David S. Miller [Mon, 21 Oct 2013 22:50:21 +0000 (18:50 -0400)]
Merge branch 'sit_tso'
Eric Dumazet says:
====================
ipv6: sit: Implement TSO/GSO support
This patch series implements GSO/TSO support for SIT tunnels
Broadcom bnx2x driver is now enabled for TSO support of SIT traffic
Before patches :
lpq84:~# ./netperf -H 2002:af6:1153:: -Cc
MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
lpq84:~# ./netperf -H 2002:af6:1153:: -Cc
MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
Eric Dumazet [Mon, 21 Oct 2013 03:47:31 +0000 (20:47 -0700)]
bnx2x: add TSO support for SIT tunnels
bnx2x driver already handles TSO for GRE and IPIP, current code
is the same for SIT.
Performance results : (Note we are now limited by receiver,
as it does not support GRO for SIT yet)
Before patch :
lpq84:~# ./netperf -H 2002:af6:1153:: -Cc
MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
lpq84:~# ./netperf -H 2002:af6:1153:: -Cc
MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
Eric Dumazet [Mon, 21 Oct 2013 03:47:30 +0000 (20:47 -0700)]
ipv6: sit: add GSO/TSO support
Now ipv6_gso_segment() is stackable, its relatively easy to
implement GSO/TSO support for SIT tunnels
Performance results, when segmentation is done after tunnel
device (as no NIC is yet enabled for TSO SIT support) :
Before patch :
lpq84:~# ./netperf -H 2002:af6:1153:: -Cc
MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
lpq84:~# ./netperf -H 2002:af6:1153:: -Cc
MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
This patch removes a duplicate define in drivers/atm/firestream.h
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 21 Oct 2013 22:43:46 +0000 (18:43 -0400)]
Merge branch 'pernet_sysctls'
Eric W. Biederman says:
====================
ipv4: tcp_memcontrol and userns sysctls
While looking into allowing the ipv4 sysctls to be used in a network
namespace I stumbled upon the mess that is tcp_memcontrol.
I remove the dead code, broken code, and excessive abstraction in the
tcp_memcontrols then I clean up up and allow in the user namespace the
per net ipv4 sysctls.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv4: Use math to point per net sysctls into the appropriate struct net.
Simplify maintenance of ipv4_net_table by using math to point the per
net sysctls into the appropriate struct net, instead of manually
reassinging all of the variables into hard coded table slots.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The code that is implemented is per memory cgroup not per netns, and
having per netns bits is just confusing. Remove the per netns bits to
make it easier to see what is really going on.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_memcontrol: Remove setting cgroup settings via sysctl
The code is broken and does not constrain sysctl_tcp_mem as
tcp_update_limit does. With the result that it allows the cgroup tcp
memory limits to be bypassed.
The semantics are broken as the settings are not per netns and are in a
per netns table, and instead looks at current.
Since the code is broken in both design and implementation and does not
implement the functionality for which it was written remove it.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 21 Oct 2013 21:21:39 +0000 (17:21 -0400)]
Merge branch 'pci_set_drvdata'
Jingoo Han says:
====================
net: ethernet: remove unnecessary pci_set_drvdata() part 2
Since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d
(device-core: Ensure drvdata = NULL when no driver is bound),
the driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jingoo Han [Mon, 21 Oct 2013 02:14:23 +0000 (11:14 +0900)]
net: sky2: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jingoo Han [Mon, 21 Oct 2013 02:13:58 +0000 (11:13 +0900)]
net: skge: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jingoo Han [Mon, 21 Oct 2013 02:13:33 +0000 (11:13 +0900)]
net: jme: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jingoo Han [Mon, 21 Oct 2013 02:13:07 +0000 (11:13 +0900)]
net: e100: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jingoo Han [Mon, 21 Oct 2013 02:12:38 +0000 (11:12 +0900)]
net: icplus: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jingoo Han [Mon, 21 Oct 2013 02:12:15 +0000 (11:12 +0900)]
net: fealnx: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jingoo Han [Mon, 21 Oct 2013 02:11:44 +0000 (11:11 +0900)]
net: be2net: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jingoo Han [Mon, 21 Oct 2013 02:11:14 +0000 (11:11 +0900)]
net: dl2k: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jingoo Han [Mon, 21 Oct 2013 02:09:26 +0000 (11:09 +0900)]
net: tulip: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Sun, 20 Oct 2013 05:05:31 +0000 (22:05 -0700)]
nf_tables*.h: Remove extern from function prototypes
There are a mix of function prototypes with and without extern
in the kernel sources. Standardize on not using extern for
function prototypes.
Function prototypes don't need to be written with extern.
extern is assumed by the compiler. Its use is as unnecessary as
using auto to declare automatic/local variables in a block.
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: fix build warnings because of net_get_random_once merge
This patch fixes the following warning:
In file included from include/linux/skbuff.h:27:0,
from include/linux/netfilter.h:5,
from include/net/netns/netfilter.h:5,
from include/net/net_namespace.h:20,
from include/linux/init_task.h:14,
from init/init_task.c:1:
include/linux/net.h:243:14: warning: 'struct static_key' declared inside parameter list [enabled by default]
struct static_key *done_key);
on x86_64 allnoconfig, um defconfig and ia64 allmodconfig and maybe others as well.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 19 Oct 2013 23:52:42 +0000 (19:52 -0400)]
Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge
Antonio Quartulli says:
====================
this is another batch intended for net-next/linux-3.13.
This pull request is a bit bigger than usual, but 6 patches are very small
(three of them are about email updates)..
Patch 1 is fixing a previous merge conflict resolution that went wrong
(I realised that only now while checking other patches..).
Patches from 2 to 4 that are updating our emails in all the proper files
(Documentation/, headers and MAINTAINERS).
Patches 5, 6 and 7 are bringing a big improvement to the TranslationTable
component: it is now able to group non-mesh clients based on the VLAN they
belong to. In this way a lot a new enhancements are now possible thanks to the
fact that each batman-adv behaviour can be applied on a per VLAN basis.
And, of course, in patches from 8 to 12 you have some of the enhancements I was
talking about:
- make the batman-Gateway selection VLAN dependent
- make DAT (Distributed ARP Table) group ARP entries on a VLAN basis (this
allows DAT to work even when the admin decided to use the same IP subnet on
different VLANs)
- make the AP-Isolation behaviour switchable on each VLAN independently
- export VLAN specific attributes via sysfs. Switches like the AP-Isolation are
now exported once per VLAN (backward compatibility of the sysfs interface has
been preserved)
Patches 13 and 14 are small code cleanups.
Patch 15 is a minor improvement in the TT locking mechanism.
Patches 16 and 17 are other enhancements to the TT component. Those allow a
node to parse a "non-mesh client announcement message" and accept only those
TT entries belonging to certain VLANs.
Patch 18 exploits this parse&accept mechanism to make the Bridge Loop Avoidance
component reject only TT entries connected to the VLAN where it is operating.
Previous to this change, BLA was rejecting all the entries coming from any other
Backbone node, regardless of the VLAN (for more details about how the Bridge
Loop Avoidance works please check [1]).
David S. Miller [Sat, 19 Oct 2013 23:45:46 +0000 (19:45 -0400)]
Merge branch 'net_get_random_once'
Hannes Frederic Sowa says:
====================
This series implements support for delaying the initialization of secret
keys, e.g. used for hashing, for as long as possible. This functionality
is implemented by a new macro, net_get_random_bytes.
I already used it to protect the socket hashes, the syncookie secret
(most important) and the tcp_fastopen secrets.
Changelog:
v2) Use static_keys in net_get_random_once to have as minimal impact to
the fast-path as possible.
v3) added patch "static_key: WARN on usage before jump_label_init was called":
Patch "x86/jump_label: expect default_nop if static_key gets enabled
on boot-up" relaxes the checks for using static_key primitives before
jump_label_init. So tighten them first.
v4) Update changelog on the patch "static_key: WARN on usage before
jump_label_init was called"
Included patches:
ipv4: split inet_ehashfn to hash functions per compilation unit
ipv6: split inet6_ehashfn to hash functions per compilation unit
static_key: WARN on usage before jump_label_init was called
x86/jump_label: expect default_nop if static_key gets enabled on boot-up
net: introduce new macro net_get_random_once
inet: split syncookie keys for ipv4 and ipv6 and initialize with net_get_random_once
inet: convert inet_ehash_secret and ipv6_hash_secret to net_get_random_once
tcp: switch tcp_fastopen key generation to net_get_random_once
net: switch net_secret key generation to net_get_random_once
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: switch net_secret key generation to net_get_random_once
Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
tcp: switch tcp_fastopen key generation to net_get_random_once
Changed key initialization of tcp_fastopen cookies to net_get_random_once.
If the user sets a custom key net_get_random_once must be called at
least once to ensure we don't overwrite the user provided key when the
first cookie is generated later on.
Cc: Yuchung Cheng <ycheng@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
inet: convert inet_ehash_secret and ipv6_hash_secret to net_get_random_once
Initialize the ehash and ipv6_hash_secrets with net_get_random_once.
Each compilation unit gets its own secret now:
ipv4/inet_hashtables.o
ipv4/udp.o
ipv6/inet6_hashtables.o
ipv6/udp.o
rds/connection.o
The functions still get inlined into the hashing functions. In the fast
path we have at most two (needed in ipv6) if (unlikely(...)).
Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
inet: split syncookie keys for ipv4 and ipv6 and initialize with net_get_random_once
This patch splits the secret key for syncookies for ipv4 and ipv6 and
initializes them with net_get_random_once. This change was the reason I
did this series. I think the initialization of the syncookie_secret is
way to early.
Cc: Florian Westphal <fw@strlen.de> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net_get_random_once is a new macro which handles the initialization
of secret keys. It is possible to call it in the fast path. Only the
initialization depends on the spinlock and is rather slow. Otherwise
it should get used just before the key is used to delay the entropy
extration as late as possible to get better randomness. It returns true
if the key got initialized.
The usage of static_keys for net_get_random_once is a bit uncommon so
it needs some further explanation why this actually works:
=== In the simple non-HAVE_JUMP_LABEL case we actually have ===
no constrains to use static_key_(true|false) on keys initialized with
STATIC_KEY_INIT_(FALSE|TRUE). So this path just expands in favor of
the likely case that the initialization is already done. The key is
initialized like this:
___done_key = { .enabled = ATOMIC_INIT(0) }
The check
if (!static_key_true(&___done_key)) \
expands into (pseudo code)
if (!likely(___done_key > 0))
, so we take the fast path as soon as ___done_key is increased from the
helper function.
=== If HAVE_JUMP_LABELs are available this depends ===
on patching of jumps into the prepared NOPs, which is done in
jump_label_init at boot-up time (from start_kernel). It is forbidden
and dangerous to use net_get_random_once in functions which are called
before that!
At compilation time NOPs are generated at the call sites of
net_get_random_once. E.g. net/ipv6/inet6_hashtable.c:inet6_ehashfn (we
need to call net_get_random_once two times in inet6_ehashfn, so two NOPs):
Both will be patched to the actual jumps to the end of the function to
call __net_get_random_once at boot time as explained above.
arch_static_branch is optimized and inlined for false as return value and
actually also returns false in case the NOP is placed in the instruction
stream. So in the fast case we get a "return false". But because we
initialize ___done_key with (enabled != (entries & 1)) this call-site
will get patched up at boot thus returning true. The final check looks
like this:
if (!static_key_true(&___done_key)) \
___ret = __net_get_random_once(buf, \
expands to
if (!!static_key_false(&___done_key)) \
___ret = __net_get_random_once(buf, \
So we get true at boot time and as soon as static_key_slow_inc is called
on the key it will invert the logic and return false for the fast path.
static_key_slow_inc will change the branch because it got initialized
with .enabled == 0. After static_key_slow_inc is called on the key the
branch is replaced with a nop again.
=== Misc: ===
The helper defers the increment into a workqueue so we don't
have problems calling this code from atomic sections. A seperate boolean
(___done) guards the case where we enter net_get_random_once again before
the increment happend.
Cc: Ingo Molnar <mingo@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
x86/jump_label: expect default_nop if static_key gets enabled on boot-up
net_get_random_once(intrduced in the next patch) uses static_keys in
a way that they get enabled on boot-up instead of replaced with an
ideal_nop. So check for default_nop on initial enabling.
Other architectures don't check for this.
Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: x86@kernel.org Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
static_key: WARN on usage before jump_label_init was called
Usage of the static key primitives to toggle a branch must not be used
before jump_label_init() is called from init/main.c. jump_label_init
reorganizes and wires up the jump_entries so usage before that could
have unforeseen consequences.
Following primitives are now checked for correct use:
* static_key_slow_inc
* static_key_slow_dec
* static_key_slow_dec_deferred
* jump_label_rate_limit
The x86 architecture already checks this by testing if the default_nop
was already replaced with an optimal nop or with a branch instruction. It
will panic then. Other architectures don't check for this.
Because we need to relax this check for the x86 arch to allow code to
transition from default_nop to the enabled state and other architectures
did not check for this at all this patch introduces checking on the
static_key primitives in a non-arch dependent manner.
All checked functions are considered slow-path so the additional check
does no harm to performance.
The warnings are best observed with earlyprintk.
Based on a patch from Andi Kleen.
Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: split inet6_ehashfn to hash functions per compilation unit
This patch splits the inet6_ehashfn into separate ones in
ipv6/inet6_hashtables.o and ipv6/udp.o to ease the introduction of
seperate secrets keys later.
Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
ipv4: split inet_ehashfn to hash functions per compilation unit
This duplicates a bit of code but let's us easily introduce
separate secret keys later. The separate compilation units are
ipv4/inet_hashtabbles.o, ipv4/udp.o and rds/connection.o.
Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 19 Oct 2013 23:37:06 +0000 (19:37 -0400)]
Merge branch 'ipip_gso'
Eric Dumazet says:
====================
net: Implement GSO/TSO support for IPIP
This patch serie implements GSO/TSO support for IPIP
David, please note it applies after "ipv4: gso: send_check() & segment() cleanups"
( http://patchwork.ozlabs.org/patch/284714/ )
Broadcom bnx2x driver is now enabled for TSO support of IPIP traffic
Before patch :
lpq83:~# ./netperf -H 7.7.9.84 -Cc
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
lpq83:~# ./netperf -H 7.7.9.84 -Cc
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
Eric Dumazet [Sat, 19 Oct 2013 18:42:58 +0000 (11:42 -0700)]
bnx2x: add TSO support for IPIP
bnx2x driver already handles TSO for GRE, current code
is the same for IPIP.
Performance results : (Note we are now limited by receiver,
as it does not support GRO for IPIP yet)
Before patch :
lpq83:~# ./netperf -H 7.7.9.84 -Cc
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
lpq83:~# ./netperf -H 7.7.9.84 -Cc
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
Eric Dumazet [Sat, 19 Oct 2013 18:42:57 +0000 (11:42 -0700)]
ipip: add GSO/TSO support
Now inet_gso_segment() is stackable, its relatively easy to
implement GSO/TSO support for IPIP
Performance results, when segmentation is done after tunnel
device (as no NIC is yet enabled for TSO IPIP support) :
Before patch :
lpq83:~# ./netperf -H 7.7.9.84 -Cc
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
lpq83:~# ./netperf -H 7.7.9.84 -Cc
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
Ajit Khaparde [Fri, 18 Oct 2013 21:06:24 +0000 (16:06 -0500)]
be2net: Rework PCIe error report log messaging
Currently we log a message whenever pcie_enable_error_reporting fails.
The message clutters up logs, especially when we don't support it for VFs.
Instead enable this only for PFs and log a message when the call succeeds.
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Fri, 18 Oct 2013 20:48:25 +0000 (13:48 -0700)]
net: misc: Remove extern from function prototypes
There are a mix of function prototypes with and without extern
in the kernel sources. Standardize on not using extern for
function prototypes.
Function prototypes don't need to be written with extern.
extern is assumed by the compiler. Its use is as unnecessary as
using auto to declare automatic/local variables in a block.
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Fri, 18 Oct 2013 20:48:24 +0000 (13:48 -0700)]
net: ipv4/ipv6: Remove extern from function prototypes
There are a mix of function prototypes with and without extern
in the kernel sources. Standardize on not using extern for
function prototypes.
Function prototypes don't need to be written with extern.
extern is assumed by the compiler. Its use is as unnecessary as
using auto to declare automatic/local variables in a block.
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Fri, 18 Oct 2013 20:48:23 +0000 (13:48 -0700)]
net: dccp: Remove extern from function prototypes
There are a mix of function prototypes with and without extern
in the kernel sources. Standardize on not using extern for
function prototypes.
Function prototypes don't need to be written with extern.
extern is assumed by the compiler. Its use is as unnecessary as
using auto to declare automatic/local variables in a block.
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Fri, 18 Oct 2013 20:48:22 +0000 (13:48 -0700)]
net: 8021q/bluetooth/bridge/can/ceph: Remove extern from function prototypes
There are a mix of function prototypes with and without extern
in the kernel sources. Standardize on not using extern for
function prototypes.
Function prototypes don't need to be written with extern.
extern is assumed by the compiler. Its use is as unnecessary as
using auto to declare automatic/local variables in a block.
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
batman-adv: make the backbone gw check VLAN specific
The backbone gw check has to be VLAN specific so that code
using it can specify VID where the check has to be done.
In the TT code, the check has been moved into the
tt_global_add() function so that it can be performed on a
per-entry basis instead of ignoring all the TT data received
from another backbone node. Only TT global entries belonging
to the VLAN where the backbone node is connected to are
skipped.
All the other spots where the TT code was checking whether a
node is a backbone have been removed.
Moreover, batadv_bla_is_backbone_gw_orig() now returns bool
since it used to return only 1 or 0.
Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
batman-adv: make the TT global purge routine VLAN specific
Instead of unconditionally removing all the TT entries
served by a given originator, make tt_global_orig_del()
remove only entries matching a given VLAN identifier
provided as argument.
If such argument is negative all the global entries
served by the originator are removed.
This change is used into the BLA code to purge entries
served by a newly discovered Backbone node, but limiting
the operation only to those connected to the VLAN where the
backbone has been discovered.
Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
This change allows nodes to handle the TT table on a
per-VLAN basis. This is needed because nodes may have to
store only some of the global entries advertised by another
node.
In this scenario such nodes would re-create only a partial
global table and would not be able to compute a correct CRC
anymore.
This patch splits the logic and introduces one CRC per VLAN.
In this way a node fetching only some entries belonging to
some VLANs is still able to compute the needed CRCs and
still check the table correctness.
With this patch the shape of the TVLV-TT is changed too
because now a node needs to advertise all the CRCs of all
the VLANs that it is wired to.
The debug output of the local Translation Table now shows
the CRC along with each entry since there is not a common
value for the entire table anymore.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
batman-adv: lock around TT operations to avoid sending inconsistent data
A TT response may be prepared and sent while the local or
global translation table is getting updated.
The worst case is when one of the tables is accessed after
its content has been recently updated but the metadata
(TTVN/CRC) has not yet. In this case the reader will get a
table content which does not match the TTVN/CRC.
This will lead to an inconsistent state and so to a TT
recovery.
To avoid entering this situation, put a lock around those TT
operations recomputing the metadata and around the TT
Response creation (the latter is the only reader that
accesses the metadata together with the table).
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
batman-adv: refine API calls for unicast transmissions of SKBs
With this patch the functions batadv_send_skb_unicast() and
batadv_send_skb_unicast_4addr() are further refined into
batadv_send_skb_via_tt(), batadv_send_skb_via_tt_4addr() and
batadv_send_skb_via_gw(). This way we avoid any "guessing" about where to send
a packet in the unicast forwarding methods and let the callers decide.
This is going to be useful for the upcoming multicast related patches in
particular.
Further, the return values were polished a little to use the more
appropriate NET_XMIT_* defines.
Signed-off-by: Linus Lüssing <linus.luessing@web.de> Acked-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
batman-adv: make the AP isolation attribute VLAN specific
AP isolation has to be enabled on one VLAN interface only.
This patch moves the AP isolation attribute to the per-vlan
interface attribute set, enabling it to have a different
value depending on the selected vlan.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Each VLAN can now have its own set of attributes which are
exported through a new subfolder in the sysfs tree.
Each VLAN created on top of a soft_iface will have its own
subfolder.
The subfolder is named "vlan%VID" and it is created inside
the "mesh" sysfs folder belonging to batman-adv.
Attributes corresponding to the untagged LAN are stored in
the root sysfs folder as before.
This patch also creates all the needed macros and data
structures to easily handle new VLAN spacific attributes.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
batman-adv: add per VLAN interface attribute framework
Since batman-adv is now fully VLAN-aware, a proper framework
able to handle per-vlan-interface attributes is needed.
Those attributes will affect the associated VLAN interface
only, rather than the real soft_iface (which would result
in every vlan interface having the same attribute
configuration).
To make the code simpler and easier to extend, attributes
associated to the standalone soft_iface are now treated
like belonging to yet another vlan having a special vid.
This vid is different from the others because it is made up
by all zeros and the VLAN_HAS_TAG bit is not set.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
batman-adv: make the Distributed ARP Table vlan aware
The same IP subnet can be used on different VLANs, therefore
DAT has to differentiate whether the IP to resolve belongs
to one or the other virtual LAN.
To accomplish this task DAT has to deal with the VLAN tag
and store it together with each ARP entry.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
batman-adv: use vid when computing local and global TT CRC
now that each TT entry is characterised by a VLAN ID, the
latter has to be taken into consideration when computing the
local/global table CRC as it would be theoretically possible
to have the same client in two different VLANs
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
batman-adv: add the VLAN ID attribute to the TT entry
To make the translation table code VLAN-aware, each entry
must carry the VLAN ID which it belongs to. This patch adds
such attribute to the related TT structures.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Randy found that if network namespace not enabled then
nd_net does not exist and would cause compilation failure.
This is handled correctly by using the dev_net() macro.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Wed, 16 Oct 2013 16:36:51 +0000 (12:36 -0400)]
tcp: remove redundant code in __tcp_retransmit_skb()
Remove the specialized code in __tcp_retransmit_skb() that tries to trim
any ACKed payload preceding a FIN before we retransmit (this was added
in 1999 in v2.2.3pre3). This trimming code was made unreachable by the
more general code added above it that uses tcp_trim_head() to trim any
ACKed payload, with or without a FIN (this was added in "[NET]: Add
segmentation offload support to TCP." in 2002 circa v2.5.33).
Signed-off-by: Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Manoil [Mon, 14 Oct 2013 14:05:09 +0000 (17:05 +0300)]
gianfar: Simplify MQ polling to avoid soft lockup
Under certain low traffic conditions, the single core
devices with multiple Rx/Tx queues (MQ mode) may reach
soft lockup due to gfar_poll not returning in proper time.
The following exception was obtained using iperf on a 100Mbit
half-duplex link, for a p1010 single core device:
To prevent this, the outer while() loop has been removed
allowing gfar_poll() to return faster even if there's
still budget left. Also, there's no need to recompute
the budget per Rx queue anymore.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 18 Oct 2013 09:06:56 +0000 (12:06 +0300)]
ax25: cleanup a range test
The current test works fine in practice. The "amount" variable is
actually used as a boolean so negative values or any non-zero values
count as "true". However since we don't allow numbers greater than one,
let's not allow negative numbers either.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 18 Oct 2013 17:42:30 +0000 (13:42 -0400)]
Merge branch 'qlcnic'
Himanshu Madhani says:
====================
qlcnic: ethtool enhancements and code cleanup.
This patch series contains
o updates to ethtool for pause settings and enhance
register dump to display mask and ring indices.
o cleanup in DCB code and remove redundant eSwitch enablement command.
o fixed firmware dump collection logic to skip unknown entries.
Changes from v3 -> v4
o Dropped patch for Tx queue validation to be submitted in net.
Changes from v2 -> v3
o Updated patch to print informational messages as per Joe Perches's comment.
Changes from v1 -> v2
o Dropped patch to register device if adapter is in FAILED state for more rework.
o Updated patch to display ring indices via ethtool per Ben Hutchings's comment.
o Update patch for DCB cleanup per Stephen Hemminger's comment.
Please apply to net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Shahed Shaikh [Fri, 18 Oct 2013 16:22:34 +0000 (12:22 -0400)]
qlcnic: Skip unknown entry type while collecting firmware dump
o Driver aborts the minidump collection operation when it finds
an unknown entry opcode. This patch skips unknown entry type
and resumes the minidump collection operation.
o Removed a comparision of collected dump size with expected dump size.
Size may differ when driver decides to skip an entry.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
o Move dcb specific function definitions to dcb files.
o Move dcb specific variables to qlcnic_dcb structure.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sony Chacko [Fri, 18 Oct 2013 16:22:32 +0000 (12:22 -0400)]
qlcnic: Remove redundant eSwitch enable commands
When more than one NIC physical functions are enabled on a port,
eSwitch on that port gets enabled automatically. Driver
need not explicitly enable the eSwitch.
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Update ethtool standard pause parameter settings and display
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pratik Pujar [Fri, 18 Oct 2013 16:22:30 +0000 (12:22 -0400)]
qlcnic: Firmware dump collection when auto recovery is disabled.
o Allow collecting the firmware dump of halted firmware when auto
recovery is disabled.
Signed-off-by: Pratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pratik Pujar [Fri, 18 Oct 2013 16:22:29 +0000 (12:22 -0400)]
qlcnic: Enhance ethtool to display ring indices and interrupt mask
o Updated ethtool -d <ethX> option to display ring indices for Transmit(Tx),
Receive(Rx), and Status(St) rings.
o Updated ethtool -d <ethX> option to display ring interrupt mask for Transmit(Tx),
and Status(St) rings.
Signed-off-by: Pratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-beck.git / log