In case there are multiple notify chains for the same clocks (because they
were registered by different users), we need to propagate potential failure
of any single one of them to the caller. Otherwise we eg risk violating the
V/f curve when a notifier is used for DVFS.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
For validation purposes, it's often useful to be able to retrieve the list
of possible parents in userspace. Add a debugfs file for every clock which
has more than 1 possible parent.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Jon Mayo <jmayo@nvidia.com>
[sboyd@codeaurora.org: Remove useless cast from void and extra
newline] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
clk: imx: correct uart4_serial clock name in driver for i.MX6UL
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Stephen Boyd [Fri, 7 Apr 2017 19:21:33 +0000 (12:21 -0700)]
clk: zte: Mark pll config tables as const
These should be const.
Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Shawn Guo [Tue, 21 Mar 2017 08:38:23 +0000 (16:38 +0800)]
clk: zte: add pll_vga clock for zx296718
It adds zx296718 pll_vga clock for VGA support, so that VGA device can
get required pixel rate from clock driver for different display mode.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Shawn Guo [Tue, 21 Mar 2017 08:38:22 +0000 (16:38 +0800)]
clk: zte: pd_bit is not 0 on zx296718
The bit 0 of PLL_CFG0 register is not powerdown on zx296718, but part of
of postdiv2 field. The consequence is that functions like hw_to_idx()
and zx_pll_enable() will end up tampering the postdiv2 of the PLL.
Let's fix it by defining pd_bit 0xff which is obviously invalid for a
bit position and having PLL driver check the validity before operating
on the bit.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Shawn Guo [Tue, 21 Mar 2017 08:38:21 +0000 (16:38 +0800)]
clk: zte: set CLK_SET_RATE_PARENT for a few zx296718 clocks
To support VOU VGA display driver with different modes, we need to set
flag for a few clocks, so that clk_set_rate() call in VOU driver can get
VGA device desired pixel rate.
While at it, the divider between pll_vga and clk_vga gets corrected, as
it's 1:1 instead of 1:2.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
clk: imx: clk-imx6ul: The i.mx6ul has no aips_tz3 clock
The clock was mapped on CG15 (gpio2_clocks) in the CCRG0 register.
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Ray Jui [Wed, 5 Apr 2017 19:53:37 +0000 (12:53 -0700)]
clk: iproc: Remove redundant check
Remove the redundant check of 'rate' in the if statement of the
'pll_set_rate' function
Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Fixes: 5fe225c105fd ("clk: iproc: add initial common clock support") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Merge tag 'v4.12-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull rockchip clk driver updates from Heiko Stuebner:
General rockchip clock changes for 4.12. Contains some new clock-ids
as well as fixups of the clock-ids on rk3368 timers, which were unused
and completely wrong (more and differently named timers).
Also there is one new clock on rk3328 using the muxgrf type, a fix for
pll enablement which should wait for the pll to lock before continuing,
some more critical clocks and the rename of the rk1108 to rv1108, as the
soc seems to have been using a preliminary name before its actual release.
The plan is to have the driver changes (pinctrl, clk) go through the
respective maintainer trees and once everything landed in mainline do
the rename of the devicetree files. With the dts-include change in the
clock rename, we also keep everything compiling and thus bisectability.
* tag 'v4.12-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: add pll_wait_lock for pll_enable
clk: rockchip: rename RK1108 to RV1108
dt-bindings: rk1108-cru: rename RK1108 to RV1108
clk: rockchip: mark some rk3368 core-clks as critical
clk: rockchip: export SCLK_TIMERXX id for timers on rk3368
clk: rockchip: describe clk_gmac using the new muxgrf type on rk3328
clk: rockchip: add clock ids for timer10-15 of RK3368 SoCs
clk: rockchip: fix up rk3368 timer-ids
clk: rockchip: add rk3328 clk_mac2io_ext ID
clk: rockchip: Set "ignore unused" for PMU M0 clocks on rk3399
Merge tag 'clk-renesas-for-v4.12-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next
Pull Renesas clk driver updates from Geert Uytterhoeven:
- Add support for the Clock Pulse Generator / Module Standby and
Software Reset module on revision ES2.0 of the R-Car H3 SoC, which
differs from ES1.x in some areas.
- Add IMR clocks for R-Car H3 and M3-W,
- Add workaround for PLL0/2/4 errata on R-Car H3 ES1.0,
- Small fixes and cleanups.
* tag 'clk-renesas-for-v4.12-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: rcar-gen3-cpg: Add support for RCLK on R-Car H3 ES2.0
clk: renesas: r8a7795: Add support for R-Car H3 ES2.0
clk: renesas: Add r8a7795 ES2.0 CPG Core Clock Definitions
clk: renesas: cpg-mssr: Add support for fixing up clock tables
clk: renesas: rcar-gen3: Add workaround for PLL0/2/4 errata on H3 ES1.0
clk: renesas: rcar-gen3-cpg: Pass mode pins to rcar_gen3_cpg_init()
clk: renesas: r8a7796: Reformat core clock table
clk: renesas: r8a7795: Reformat core clock table
clk: renesas: r8a7796: Correct name of watchdog clock
clk: renesas: r8a7795: Correct name of watchdog clock
clk: renesas: r8a7795: Correct parent clock and sort order for Audio DMACs
clk: renesas: r8a7796: Add IMR clocks
clk: renesas: r8a7795: Add IMR clocks
Stephen Boyd [Tue, 4 Apr 2017 22:33:18 +0000 (15:33 -0700)]
Merge branch 'for-4.12-ti-clk-cleanups' of https://github.com/t-kristo/linux-pm into clk-next
* 'for-4.12-ti-clk-cleanups' of https://github.com/t-kristo/linux-pm:
clk: ti: convert to use proper register definition for all accesses
clk: ti: dpll44xx: fix clksel register initialization
clk: ti: gate: export gate_clk_ops locally
clk: ti: divider: add driver internal API for parsing divider data
clk: ti: divider: convert TI divider clock to use its own data representation
clk: ti: mux: convert TI mux clock to use its internal data representation
clk: ti: drop unnecessary MEMMAP_ADDRESSING flag
clk: ti: omap4: cleanup unnecessary clock aliases
clk: ti: enforce const types on string arrays
clk: ti: move omap2_init_clk_clkdm under TI clock driver
clk: ti: add clkdm_lookup to the exported functions
clk: ti: use automatic clock alias generation framework
clk: ti: add API for creating aliases automatically for simple clock types
clk: ti: add support for automatic clock alias generation
clk: ti: remove un-used definitions from public clk_hw_omap struct
Leo Yan [Sat, 25 Mar 2017 18:23:15 +0000 (02:23 +0800)]
clk: hi6220: add debug APB clock
The debug APB clock is absent in hi6220 driver, so this patch is to add
support for it.
Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Neil Armstrong [Wed, 22 Mar 2017 10:32:25 +0000 (11:32 +0100)]
clk: meson-gxbb: Add GXL/GXM GP0 Variant
The clock tree in the Amlogic GXBB and GXL/GXM SoCs is shared, but the GXL/GXM
SoCs embeds a different GP0 PLL, and needs different parameters with a vendor
provided reduced rate table.
This patch adds the GXL GP0 variant, and adds a GXL DT compatible in order
to use the GXL GP0 PLL instead of the GXBB specific one.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1490178747-14837-4-git-send-email-narmstrong@baylibre.com
Neil Armstrong [Wed, 22 Mar 2017 10:32:24 +0000 (11:32 +0100)]
clk: meson-gxbb: Add GP0 PLL init parameters
Tha Amlogic GXBB SoC GP0 PLL needs some vendor provided parameters to be
initializated in the the GP0 control registers before configuring the rate
with the rate table provided parameters.
GXBB GP0 PLL tweaks are also selected to respect the vendor init procedure.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1490178747-14837-3-git-send-email-narmstrong@baylibre.com
Neil Armstrong [Wed, 22 Mar 2017 10:32:23 +0000 (11:32 +0100)]
clk: meson: Add support for parameters for specific PLLs
In recent Amlogic GXBB, GXL and GXM SoCs, the GP0 PLL needs some specific
parameters in order to initialize and lock correctly.
This patch adds an optional PARAM table used to initialize the PLL to a
default value with it's parameters in order to achieve to desired frequency.
The GP0 PLL in GXBB, GXL/GXM also needs some tweaks in the initialization
steps, and these are exposed along the PARAM table.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1490178747-14837-2-git-send-email-narmstrong@baylibre.com
Neil Armstrong [Wed, 22 Mar 2017 10:18:54 +0000 (11:18 +0100)]
clk: meson-gxbb: Add MALI clocks
The Mali is clocked by two identical clock paths behind a glitch free mux
to safely change frequency while running.
The two "mali_0" and "mali_1" clocks are composed of a mux, divider and gate.
Expose these two clocks trees using generic clocks.
Finally the glitch free mux is added as "mali" clock.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1490177935-9646-3-git-send-email-narmstrong@baylibre.com
Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1490178747-14837-6-git-send-email-narmstrong@baylibre.com
Neil Armstrong [Wed, 22 Mar 2017 10:32:26 +0000 (11:32 +0100)]
clk: meson-gxbb: Expose GP0 dt-bindings clock id
This patch exposes the GP0 PLL clock id in the dt bindings.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1490178747-14837-5-git-send-email-narmstrong@baylibre.com
Neil Armstrong [Wed, 22 Mar 2017 10:18:53 +0000 (11:18 +0100)]
clk: meson-gxbb: Add MALI clock IDS
Add missing MALI clock IDs and expose the muxes and gates in the dt-bindings.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1490177935-9646-2-git-send-email-narmstrong@baylibre.com
Jon Hunter [Mon, 27 Mar 2017 11:01:05 +0000 (12:01 +0100)]
clk: tegra: Don't reset PLL-CX if it is already enabled
Commit 8dce89a1c2cf ("clk: tegra: Don't warn for PLL defaults
unnecessarily") changed the tegra210_pllcx_set_defaults() function
causing the PLL to always be reset regardless of whether it is in-use.
This function was changed so that resetting of the PLL will only be
skipped if the PLL is enabled AND 'pllcx->params->defaults_set' is not
true. However, the 'pllcx->params->defaults_set' is always true and
hence, the PLL is now always reset. This causes the boot to fail on the
Tegra210 Smaug where the PLL is already enabled and in-use. Fix this by
only resetting the PLL if not in-use and only printing the warning that
the defaults are not set after we have checked the default settings.
Fixes: 8dce89a1c2cf ("clk: tegra: Don't warn for PLL defaults unnecessarily") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Alex Frid [Wed, 22 Mar 2017 13:38:19 +0000 (15:38 +0200)]
clk: tegra: Propagate clk_out_x rate to parent
Given that externx can only be used as a parent for clk_out_x, it makes
sense to propagate requests to make clk_out_x easier to handle.
Signed-off-by: Alex Frid <afrid@nvidia.com> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
clk: renesas: r8a7795: Add support for R-Car H3 ES2.0
The Clock Pulse Generator / Module Standby and Software Reset module in
R-Car H3 ES2.0 differs from ES1.x in the following areas:
- More core clocks (S0D2, S0D3, S0D6, S0D8, S0D12),
- Different parent clocks for AUDMAC, EtherAVB, FCP, FDP, IMR,
SYS-DMAC, VIN, VSPB, VSPI,
- Removal of modules CSI21, FCPCI, FCPF2, FCPVD3, FCPVI2, FDP1-2,
USB3-IF1, VSPD3, VSPI2,
- Addition of modules EHCI3, HS-USB-IF3, USB-DMAC3-0, USB-DMAC3-1.
The goal is twofold:
1. Support both the ES1.x and ES2.0 SoC revisions in a single binary
for now,
2. Make it clear which code supports ES1.x, so it can easily be
identified and removed later, when production SoCs are deemed
ubiquitous.
This is achieved by:
- Updating the clock tables for the latest revision (ES2.0), but not
removing clocks that only exist on earlier revisions (ES1.x),
- Detecting the SoC revision at runtime using the new soc_device_match()
API, and fixing up the clocks tables to match the actual SoC
revision, by:
- NULLifying core and module clocks of modules that do not exist,
- Reparenting module clocks that have a different parent on ES1.x.
Based on R-Car Gen3 Hardware User's Manual rev. 0.53E.
Add all R-Car H3 ES2.0 Clock Pulse Generator Core Clock Outputs, as
listed in Table 8.2a ("List of Clocks [R-Car H3]") of the R-Car Gen3
Hardware User's Manual rev. 0.53E.
clk: renesas: cpg-mssr: Add support for fixing up clock tables
The same SoC may have different clocks and/or module clock parents,
depending on SoC revision. One option is to use different sets of clock
tables for each SoC revision. However, if the differences are small, it
is much more space-efficient to have a single set of clock tables, and
fix those up at runtime instead.
Hence provide three helpers:
- Two helpers to NULLify core and module clocks that do not exist on
some revisions (NULLified clocks are skipped during the registration
phase),
- One helper to reparent module clocks that have different clock
parents.
Jerome Brunet [Thu, 9 Mar 2017 10:41:50 +0000 (11:41 +0100)]
clk: meson: mpll: add rw operation
This patch adds new callbacks to the meson-mpll driver to control
and set the pll rate. For this, we also need to add the enable bit and
sdm enable bit. The corresponding parameters are added to mpll data
structure.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/20170309104154.28295-6-jbrunet@baylibre.com
Jerome Brunet [Thu, 9 Mar 2017 10:41:49 +0000 (11:41 +0100)]
clk: gxbb: put dividers and muxes in tables
Until now, there was only 2 dividers and 2 muxes declared for the gxbb
platform. With the ongoing work on various subsystem, including audio,
this is about to change. Use the same approach as gates for dividers and
muxes, putting them in tables to fix the register address at runtime.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/20170309104154.28295-5-jbrunet@baylibre.com
Jerome Brunet [Thu, 9 Mar 2017 10:41:48 +0000 (11:41 +0100)]
clk: meson8b: put dividers and muxes in tables
Until now, there was only 1 divider and 1 mux declared for the meson8b
platform. With the ongoing work on various system, including audio, this
is about to change. Use the same approach as gates for dividers and muxes,
putting them in tables to fix the register address at runtime.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/20170309104154.28295-4-jbrunet@baylibre.com
Stephen Boyd [Thu, 23 Mar 2017 23:08:46 +0000 (16:08 -0700)]
Merge tag 'sunxi-clk-fixes-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-fixes
Pull Allwinner clock fixes from Maxime Ripard:
A few fixes for a bunch of clocks on a few SoCs. The most important one is
probably one that fixes the NKMP clock frequency calculation and could end
up with clocking the CPU frequency to out of bounds rates.
* tag 'sunxi-clk-fixes-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
clk: sunxi-ng: fix recalc_rate formula of NKMP clocks
clk: sunxi-ng: Fix div/mult settings for osc12M on A64
clk: sunxi-ng: sun6i: Fix enable bit offset for hdmi-ddc module clock
clk: sunxi: ccu-sun5i needs nkmp
clk: sunxi-ng: mp: Adjust parent rate for pre-dividers
Andy Yan [Fri, 17 Mar 2017 17:18:38 +0000 (18:18 +0100)]
clk: rockchip: rename RK1108 to RV1108
Rockchip finally named the SOC as RV1108, so change it.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
[include rename in rk1108.dtsi to prevent compile errors] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
clk: renesas: rcar-gen3-cpg: Pass mode pins to rcar_gen3_cpg_init()
Pass the mode pin states from the SoC-specific CPG/MSSR driver to the
R-Car Gen3 CPG driver core, as their state will be needed to make some
core clock configuration decisions.
In normal operation pll_u is under hardware control and has a fixed rate
of 480MHz. Hardware will turn on pll_u on whenever any of the XUSB
powerdomains is on. From a software point of view we model this is if
pll_u is always on using a fixed rate clock. However the bootloader
might or might not have configured pll_u this way. So we will check the
current state of pll_u at boot and reconfigure it if required.
There are 3 possiblities at kernel boot:
1) pll_u is under hardware control: do nothing
2) pll_u is under hardware control and enabled: enable hardware control
3) pll_u is disabled: enable pll_u and enable hardware control
In all cases we also check if UTMIPLL is under hardware control at boot
and configure it for hardware control if that is not the case.
The same is done during SC7 resume.
Thanks to Joseph Lo <josephl@nvidia.com> for bug fixes.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Mikko Perttunen [Thu, 2 Mar 2017 14:16:16 +0000 (16:16 +0200)]
clk: tegra: Implement reset control reset
For completeness, also implement this reset framework API for Tegra.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Arto Merilainen <amerilainen@nvidia.com> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
clk: tegra: Fix disable unused for clocks sharing enable bit
In case 2 clocks share an enable bit and one of them is enabled by a
driver and the other one is not, CCF will think it's enabled because it
will only look at the HW state. Therefore it will disable the clock and
thus also disable the other clock which was enabled. Solve this by
reading the initial state of the enable bit and incrementing the
refcount if it's set.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a super clock type which implements both mux and divider. This is
used for aclk.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra210 has 3 inputs for Digital Microphones (DMICs). Provide the
required clocks for them.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
checkpatch now warns for const ** and expects const * const * to be used
instead. This means we have to update the prototypes and function
declarations to handle this change.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra210 has 3 DMIC inputs which can be clocked from the recovered clock
of several other audio inputs (eg. i2s0, i2s1, ...). To model this, we
add a 3 new clocks similar to the audio* clocks which handle the same
function for the I2S and SPDIF clocks.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
This clock is used to clock the HDMI CEC interface.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
When used as part of fractional ndiv calculations, the current range is
not enough because the denominator of the fraction is multiplied with m.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Return the actually achieved rate in cfg->output_rate rather than just
the requested rate. This is important to make clk_round_rate() return
the correct result.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
clk: tegra: Don't warn for PLL defaults unnecessarily
If the PLL is on, only warn if the defaults are not yet set. Otherwise
be silent.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
The parent for afi is actually mselect, not clk_m.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
The 2 ISP clocks (ispa and ispb) share a mux/divider control. So model
this as 1 mux/divider clock and child gate clocks.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
pll_a1 was using CLK_RST_CONTROLLER_PLLA1_MISC_0 for IDDQ control rather
than the correct register CLK_RST_CONTROLLER_PLLA1_MISC_1. Also add
pll_a1 to the set of clocks defined for Tegra210.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Tested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Icenowy Zheng [Fri, 17 Mar 2017 20:19:43 +0000 (04:19 +0800)]
clk: sunxi-ng: fix recalc_rate formula of NKMP clocks
In commit e66f81bbd746 ("clk: sunxi-ng: Implement factors offsets"), the
final formula of NKMP clocks' recalc_rate is refactored; however, the
refactored formula broke the calculation due to some C language operand
priority problem -- the priority of operand >> is lower than * and /,
makes the formula being parsed as "(parent_rate * n * k) >> (p / m)", but
it should be "(parent_rate * n * k >> p) / m".
Add the pair of parentheses to fix up this issue. This pair of
parentheses used to exist in the old formula.
Philipp Tomsich [Wed, 15 Mar 2017 11:23:58 +0000 (12:23 +0100)]
clk: sunxi-ng: Fix div/mult settings for osc12M on A64
The mult/div for osc12M was previously backwards (giving a 48M rate
for osc12M). Fix it.
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Elaine Zhang [Mon, 6 Feb 2017 02:50:35 +0000 (10:50 +0800)]
clk: rockchip: describe clk_gmac using the new muxgrf type on rk3328
With the newly introduced clk type for muxes in the grf we now can
describe some missing clocks, like the clk_gmac2io and clk_gmac2phy
that selects between clk_mac2io_src and gmac_clkin based on a bit
set in the general register files.
Elaine Zhang [Tue, 7 Mar 2017 11:05:15 +0000 (19:05 +0800)]
clk: rockchip: fix up rk3368 timer-ids
The timer-ids are wrong compared to the manual, probably due a simple
copy-paste mistake from the otherwise very similar rk3288. And there
are even more timers in the system than the ones wrongly listed here.
Timer-Ids were unused both in clock-driver as well as devicetree
till now, so fixing them won't break anything.
Tero Kristo [Thu, 9 Feb 2017 09:24:37 +0000 (11:24 +0200)]
clk: ti: convert to use proper register definition for all accesses
Currently, TI clock driver uses an encapsulated struct that is cast into
a void pointer to store all register addresses. This can be considered
as rather nasty hackery, and prevents from expanding the register
address field also. Instead, replace all the code to use proper struct
in place for this, which contains all the previously used data.
This patch is rather large as it is touching multiple files, but this
can't be split up as we need to avoid any boot breakage.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
clksel register pointer should be used for the DPLL-MX autoidle handling.
Currently this is not setup at all. Fix by adding proper handling for the
register.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
Tero Kristo [Thu, 9 Feb 2017 12:45:45 +0000 (14:45 +0200)]
clk: ti: divider: convert TI divider clock to use its own data representation
Instead of using the generic clock driver data struct, use one internal
for the TI clock driver itself. This allows modifying the register access
parts in subsequent patch.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
Tero Kristo [Thu, 9 Feb 2017 12:40:40 +0000 (14:40 +0200)]
clk: ti: mux: convert TI mux clock to use its internal data representation
Instead of using the generic clock driver data struct, use one internal
for the TI clock driver itself. This allows modifying the register access
parts in subsequent patch.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
Tero Kristo [Thu, 29 Sep 2016 09:05:00 +0000 (12:05 +0300)]
clk: ti: add API for creating aliases automatically for simple clock types
This API generates clock aliases automatically for simple clock types
(fixed-clock, fixed-factor-clock), so that we don't need to add the data
for these statically into tables. Shall be called from the SoC specific
clock init.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
Tero Kristo [Thu, 29 Sep 2016 09:00:57 +0000 (12:00 +0300)]
clk: ti: add support for automatic clock alias generation
Large portions of the OMAP framework still depend on the support of
having clock aliases in place, so add support functions for generating
these automatically.
Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
projects / karo-tx-linux.git / log