ARM: shmobile: armadillo800eva: A3SP domain includes USB
Because USB Func is controlled by external IRQ mode,
it is possible to control USB under A3SP domain to reduce power.
This patch enables it.
Armadillo800eva board switchs USB Host/Func by SW1.6,
So, the device to adds into domain is selected on this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: shmobile: armadillo800eva: A4LC domain includes LCDC
It is possible to control LCDC under A4LC domain to reduce power.
This patch enable it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: shmobile: armadillo800eva: USB Func enables external IRQ mode
We can control renesas_usbhs driver as 2 way which are
autonomy mode and external IRQ trigger mode.
Autonomy mode is very easy settings for platform,
but it required USB power domain always ON,
since its connection/disconnection IRQ come from it.
If platform uses external IRQ trigger mode,
USB power domain can be OFF, since its
connection/disconnection IRQ come from external IRQ.
This patch enable external IRQ mode.
Now it is possible to add USB support on A4SP domain.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: shmobile: r8a7740: add A4LC pm domain support
This patch adds basic A4LC pm domain support.
Now, below devices can be controled by PM
MERAM, LCDC, VOU, ICBS, SDENC-Link
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: shmobile: r8a7740: fixup: MSEL1CR 7bit control
MSEL1CR 7bit selects IRQ7 source pin which was
VBUS pin or A21/MSIOF0_RSYNC/MSIOF1_TSYNC pin.
But current pfc-r8a7740 MSEL1CR 7bit setting was wrong.
This patch fix it up
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: shmobile: soc-core: add R-mobile PM domain common APIs
This patch adds Renesas R-mobile series common PM domain APIs.
R-mobile CPU can use/switch this API
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: mach-shmobile: Convert sh_clk_mstp32_register to sh_clk_mstp_register
sh_clk_mstp32_register is deprecated. This convert to sh_clk_mstp_register.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: shmobile: use common extra gpio functions on armadillo800eva
This patch switch over to use common extra gpio method,
and reduced a waste of code on SH-ARM.
But these functions should be replaced by correct
gpio function in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: shmobile: armadillo800eva: enable DMAEngine on USB
It is possible to reduce CPU load if USB used DMAEngine.
This patch enabled it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: shmobile: armadillo800eva: enable DMAEngine on SDHI
It is possible to reduce CPU load if SDHI used DMAEngine.
This patch enabled it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: shmobile: armadillo800eva: enable DMAEngine on FSI
It is possible to reduce CPU load if FSI playback used DMAEngine.
This patch enabled it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Merge branch 'renesas-r8a7740' into renesas-armadillo
* renesas-r8a7740:
ARM: shmobile: use common DMAEngine definitions on r8a7740
ARM: shmobile: r8a7740: add DMAEngine support for USB
ARM: shmobile: r8a7740: add DMAEngine support for SDHI
ARM: shmobile: r8a7740: add DMAEngine support for FSI
ARM: shmobile: add common DMAEngine definitions
ARM: shmobile: add common extra gpio functions
ARM: shmobile: use common DMAEngine definitions on r8a7740
This patch switch over to use common DMAEngine definitions,
and reduced a waste of code.
It is easy to understand if sh_dmae_pdata / sh_dmae_slave_config
settings are used defined value instead of direct value.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: shmobile: r8a7740: add DMAEngine support for USB
Current shdmac can support USB DMAC on r8a7740.
This support reduce CPU duty when USB access.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: shmobile: r8a7740: add DMAEngine support for SDHI
Current shdmac can support SDHI DMAC on r8a7740.
This support reduce CPU duty when SDHI access.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: shmobile: r8a7740: add DMAEngine support for FSI
Current shdmac can support FSI DMAC on r8a7740.
This support reduce CPU duty when sound was playback.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Current shmobile have DMAEngine specific settings on each CPU code,
but SH-ARM DMAC use same value.
This patch adds new dma-register.h header to share definitions
and reduce a waste of code on SH-ARM architecture.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Current gpio frame work doesn't have the method to control
just pull up/down/free, but some SH-ARM boards need such kind of operation.
This patch adds common extra gpio functions for SH-ARM.
But these functions should be replaced by correct
gpio function in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This patch enable HDMI support on CON3.
And removed unnecessary CONFIG_SYSFS_DEPRECATED_xxx config.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: shmobile: r8a7740: add FSI-B (for HDMI) GPIO support
In order to enable FSI-B selection from platform board,
this patch adds its interface to GPIO framework.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: shmobile: r8a7740: add FSI parent clock support
r8a7740 FSI can select its parent clock,
and its selection is dependent on platform board.
In order to enable FSI parent selection from platform board,
this patch adds its interface to clock framework.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
It is required from sh_mobile_ceu_camera driver.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
r8a7740 chip has lasting errata on MERAM buffer, and this patch adds
its work-around on setup-r8a7740.c
It solved CEU/VIO6C/2D-DMAC/VCP1/VPU5F/JPU/DISP memroy access error.
But MERAM driver can't control this issue,
since this work-around requires access to non-MERAM register address.
So, This it will be called as board specific code at this point.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
In order to enable HDMI GPIO selection from platform board,
this patch adds its interface to GPIO framework.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
It is required from sh_mobile_hdmi driver.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: shmobile: r8a7740: add HDMI interrupt support
It is required from sh_mobile_hdmi driver.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: mach-shmobile: add missing GPIO IRQ configuration on mackerel
SDHI0 card-detect GPIO IRQ on mackarel currently works, because it is the
default configuration of IRQ26. However, we should not rely on this and
should configure the function explicitly.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
ARM: mach-shmobile: Fix build when SMP is enabled and EMEV2 is not enabled
Build failed, when SMP is enabled and EMEV2 is not enabled.
arch/arm/mach-shmobile/built-in.o: In function `shmobile_platform_cpu_kill':
/home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:62: undefined reference to `emev2_platform_cpu_kill'
arch/arm/mach-shmobile/built-in.o: In function `shmobile_smp_get_core_count':
/home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:39: undefined reference to `emev2_get_core_count'
arch/arm/mach-shmobile/built-in.o: In function `shmobile_smp_prepare_cpus':
/home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:53: undefined reference to `emev2_smp_prepare_cpus'
arch/arm/mach-shmobile/built-in.o: In function `platform_secondary_init':
/home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:78: undefined reference to `emev2_secondary_init'
arch/arm/mach-shmobile/built-in.o: In function `boot_secondary':
/home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:90: undefined reference to `emev2_boot_secondary
This is the cause by when EMEV2 is disabled, that the check by OF of EMEV2 is
performed in platsmp.c.
This patch revise what the function about EMEV2 may not be used in this file,
when EMEV2 is not enabled.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
chclr_write() will use (chan_reg + chclr_offset).
In sh7372 case, DMA1CHCLR is started from 0xfe008220,
and chan_reg is started from 0xfe008020 (= sh7372_dmae0_resources).
Thus, chclr_offset should be (0x220 - 0x20) instead of 0x220.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
regulator: support multiple dummy fixed regulators
Currently regulator_register_fixed() uses a constant name to register a
fixed dummy regulator. This is sufficient in principle, since there is no
reason to register multiple such regulators. The user can simply supply all
consumers in one array and use it to initialise such a regulator. However,
in some cases it can be convenient to register multiple such regulators.
This is also a prerequisite for the upcoming patch, that will add a voltage
parameter to this function. The original function is provided as a wrapper
macro.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Linus Torvalds [Sun, 17 Jun 2012 00:01:41 +0000 (17:01 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs compile warning fixes from Chris Mason.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: cast devid to unsigned long long for printk %llu
Btrfs: init old_generation in get_old_root
Linus Torvalds [Sun, 17 Jun 2012 00:00:15 +0000 (17:00 -0700)]
Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull arch/tile update from Chris Metcalf:
"This one-line bug fix unbreaks glibc robust mutexes (among other
things no doubt), from code merged in during the 3.5 merge window but
which we had been running internally at Tilera for almost a year."
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tile: fix bug in get_user() for 4-byte values
Linus Torvalds [Sat, 16 Jun 2012 23:59:05 +0000 (16:59 -0700)]
Merge tag 'fbdev-fixes-for-3.5-1' of git://github.com/schandinat/linux-2.6
Pull fbdev fixes from Florian Tobias Schandinat:
- two fixes for s3c-fb by Jingoo Han (including a fix for a potential
division by zero)
- a couple of randconfig fixes by Arnd Bergmann
- a cleanup for bfin_adv7393fb by Emil Goode
* tag 'fbdev-fixes-for-3.5-1' of git://github.com/schandinat/linux-2.6:
video: s3c-fb: fix possible division by zero in s3c_fb_calc_pixclk
video: s3c-fb: clear SHADOWCON register when clearing hardware window registers
drivers/tosa: driver needs I2C and SPI to compile
drivers/savagefb: use mdelay instead of udelay
video/console: automatically select a font
video/ili9320: do not mark exported functions __devexit
drivers/video: use correct __devexit_p annotation
video: bfin_adv7393fb: Convert to kstrtouint_from_user
Chris Metcalf [Sat, 16 Jun 2012 20:53:06 +0000 (16:53 -0400)]
tile: fix bug in get_user() for 4-byte values
The definition of 32-bit values in the 64-bit tilegx architecture is that
they should be sign-extended regardless of whether they are considered
signed or unsigned by the compiler. Accordingly, we need to use an
"ld4s" rather than "ld4u" to load and sign-extend for get_user().
This fixes glibc bug 14238 (see http://sourceware.org/bugzilla),
introduced during the 3.5 merge window.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Hugh Dickins [Sat, 16 Jun 2012 00:55:50 +0000 (17:55 -0700)]
swap: fix shmem swapping when more than 8 areas
Minchan Kim reports that when a system has many swap areas, and tmpfs
swaps out to the ninth or more, shmem_getpage_gfp()'s attempts to read
back the page cannot locate it, and the read fails with -ENOMEM.
Whoops. Yes, I blindly followed read_swap_header()'s pte_to_swp_entry(
swp_entry_to_pte()) technique for determining maximum usable swap
offset, without stopping to realize that that actually depends upon the
pte swap encoding shifting swap offset to the higher bits and truncating
it there. Whereas our radix_tree swap encoding leaves offset in the
lower bits: it's swap "type" (that is, index of swap area) that was
truncated.
Fix it by reducing the SWP_TYPE_SHIFT() in swapops.h, and removing the
broken radix_to_swp_entry(swp_to_radix_entry()) from read_swap_header().
This does not reduce the usable size of a swap area any further, it
leaves it as claimed when making the original commit: no change from 3.0
on x86_64, nor on i386 without PAE; but 3.0's 512GB is reduced to 128GB
per swapfile on i386 with PAE. It's not a change I would have risked
five years ago, but with x86_64 supported for ten years, I believe it's
appropriate now.
Hmm, and what if some architecture implements its swap pte with offset
encoded below type? That would equally break the maximum usable swap
offset check. Happily, they all follow the same tradition of encoding
offset above type, but I'll prepare a check on that for next.
Linus Torvalds [Sat, 16 Jun 2012 00:39:32 +0000 (17:39 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a couple of minor fixes, one for a preempt warning in the
mpt2sas driver and one is a config failure with the new sd async
domain."
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] Fix sd_probe_domain config problem
[SCSI] mpt2sas: Fix unsafe using smp_processor_id() in preemptible
Linus Torvalds [Sat, 16 Jun 2012 00:37:23 +0000 (17:37 -0700)]
Merge tag 'nfs-for-3.5-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- Fix a couple of mount regressions due to the recent cleanups.
- Fix an Oops in the open recovery code
- Fix an rpc_pipefs upcall hang that results from some of the net
namespace work from 3.4.x (stable kernel candidate).
- Fix a couple of write and o_direct regressions that were found at
last weeks Bakeathon testing event in Ann Arbor."
* tag 'nfs-for-3.5-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: add an endian notation for sparse
NFSv4.1: integer overflow in decode_cb_sequence_args()
rpc_pipefs: allow rpc_purge_list to take a NULL waitq pointer
NFSv4 do not send an empty SETATTR compound
NFSv2: EOF incorrectly set on short read
NFS: Use the NFS_DEFAULT_VERSION for v2 and v3 mounts
NFS: fix directio refcount bug on commit
NFSv4: Fix unnecessary delegation returns in nfs4_do_open
NFSv4.1: Convert another trivial printk into a dprintk
NFS4: Fix open bug when pnfs module blacklisted
NFS: Remove incorrect BUG_ON in nfs_found_client
NFS: Map minor mismatch error to protocol not support error.
NFS: Fix a commit bug
NFS4: Set parsed mount data version to 4
NFSv4.1: Ensure we clear session state flags after a session creation
NFSv4.1: Convert a trivial printk into a dprintk
NFSv4: Fix up decode_attr_mdsthreshold
NFSv4: Fix an Oops in the open recovery code
NFSv4.1: Fix a request leak on the back channel
Linus Torvalds [Sat, 16 Jun 2012 00:35:01 +0000 (17:35 -0700)]
Merge branch 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Pull DMA-mapping fixes from Marek Szyprowski:
"A set of minor fixes for dma-mapping code (ARM and x86) required for
Contiguous Memory Allocator (CMA) patches merged in v3.5-rc1."
* 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
x86: dma-mapping: fix broken allocation when dma_mask has been provided
ARM: dma-mapping: fix debug messages in dmabounce code
ARM: mm: fix type of the arm_dma_limit global variable
ARM: dma-mapping: Add missing static storage class specifier
Linus Torvalds [Sat, 16 Jun 2012 00:28:20 +0000 (17:28 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Pull PowerPC fix from Paul Mackerras:
"Just one commit, and a one-liner at that, but an important one;
without it hard_irq_disable() does nothing on powerpc."
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
Make hard_irq_disable() actually hard-disable interrupts
Linus Torvalds [Sat, 16 Jun 2012 00:27:31 +0000 (17:27 -0700)]
Merge branch 'for-3.5' of git://linux-nfs.org/~bfields/linux
Pull two nfsd bugfixes from J. Bruce Fields.
* 'for-3.5' of git://linux-nfs.org/~bfields/linux:
nfsd4: BUG_ON(!is_spin_locked()) no good on UP kernels
NFS: hard-code init_net for NFS callback transports
Linus Torvalds [Sat, 16 Jun 2012 00:17:15 +0000 (17:17 -0700)]
Merge tag 'stable/for-linus-3.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull five Xen bug-fixes from Konrad Rzeszutek Wilk:
- When booting as PVHVM we would try to use PV console - but would not validate
the parameters causing us to crash during restore b/c we re-use the wrong event
channel.
- When booting on machines with SR-IOV PCI bridge we didn't check for the bridge
and tried to use it.
- Under AMD machines would advertise the APERFMPERF resulting in needless amount
of MSRs from the guest.
- A global value (xen_released_pages) was not subtracted at bootup when pages
were added back in. This resulted in the balloon worker having the wrong
account of how many pages were truly released.
- Fix dead-lock when xen-blkfront is run in the same domain as xen-blkback.
* tag 'stable/for-linus-3.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: mark local pages as FOREIGN in the m2p_override
xen/setup: filter APERFMPERF cpuid feature out
xen/balloon: Subtract from xen_released_pages the count that is populated.
xen/pci: Check for PCI bridge before using it.
xen/events: Add WARN_ON when quick lookup found invalid type.
xen/hvc: Check HVM_PARAM_CONSOLE_[EVTCHN|PFN] for correctness.
xen/hvc: Fix error cases around HVM_PARAM_CONSOLE_PFN
xen/hvc: Collapse error logic.
Linus Torvalds [Sat, 16 Jun 2012 00:10:02 +0000 (17:10 -0700)]
Merge tag 'usb-3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg Kroah-Hartman:
"Here are a bunch of tiny fixes for the USB core and drivers for
3.5-rc3
A bunch of gadget fixes, and new device ids, as well as some fixes for
a number of different regressions that have been reported recently.
We also fixed some PCI host controllers to resolve a long-standing bug
with a whole class of host controllers that have been plaguing people
for a number of kernel releases, preventing their systems from
suspending properly.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'usb-3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (41 commits)
USB: fix gathering of interface associations
usb: ehci-sh: fix illegal phy_init() running when platform_data is NULL
usb: cdc-acm: fix devices not unthrottled on open
Fix OMAP EHCI suspend/resume failure (i693)
USB: ohci-hub: Mark ohci_finish_controller_resume() as __maybe_unused
usb: use usb_serial_put in usb_serial_probe errors
USB: EHCI: Fix build warning in xilinx ehci driver
USB: fix PS3 EHCI systems
xHCI: Increase the timeout for controller save/restore state operation
xhci: Don't free endpoints in xhci_mem_cleanup()
xhci: Fix invalid loop check in xhci_free_tt_info()
xhci: Fix error path return value.
USB: Checking the wrong variable in usb_disable_lpm()
usb-storage: Add 090c:1000 to unusal-devs
USB: serial-generic: use a single set of device IDs
USB: serial: Enforce USB driver and USB serial driver match
USB: add NO_D3_DURING_SLEEP flag and revert 151b61284776be2
USB: option: add more YUGA device ids
USB: mos7840: Fix compilation of usb serial driver
USB: option: fix memory leak
...
Linus Torvalds [Fri, 15 Jun 2012 23:58:10 +0000 (16:58 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar.
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
watchdog: Quiet down the boot messages
perf/x86: Fix broken LBR fixup code
tracing: Have tracing_off() actually turn tracing off
Linus Torvalds [Fri, 15 Jun 2012 23:52:35 +0000 (16:52 -0700)]
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core updates (RCU and locking) from Ingo Molnar:
"Most of the diffstat comes from the RCU slow boot regression fixes,
but there's also a debuggability improvements/fixes."
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
memblock: Document memblock_is_region_{memory,reserved}()
rcu: Precompute RCU_FAST_NO_HZ timer offsets
rcu: Move RCU_FAST_NO_HZ per-CPU variables to rcu_dynticks structure
rcu: Update RCU_FAST_NO_HZ tracing for lazy callbacks
rcu: RCU_FAST_NO_HZ detection of callback adoption
spinlock: Indicate that a lockup is only suspected
kdump: Execute kmsg_dump(KMSG_DUMP_PANIC) after smp_send_stop()
panic: Make panic_on_oops configurable
Pull target updates from Nicholas Bellinger:
"This series contains post merge qla_target.c / tcm_qla2xxx bugfixes
from the past weeks, including the patch to allow target-core to use
an optional session shutdown callback to help address an active I/O
shutdown bug in tcm_qla2xxx code (Joern).
Also included is a target regression bugfix releated to explict ALUA
target port group CDB emulation that is CC'ed to stable (Roland)."
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
qla2xxx: Remove version.h header file inclusion
tcm_qla2xxx: Handle malformed wwn strings properly
tcm_qla2xxx: tcm_qla2xxx_handle_tmr() can be static
qla2xxx: Don't leak commands we give up on in qlt_do_work()
qla2xxx: Don't crash if we can't find cmd for failed CTIO
tcm_qla2xxx: Don't insert nacls without sessions into the btree
target: Return error to initiator if SET TARGET PORT GROUPS emulation fails
tcm_qla2xxx: Clear session s_id + loop_id earlier during shutdown
tcm_qla2xxx: Convert to TFO->put_session() usage
target: Add TFO->put_session() caller for HW fabric session shutdown
Linus Torvalds [Fri, 15 Jun 2012 23:04:37 +0000 (16:04 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs update from Chris Mason:
"The dates look like I had to rebase this morning because there was a
compiler warning for a printk arg that I had missed earlier.
These are all fixes, including one to prevent using stale pointers for
device names, and lots of fixes around transaction abort cleanups
(Josef, Liu Bo).
Jan Schmidt also sent in a number of fixes for the new reference
number tracking code.
Liu Bo beat me to updating the MAINTAINERS file. Since he thought to
also fix the git url, I kept his commit."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (24 commits)
Btrfs: update MAINTAINERS info for BTRFS FILE SYSTEM
Btrfs: destroy the items of the delayed inodes in error handling routine
Btrfs: make sure that we've made everything in pinned tree clean
Btrfs: avoid memory leak of extent state in error handling routine
Btrfs: do not resize a seeding device
Btrfs: fix missing inherited flag in rename
Btrfs: fix incompat flags setting
Btrfs: fix defrag regression
Btrfs: call filemap_fdatawrite twice for compression
Btrfs: keep inode pinned when compressing writes
Btrfs: implement ->show_devname
Btrfs: use rcu to protect device->name
Btrfs: unlock everything properly in the error case for nocow
Btrfs: fix btrfs_destroy_marked_extents
Btrfs: abort the transaction if the commit fails
Btrfs: wake up transaction waiters when aborting a transaction
Btrfs: fix locking in btrfs_destroy_delayed_refs
Btrfs: pass locked_page into extent_clear_unlock_delalloc if theres an error
Btrfs: fix race in tree mod log addition
Btrfs: add btrfs_next_old_leaf
...
Liu Bo [Thu, 14 Jun 2012 08:23:20 +0000 (02:23 -0600)]
Btrfs: avoid memory leak of extent state in error handling routine
We've forgotten to clear extent states in pinned tree, which will results in
space counter mismatch and memory leak:
WARNING: at fs/btrfs/extent-tree.c:7537 btrfs_free_block_groups+0x1f3/0x2e0 [btrfs]()
...
space_info 2 has 8380416 free, is not full
space_info total=12582912, used=4096, pinned=4096, reserved=0, may_use=0, readonly=4194304
btrfs state leak: start 29364224 end 29376511 state 1 in tree ffff880075f20090 refs 1
...
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Liu Bo [Thu, 14 Jun 2012 08:23:18 +0000 (02:23 -0600)]
Btrfs: fix missing inherited flag in rename
When we move a file into a directory with compression flag, we need to
inherite BTRFS_INODE_COMPRESS and clear BTRFS_INODE_NOCOMPRESS as well.
But if we move a file into a directory without compression flag, we need
to clear both of them.
It is the way how our setflags deals with compression flag, so keep
the same behaviour here.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Paul Mackerras [Fri, 15 Jun 2012 04:51:39 +0000 (14:51 +1000)]
Make hard_irq_disable() actually hard-disable interrupts
At present, hard_irq_disable() does nothing on powerpc because of
this code in include/linux/interrupt.h:
#ifndef hard_irq_disable
#define hard_irq_disable() do { } while(0)
#endif
So we need to make our hard_irq_disable be a macro. It was previously
a macro until commit 7230c56441 ("powerpc: Rework lazy-interrupt
handling") changed it to a static inline function.
Cc: stable@vger.kernel.org Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
--
arch/powerpc/include/asm/hw_irq.h | 3 +++
1 file changed, 3 insertions(+)
Josef Bacik [Fri, 8 Jun 2012 19:26:47 +0000 (15:26 -0400)]
Btrfs: call filemap_fdatawrite twice for compression
I removed this in an earlier commit and I was wrong. Because compression
can return from filemap_fdatawrite() without having actually set any of it's
pages as writeback() it can make filemap_fdatawait() do essentially nothing,
and then we won't find any ordered extents because they may not have been
created yet. So not only does this make fsync() completely useless, but it
will also screw up if you truncate on a non-page aligned offset since we
zero out the end and then wait on ordered extents and then call drop caches.
We can drop the cache before the io completes and then we try to unpin the
extent we just wrote we won't find it and everything goes sideways. So fix
this by putting it back and put a giant comment there to keep me from trying
to remove it in the future. Thanks,
Josef Bacik [Fri, 8 Jun 2012 19:16:12 +0000 (15:16 -0400)]
Btrfs: keep inode pinned when compressing writes
A user reported lots of problems using compression on the new code and it
turns out part of the problem was that igrab() was failing when we added a
new ordered extent. This is because when writing out an inode under
compression we immediately return without actually doing anything to the
pages, and then in another thread at some point down the line actually do
the ordered dance. The problem is between the point that we start writeback
and we actually add the ordered extent we could be trying to reclaim the
inode, which makes igrab() return NULL. So we need to do an igrab() when we
create the async extent and then drop it when we are done with it. This
makes sure we stay pinned in memory until the ordered extent can get a
reference on it and we are good to go. With this patch we no longer panic
in btrfs_finish_ordered_io(). Thanks,
Josef Bacik [Tue, 5 Jun 2012 18:13:12 +0000 (14:13 -0400)]
Btrfs: implement ->show_devname
Because btrfs can remove the device that was mounted we need to have a
->show_devname so that in this case we can print out some other device in
the file system to /proc/mount. So if there are multiple devices in a btrfs
file system we will just print the device with the lowest devid that we can
find. This will make everything consistent and deal with device removal
properly. The drawback is if you mount with a device that is higher than
the lowest devicd it won't show up as the mounted device in /proc/mounts,
but this is a small price to pay. This was inspired by Miao Xie's patch.
Thanks,
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <josef@redhat.com>
Josef Bacik [Mon, 4 Jun 2012 18:03:51 +0000 (14:03 -0400)]
Btrfs: use rcu to protect device->name
Al pointed out that we can just toss out the old name on a device and add a
new one arbitrarily, so anybody who uses device->name in printk could
possibly use free'd memory. Instead of adding locking around all of this he
suggested doing it with RCU, so I've introduced a struct rcu_string that
does just that and have gone through and protected all accesses to
device->name that aren't under the uuid_mutex with rcu_read_lock(). This
protects us and I will use it for dealing with removing the device that we
used to mount the file system in a later patch. Thanks,
Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com>
Josef Bacik [Thu, 31 May 2012 19:58:55 +0000 (15:58 -0400)]
Btrfs: unlock everything properly in the error case for nocow
I was getting hung on umount when a transaction was aborted because a range
of one of the free space inodes was still locked. This is because the nocow
stuff doesn't unlock anything on error. This fixed the problem and I
verified that is what was happening. Thanks,
Josef Bacik [Thu, 31 May 2012 19:54:30 +0000 (15:54 -0400)]
Btrfs: fix btrfs_destroy_marked_extents
So we're forcing the eb's to have their ref count set to 1 so invalidatepage
works but this breaks lots of things, for example root nodes, and is just
plain wrong, we don't need to just evict all of this stuff. Also drop the
invalidatepage altogether and add a page_cache_release(). With this patch
we no longer hang when trying to access the root nodes after an aborted
transaction and we no longer leak memory. Thanks,
Josef Bacik [Thu, 31 May 2012 19:52:43 +0000 (15:52 -0400)]
Btrfs: abort the transaction if the commit fails
If a transaction commit fails we don't abort it so we don't set an error on
the file system. This patch fixes that by actually calling the abort stuff
and then adding a check for a fs error in the transaction start stuff to
make sure it is caught properly. Thanks,
Josef Bacik [Thu, 31 May 2012 19:49:57 +0000 (15:49 -0400)]
Btrfs: wake up transaction waiters when aborting a transaction
I was getting lots of hung tasks and a NULL pointer dereference because we
are not cleaning up the transaction properly when it aborts. First we need
to reset the running_transaction to NULL so we don't get a bad dereference
for any start_transaction callers after this. Also we cannot rely on
waitqueue_active() since it's just a list_empty(), so just call wake_up()
directly since that will do the barrier for us and such. Thanks,
Josef Bacik [Thu, 31 May 2012 15:06:33 +0000 (11:06 -0400)]
Btrfs: fix locking in btrfs_destroy_delayed_refs
The transaction abort stuff was throwing warnings from the list debugging
code because we do a list_del_init outside of the delayed_refs spin lock.
The delayed refs locking makes baby Jesus cry so it's not hard to get wrong,
but we need to take the ref head mutex to make sure it's not being processed
currently, and so if it is we need to drop the spin lock and then take and
drop the mutex and do the search again. If we can take the mutex then we
can safely remove the head from the list and carry on. Now when the
transaction aborts I don't get the list debugging warnings. Thanks,
Josef Bacik [Wed, 30 May 2012 19:35:17 +0000 (15:35 -0400)]
Btrfs: pass locked_page into extent_clear_unlock_delalloc if theres an error
While doing my enospc work I got a transaction abortion that resulted in a
panic when we tried to unlock_page() an already unlocked page. This is
because we aren't calling extent_clear_unlock_delalloc with the locked page
so it was unlocking all the pages in the range. This is wrong since
__extent_writepage expects to have the page locked still unless we return
*page_started as 1. This should keep us from panicing. Thanks,
Once a configuration is selected, usb_set_configuration() walks the
known interfaces of a given configuration and calls find_iad() on
each of them to set the interface association pointer the interface
is included in.
The problem here is that the loop variable is taken for the interface
number in the comparison logic that gathers the association. Which is
fine as long as the descriptors are sane.
In the case above, however, the logic gets out of sync and the
interface association fields of all interfaces beyond the interface
number gap are wrong.
Fix this by passing the interface's bInterfaceNumber to find_iad()
instead.
Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: bEN <ml_all@circa.be> Reported-by: Ivan Perrone <ivanperrone@hotmail.com> Tested-by: ivan perrone <ivanperrone@hotmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: ehci-sh: fix illegal phy_init() running when platform_data is NULL
If the platform_data is not set, pdata will be uninitialized value.
Since the driver has the following code, if the condition is true when
the pdata is uninitialized value, the driver may jump to the illegal
phy_init().
if (pdata && pdata->phy_init)
pdata->phy_init();
This patch also fixes the following warning:
CC drivers/usb/host/ehci-hcd.o
drivers/usb/host/ehci-sh.c: In function ‘ehci_hcd_sh_probe’:
drivers/usb/host/ehci-sh.c:104: warning: ‘pdata’ may be used uninitialized in this function
Otto Meta [Wed, 6 Jun 2012 16:46:21 +0000 (18:46 +0200)]
usb: cdc-acm: fix devices not unthrottled on open
Currently CDC-ACM devices stay throttled when their TTY is closed while
throttled, stalling further communication attempts after the next open.
Unthrottling during open/activate got lost starting with kernel
3.0.0 and this patch reintroduces it.
Signed-off-by: Otto Meta <otto.patches@sister-shadow.de> Cc: stable <stable@vger.kernel.org> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xen: mark local pages as FOREIGN in the m2p_override
When the frontend and the backend reside on the same domain, even if we
add pages to the m2p_override, these pages will never be returned by
mfn_to_pfn because the check "get_phys_to_machine(pfn) != mfn" will
always fail, so the pfn of the frontend will be returned instead
(resulting in a deadlock because the frontend pages are already locked).
The explanation is in the comment within the code:
We need to do this because the pages shared by the frontend
(xen-blkfront) can be already locked (lock_page, called by
do_read_cache_page); when the userspace backend tries to use them
with direct_IO, mfn_to_pfn returns the pfn of the frontend, so
do_blockdev_direct_IO is going to try to lock the same pages
again resulting in a deadlock.
Internally the xen-blkback uses m2p_add_override to swizzle (temporarily)
a 'struct page' to have a different MFN (so that it can point to another
guest). It also can easily find out whether another pfn corresponding
to the mfn exists in the m2p, and can set the FOREIGN bit
in the p2m, making sure that mfn_to_pfn returns the pfn of the backend.
This allows the backend to perform direct_IO on these pages, but as a
side effect prevents the frontend from using get_user_pages_fast on
them while they are being shared with the backend.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
NFS: hard-code init_net for NFS callback transports
In case of destroying mount namespace on child reaper exit, nsproxy is zeroed
to the point already. So, dereferencing of it is invalid.
This patch hard-code "init_net" for all network namespace references for NFS
callback services. This will be fixed with proper NFS callback
containerization.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Jan Schmidt [Mon, 11 Jun 2012 08:52:38 +0000 (10:52 +0200)]
Btrfs: fix race in tree mod log addition
When adding to the tree modification log, we grab two locks at different
stages. We must not drop the outer lock until we're done with section
protected by the inner lock. This moves the unlock call for the outer lock
to the appropriate position.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Jan Schmidt [Mon, 11 Jun 2012 06:29:29 +0000 (08:29 +0200)]
Btrfs: add btrfs_next_old_leaf
To make sense of the tree mod log, the backref walker not only needs
btrfs_search_old_slot, but it also called btrfs_next_leaf, which in turn was
calling btrfs_search_slot. This obviously didn't give the correct result.
This commit adds btrfs_next_old_leaf, a drop-in replacement for
btrfs_next_leaf with a time_seq parameter. If it is zero, it behaves exactly
like btrfs_next_leaf. If it is non-zero, it will use btrfs_search_old_slot
with this time_seq parameter.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Jan Schmidt [Tue, 5 Jun 2012 14:41:24 +0000 (16:41 +0200)]
Btrfs: fix return value for __tree_mod_log_oldest_root
In __tree_mod_log_oldest_root() we must return the found operation even if
it's not a ROOT_REPLACE operation. Otherwise, the caller assumes that there
are no operations to be rewinded and returns immediately.
The code in the caller is modified to improve readability.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Jan Schmidt [Mon, 4 Jun 2012 14:54:57 +0000 (16:54 +0200)]
Btrfs: use btrfs_read_lock_root_node in get_old_root
get_old_root could race with root node updates because we weren't locking
the node early enough. Use btrfs_read_lock_root_node to grab the root locked
in the very beginning and release the lock as soon as possible (just like
btrfs_search_slot does).
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Jan Schmidt [Thu, 14 Jun 2012 14:10:13 +0000 (16:10 +0200)]
Btrfs: remove obsolete btrfs_next_leaf call from __resolve_indirect_ref
When resolving indirect refs, we used to call btrfs_next_leaf in case we
didn't find an exact match. While we should find exact matches most of the
time, in case we don't, we must continue searching. Treating those matches
differently depending on the level we're searching doesn't make sense.
Even worse, we might end up searching for a key larger than the largest, in
which case there is no next_leaf and subsequent jobs would fail. This commit
drops the bogous lines.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Linus Torvalds [Thu, 14 Jun 2012 12:43:32 +0000 (15:43 +0300)]
Merge tag 'pinctrl-fixes-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pinctrl fixes from Linus Walleij:
- section markup fixes
- clk_prepare() fix to conform to the clk API
- memory leaks
- incorrect debug messages
- bad errorpaths
- typos
* tag 'pinctrl-fixes-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: pinctrl-mxs: set platform driver data to NULL at errpath and at unregister
pinctrl: pinctrl-mxs: Take care of frees if the kzalloc fails
pinctrl: pinctrl-imx: fix incorrect debug message of maps
pinctrl: pinctrl-imx: free if of_get_parent fails to get the parent node
pinctrl: pinctrl-imx: free allocated pinctrl_map structure only once and use kernel facilities for IMX_PMX_DUMP
pinctrl: nomadik: fix up typo
pinctrl: nomadik: add clk_prepare() call
pinctrl: fix a minor harmless typo
pinctrl: sirf: mark of_device_id match table as __devinitconst
Linus Torvalds [Thu, 14 Jun 2012 12:38:48 +0000 (15:38 +0300)]
Merge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
- Fix a regression of USB-audio PCM assignment since 3.4
- A few VGA-switcheroo-related fixes for proper HDMI audio enablement
- Fixed the missing initializations of HD-audio verbs, which may have
resulted in various breakage
- Some driver-specific ASoC updates
- A few fixes for the dynamic PCM code
- The addition of pinctrl support for the i.MX audmux which didn't make
it into -rc1 due to cross tree dependency issues
- A few minor fixes in compress API codes
* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Don't forget to call init verbs added by fixup list
ALSA: HDA: Pin fixup for Zotac Z68 motherboard
ALSA: compress_core: cleanup pointers on stop
ALSA: compress_core: don't wake up on pause
ALSA: hda - Fix detection of Creative SoundCore3D controllers
vga_switcheroo: Enable/disable audio clients at the right time
ALSA: hda - HDMI Audio init all connectors when VGA-switcheroo is off
vga_switcheroo: Fix error without CONFIG_VGA_SWITCHEROO
ALSA: hda - Fix uninitialized HDMI controllers with VGA-switcheroo
vga_switcheroo: Add a helper function to get the client state
ALSA: usb-audio: Fix substream assignments
ASoC: tegra: add MODULE_DEVICE_TABLE to tegra30_ahub
ASoC: wm2000: Always use a 4s timeout for the firmware
ASoC: dapm: Fix input list to use source widgets
ASoC: dpcm: Fix dpcm_get_be() to check that DAI is BE
ASoC: wm8994: Apply volume updates with clocks enabled
ASoC: wm8994: Ensure all AIFnCLK events are run from the _late variants
ASoC: imx-audmux: add pinctrl support
ASoC: dapm: Fix connected widget capture path query.
This has the fix for the wireless issues I ran into the other week as
well as:
1) Fix CAN c_can driver transmit handling resulting in BUG check
triggers, from AnilKumar Ch.
2) Fix packet drop monitor sleeping in atomic context, from Eric
Dumazet.
3) Fix mv643xx_eth driver build regression, from Andrew Lunn.
4) Inetpeer freeing needs an RCU grace period in order to avoid races
during tree invalidation. From Eric Dumazet.
5) Fix endianness bugs in xt_HMARK netfilter module, from Hans
Schillstrom.
6) Add proper module refcounting to l2tp_eth to avoid crash on module
unload, from Eric Dumazet.
7) Fix truncation of neighbour entry dumps due to logic errors in
neigh_dump_info() and friends, from Eric Dumazet.
8) The conversion of fib6_age() to dst_neigh_lookup() accidently
reversed the logic of a flags test, fix from Thomas Graf.
9) Fix checksum configuration in newer sky2 chips, from Stephen
Hemminger.
10) Revert BQL support in NIU driver, doesn't work.
11) l2tp_ip_sendmsg() illegally uses a route without a proper reference.
From Eric Dumazet.
12) be2net driver references an SKB after it's potentially been freed,
also from Eric Dumazet.
13) Fix RCU stalls in dummy net driver init. Also from Eric Dumazet.
14) lpc_eth has several bugs in it's transmit engine leading to packet
leaks and improper queue wakes, from Eric Dumazet.
15) Apply short DMA workaround to more tg3 chips, from Matt Carlson.
16) Add tilegx network driver.
17) Bonding queue mapping for a packet can get corrupted, fix from Eric
Dumazet.
18) Fix bug in netpoll_send_udp() SKB management that can leave garbage
in the payload in certain situations. From Eric Dumazet.
19) bnx2x driver interprets chip RX checksum offload incorrectly in
encapsulation situations. Fix from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
bnx2x: fix checksum validation
netpoll: fix netpoll_send_udp() bugs
bonding: Fix corrupted queue_mapping
bonding:record primary when modify it via sysfs
tilegx network driver: initial support
tg3: Apply short DMA frag workaround to 5906
net: stmmac: Fix clock en-/disable calls
lpc_eth: fix tx completion
lpc_eth: add missing ndo_change_mtu()
dummy: fix rcu_sched self-detected stalls
net: Reorder initialization in ip_route_output to fix gcc warning
virtio-net: fix a race on 32bit arches
r8169: avoid NAPI scheduling delay.
net: Make linux/tcp.h C++ friendly (trivial)
netdev: fix drivers/net/phy/ kernel-doc warnings
net/core: fix kernel-doc warnings
be2net: fix a race in be_xmit()
l2tp: fix a race in l2tp_ip_sendmsg()
mac80211: add back channel change flag
NFC: Fix possible NULL ptr deref when getting the name of a socket
...
projects / linux-beck.git / log