Joe Perches [Wed, 24 Jul 2013 21:13:03 +0000 (14:13 -0700)]
staging: gdm724x: Update logging
Make the logging prefixes match the module names
by adding #define pr_fmt(fmt) KBUILD_MODNAME and
converting printks to netdev_<level> when a
struct netdevice * is available and and pr_<level>
when not.
Remove embedded prefixes.
Add missing terminating newlines.
Remove an unnecessary rx-dropped message.
Remove an unnecessary temporary variable.
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: gdm724x: gdm_tty: fix tty api build warnings
This fixes the build warnings due to changes in the tty api. Note, I
don't know if the reference counting is correct, but at least there are
no more build warnings.
Also the tty code needs to be reworked, no static arrays of tty devices
and the like...
Cc: Won Kang <wonkang@gctsemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liu Xuezhao [Wed, 24 Jul 2013 18:08:17 +0000 (02:08 +0800)]
staging/lustre/obdclass: add obd_target.h
Move some server-side data structures form obd.h to obd_target.h. To
remove some code dependencies use HAVE_SERVER_SUPPORT to protect some
llog/fsfilt_* functions.
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1330
Lustre-change: http://review.whamcloud.com/2678 Signed-off-by: Liu Xuezhao <xuezhao.liu@emc.com> Signed-off-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Peng Tao <bergwolf@gmail.com> Reviewed-by: Mike Pershin <mike.pershin@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Wed, 24 Jul 2013 17:17:30 +0000 (01:17 +0800)]
staging/lustre/obdclass: use a dummy structure for lu_ref_link
Move the definition of struct lu_ref_link to lu_ref.h. If USE_LU_REF
is not defined then define it to be the empty struct. Change the
return type of lu_ref_add() and lu_ref_add_atomic() to void. Add
lu_ref_add_at() taking same arguments as lu_ref_add() togerther with a
pointer to a struct lu_ref_link and returning void. Adjust all
structures containing a lu_ref_link pointer to contain a struct
lu_ref_link instead. Use lu_ref_add_at() and lu_ref_del_at() to
handle embedded lu_ref_links.
[Original patch mainly changes lu_ref.[ch] but in upstream client we don't
have lu_ref code in the hope of moving to kobject refcounting. So the patch
only picks the other pieces of original patch, in order to keep code in
sync and make it easier to port future patches.]
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3059
Lustre-change: http://review.whamcloud.com/5920 Signed-off-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by: Mike Pershin <mike.pershin@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging/lustre/llite: fix 'data race condition' issues of lli_flags
Fix 'data race condition' defects found by Coverity version
6.5.0:
Data race condition (MISSING_LOCK)
Accessing variable without holding lock. Elsewhere,
this variable is accessed with lock held.
lli->lli_flags need to be protected by lli->lli_lock.
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2744
Lustre-change: http://review.whamcloud.com/6571 Signed-off-by: Sebastien Buisson <sebastien.buisson@bull.net> Reviewed-by: Fan Yong <fan.yong@intel.com> Reviewed-by: Keith Mannthey <keith.mannthey@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging/lustre: fix 'data race condition' issues in at_reset()
Fix 'data race condition' defects found by Coverity version
6.5.0:
Data race condition (MISSING_LOCK)
Accessing variable without holding lock. Elsewhere,
this variable is accessed with lock held.
at_reset() needs to take at->at_lock before modifying its members.
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2744
Lustre-change: http://review.whamcloud.com/6569 Signed-off-by: Sebastien Buisson <sebastien.buisson@bull.net> Reviewed-by: Bob Glossman <bob.glossman@intel.com> Reviewed-by: Keith Mannthey <keith.mannthey@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Wed, 24 Jul 2013 17:17:25 +0000 (01:17 +0800)]
staging/lustre/llite: handle io init failure in ll_fault_io_init()
In ll_fault_io_init(), if cl_io_init() has failed then cleanup and
return an ERR_PTR(). This fixes an oops in the page fault handling
code when a partially initialized io is used. In ll_page_mkwrite0() do
not call cl_io_fini() on an ERR_PTR().
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3487
Lustre-change: http://review.whamcloud.com/6735 Signed-off-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Lai Siyao <lai.siyao@intel.com> Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Leibovici [Wed, 24 Jul 2013 17:17:24 +0000 (01:17 +0800)]
staging/lustre/lmv: support DNE with HSM.
Send HSM requests to the appropriate MDT. Split lists of fids of HSM
actions into one list per MDT.
Move kuc registration/unregistration from MDC to LMV as this is not
MDT related.
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3365
Lustre-change: http://review.whamcloud.com/6714 Signed-off-by: Thomas Leibovici <thomas.leibovici@cea.fr> Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: jacques-Charles Lafoucriere <jacques-charles.lafoucriere@cea.fr> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <tao.peng@emc.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: dwc2: when dma is disabled, clear hcd->self.uses_dma
When dma is disabled inside dwc2 (because the hardware does not support
it, or the code was changed to disable it for testing), let the usb core
know about this by clearing hcd->self.uses_dma.
By default, the usb core assumes that dma is used when a dma_mask is
set, but this might not always match the dma_enable value in dwc2. To
prevent problems resulting from a mismatch, better to explicitely
disable dma in this case (though everything seemed to work with the
wrong value of uses_dma as well, probably only resulted in some unneeded
work).
staging: dwc2: disable dma when no dma_mask was setup
If the platform or bus driver failed to setup a dma_mask, but the
hardware advertises support for DMA, before DMA would be enabled in
dwc2, but disabled in the usb core, making all connectivity break.
With this commit, the dwc2 driver will emit a warning and fall back to
slave mode in this case.
Note that since commit 642f2ec (staging: dwc2: Fix dma-enabled platform
devices using a default dma_mask) the platform bindings make sure a DMA
mask is always present, but having this check here anyway is probably a
good from a defensive programming standpoint (in case of changes to
platform.c or addition of new glue layers).
Paul Zimmerman [Tue, 16 Jul 2013 19:22:12 +0000 (12:22 -0700)]
staging: dwc2: add driver parameter to set AHB config register value
The dwc2 driver sets the value of the DWC2 GAHBCFG register to 0x6,
which is GAHBCFG_HBSTLEN_INCR4. But different platforms may require
different values. In particular, the Broadcom 2835 SOC used in the
Raspberry Pi needs a value of 0x10, otherwise the DWC2 controller
stops working after a short period of heavy USB traffic.
So this patch adds another driver parameter named 'ahbcfg'. The
default value is 0x6. Any platform needing a different value should
add a DT attribute to set it.
This patch also removes the 'ahb_single' driver parameter, since
that bit can now be set using 'ahbcfg'.
This patch does not add DT support to platform.c, I will leave that
to whoever owns the first platform that needs a non-default value.
(Stephen?)
Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Zimmerman [Sat, 13 Jul 2013 21:53:48 +0000 (14:53 -0700)]
staging: dwc2: refactor dwc2_host_complete()
The parameters to dwc2_host_complete() didn't make much sense.
The 'context' parameter always came from the ->priv member of the
'dwc2_urb' parameter, and both of those always came from a struct
dwc2_qtd. So just pass in the struct dwc2_qtd instead.
This also allows us to null out the dwc2_qtd->urb member after it
is freed, which the calling code forgot to do in several places,
causing random driver crashes from dereferencing the freed pointer.
This also requires the calls to dwc2_hc_handle_tt_clear() to be
moved before the calls to dwc2_host_complete(), otherwise that
routine would do nothing because dwc2_qtd->urb has already been
freed.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xenia Ragiadakou [Wed, 26 Jun 2013 01:21:43 +0000 (04:21 +0300)]
staging: rtl8192u: fix comments in r819xU_cmdpkt.c
This patches fixes comments by:
- replacing // comments with /**/ comments
- removing unnecessary comments (trailing comments
with the function name, comments stating date/author
when they are placed inside the function definition)
- fixing internal alignment
Chad Williamson [Tue, 25 Jun 2013 23:59:24 +0000 (18:59 -0500)]
Staging: silicom: remove typedef for dev_desc_t
Remove the dev_desc_t typedef for the dev_desc struct in bpctl_mod.c,
resolving a checkpatch.pl warning. In fact, we can use an anonymous
struct, since it's only used in the single dev_desc array of device
descriptions, whose definition follows immediately.
Signed-off-by: Chad Williamson <chad@dahc.us> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: android: binder: fix binder interface for 64bit compat layer
The changes in this patch will fix the binder interface for use on 64bit
machines and stand as the base of the 64bit compat support. The changes
apply to the structures that are passed between the kernel and
userspace.
Most of the changes applied mirror the change to struct binder_version
where there is no need for a 64bit wide protocol_version(on 64bit
machines). The change inlines with the existing 32bit userspace(the
structure has the same size) and simplifies the compat layer such that
the same handler can service the BINDER_VERSION ioctl.
Other changes make use of kernel types as well as user-exportable ones
and fix format specifier issues.
staging: android: binder: replace types with portable ones
Since this driver is meant to be used on different types of processors
and a portable driver should specify the size a variable expects to be
this patch changes the types used throughout the binder interface.
We use "userspace" types since this header will be exported and used by
the Android filesystem.
The patch does not change in any way the functionality of the binder driver.
The Android userspace aligns the data written to the binder buffers to
4bytes. Thus for 32bit platforms or 64bit platforms running an 32bit
Android userspace we can have a buffer looking like this:
BinderDriverCommands mirror the ioctl usage. Thus the size of the
structure passed through the interface should be used to generate the
ioctl No.
The change reflects the type being passed from the user space-a pointer
to a binder_buffer. This change should not affect the existing 32bit
user space since BC_FREE_BUFFER is computed as:
and for a 32bit compiler BC_FREE_BUFFER will have the same computed
value. This change will also ease our work in differentiating
BC_FREE_BUFFER from COMPAT_BC_FREE_BUFFER.
This change will fix the BINDER_SET_MAX_THREADS ioctl to use __u32
instead of size_t for setting the max threads. Thus using the same
handler for 32 and 64bit kernels.
This value is stored internally in struct binder_proc and set to 15
on open_binder() in the libbinder API(thus no need for a 64bit size_t
on 64bit platforms).
Ian Abbott [Fri, 28 Jun 2013 16:09:28 +0000 (17:09 +0100)]
staging: comedi: COMEDI_NI_LABPC_ISA no longer depends on VIRT_TO_BUS
After migrating ISA DMA support from the "ni_labpc" module to the new
"ni_labpc_isadma" module, the `COMEDI_NI_LABPC_ISA` configuration option
no longer depends on `VIRT_TO_BUS`, so remove the dependency.
(The new `COMEDI_NI_LABPC_ISADMA` option does depend on `VIRT_TO_BUS`
but is not configured manually and is only selected automatically if the
`VIRT_TO_BUS` and `ISA_DMA_API` options are set.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 28 Jun 2013 16:09:26 +0000 (17:09 +0100)]
staging: comedi: ni_labpc: migrate DMA status handling
Migrate the code for checking and handling the interrupt status handling
for ISA DMA transfers into new a new function
`labpc_handle_dma_status()` in the "ni_labpc_isadma" module. Provide a
dummy inline function in "ni_labpc_isadma.h" if the "ni_labpc_isadma"
module is not being built.
The static function `handle_isa_dma()` also needs to move across to the
new module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 28 Jun 2013 16:09:24 +0000 (17:09 +0100)]
staging: comedi: ni_labpc: migrate DMA transfer set-up
Migrate the code for setting up an ISA DMA transfer into a new function
`labpc_setup_dma()` in the "ni_labpc_isadma" module. Provide a dummy
inline function in "ni_labpc_isadma.h" if the "ni_labpc_isadma" module
is not being built.
The static function `labpc_suggest_transfer_size()` also needs to move
across to the new module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-beck.git / log