staging: comedi: pcl816: factor out the "next ai chan" code
Factor out the code that bumps the counters in the private data that keep
track of what channel is being samples next and when all the data has been
sampled.
Don't clear the events in the driver. The comedi core will clear the events
at the end of the comedi_event().
Make sure the COMEDI_CB_BLOCK event is set when advancing to the next
channel so that when the comedi_event() is finally called the core will
wake the async_queue to return the analog input data.
Also, make sure the COMEDI_CB_EOS event is set at the completion of each
scan.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl812: factor out the common "next ai chan" code
The DMA and EOC interrupt handlers all have common code that bumps the
counters in the private data that keep track of what channel is being
sampled next and when all the data has been sampled.
Factor this common code into a helper function.
Don't clear the events in the driver. The comedi core will clear the events
at the end of the comedi_event().
Make sure the COMEDI_CB_BLOCK event is set when advancing to the next
channel so that when the comedi_event() is finally called the core will
wake the async_queue to return the analog input data.
Also, make sure the COMEDI_CB_EOS event is set at the completion of each
scan.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl816: only hook up async command support if DMA is available
This driver only supports async commands if a DMA channel is available. Modify
the subdevice init so that the command support only gets hooked up if we can
do DMA.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the users manual, when using interrupt (non-DMA) transfers
this hardware generates an interrupt at the start of a conversion. This
requires the interrupt routine to busywait until the end-of-conversion.
It appears this was unreliable and interrupt only async command support
was removed at some time. Async command support is still available when
DMA is used.
Remove the unreachable interrupt only handler code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl818: interrupt handlers should not busywait
The interrupt is only generated by the hardware at the completion of
an A/D conversion. Because of this the sanity check to make sure that
the A/D conversion is complete and data is available is probably
unnecessary but it doesn't hurt anything.
The busywait loop is a different issue. Interrupt routines should not
busywait. That's just mean...
Remove the bustwait and use pcl818_ai_eoc() to check for the end-of-
conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl812: interrupt handlers should not busywait
The interrupt is only generated by the hardware at the completion of
an A/D conversion. Because of this the sanity check to make sure that
the A/D conversion is complete and data is available is probably
unnecessary but it doesn't hurt anything.
The busywait loop is a different issue. Interrupt routines should not
busywait. That's just mean...
Remove the bustwait and use pcl812_ai_eoc() to check for the end-of-
conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl818: fix board resource region request
Some of the PCL-818 compatible boards have a FIFO that can be used
when running analog input async commands. This FIFO increased the
resource range used by the driver.
Request the correct resources used by the board even if the FIFO is
not used. This prevents another driver from trying to use the I/O
space.
Modify the attach so that the 'usefifo' flag is only set if we have
and IRQ, the board has a FIFO, and the user wahts to use it.
Fix pcl818_reset() so that the FIFO is always flushed and disabled
if it exists.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function is a _very_ simplified probe that tried to verify that
the driver is being attached to a PCL-818 compatible board. The function
simply writes some values to specific registers then reads back the
values to see if they are the same.
It's possible that the user could try to attach this driver to a non-
compatible board but the check would still pass depending on the register
map of the board.
Just remove the buggy function to simplify the attach a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function is a _very_ simplified probe that tried to verify that
the driver is being attached to a PCL-816 compatible board. The function
simply writes some values to specific registers then reads back the
values to see if they are the same.
It's possible that the user could try to attach this driver to a non-
compatible board but the check would still pass depending on the register
map of the board.
Just remove the buggy function to simplify the attach a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Hounschell [Thu, 6 Mar 2014 20:25:19 +0000 (15:25 -0500)]
staging: dgap: Simplify and cleanup dgap_init_module function
This patch simplifies and cleans up the dgap_init_module function. It also fixes
a possible double free condition as a result pci_unregister_driver possibly
being called twice.
Signed-off-by: Mark Hounschell <markh@compro.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Hounschell [Thu, 6 Mar 2014 18:57:55 +0000 (13:57 -0500)]
staging: dgap: Remove printks associated with sysfile creation
This patch removes printks associated with sysfile creation
and changes the dgap_create_driver_sysfiles function to return
an int so we can check for errors in the sysfile creation
process.
The printk's were flagged by checkpatch but then
driver_create_file was flagged by checkpatch for
not checking its return. So we remove the printk's
and check the return of driver_create_file.
Signed-off-by: Mark Hounschell <markh@compro.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Hounschell [Thu, 6 Mar 2014 18:03:33 +0000 (13:03 -0500)]
staging: dgap: Remove some dead code
This patch removes more dead code and code associated
with that dead code. The from_user variable in the
dgap_tty_write function was never true. The code under
its test was never being executed. So variables and
functions supporting only that code are also dead.
Signed-off-by: Mark Hounschell <markh@compro.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Hounschell [Tue, 4 Mar 2014 21:03:09 +0000 (16:03 -0500)]
staging: dgap: Remove module param and sysfs var rawreadok
This patch removes the rawreadok module param and sysfs var
previously used to enable flip buffer bypass. Code dealing
with that param was removed previously.
Signed-off-by: Mark Hounschell <markh@compro.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shaun Laing [Thu, 6 Mar 2014 15:26:14 +0000 (08:26 -0700)]
staging: cxt1e1: removed version string declaration
Removed the unneeded pmcc4_OSSI_release version string, as well as the now
unused 'release' element of the sbe_card_info struct. This also resolves a
sparse "should it be static" warning.
Dan Carpenter [Wed, 5 Mar 2014 08:43:19 +0000 (11:43 +0300)]
Staging: rtl8712: fix an error test in start_drv_threads()
Testing for "if (IS_ERR(padapter->cmdThread) < 0)" doesn't make sense.
The kthread_run() function returns error pointers on error pointers on
error so it should just be "if (IS_ERR(padapter->cmdThread))".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'iio-for-3.15c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Third IIO new drivers and cleanups series for 3.15.
New driver
* Xilinx XADC driver - This has been ready for a while but was awaiting
a device tree ack (or as it turns out 3+ weeks).
Cleanup
* Drop some unreachable code from mag3110 highlighted by smatch.
Fix
* vf610 - introduced this cycle - put a possible negative error code
into an unsigned long. Another smatch find - this one promoted by
guilt that Dan was busy fixing all our messups.
The function rtl8180_wmm_param_update contained two blocks of code which
were nearly identical. This patch combines those two blocks into a
single function, to reduce code duplication, and do fix some
checkpatch.pl warnings about excessively long lines due to the large
number of indents that were needed for the original blocks of code.
Signed-off-by: Axel Rasmussen <axel.rasmussen1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The definition of the driver's ChannelPlan array produced a large number
of checkpatch.pl errors. This patch fixes all of them by adding spaces
and wrapping the resulting overly-long lines.
Signed-off-by: Axel Rasmussen <axel.rasmussen1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ken Cox [Tue, 4 Mar 2014 13:58:11 +0000 (07:58 -0600)]
staging: virthba driver to access shared SCSI hba
The virthba module provides access to a shared SCSI host bus adapter
and one or more disk devices, by proxying SCSI commands between the
guest and the service partition that owns the shared SCSI adapter,
using a channel between the guest and the service partition. The disks
that appear on the shared bus are defined by the s-Par configuration
and enforced by the service partition, while the guest driver handles
sending commands and handling responses. Each disk is shared as a
whole to a guest. Sharing the bus adapter in this way provides
resiliency; should the device encounter an error, only the service
partition is rebooted, and the device is reinitialized. This allows
guests to continue running and to recover from the error.
Signed-off-by: Ken Cox <jkc@redhat.com> Cc: Ben Romer <sparmaintainer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ken Cox [Tue, 4 Mar 2014 13:58:07 +0000 (07:58 -0600)]
staging: visorchipset driver to provide registration and other services
The visorchipset module receives device creation and destruction
events from the Command service partition of s-Par, as well as
controlling registration of shared device drivers with the s-Par
driver core. The events received are used to populate other s-Par
modules with their assigned shared devices. Visorchipset is required
for shared device drivers to function properly. Visorchipset also
stores information for handling dump disk device creation during
kdump.
In operation, the visorchipset module processes device creation and
destruction messages sent by s-Par's Command service partition through
a channel. These messages result in creation (or destruction) of each
virtual bus and virtual device. Each bus and device is also associated
with a communication channel, which is used to communicate with one or
more IO service partitions to perform device IO on behalf of the
guest.
Signed-off-by: Ken Cox <jkc@redhat.com> Cc: Ben Romer <sparmaintainer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ken Cox [Tue, 4 Mar 2014 13:58:05 +0000 (07:58 -0600)]
staging: visorutil driver to provide common functionality to other s-Par drivers
The visorutil module is a support library required by all other s-Par
driver modules. Among its features it abstracts reading, writing, and
manipulating a block of memory.
Signed-off-by: Ken Cox <jkc@redhat.com> Cc: Ben Romer <sparmaintainer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Surendra Patil [Tue, 4 Mar 2014 07:57:47 +0000 (23:57 -0800)]
drivers:staging:ozwpan Replaced wrapper functions with actual spin lock function
* Replaced all the spin lock/unlock wrappers from oz_polling_lock_bh()
and oz_polllin_unlock_bh() with spin_lock_bh(&g_polling_lock) and
spin_unlock_bh(&g_polling_lock).Completely erased the wrappers defination
and declaration.
* declared g_polling_lock as global variable in header file and added comments to it.
Module builded successfully with sparse without warnings.
Aaro Koskinen [Sat, 1 Mar 2014 22:09:05 +0000 (00:09 +0200)]
staging: octeon-ethernet: drop CONFIG_CAVIUM_OCTEON_NUM_PACKET_BUFFERS
We don't have such Kconfig option, so the current code is dead and
the documentation is wrong. Users can adjust this setting by using
module parameter or kernel command line, so we can delete this code.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi core expects the (*insn_write) functions to write insn->n
values. Fix this function to work like the core expects.
The counters are actually 25-bit (24-bits + 1 sign bit). The comedi core
validates that all the data is in range before calling the (*insn_write),
fix the subdevice maxdata so that the sign bit can actually be changed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This define is only used in the pci_device_id table and does not add
any significant clarity to the code. Remove the define and just open
code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shaun Laing [Tue, 4 Mar 2014 19:44:21 +0000 (12:44 -0700)]
staging: cxt1e1: Add extern keyword for sparse 'static' warning
Resolve sparse "warning: symbol '...' was not declared. Should it be static?"
messages. Includes "comet_tables.h", which contains extern declarations for
the variables defined in comet_tables.c.
Masood Mehmood [Sat, 1 Mar 2014 11:57:02 +0000 (03:57 -0800)]
Staging:tidspbridge: Fixed braces, spaces and long line coding style
This patch applies following code style changes to the whole driver.
- Removing braces from single statements following a 'if' statement.
- Removing unnessasary spaces and braces from files.
- Re-order statements crossing 80 columns limitation.
- Fixed one quoted string split across lines.
Shuah Khan [Mon, 3 Mar 2014 23:38:45 +0000 (16:38 -0700)]
staging/usbip: change usbip userspace to include new uapi usbip.h
usbip userspace has duplicated enum definition to report usbip device
status maintained by the kernel. A new uapi usbip.h now defines the
usbip device status for kernel and userspace to use. Change usbip
userspace to include uapi usbip.h for usbip device status.
Shuah Khan [Mon, 3 Mar 2014 23:38:44 +0000 (16:38 -0700)]
staging/usbip: change usbip to include new uapi usbip.h
usbip userspace has duplicated enum definition to report usbip device
status maintained by the kernel. A new uapi usbip.h now defines the
usbip device status for kernel and userspace to use. Change usbip
kernel space to include uapi usbip.h for usbip device status.
Shuah Khan [Mon, 3 Mar 2014 23:38:43 +0000 (16:38 -0700)]
staging/usbip: add uapi header to export usbip kernel interfaces
usbip userspace has duplicated enum definition to report usbip device
status maintained by the kernel. Adding an usbip uapi header file will
define the kernel - userspace interface for this device status. This
new uapi file is added under usbip/uapi to keep the staging tree code
self-contained. When usbip moves to mainline drivers, this file should
be moved under uapi/linux
Linus Torvalds [Sun, 2 Mar 2014 23:15:07 +0000 (15:15 -0800)]
Merge tag 'usb-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are 2 USB patches for 3.14-rc5, one a new device id, and the
other fixes a reported problem with threaded irqs and the USB EHCI
driver"
* tag 'usb-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: ehci: fix deadlock when threadirqs option is used
USB: ftdi_sio: add Cressi Leonardo PID
Linus Torvalds [Sun, 2 Mar 2014 23:12:54 +0000 (15:12 -0800)]
Merge tag 'staging-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree fixes from Greg KH:
"Here are a few IIO fixes, and a new device id for a staging driver for
3.14-rc5. All have been in linux-next for a while, I did a final
merge to get the IIO fixes into this tree, they were incorrectly in
the char-misc tree for a few weeks, and I forgot to tell you to pull
them from there. This makes it a single pull request for you"
* tag 'staging-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: Add new device ID
staging:iio:adc:MXS:LRADC: fix touchscreen statemachine
iio:gyro: bug on L3GD20H gyroscope support
iio: cm32181: Change cm32181 ambient light sensor driver
iio: cm36651: Fix read/write integration time function.
Dave Airlie [Sun, 2 Mar 2014 23:04:41 +0000 (09:04 +1000)]
Merge branch 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
more radeon fixes
* 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: enable speaker allocation setup on dce3.2
drm/radeon: change audio enable logic
drm/radeon: fix audio disable on dce6+
drm/radeon: free uvd ring on unload
drm/radeon: disable pll sharing for DP on DCE4.1
drm/radeon: fix missing bo reservation
drm/radeon: print the supported atpx function mask
Dave Airlie [Sun, 2 Mar 2014 10:54:31 +0000 (20:54 +1000)]
Merge tag 'vmwgfx-fixes-3.14-2014-03-02' of git://people.freedesktop.org/~thomash/linux into drm-fixes
A couple of minor fixes.
Pull request of 2014-03-02
* tag 'vmwgfx-fixes-3.14-2014-03-02' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: avoid null pointer dereference at failure paths
drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
drm/vmwgfx: Remove some unused surface formats
drm/vmwgfx: avoid null pointer dereference at failure paths
vmw_takedown_otable_base() and vmw_mob_unbind() check for
potential vmw_fifo_reserve() failure and print error message,
but then immediately dereference NULL pointer.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Thomas Hellstrom [Fri, 28 Feb 2014 12:33:21 +0000 (13:33 +0100)]
drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
Backing mob contents is propagated to user-space, so make sure backing
mobs are cleared when allocated. This also accidently fix rendering errors
with celestia when emulating legacy mode.
Also update driver date.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
projects / karo-tx-linux.git / log