Hans Verkuil [Sat, 23 Jun 2012 10:47:14 +0000 (07:47 -0300)]
[media] saa7146: remove V4L2_FL_LOCK_ALL_FOPS
Add proper locking to the file operations, allowing for the removal
of the V4L2_FL_LOCK_ALL_FOPS flag.
I also removed some dead code in the form of the saa7146_devices list and
saa7146_devices_lock mutex: these were used once but that was a long time
ago.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The dvb-usb-v2 core doesn't know anything about CI. So, the
driver needs to handle it by hand. This patch stops CI just
before stopping URB's/RC, and restarts it before URB/RC start.
It should be noticed that suspend/resume is not yet working properly,
as the PM model requires the implementation of reset_resume:
dvb_usb_az6007 1-6:1.0: no reset_resume for driver dvb_usb_az6007?
But this is not implemented there at dvb-usb-v2 yet.
Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
[media] dvb-usb-v2: Don't ask user to select Cypress firmware module
The dvb-usb-v2 cypress firmware module is not optional, as drivers
won't work without it. So, instead of opening a menu for the user to
manually select, let the drivers that need it to select, hiding this
option from the Kconfig menu.
Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/m2m-deinterlace.c: In function ‘deinterlace_issue_dma’:
drivers/media/video/m2m-deinterlace.c:363:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘dma_addr_t’ [-Wformat]
drivers/media/video/m2m-deinterlace.c:363:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘dma_addr_t’ [-Wformat]
Cc: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Javier Martin [Thu, 26 Jul 2012 08:55:18 +0000 (05:55 -0300)]
[media] media: Add mem2mem deinterlacing driver
Some video decoders such as tvp5150 provide separate
video fields (V4L2_FIELD_SEQ_TB/BT). This driver uses
dmaengine to convert this format to V4L2_FIELD_INTERLACED_TB/BT
(weaving) or V4L2_FIELD_NONE (line doubling) so that the
image can be displayed or processed.
Of course there will be combing effect in the image but this
can be accepted for some low quality applications.
Currently only YUV420 and YUYV formats are supported but
it can be extended later.
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Javier Martin [Thu, 26 Jul 2012 08:53:35 +0000 (05:53 -0300)]
[media] media: coda: Add driver for Coda video codec
Coda is a range of video codecs from Chips&Media that
support H.264, H.263, MPEG4 and other video standards.
Currently only support for the codadx6 included in the
i.MX27 SoC is added. H.264 and MPEG4 video encoding
are the only supported capabilities by now.
[mchehab@redhat.com: Add missing include linux/of.h] Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Reviewed-by: Philipp Zabel<p.zabel@pengutronix.de> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Wed, 25 Jul 2012 00:21:04 +0000 (21:21 -0300)]
[media] af9015: remote controller fixes
1)
AF9015 remote controller query will fail rarely due to register
access failures and dvb_usb_v2 will stop rc polling when error
returned. Add logic to allow errors until two consecutive errors
occurs.
2)
Remote controller key map was not loaded in case of key map was set as
a device property. Fix it.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Thu, 5 Jul 2012 22:57:07 +0000 (19:57 -0300)]
[media] dvb_usb_v2: register device even no remote keymap defined
It failed to register device when remote keymap was not set.
Fix it to register device even keymap is NULL. In that case
just skip remote registration.
Driver should set RC_MAP_EMPTY to enable remote in case of
there is remote receiver but default keymap is unknown.
It is nice to have this debug, but as it generates very huge amount
of traffic, better to make it conditional. Use define macro to disable
it as I did not find out how to use dynamic debugs to dump variable
length buffers like that.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Tue, 19 Jun 2012 02:42:53 +0000 (23:42 -0300)]
[media] dvb_usb_v2: use identify_state() to resolve firmware name
Merge get_firmware_name() to identify_state().
It is wise to resolve firmware name in that routine as it does
decision wether or not to load firmware at all. It is one very
rarely needed callback less.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Tue, 19 Jun 2012 01:54:16 +0000 (22:54 -0300)]
[media] dvb_usb_v2: merge get_ts_config() to get_usb_stream_config()
Piggypag TS type callback to USB stream callback and change
callback name slightly to fit better.
Both of those are rather rare callback and has a relation. Transport
Stream, TS, is input stream and USB stream is output stream of
DVB USB bridge.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 17 Jun 2012 03:27:00 +0000 (00:27 -0300)]
[media] dvb_usb_v2: use lock to sync feed and frontend control
There was synchronization problem when streaming was stopped.
Frontend was ran down before stream which causes problems.
Use mutex to synchronization. Now it looks like that:
LOCK
start frontend
UNLOCK
LOCK
start streaming
[...]
stop streaming
UNLOCK
LOCK
stop frontend
UNLOCK
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sat, 16 Jun 2012 19:02:57 +0000 (16:02 -0300)]
[media] dvb_usb_v2: change USB stream config logic
Initial / default USB stream configuration is now set always as a
dvb_usb_device_properties. Dynamic configuration is done top of
that if callback .get_usb_stream_config() exists. Default values
are set when callback is called so callback needs only change
values that are different than default.
In addition of that define two macros DVB_USB_STREAM_BULK() and
DVB_USB_STREAM_ISOC() for filling struct usb_data_stream_properties
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Give DVB adapter as a parameter for callback. MAC address is
adapter property and it could be (at least in theory) there
is devices having multiple adapters and all has own MAC.
Also add error handling. If callback fails error is returned
which leads device unregister.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Fri, 15 Jun 2012 03:29:36 +0000 (00:29 -0300)]
[media] dvb_usb_v2: try to remove all adapters on exit
It did not removed adapter on error case as .num_adapters_initialized
was set after success adapter initialization. It should be safe to
try remove all possible adapters in any-case.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Thu, 14 Jun 2012 23:07:02 +0000 (20:07 -0300)]
[media] dvb_usb_v2: do not release USB interface when device reconnects
USB core will call disconnect and remove driver for us as device
will disconnect itself. After that it is loaded again as a new
device but it is warm and no firmware loading needed.
[media] dvb_usb_v2: return the download ret in dvb_usb_download_firmware
The first being this patch, no return value from dvb_usb_download_firmware
causes system wide dead lock with COLD disconnect as system attempts to continue
to warm state.
Antti Palosaari [Thu, 14 Jun 2012 05:44:47 +0000 (02:44 -0300)]
[media] dvb_usb_v2: attach tuners later
It is more than nice to have all those frontend pointers when
attaching tuner to the frontend in question. Make that possible
attaching tuners after dvb_register_frontend()
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Wed, 13 Jun 2012 00:16:52 +0000 (21:16 -0300)]
[media] dvb_usb_v2: do not check active fe when stop streaming
Do not check active frontend as it could be already shutdown.
Add some more debugs.
It turns out that device is put sleep earlier than streaming
is stopped in some cases. That is because streaming is running
different task and there is no locking.
Maybe some locking could be good idea to force stop streaming
before device is shut down. I can guess there could be problems
in someday cases like chip is sleep but streaming control is
requested after that...
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
In my understanding we never call .disconnect() when .probe()
returns error. Change .probe() to return error all cases it cannot
handle given interface and simplify .disconnect() handling.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 10 Jun 2012 00:22:06 +0000 (21:22 -0300)]
[media] af9015: use USB core soft_unbind
I think it is better to allow driver finish pending operations and
disconnect device. Killing all ongoing USB transfers could have very
bad effect, even break hardware in worst case.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 10 Jun 2012 00:11:28 +0000 (21:11 -0300)]
[media] dvb_usb_v2: do not free resources until delayed init is done
It was possible to free resources by unloading module while
initialization was still ongoing on delayed work.
Use PID to make decision on .disconnect() if caller is our
work or some other as work also calls .disconnect() in error
case. There could be better solution still...
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Thu, 7 Jun 2012 20:34:41 +0000 (17:34 -0300)]
[media] dvb_usb_v2: add .bInterfaceNumber match
There is no USB match flag for used USB interface. It is rather
common there is multiple interfaces offering different services.
For example one for television and one for remote controller.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
projects / karo-tx-linux.git / log