Takashi Iwai [Mon, 14 Jan 2013 16:05:25 +0000 (17:05 +0100)]
ALSA: hda - Use standard fixup table for IDT92HD71Bxx
This time, the only intrusive changes are for HP machines.
As the mute LED fixup and the bass speaker switch are required only
for HP machines, we can move these checks into the fixup entries; the
former is applied generically to all HP machines while the latter for
only certain models.
Takashi Iwai [Mon, 14 Jan 2013 15:03:38 +0000 (16:03 +0100)]
ALSA: hda - Use standard fixup table for STAC927x
This conversion is a bit tricky. Since STAC927x may take two
different volume-knob initialization values depending on the model, a
new flag, spec->volknob_init, is introduced to indicate whether it's
the standard volume-knob initialization or not.
Also, Dell BIOS model is now directly mapped onto the fixup table
instead of parsing in the function. This resulted in a new model ref,
STAC_927X_DELL_BIOS_SPDIF, which is a chained entry.
Also, for reducing the fixups, virtual entries like
STAC_927X_DELL_DMIC and STAC_D965_VERBS are introduced.
Takashi Iwai [Mon, 14 Jan 2013 14:20:13 +0000 (15:20 +0100)]
ALSA: hda - Use standard fixup table for STAC922x
Rather straightforward conversion, except for ones for Intel Mac.
As Intel Mac have only unique codec SSIDs, we need to remap the fixup
again for the codec SSID and call the new fixup there.
Also, we can reduce model enums like STAC_MACMINI, which are model
aliases for backward compatibility, since they can be pointed directly
via hda_model_fixup table.
Takashi Iwai [Mon, 7 Jan 2013 11:27:36 +0000 (12:27 +0100)]
ALSA: hda - Use generic parser for VIA codec driver
Yet another step forward. As all features for VIA codecs have been
implemented in the generic driver, we can move on to migrate the VIA
codec parser, too.
Takashi Iwai [Fri, 21 Dec 2012 14:17:06 +0000 (15:17 +0100)]
ALSA: hda - Add generic parser support to Analog Device codec driver
This patch adds the support for the generic auto-parser to AD codec
driver. For AD1988, the old code is replaced simply with the new
generic parser. For other codecs, new model "auto" is added and
directed to use the generic parser.
No fixup codes have been implemented yet as of now. Eventually we'd
replace each static quirk with the generic parser + fixup.
Takashi Iwai [Wed, 19 Dec 2012 15:39:18 +0000 (16:39 +0100)]
ALSA: hda - Use generic parser for Cirrus codec driver
This time, the target is Cirrus codec. Its parser is a subset of
generic parser, so we can migrate fully with it now.
The only tricky part is the handling of SPDIF automute.
Cirrus driver sets the SPDIF out plug over the headphone. As a
workaround, set spec->gen.master_mute for toggling the headphone (and
other) mute.
Takashi Iwai [Wed, 19 Dec 2012 17:04:37 +0000 (18:04 +0100)]
ALSA: hda - Use generic parser for CA0110 codec
CA0110 codec is a fairly straightforward hardware implementation,
and we can use the generic parser almost as is.
Just set spec->multi_cap_vol flag to follow the current behavior.
Takashi Iwai [Wed, 19 Dec 2012 16:35:47 +0000 (17:35 +0100)]
ALSA: hda - Use generic codec parser for C-Media codecs
Replace the old parser code for C-Media auto-parser with the latest
generic parser. For compatibility reason, the static bindings are
still left, but they could be cleaned up in future.
Takashi Iwai [Thu, 10 Jan 2013 17:21:56 +0000 (18:21 +0100)]
ALSA: hda - Protect user-defined arrays via mutex
The pincfgs, init_verbs and hints set by sysfs or patch might be
changed dynamically on the fly, thus we need to protect it.
Add a simple protection via a mutex.
Takashi Iwai [Thu, 10 Jan 2013 16:33:58 +0000 (17:33 +0100)]
ALSA: hda/realtek - Generic mute LED implementation for HP laptops
As David Henningsson recently suggested, some HP laptops use an unused
mic pin for controlling a mute LED, and this information is provided
via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic
support for such cases, as we've already done in patch_sigmatel.c.
This is applied generically to all devices with ID 0x103c.
But as we don't know whether the device 103c:1586 really contains
HP_Mute_LED_X_Y DMI string, still keep the static setup for this
device using the mic2 pin 0x19.
Takashi Iwai [Thu, 10 Jan 2013 15:57:58 +0000 (16:57 +0100)]
ALSA: hda - Add output jack mode enum controls
Add the enum controls for changing the headphone amp bits of output
jacks, such as "Headphone Jack Mode". This feature isn't enabled as
default, so far, unless spec->add_out_jack_modes flag is set.
Takashi Iwai [Thu, 10 Jan 2013 15:10:06 +0000 (16:10 +0100)]
ALSA: hda - Update automute / automic upon jack retasking
When a multi-io jack is switched to another direction, call the
automute and autoswitch update functions, as this jack won't be used
as the headphone or the mic jack that may turn off others.
Takashi Iwai [Thu, 10 Jan 2013 09:18:14 +0000 (10:18 +0100)]
ALSA: hda - Add a new fixup type to override pinctl values
Add a new fixup type, HDA_FIXUP_PINCTLS, for overriding the pinctl
values of the given pins. It takes the same array of struct pintbl
like HDA_FIXUP_PINS, but each entry contains the pinctl value instead
of the pin default config value.
This patch also replaces the corresponding codes in patch_realtek.c.
Without this change, the direct call of verbs may be overridden again
by the later call of pinctl restoration by the driver.
Takashi Iwai [Thu, 10 Jan 2013 08:45:13 +0000 (09:45 +0100)]
ALSA: hda - Avoid auto-mute or auto-mic of retasked jacks
When a jack is retasked as a different direction (e.g. a mic jack is
used as a CLFE output), such a jack shouldn't be counted as the target
for the automatic jack switching. Skip the automute or the autoswitch
when the current pinctl direction is different from what we suppose.
Takashi Iwai [Thu, 10 Jan 2013 08:33:29 +0000 (09:33 +0100)]
ALSA: hda - Manage current pinctl values in generic parser
Use the new pin target accessors for managing the current pinctl
values in the generic parser. The pinctl values of all active pins
are once determined at the initialization phase, and stored via
snd_hda_codec_set_pin_target(). This will be referred again in the
codec init or resume phase to set the actual pinctl.
This value is kept while the auto-mute. When a line-out or a speaker
pin is muted by auto-mute, the driver simply disables the pin, but it
doesn't touch the cached pinctl target value. Upon unmute, this value
is used to restore the original pinctl in return.
Takashi Iwai [Thu, 10 Jan 2013 07:56:46 +0000 (08:56 +0100)]
ALSA: hda - More strict correction of invalid pinctl bits
Check more strictly about the validity of pinctl values in
snd_hda_set_pin_ctl() and correct the wrong bits automatically.
Also provide the helper function to correct pinctl bits to codec
drivers.
This automatically fixes the invalid pinctl writes that are found in
a few Realtek fixups for NID 0x0f amp like ASUS A6Rp.
Takashi Iwai [Wed, 9 Jan 2013 08:28:20 +0000 (09:28 +0100)]
ALSA: hda - Clear the dropped paths properly
When a DAC is reassigned from surrounds to front or ADCs are reduced
due to incomplete imux, we clear the path indices but the path
instances remain as is. Since the paths might be still referred
through the whole path list parsing (e.g. is_active_nid()), we should
clear these path instances as well.
Takashi Iwai [Wed, 9 Jan 2013 08:14:23 +0000 (09:14 +0100)]
ALSA: hda - Allow aamix as a capture source
Since some codecs can choose the aamix as a capture source, we should
support it as well. When spec->add_stereo_mix_input flag is set, the
parser checks the availability of aamix as the input source, and adds
the paths automatically when possible.
Takashi Iwai [Wed, 9 Jan 2013 08:06:18 +0000 (09:06 +0100)]
ALSA: hda - Fix inconsistent input_paths after ADC reduction
In the current parser code, the input_paths[] may become inconsistent
when some of detected ADCs are dropped due to incomplete inputs, since
the driver rearranges only adc_nids[] but doesn't touch input_paths[].
This patch fixes the issue, and also it optimizes the reachability
checks by simply referring to the parsed input_paths[] instead of
calling is_reachable() again for each connection.
Takashi Iwai [Wed, 9 Jan 2013 07:46:34 +0000 (08:46 +0100)]
ALSA: hda - Return "Headphone Mic" from hda_get_autocfg_input_label()
Instead of handling special cases in the caller side, give a proper
name string "Headphone Mic" from hda_get_autocfg_input_label() when
the headhpone jack pin is specified as an input.
Takashi Iwai [Mon, 7 Jan 2013 17:21:47 +0000 (18:21 +0100)]
ALSA: hda - Handle BOTH jack port as a fixed output
When the default config value shows the connection AC_JACK_PORT_BOTH,
it's better to handle it as a speaker pin. This makes the behavior
consistent in snd_hda_get_pin_label() and snd_hda_parse_pin_defcfg().
There are only few old machines showing this attribute, and all of
them are actually fixed speaker pins, as far as I know.
Takashi Iwai [Mon, 7 Jan 2013 16:25:08 +0000 (17:25 +0100)]
ALSA: hda - Re-define snd_hda_parse_nid_path()
This commit modifies the definition of snd_hda_parse_nid_path()
slightly, now with_aa_mix argument is changed to anchor_nid, so that
it can handle any NID generically as an anchor point to include or
exclude.
The with_aa_mix field in struct nid_path is removed again by this
change.
Takashi Iwai [Mon, 7 Jan 2013 15:44:06 +0000 (16:44 +0100)]
ALSA: hda - Fix multi-io channel mode management
The multi-io channels can vary not only from 1 to 6 but also may vary
from 6 to 8 or such. At the same time, there are more speaker pins
available than the primary output pins. So, we need three variables
to check: the minimum channel counts for primary outputs, the current
channel counts for primary outputs, and the minimum channel counts for
all outputs.
Takashi Iwai [Mon, 7 Jan 2013 14:11:44 +0000 (15:11 +0100)]
ALSA: hda - Use direct path reference in assign_out_path_ctls()
Instead of looking through paths with the dac -> pin connection at
each time, just pass the already parsed path index to
assign_out_path_ctls(). This simplifies the code a bit.
Takashi Iwai [Mon, 7 Jan 2013 14:07:00 +0000 (15:07 +0100)]
ALSA: hda - Clear path indices properly at each re-evaluation
The path indices must be reset at each evaluation of DAC assignment.
Otherwise the badness value will be wrongly calculated and mixers may
be inconsistently assigned.
Takashi Iwai [Mon, 7 Jan 2013 09:33:57 +0000 (10:33 +0100)]
ALSA: hda - Drop bind-volume workaround
The bind-volume workaround was introduced for simplifying the mixer
abstraction in the case where one or more pins of multiple outputs
lack of individual volume controls. This was essentially the case
like Acer Aspire 5935, which has 5.1 speakers and 5.1 (multi-io)
jacks although there are 5 DACs, so some of them must share a DAC.
However, the recent code rewrite changed the DAC assignment policy to
share with the same channel instead of binding to the front, thus
binding the volumes for all channels makes little sense now, rather
it's confusing. So in this patch, the ugly workaround is finally
dropped and simply create the volume control corresponding to the
parsed path position.
For dual headphones or 2.1 speakers with a shared volume control, it's
anyway bound to the same DAC if needed, so this change shouldn't bring
any practical difference.
And, as a good bonus, we can cut off the whole code handling the bind
volume elements.
Takashi Iwai [Mon, 7 Jan 2013 08:50:52 +0000 (09:50 +0100)]
ALSA: hda - Prefer binding the primary CLFE output
When 5.1 or more multiple speakers with found but not enough DACs are
available, it's better to bind such pins to the DACs of the primary
outputs with the same channels rather than binding to the first DAC
(i.e. the front channel). For the cases with two speaker pins, it's
rather regarded as front + bass combination, thus it's more practical
to still bind to the front, though.
Takashi Iwai [Mon, 7 Jan 2013 08:43:18 +0000 (09:43 +0100)]
ALSA: hda - Fix truncated control names
... like "Speaker Surround Playback Switch".
This fix had been already applied to patch_conexant.c but was
forgotten in other places, then migrated to hda_generic.c.
Takashi Iwai [Fri, 4 Jan 2013 15:42:48 +0000 (16:42 +0100)]
ALSA: hda - Add Loopback Mixing control
For codecs that have individual routes going through a loopback mixer
(like VIA codecs), we need to provide an explicit switch to choose
whether the output goes through mixer or directly from DAC.
This patch adds the check for such paths and creates "Loopback Mixing"
enum control when available.
It won't influence on codecs like Realtek or others where the loopback
mixer is connected independently from the primary output routes.
Takashi Iwai [Fri, 4 Jan 2013 14:41:41 +0000 (15:41 +0100)]
ALSA: hda - Correct aamix output paths
The output paths including aamix should be parsed only for the first
output. The surround paths including aamix must be wrong, since it
would mix all streams, i.e. all channels would be mixed into a single
and multiplexed again.
Takashi Iwai [Fri, 4 Jan 2013 14:01:40 +0000 (15:01 +0100)]
ALSA: hda - Manage using output/loopback path indices
Instead of search for the path with the certain route at each time,
keep the path index for each output and loopback, and just use it when
referred.
In this implementation, the path index number begins with one, not
zero (although I've been writing in C over decades). It's just to
make the check for uninitialized values easier.
So far, the input paths aren't handled with indices yet, but still
picked up via snd_hda_get_nid_path() at each time.
Takashi Iwai [Fri, 4 Jan 2013 13:50:04 +0000 (14:50 +0100)]
ALSA: hda - Simplify the multi-io assignment with multi speakers
When speakers are chosen as the the primary output during evaluation,
we did some tricks to assign the possible multi-io jacks with a
certain offset value to multi_out dacs. This was a workaround for the
case with multiple speakers like Acer Aspire. But this is quite ugly
at the same time and the resultant code is hard to understand. More
badly, it works wrongly for 2.1 speakers like Apple iMac91.
In this patch, instead of fiddling with the offset to multi_out dacs,
simply add a certain badness number if headphone(s) + multi-ios are
possible. This simplify the code a bit, and it's more robust.
Takashi Iwai [Fri, 4 Jan 2013 11:56:52 +0000 (12:56 +0100)]
ALSA: hda - Avoid duplicated path creations
When the paths are created in map_singles(), we don't have to
re-create new paths in try_assign_dacs(). Just evaluate the badness
and skip to the next item.
Takashi Iwai [Thu, 3 Jan 2013 15:33:02 +0000 (16:33 +0100)]
ALSA: hda - Initialize output paths with current active states
Set path->active flag at the path creation time and let the paths
initialized according to the current path->active state in
set_output_and_unmute(). This allows to modify the active flag of
some output paths dynamically, e.g. switching the front output route
with or without aamix like patch_via.c.
Takashi Iwai [Thu, 3 Jan 2013 15:30:04 +0000 (16:30 +0100)]
ALSA: hda - Don't skip amp init for activated paths
activate_amp() in the generic parser checks whether the given NID is
included in any active paths and skips it if found. This was a
workaround for avoiding disabling the widgets in the active paths when
one path is disabled, thus it shouldn't be applied to the case for
path activation. Due to this wrong check, some analog loopback paths
haven't been initialized correctly.
Takashi Iwai [Thu, 3 Jan 2013 14:25:11 +0000 (15:25 +0100)]
ALSA: hda - Revive snd_hda_get_conn_list()
Manage the connection list cache using linked lists instead of
snd_array, and revive snd_hda_get_conn_list() again, so that we don't
have to keep the expanded values locally.
This will reduce the stack usage by recursive call of
snd_hda_get_conn_index() or parse_nid_path() of the generic parser.
The list management doesn't include any mutex protection, thus the
caller needs to take care of race appropriately.
Takashi Iwai [Fri, 21 Dec 2012 13:09:42 +0000 (14:09 +0100)]
ALSA: hda - Implement independent HP control
Similar like the implementation in patch_analog.c and patch_via.c,
the generic parser can provide the independent HP PCM stream now.
It's enabled when spec->indep_hp is set by the caller while parsing.
Currently no dynamic PCM switching as in patch_via.c is implemented
yet. The control returns -EBUSY when the value is changed during PCM
operations.
Takashi Iwai [Thu, 20 Dec 2012 15:58:39 +0000 (16:58 +0100)]
ALSA: hda - Fix PCM name string for generic parser
When a PCM name string is generated from the chip name, it might
become strange like "CX20549 (Venice) Analog". In this patch, the
parser tries to drop the invalid words like "(Venice)" in the PCM name
string. Also, when the name string is given beforehand by the caller,
respect it and use it as is.
Takashi Iwai [Thu, 20 Dec 2012 14:29:21 +0000 (15:29 +0100)]
ALSA: hda - Fix initialization of primary outputs in hda_generic.c
There were some old codes that look not stable enough, which was
derived from the old Realtek code. The initialization for primary
output in init_multi_out() needs to consider the case of shared DAC.
Takashi Iwai [Thu, 20 Dec 2012 14:16:09 +0000 (15:16 +0100)]
ALSA: hda - Clear unsol enable bits on unused pins in generic parser
For preliminary works to migrate the generic parser for Conexant
codecs: the same function is ported to hda_generic.c.
But now it looks through the jack detect table so that it can cover
better.
Takashi Iwai [Thu, 20 Dec 2012 13:57:18 +0000 (14:57 +0100)]
ALSA: hda - Add spec->vmaster_mute_enum flag to generic parser
Add a flag to indicate whether the vmaster mute hook enum is exposed
or not. Conexant codecs may want not to expose the control depending
on the model.
Takashi Iwai [Thu, 20 Dec 2012 13:42:42 +0000 (14:42 +0100)]
ALSA: hda - Increase the max depth of widget connections
Old codecs like AD1986A tend to have long paths as they were just made
to be the way like AC97. The current max depth 5 can be too short for
such devices.
Takashi Iwai [Thu, 20 Dec 2012 11:54:18 +0000 (12:54 +0100)]
ALSA: hda - Fix wrong dirty check in snd_hda_codec_resume_amp()
The dirty entry has to be checked at the beginning in the loop, not in
the inner loop for channels. This caused a regression that the right
channel isn't properly written.
The inverted dmic fix overwrites the right channel amp value, but it
would work only when the amp values have been already actually
written. Put snd_hda_codec_resume_amp() before the amp write for
flushing caches.
Takashi Iwai [Thu, 20 Dec 2012 10:17:17 +0000 (11:17 +0100)]
ALSA: hda - Check CORB overflow
Add an overflow check of CORB in HD-audio controller and codec drivers
so that flood of sequential writes would work properly.
In the controller side, add a check of CORB read-pointer to make
returning -EAGAIN when it's full. Meanwhile in the codec side, when
-EAGAIN error is received, it retries the write after flushing the
pending verbs (calling get_response() essentially does it).
Takashi Iwai [Thu, 20 Dec 2012 10:02:00 +0000 (11:02 +0100)]
ALSA: hda - Clear cached_write flag in snd_hda_codec_resume_*()
These functions are supposed to be called at finishing the cached
sequential writes, so clear the flag properly for lazy developers who
often forget details.
Takashi Iwai [Thu, 20 Dec 2012 10:00:21 +0000 (11:00 +0100)]
ALSA: hda - Clear dirty flag upon cache write
When verbs or amps are actually written to the hardware, we can clear
dirty flag so that the later snd_hda_codec_resume_*() calls can skip
these verbs / amps.
Takashi Iwai [Thu, 20 Dec 2012 09:45:55 +0000 (10:45 +0100)]
ALSA: hda - Allow one chance for zero NID in connection list
The commit [2e9bf24: ALSA: hda_codec: Check for invalid zero
connections] trims the whole connection list when an invalid value is
reported by the hardware. But some codecs (at least AD1986A) may give
a zero NID in the middle of the connection list, so dropping the whole
list isn't good for such cases.
In this patch, as a workaround, allow a single zero NID in the read
connection list. If it hits zero twice, it's handled as an error, so
that we can avoid "too many connections" errors.
Takashi Iwai [Wed, 19 Dec 2012 16:41:52 +0000 (17:41 +0100)]
ALSA: hda - Use "Capture Source" for single sources
In general we prefer "Capture Source" to "Input Source".
The latter was chosen in many places just because "Capture Source"
label doesn't work well with the current alsa-lib mixer abstraction
when multiple instances are present. But when we know that there is a
single input-source element, we can safely choose "Capture Source"
label.
Takashi Iwai [Wed, 19 Dec 2012 14:22:24 +0000 (15:22 +0100)]
ALSA: hda - Use generic parser codes for Realtek driver
The next migration step is to use the common code in generic driver
for Realtek driver. This is no drastic change and there should be no
real functional changes, as the generic parser code comes from Realtek
driver originally.
As Realtek driver requires the generic parser code, it needs a
reverse-selection of CONFIG_SND_HDA_GENERIC kconfig.
Takashi Iwai [Wed, 19 Dec 2012 14:15:10 +0000 (15:15 +0100)]
ALSA: hda - Fix NULL dereference in snd_hda_gen_build_controls()
When no controls are assigned in the parser (e.g. no analog path),
spec->kctls.list is still NULL. We need to check it before passing to
snd_hda_add_new_ctls().