additional bi_private allocation.
1. Retrieve f2fs_sb_info from its page->mapping->host->i_sb.
- This removes the usecases of bi_private in end_io.
2. Use bi_private only when we really need it.
- The bi_private is used only when the checkpoint procedure is conducted.
- When conducting the checkpoint, f2fs submits a META_FLUSH bio to wait its bio
completion.
- Since we have no dependancies to remove bi_private now, let's just use
bi_private pointer as the completion pointer.
Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Chao Yu [Thu, 28 Nov 2013 07:43:07 +0000 (15:43 +0800)]
f2fs: use true and false for boolean variable
The inode_page_locked should be a boolean variable.
struct dnode_of_data {
struct inode *inode; /* vfs inode pointer */
struct page *inode_page; /* its inode page, NULL is possible */
struct page *node_page; /* cached direct node page */
nid_t nid; /* node id of the direct node block */
unsigned int ofs_in_node; /* data offset in the node page */
==> bool inode_page_locked; /* inode page is locked or not */
block_t data_blkaddr; /* block address of the node block */
};
Chao Yu [Thu, 28 Nov 2013 07:41:39 +0000 (15:41 +0800)]
f2fs: correct type of wait in struct bio_private
The void *wait in bio_private is used for waiting completion of checkpoint bio.
So we don't need to use its type as void, but declare it as completion type.
Chao Yu [Fri, 22 Nov 2013 08:52:50 +0000 (16:52 +0800)]
f2fs: remove unneeded code in punch_hole
Because FALLOC_FL_PUNCH_HOLE flag must be ORed with FALLOC_FL_KEEP_SIZE
in fallocate, so we could remove the useless 'keep size' branch code which
will never be excuted in punch_hole.
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Fan Li <fanofcode.li@samsung.com>
[Jaegeuk Kim: remove an unnecessary parameter togather] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Thu, 28 Nov 2013 03:44:05 +0000 (12:44 +0900)]
f2fs: bug fix on bit overflow from 32bits to 64bits
This patch fixes some bit overflows by the shift operations.
Dan Carpenter reported potential bugs on bit overflows as follows.
fs/f2fs/segment.c:910 submit_write_page()
warn: should 'blk_addr << ((sbi)->log_blocksize - 9)' be a 64 bit type?
fs/f2fs/checkpoint.c:429 get_valid_checkpoint()
warn: should '1 << ()' be a 64 bit type?
fs/f2fs/data.c:408 f2fs_readpage()
warn: should 'blk_addr << ((sbi)->log_blocksize - 9)' be a 64 bit type?
fs/f2fs/data.c:457 submit_read_page()
warn: should 'blk_addr << ((sbi)->log_blocksize - 9)' be a 64 bit type?
fs/f2fs/data.c:525 get_data_block_ro()
warn: should 'i << blkbits' be a 64 bit type?
Bug-Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Huajun Li [Sun, 10 Nov 2013 15:13:16 +0000 (23:13 +0800)]
f2fs: add flags and helpers to support inline data
Add new inode flags F2FS_INLINE_DATA and FI_INLINE_DATA to indicate
whether the inode has inline data.
Inline data makes use of inode block's data indices region to save small
file. Currently there are 923 data indices in an inode block. Since
inline xattr has made use of the last 50 indices to save its data, there
are 873 indices left which can be used for inline data. When
FI_INLINE_DATA is set, the layout of inode block's indices region is
like below:
+-----------------+
| | Reserved. reserve_new_block() will make use of
| i_addr[0] | i_addr[0] when we need to reserve a new data block
| | to convert inline data into regular one's.
|-----------------|
| | Used by inline data. A file whose size is less than
| i_addr[1~872] | 3488 bytes(~3.4k) and doesn't reserve extra
| | blocks by fallocate() can be saved here.
|-----------------|
| |
| i_addr[873~922] | Reserved for inline xattr
| |
+-----------------+
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: Huajun Li <huajun.li@intel.com> Signed-off-by: Weihong Xu <weihong.xu@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Chao Yu [Fri, 22 Nov 2013 01:09:59 +0000 (09:09 +0800)]
f2fs: read contiguous sit entry pages by merging for mount performance
Previously we read sit entries page one by one, this method lost the chance
of reading contiguous page together. So we read pages as contiguous as
possible for better mount performance.
change log:
o merge judgements/use 'Continue' or 'Break' instead of 'Goto' as Gu Zheng
suggested.
o add mark_page_accessed() before release page to delay VM reclaiming.
o remove '*order' for simplification of function as Jaegeuk Kim suggested.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: fix a bug on the block address calculation] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Changman Lee [Thu, 21 Nov 2013 11:04:21 +0000 (20:04 +0900)]
f2fs: simplify IS_DATASEG and IS_NODESEG macro
It is not efficient comparing each segment type to find node or data.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: remove unnecessary white spaces] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Thu, 21 Nov 2013 04:54:23 +0000 (13:54 +0900)]
f2fs: merge read IOs at ra_nat_pages()
Change log from v1:
o add mark_page_accessed() not to reclaim the nat pages.
This patch changes the policy of submitting read bios at ra_nat_pages.
Previously, f2fs submits small read bios with block plugging.
But, with this patch, f2fs itself merges read bios first and then submits a
large bio, which can reduce the bio handling overheads.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Gu Zheng [Tue, 19 Nov 2013 10:03:58 +0000 (18:03 +0800)]
f2fs: simplify write_orphan_inodes for better readable
Simplify write_orphan_inodes for better readable. Because we hold the
orphan_inode_mutex, so it's safe to use list_for_each_entry instead of
list_for_each_safe.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Tue, 19 Nov 2013 03:47:22 +0000 (12:47 +0900)]
f2fs: introduce a bio array for per-page write bios
The f2fs has three bio types, NODE, DATA, and META, and manages some data
structures per each bio types.
The codes are a little bit messy, thus, this patch introduces a bio array
which groups individual data structures as follows.
struct f2fs_bio_info {
struct bio *bio; /* bios to merge */
sector_t last_block_in_bio; /* last block number */
struct mutex io_mutex; /* mutex for bio */
};
Jaegeuk Kim [Tue, 19 Nov 2013 01:41:54 +0000 (10:41 +0900)]
f2fs: disable the extent cache ops on high fragmented files
The f2fs manages an extent cache to search a number of consecutive data blocks
very quickly.
However it conducts unnecessary cache operations if the file is highly
fragmented with no valid extent cache.
In such the case, we don't need to handle the extent cache, but just can disable
the cache facility.
Nevertheless, this patch gives one more chance to enable the extent cache.
For example,
1. create a file
2. write data sequentially which produces a large valid extent cache
3. update some data, resulting in a fragmented extent
4. if the fragmented extent is too small, then drop extent cache
5. close the file
6. open the file again
7. give another chance to make a new extent cache
8. write data sequentially again which creates another big extent cache.
...
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Mon, 18 Nov 2013 08:16:17 +0000 (17:16 +0900)]
f2fs: use sbi->write_mutex for write bios
This patch removes an unnecessary semaphore (i.e., sbi->bio_sem).
There is no reason to use the semaphore when f2fs submits read and write IOs.
Instead, let's use a write mutex and cover the sbi->bio[] by the lock.
Change log from v1:
o split write_mutex suggested by Chao Yu
Chao described,
"All DATA/NODE/META bio buffers in superblock is protected by
'sbi->write_mutex', but each bio buffer area is independent, So we
should split write_mutex to three for DATA/NODE/META."
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Tue, 12 Nov 2013 07:55:17 +0000 (16:55 +0900)]
f2fs: introduce f2fs_issue_discard() to clean up
Change log from v1:
o fix 32bit drops reported by Dan Carpenter
This patch adds f2fs_issue_discard() to clean up blkdev_issue_discard() flows.
Dan carpenter reported:
"block_t is a 32 bit type and sector_t is a 64 bit type. The upper 32
bits of the sector_t are not used because the shift will wrap."
Bug-Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Tue, 12 Nov 2013 06:00:38 +0000 (15:00 +0900)]
f2fs: add a sysfs entry to control max_discards
If frequent small discards are issued to the device, the performance would
be degraded significantly.
So, this patch adds a sysfs entry to control the number of discards to be
issued during a checkpoint procedure.
By default, f2fs does not issue any small discards, which means max_discards
is zero.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Tue, 12 Nov 2013 05:49:56 +0000 (14:49 +0900)]
f2fs: add key functions for small discards
This patch adds key functions to activate the small discard feature.
Note that this procedure is conducted during the checkpoint only.
In flush_sit_entries(), when a new dirty sit entry is flushed, f2fs calls
add_discard_addrs() which searches candidates to be discarded.
The candidates should be marked *invalidated* and also previous checkpoint
recognizes it as *valid*.
At the end of a checkpoint procedure, f2fs throws discards based on the
discard entry list.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Fri, 15 Nov 2013 04:55:58 +0000 (13:55 +0900)]
f2fs: add a slab cache entry for small discards
This patch adds a slab cache entry for small discards.
Each entry consists of:
struct discard_entry {
struct list_head list; /* list head */
block_t blkaddr; /* block address to be discarded */
int len; /* # of consecutive blocks of the discard */
};
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Linus Torvalds [Sun, 22 Dec 2013 19:13:02 +0000 (11:13 -0800)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Much smaller batch of fixes this week.
Biggest one is a revert of an OMAP display change that removed some
non-DT pinmux code that was still needed for 3.13 to get DSI displays
to work.
There's also a fix that resolves some misdescribed GPIO controller
resources on shmobile. The rest are mostly smaller fixes, a couple of
MAINTAINERS updates, etc"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
Revert "ARM: OMAP2+: Remove legacy mux code for display.c"
MAINTAINERS: Add keystone clock drivers
MAINTAINERS: Add keystone git tree information
ARM: s3c64xx: dt: Fix boot failure due to double clock initialization
ARM: shmobile: r8a7790: Fix GPIO resources in DTS
irqchip: renesas-intc-irqpin: Fix register bitfield shift calculation
ARM: shmobile: lager: phy fixup needs CONFIG_PHYLIB
Linus Torvalds [Sun, 22 Dec 2013 19:11:57 +0000 (11:11 -0800)]
Merge tag 'firewire-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixlet from Stefan Richter:
"A one-liner to reenable WRITE SAME over SBP-2 like in v3.8...v3.12.
Buggy targets which could malfunction when being subjected to this
command are already sufficiently protected by a scsi_level check in sd
+ SCSI core"
* tag 'firewire-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: sbp2: bring back WRITE SAME support
Pull SCSI target fixes from Nicholas Bellinger:
"Mostly minor items this time around, the most notable being a FILEIO
backend change to enforce hw_max_sectors based upon the current
block_size to address a bug where large sized I/Os (> 1M) where being
rejected"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure
target: Remove extra percpu_ref_init
target/file: Update hw_max_sectors based on current block_size
iser-target: Move INIT_WORK setup into isert_create_device_ib_res
iscsi-target: Fix incorrect np->np_thread NULL assignment
qla2xxx: Fix schedule_delayed_work() for target timeout calculations
iser-target: fix error return code in isert_create_device_ib_res()
iscsi-target: Fix-up all zero data-length CDBs with R/W_BIT set
target: Remove write-only stats fields and lock from struct se_node_acl
iscsi-target: return -EINVAL on oversized configfs parameter
Linus Torvalds [Sun, 22 Dec 2013 19:03:49 +0000 (11:03 -0800)]
Merge git://git.kvack.org/~bcrl/aio-next
Pull AIO leak fixes from Ben LaHaise:
"I've put these two patches plus Linus's change through a round of
tests, and it passes millions of iterations of the aio numa
migratepage test, as well as a number of repetitions of a few simple
read and write tests.
The first patch fixes the memory leak Kent introduced, while the
second patch makes aio_migratepage() much more paranoid and robust"
* git://git.kvack.org/~bcrl/aio-next:
aio/migratepages: make aio migrate pages sane
aio: fix kioctx leak introduced by "aio: Fix a trinity splat"
Linus Torvalds [Thu, 19 Dec 2013 20:11:12 +0000 (05:11 +0900)]
aio: clean up and fix aio_setup_ring page mapping
Since commit 36bc08cc01709 ("fs/aio: Add support to aio ring pages
migration") the aio ring setup code has used a special per-ring backing
inode for the page allocations, rather than just using random anonymous
pages.
However, rather than remembering the pages as it allocated them, it
would allocate the pages, insert them into the file mapping (dirty, so
that they couldn't be free'd), and then forget about them. And then to
look them up again, it would mmap the mapping, and then use
"get_user_pages()" to get back an array of the pages we just created.
Now, not only is that incredibly inefficient, it also leaked all the
pages if the mmap failed (which could happen due to excessive number of
mappings, for example).
So clean it all up, making it much more straightforward. Also remove
some left-overs of the previous (broken) mm_populate() usage that was
removed in commit d6c355c7dabc ("aio: fix race in ring buffer page
lookup introduced by page migration support") but left the pointless and
now misleading MAP_POPULATE flag around.
Tested-and-acked-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Benjamin LaHaise [Sat, 21 Dec 2013 22:56:08 +0000 (17:56 -0500)]
aio/migratepages: make aio migrate pages sane
The arbitrary restriction on page counts offered by the core
migrate_page_move_mapping() code results in rather suspicious looking
fiddling with page reference counts in the aio_migratepage() operation.
To fix this, make migrate_page_move_mapping() take an extra_count parameter
that allows aio to tell the code about its own reference count on the page
being migrated.
While cleaning up aio_migratepage(), make it validate that the old page
being passed in is actually what aio_migratepage() expects to prevent
misbehaviour in the case of races.
Benjamin LaHaise [Sat, 21 Dec 2013 20:49:28 +0000 (15:49 -0500)]
aio: fix kioctx leak introduced by "aio: Fix a trinity splat"
e34ecee2ae791df674dfb466ce40692ca6218e43 reworked the percpu reference
counting to correct a bug trinity found. Unfortunately, the change lead
to kioctxes being leaked because there was no final reference count to
put. Add that reference count back in to fix things.
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Cc: stable@vger.kernel.org
Linus Torvalds [Sat, 21 Dec 2013 00:52:45 +0000 (16:52 -0800)]
Don't set the INITRD_COMPRESS environment variable automatically
Commit 1bf49dd4be0b ("./Makefile: export initial ramdisk compression
config option") started setting the INITRD_COMPRESS environment variable
depending on which decompression models the kernel had available.
That is completely broken.
For example, we by default have CONFIG_RD_LZ4 enabled, and are able to
decompress such an initrd, but the user tools to *create* such an initrd
may not be availble. So trying to tell dracut to generate an
lz4-compressed image just because we can decode such an image is
completely inappropriate.
Cc: J P <ppandit@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 20 Dec 2013 23:48:45 +0000 (15:48 -0800)]
Merge tag 'xfs-for-linus-v3.13-rc5' of git://oss.sgi.com/xfs/xfs
Pull xfs bugfixes from Ben Myers:
"This contains fixes for some asserts
related to project quotas, a memory leak, a hang when disabling group or
project quotas before disabling user quotas, Dave's email address, several
fixes for the alignment of file allocation to stripe unit/width geometry, a
fix for an assertion with xfs_zero_remaining_bytes, and the behavior of
metadata writeback in the face of IO errors.
Details:
- fix memory leak in xfs_dir2_node_removename
- fix quota assertion in xfs_setattr_size
- fix quota assertions in xfs_qm_vop_create_dqattach
- fix for hang when disabling group and project quotas before
disabling user quotas
- fix Dave Chinner's email address in MAINTAINERS
- fix for file allocation alignment
- fix for assertion in xfs_buf_stale by removing xfsbdstrat
- fix for alignment with swalloc mount option
- fix for "retry forever" semantics on IO errors"
* tag 'xfs-for-linus-v3.13-rc5' of git://oss.sgi.com/xfs/xfs:
xfs: abort metadata writeback on permanent errors
xfs: swalloc doesn't align allocations properly
xfs: remove xfsbdstrat error
xfs: align initial file allocations correctly
MAINTAINERS: fix incorrect mail address of XFS maintainer
xfs: fix infinite loop by detaching the group/project hints from user dquot
xfs: fix assertion failure at xfs_setattr_nonsize
xfs: fix false assertion at xfs_qm_vop_create_dqattach
xfs: fix memory leak in xfs_dir2_node_removename
Olof Johansson [Fri, 20 Dec 2013 22:28:05 +0000 (14:28 -0800)]
mm: fix build of split ptlock code
Commit 597d795a2a78 ('mm: do not allocate page->ptl dynamically, if
spinlock_t fits to long') restructures some allocators that are compiled
even if USE_SPLIT_PTLOCKS arn't used. It results in compilation
failure:
mm/memory.c:4282:6: error: 'struct page' has no member named 'ptl'
mm/memory.c:4288:12: error: 'struct page' has no member named 'ptl'
Add in the missing ifdef.
Fixes: 597d795a2a78 ('mm: do not allocate page->ptl dynamically, if spinlock_t fits to long') Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 20 Dec 2013 21:50:42 +0000 (13:50 -0800)]
Merge tag 'arc-fixes-for-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fix from Vineet Gupta:
"Fix busted syscall table due to unistd header inclusion issue"
* tag 'arc-fixes-for-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: Allow conditional multiple inclusion of uapi/asm/unistd.h
Luck, Tony [Wed, 18 Dec 2013 23:17:10 +0000 (15:17 -0800)]
pstore: Don't allow high traffic options on fragile devices
Some pstore backing devices use on board flash as persistent
storage. These have limited numbers of write cycles so it
is a poor idea to use them from high frequency operations.
Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 20 Dec 2013 20:27:41 +0000 (12:27 -0800)]
Merge tag 'dmaengine-fixes-3.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine
Pull dmaengine fixes from Dan Williams:
- deprecation of net_dma to be removed in 3.14
- crash regression fix in pl330 from the dmaengine_unmap rework
- crash regression fix for any channel running raid ops without
CONFIG_ASYNC_TX_DMA from dmaengine_unmap
- memory leak regression in mv_xor from dmaengine_unmap
- build warning regressions in mv_xor, fsldma, ppc4xx, txx9, and
at_hdmac from dmaengine_unmap
- sleep in atomic regression in dma_async_memcpy_pg_to_pg
- new fix in mv_xor for handling channel initialization failures
* tag 'dmaengine-fixes-3.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine:
net_dma: mark broken
dma: pl330: ensure DMA descriptors are zero-initialised
dmaengine: fix sleep in atomic
dmaengine: mv_xor: fix oops when channels fail to initialise
dma: mv_xor: Use dmaengine_unmap_data for the self-tests
dmaengine: fix enable for high order unmap pools
dma: fix build warnings in txx9
dmatest: fix build warning on mips
dma: fix fsldma build warnings
dma: fix build warnings in ppc4xx
dmaengine: at_hdmac: remove unused function
dma: mv_xor: remove mv_desc_get_dest_addr()
mm: do not allocate page->ptl dynamically, if spinlock_t fits to long
In struct page we have enough space to fit long-size page->ptl there,
but we use dynamically-allocated page->ptl if size(spinlock_t) is larger
than sizeof(int).
It hurts 64-bit architectures with CONFIG_GENERIC_LOCKBREAK, where
sizeof(spinlock_t) == 8, but it easily fits into struct page.
Johannes Weiner [Fri, 20 Dec 2013 14:54:12 +0000 (14:54 +0000)]
mm: page_alloc: revert NUMA aspect of fair allocation policy
Commit 81c0a2bb515f ("mm: page_alloc: fair zone allocator policy") meant
to bring aging fairness among zones in system, but it was overzealous
and badly regressed basic workloads on NUMA systems.
Due to the way kswapd and page allocator interacts, we still want to
make sure that all zones in any given node are used equally for all
allocations to maximize memory utilization and prevent thrashing on the
highest zone in the node.
While the same principle applies to NUMA nodes - memory utilization is
obviously improved by spreading allocations throughout all nodes -
remote references can be costly and so many workloads prefer locality
over memory utilization. The original change assumed that
zone_reclaim_mode would be a good enough predictor for that, but it
turned out to be as indicative as a coin flip.
Revert the NUMA aspect of the fairness until we can find a proper way to
make it configurable and agree on a sane default.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: <stable@kernel.org> # 3.12 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Fri, 20 Dec 2013 14:54:11 +0000 (14:54 +0000)]
Revert "mm: page_alloc: exclude unreclaimable allocations from zone fairness policy"
This reverts commit 73f038b863df. The NUMA behaviour of this patch is
less than ideal. An alternative approch is to interleave allocations
only within local zones which is implemented in the next patch.
mm: Fix NULL pointer dereference in madvise(MADV_WILLNEED) support
Sasha Levin found a NULL pointer dereference that is due to a missing
page table lock, which in turn is due to the pmd entry in question being
a transparent huge-table entry.
The code - introduced in commit 1998cc048901 ("mm: make
madvise(MADV_WILLNEED) support swap file prefetch") - correctly checks
for this situation using pmd_none_or_trans_huge_or_clear_bad(), but it
turns out that that function doesn't work correctly.
pmd_none_or_trans_huge_or_clear_bad() expected that pmd_bad() would
trigger if the transparent hugepage bit was set, but it doesn't do that
if pmd_numa() is also set. Note that the NUMA bit only gets set on real
NUMA machines, so people trying to reproduce this on most normal
development systems would never actually trigger this.
Fix it by removing the very subtle (and subtly incorrect) expectation,
and instead just checking pmd_trans_huge() explicitly.
Reported-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Andrea Arcangeli <aarcange@redhat.com>
[ Additionally remove the now stale test for pmd_trans_huge() inside the
pmd_bad() case - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This problem has been present since GPIOs were added to the r8a7790 SoC
by f98e10c88aa95bf7 ("ARM: shmobile: r8a7790: Add GPIO controller
devices to device tree") in v3.12-rc1.
This bug has been present since the renesas-intc-irqpin driver was
introduced by 443580486e3b9657 ("irqchip: Renesas INTC External IRQ pin
driver") in v3.10-rc1
* Lager board
- Do not build the phy fixup unless CONFIG_PHYLIB is enabled
Paolo Bonzini [Fri, 20 Dec 2013 18:13:58 +0000 (19:13 +0100)]
Merge tag 'signed-for-3.13' of git://github.com/agraf/linux-2.6 into kvm-master
Patch queue for 3.13 - 2013-12-18
This fixes some grave issues we've only found after 3.13-rc1:
- Make the modularized HV/PR book3s kvm work well as modules
- Fix some race conditions
- Fix compilation with certain compilers (booke)
- Fix THP for book3s_hv
- Fix preemption for book3s_pr
Alexander Graf (4):
KVM: PPC: Book3S: PR: Don't clobber our exit handler id
KVM: PPC: Book3S: PR: Export kvmppc_copy_to|from_svcpu
KVM: PPC: Book3S: PR: Make svcpu -> vcpu store preempt savvy
KVM: PPC: Book3S: PR: Enable interrupts earlier
Linus Torvalds [Fri, 20 Dec 2013 17:34:54 +0000 (09:34 -0800)]
Merge tag 'stable/for-linus-3.13-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen bugfixes from Konrad Rzeszutek Wilk:
- Fix balloon driver for auto-translate guests (PVHVM, ARM) to not use
scratch pages.
- Fix block API header for ARM32 and ARM64 to have proper layout
- On ARM when mapping guests, stick on PTE_SPECIAL
- When using SWIOTLB under ARM, don't call swiotlb functions twice
- When unmapping guests memory and if we fail, don't return pages which
failed to be unmapped.
- Grant driver was using the wrong address on ARM.
* tag 'stable/for-linus-3.13-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: Seperate the auto-translate logic properly (v2)
xen/block: Correctly define structures in public headers on ARM32 and ARM64
arm: xen: foreign mapping PTEs are special.
xen/arm64: do not call the swiotlb functions twice
xen: privcmd: do not return pages which we have failed to unmap
XEN: Grant table address, xen_hvm_resume_frames, is a phys_addr not a pfn
Linus Torvalds [Fri, 20 Dec 2013 17:32:30 +0000 (09:32 -0800)]
Merge tag 'trace-fixes-v3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fix from Steven Rostedt:
"This fixes a long standing bug in the ftrace profiler. The problem is
that the profiler only initializes the online CPUs, and not possible
CPUs. This causes issues if the user takes CPUs online or offline
while the profiler is running.
If we online a CPU after starting the profiler, we lose all the trace
information on the CPU going online.
If we offline a CPU after running a test and start a new test, it will
not clear the old data from that CPU.
This bug causes incorrect data to be reported to the user if they
online or offline CPUs during the profiling"
* tag 'trace-fixes-v3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Initialize the ftrace profiler for each possible cpu
Kevin Hilman [Fri, 20 Dec 2013 16:30:50 +0000 (08:30 -0800)]
Merge tag 'omap-for-v3.13/display-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
I accidentally removed some mux code for omap4 that I thought was
dead code as omap4 has been booting with device tree only since
v3.10. Turns out I also removed some display related mux code,
so let's revert that except for the dead code parts.
* tag 'omap-for-v3.13/display-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (439 commits)
Revert "ARM: OMAP2+: Remove legacy mux code for display.c"
+Linux 3.13-rc4
Kevin Hilman [Thu, 19 Dec 2013 23:12:23 +0000 (15:12 -0800)]
Merge tag 'keystone/maintainer-file' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into fixes
From Santosh Shilimkar:
Couple of updates to MAINTAINERS file for Keystone
- Add git tree information
- Add clock drivers entry
* tag 'keystone/maintainer-file' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
MAINTAINERS: Add keystone clock drivers
MAINTAINERS: Add keystone git tree information
qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure
This patch fixes a possible scsi_host reference leak in qlt_lport_register(),
when a non zero return from the passed (*callback) does not call drop the
local reference via scsi_host_put() before returning.
This currently does not effect existing tcm_qla2xxx code as the passed callback
will never fail, but fix this up regardless for future code.
Cc: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Will Deacon [Tue, 17 Dec 2013 17:09:08 +0000 (17:09 +0000)]
arm64: ptrace: avoid using HW_BREAKPOINT_EMPTY for disabled events
Commit 8f34a1da35ae ("arm64: ptrace: use HW_BREAKPOINT_EMPTY type for
disabled breakpoints") fixed an issue with GDB trying to zero breakpoint
control registers. The problem there is that the arch hw_breakpoint code
will attempt to create a (disabled), execute breakpoint of length 0.
This will fail validation and report unexpected failure to GDB. To avoid
this, we treated disabled breakpoints as HW_BREAKPOINT_EMPTY, but that
seems to have broken with recent kernels, causing watchpoints to be
treated as TYPE_INST in the core code and returning ENOSPC for any
further breakpoints.
This patch fixes the problem by prioritising the `enable' field of the
breakpoint: if it is cleared, we simply update the perf_event_attr to
indicate that the thing is disabled and don't bother changing either the
type or the length. This reinforces the behaviour that the breakpoint
control register is essentially read-only apart from the enable bit
when disabling a breakpoint.
Cc: <stable@vger.kernel.org> Reported-by: Aaron Liu <liucy214@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Thu, 19 Dec 2013 17:10:46 +0000 (09:10 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"An ABI documentation fix, and a mixed-PMU perf-info-corruption fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Document the new transaction sample type
perf: Disable all pmus on unthrottling and rescheduling
Linus Torvalds [Thu, 19 Dec 2013 17:10:10 +0000 (09:10 -0800)]
Merge tag 'sound-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"We have a bit more changes than usual in ASoC here, as it was slipped
from the previous update. There are one minr ASoC PCM code fix and
ASoC dmaengine fix, in addition of a collection of small ASoC driver
fixes. The rest are a couple of HD-audio stable fixups, and a
long-standing fix for the paused stream handling.
So, all commits look not scary (and hopefully won't give you
disastrous holiday season)"
* tag 'sound-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add Dell headset detection quirk for one more laptop model
ASoC: wm8904: fix DSP mode B configuration
ASoC: wm_adsp: Add small delay while polling DSP RAM start
ALSA: Add SNDRV_PCM_STATE_PAUSED case in wait_for_avail function
ASoC: kirkwood: Fix the CPU DAI rates
ASoC: wm5110: Correct HPOUT3 DAPM route typo
ALSA: hda - Add Dell headset detection quirk for three laptop models
ALSA: hda - Add enable_msi=0 workaround for four HP machines
ASoC: don't leak on error in snd_dmaengine_pcm_register
ASoC: fsl: imx-wm8962: Don't update bias_level in machine driver
ASoC: tegra: fix uninitialized variables in set_fmt
ASoC: wm8962: Enable SYSCLK provisonally before fetching generated DSPCLK_DIV
ASoC: sam9x5_wm8731: change to work in DSP A mode
ASoC: atmel_ssc_dai: add dai trigger ops
ASoC: soc-pcm: Use valid condition for snd_soc_dai_digital_mute() in hw_free()
Vineet Gupta [Thu, 19 Dec 2013 13:25:58 +0000 (18:55 +0530)]
ARC: Allow conditional multiple inclusion of uapi/asm/unistd.h
Commit 97bc386fc12d "ARC: Add guard macro to uapi/asm/unistd.h"
inhibited multiple inclusion of ARCH unistd.h. This however hosed the system
since Generic syscall table generator relies on it being included twice,
and in lack-of an empty table was emitted by C preprocessor.
Fix that by allowing one exception to rule for the special case (just
like Xtensa)
Suggested-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
projects / karo-tx-linux.git / log