Takashi Iwai [Wed, 20 Nov 2013 11:15:07 +0000 (12:15 +0100)]
ALSA: hda - Fix unbalanced runtime PM notification at resume
When a codec is resumed, it keeps the power on while the resuming
phase via hda_keep_power_on(), then turns down via
snd_hda_power_down(). At that point, snd_hda_power_down() notifies
the power down to the controller, and this may confuse the refcount if
the codec was already powered up before the resume.
In the end result, the controller goes to runtime suspend even before
the codec is kicked off to the power save, and the communication
stalls happens.
The fix is to add the power-up notification together with
hda_keep_power_on(), and clears the flag appropriately.
You're looking at a casual headset patch,
for a specific hardware it will match,
and suddenly, the headset jack will work,
so please apply this simple quirk!
BugLink: https://bugs.launchpad.net/bugs/1253038 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Sakamoto [Tue, 19 Nov 2013 04:29:24 +0000 (13:29 +0900)]
ALSA: firewire-lib: include sound/asound.h to refer to snd_pcm_format_t
'snd_pcm_format_t' is used by amdtp_out_stream_set_pcm_format().
Currently, when just including amdtp.h, compiler cannot find this type because
this type is defined in uapi/sound/asound.h and this header is not included by
amdtp.h.
ALSA: hda - Enable mute/mic-mute LEDs for more Thinkpads with Realtek codec
We're using the ACPI interface to detect whether we're dealing with a Thinkpad
or not. This way we're not loading the thinkpad_acpi module when we're not on
a Thinkpad, but at the same time, we give the opportunity to check for, and
potentially enable, both present and future Thinkpad with mute/micmute LEDs.
At least those running the ALC269 family (269 to 299) of Realtek codecs.
Cc: Alex Hung <alex.hung@canonical.com> Tested-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 14 Nov 2013 14:35:46 +0000 (15:35 +0100)]
ALSA: jack: Unregister input device at disconnection
The recent change in sysfs triggered a kernel WARNING at unloading a
sound driver like
WARNING: CPU: 3 PID: 2247 at fs/sysfs/group.c:214 sysfs_remove_group+0xe8/0xf0()
sysfs group ffffffff81ab7b20 not found for kobject 'event14'
for each jack instance. It's because the unregistration of jack input
device is done in dev_free callback, which is called after
snd_card_disconnect(). Since device_unregister(card->card_dev) is
called in snd_card_disconnect(), the whole sysfs entries belonging to
card->card_dev have been already removed recursively. Thus this
results in a warning as input_unregister_device() yet tries to
unregister the already removed sysfs entry.
For fixing this mess, we need to unregister the jack input device at
dev_disconnect callback so that it's called before unregistering the
card->card_dev.
Reviwed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oskar Schirmer [Tue, 12 Nov 2013 15:46:38 +0000 (15:46 +0000)]
ASoC: fsl: imx-pcm-fiq: omit fiq counter to avoid harm in unbalanced situations
Unbalanced calls to snd_imx_pcm_trigger() may result in endless
FIQ activity and thus provoke eternal sound. While on the first glance,
the switch statement looks pretty symmetric, the SUSPEND/RESUME
pair is not: the suspend case comes along snd_pcm_suspend_all(),
which for fsl/imx-pcm-fiq is called only at snd_soc_suspend(),
but the resume case originates straight from the SNDRV_PCM_IOCTL_RESUME.
This way userland may provoke an unbalanced resume, which might cause
the fiq_enable counter to increase and never return to zero again,
so eventually imx_pcm_fiq is never disabled.
Simply removing the fiq_enable will solve the problem, as long as
one never goes play and capture game simultaneously, but beware
trying both at once, the early TRIGGER_STOP will cut off the other
activity prematurely. So now playing and capturing is scrutinized
separately, instead of by counting.
Signed-off-by: Oskar Schirmer <oskar@scara.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
Takashi Iwai [Wed, 13 Nov 2013 15:58:10 +0000 (16:58 +0100)]
ALSA: hda - Don't clear the power state at snd_hda_codec_reset()
snd_hda_codec_reset() is called either in resetting the whole setup at
error paths or hwdep clear/reconfig sysfs triggers. But all of these
don't assume that the power has to be off, rather they want to keep
the power state unchanged (e.g. reconfig_codec() calls the power
up/down by itself). Thus, unconditionally clearing the power state in
snd_hda_codec_reset() leads to the inconsistency, confuses the further
operation. This patch gets rid of the lines doing that bad thing.
Takashi Iwai [Wed, 13 Nov 2013 08:42:56 +0000 (09:42 +0100)]
ALSA: hda - Control EAPD for Master volume on Lenovo N100
Similarly as other laptops with AD1981 & co codecs, we can control
EAPD on AD1986A more safely depending on the Master switch, in order
to save some power.
Takashi Iwai [Wed, 13 Nov 2013 08:39:08 +0000 (09:39 +0100)]
ALSA: hda - Don't turn off EAPD for headphone on Lenovo N100
The only EAPD on AD1986A is on NID 0x1b where usually the speaker.
But this doesn't control only the speaker amp but may influence on all
outputs, e.g. Lenovo N100 laptop seems to have this issue.
Takashi Iwai [Tue, 12 Nov 2013 10:36:00 +0000 (11:36 +0100)]
ALSA: hda - Check keep_eapd_on before inv_eapd
We don't change the EAPD bit in set_pin_eapd() if keep_eapd_on flag is
set by the codec driver and enable is false. But, we also apply the
flipping of enable value according to inv_eapd flag in the same
function, and this confused the former check, handled as if it's
turned ON. The inverted EAPD check must be applied after keep_eapd_on
check, instead.
ALSA: hda - Fix Line Out automute on Realtek multifunction jacks
In case there is both a multifunction headset jack and a Line Out
jack, automuting was not working properly from the Line Out jack.
This patch fixes that issue.
Cc: stable@vger.kernel.org (3.10+) BugLink: https://bugs.launchpad.net/bugs/1250377 Tested-by: Cyrus Lien <cyrus.lien@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 12 Nov 2013 07:06:20 +0000 (08:06 +0100)]
ALSA: msnd: Avoid duplicated driver name
msnd_pinnacle.c is used for both snd-msnd-pinnacle and
snd-msnd-classic drivers, and both should have different driver
names. Using the same driver name results in the sysfs warning for
duplicated entries like
kobject: 'msnd-pinnacle.7' (cec33408): kobject_release, parent (null) (delayed)
kobject: 'msnd-pinnacle' (cecd4980): kobject_release, parent cf3ad9b0 (delayed)
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:486 sysfs_warn_dup+0x7d/0xa0()
sysfs: cannot create duplicate filename '/bus/isa/drivers/msnd-pinnacle'
......
ALSA: compress_core: don't return -EBADFD from poll if paused
Pausing audio playback is not an illegal state so it doesn't
seem sensible for poll() to return -EBADFD on a paused stream.
There's also no reason to assume that we can't write more data
to the DSP while playback is paused. Remove the -EBADFD so that
a stream in paused state will still report the buffer
availability from poll(). It is up to the user process to
manage its state so that it knows whether it is paused or not.
The ATI/AMD video/audio latencies are specified in apparent HDMI VSDB
format. In this format values above 251 are not valid (or stream
component is not supported - 255), but no checking is performed since
this was not mentioned in the AMD HDA verbs specification.
Check that the latencies are valid before using them, and add a comment
describing the formats.
Anssi Hannula [Sun, 10 Nov 2013 18:56:10 +0000 (20:56 +0200)]
ALSA: hda - hdmi: Add error-checking to some codec reads
Add error checks to HBR status reads (both generic and ATI/AMD) and
ATI/AMD codec reads for ELD generation.
Unchecked errors in these just caused more errors later on (invalid
codec writes for the HBR ones and ELD parsing errors for the ATI/AMD ELD
ones), but it is better to catch them earlier.
Anssi Hannula [Sun, 10 Nov 2013 19:24:05 +0000 (21:24 +0200)]
ALSA: usb: Fix wrong mapping of RLC and RRC channels
According to USB Audio spec v2 bits 25 and 26 of bmChannelConfig are
"Back Left of Center - BLC" and "Back Right of Center - BRC",
respectively.
They are currently assigned to ALSA channels BLC/BRC. However, the ALSA
BLC/BRC are actually the rather nonsensical "bottom left center" and
"bottom right center", so the channels will be assigned wrongly. The
comments in the USB code are also similarly wrong, so this is not
readily apparent without looking at the actual specification.
Fix the channel mapping by mapping bits 25 and 26 to RLC (Rear Left
Center) and RRC (Rear Right Center), respectively, instead.
Anssi Hannula [Sun, 10 Nov 2013 19:24:04 +0000 (21:24 +0200)]
ALSA: hda - hdmi: Use TFx channel positions instead of FxH
Channel map positions FLH, FCH, FRH duplicate positions TFL, TFC, TFR.
Both are the speakers above the front speakers (CEA uses "high" and USB
audio uses "top" nomenclature).
Since the USB audio code has used the TFx positions since v3.8
(04324ccc75f96, "ALSA: usb-audio: add channel map support") but the HDMI
code only just started using FxH in a5b7d510b2220cccb ("ALSA: hda -
hdmi: Fix channel maps with less common speakers") which is not yet in
any released kernel, standardize on TFx instead.
Takashi Iwai [Fri, 8 Nov 2013 12:03:57 +0000 (13:03 +0100)]
ALSA: hda - Control SPDIF out pin on MacBookPro 11,2
The SPDIF output MBP11,2 requires the pin control to be set/cleared
for turning on/off the optical SPDIF. The red light turns off only
when the corresponding pin control is cleared (or powered to D3).
Takashi Iwai [Fri, 8 Nov 2013 11:50:31 +0000 (12:50 +0100)]
ALSA: hda - Apply MacBook fixups for CS4208 correctly
The commit [8fe7b65ab465: ALSA: hda - Apply GPIO setup for MacBooks
with CS4208] added a fixup entry matching with the vendor id 0x106b.
This broke the fixups for previous MBA6,1 and 6,2, since the PCI SSID
vendor id matches before evaluating the codec SSIDs.
We had a similar issue on Mac with Sigmatel codecs, and solve this
problem again similarly, by introducing a skeleton entry matching with
the all MacBooks, then remap to the right one.
Kailang Yang [Fri, 1 Nov 2013 07:57:35 +0000 (15:57 +0800)]
ALSA: hda/realtek - Make fixup regs persist after resume
Upon suspend / resume, the fixup register settings are lost because
sending HDA_FIXUP_ACT_PRE_PROBE is not part of the resume path. Instead,
write our registers in response to the HDA_FIXUP_ACT_INIT, which happens
after initial probe and upon resume.
Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
projects / karo-tx-linux.git / log