Artem Bityutskiy [Wed, 28 Dec 2011 16:35:07 +0000 (18:35 +0200)]
mtd: introduce mtd_has_oob helper
We are working in the direction of making sure that MTD clients to not
use 'mtd->func' pointers directly. In some places we want to know if
OOB operations are supported by an MTD device. Introduce 'mtd_has_oob()'
helper for these purposes.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 30 Dec 2011 14:11:14 +0000 (16:11 +0200)]
mtd: mtdcore: export symbols cleanup
The mtdcore.c file is a bit inconsistent - some EXPORT_SYMBOL_GPL declarations
follow the corresponding functions, some are placed at the end. This patch
harmonizes the file so that EXPORT_SYMBOL_GPL declarations follow the
corresponding function.
It also removes few extra newlines and trailing white-spaces.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 30 Dec 2011 13:57:25 +0000 (15:57 +0200)]
mtd: clean-up the default_mtd_writev function
1. Teach 'mtd_write()' function to return '-EROFS' if the write method
is undefined, and remove the corresponding check from
'default_mtd_writev()'.
2. Do not test 'retlen' for NULL - it cannot be NULL.
3. Few minor coding stile clean-ups.
4. Add a kerneldoc comment
Additionally, minor fixes to the kerneldoc comments of the neighbor function.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Thu, 29 Dec 2011 16:06:01 +0000 (18:06 +0200)]
mtd: sst25l: kill unused variable
Fix the following gcc warning:
drivers/mtd/devices/sst25l.c: In function ‘sst25l_probe’:
drivers/mtd/devices/sst25l.c:381:11: warning: unused variable ‘i’ [-Wunused-variable]
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Thu, 29 Dec 2011 16:04:31 +0000 (18:04 +0200)]
mtd: onenand: kill unused variable
Fix this gcc warning:
drivers/mtd/onenand/onenand_base.c: In function ‘onenand_block_markbad’:
drivers/mtd/onenand/onenand_base.c:2636:23: warning: unused variable ‘this’ [-Wunused-variable]
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
I ran it twice, because there were cases of double zero assigments
in mtd tests. Then I went through the patch to verify that spatch
did not find any false positives.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Wed, 28 Dec 2011 16:14:49 +0000 (18:14 +0200)]
mtd: always initialize retlen to zero
Make sure that the retlen is set to 0 in case of error. This harmonizes
drivers - some set it to 0 in some error cases and do not write anything
in other error cases. Now we can do this consistently for all drivers.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 13:25:39 +0000 (15:25 +0200)]
mtd: introduce mtd_erase interface
This patch is part of a patch-set which changes the MTD interface
from 'mtd->func()' form to 'mtd_func()' form. We need this because
we want to add common code to to all drivers in the mtd core level,
which is impossible with the current interface when MTD clients
call driver functions like 'read()' or 'write()' directly.
At this point we just introduce a new inline wrapper function, but
later some of them are expected to gain more code. E.g., the input
parameters check should be moved to the wrappers rather than be
duplicated at many drivers.
This particular patch introduced the 'mtd_erase()' interface. The
following patches add all the other interfaces one by one.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 15:27:46 +0000 (17:27 +0200)]
mtd: mtdchar: rename functions
We are going to re-work the MTD interface and change 'mtd->write()' to
'mtd_write()', 'mtd->read()' to 'mtd_read()' and so forth for all functions
in the 'struct mtd_info' structure.
However, mtdchar.c has its own 'mtd_read()', 'mtd_write()', etc functions
which collide with our changes. This patch renames these functions
to 'mtdchar_read()', 'mtdchar_write()', etc.
Additionally, to make the 'mtdchar.c' file look consistent, rename
similarly all the other functions starting with 'mtd_'.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 13:44:14 +0000 (15:44 +0200)]
logfs: rename functions starting with mtd_
We are going to re-work the MTD interface and change 'mtd->write()' to
'mtd_write()', 'mtd->read()' to 'mtd_read()' and so forth for all functions
in the 'struct mtd_info' structure.
However, logfs has its own 'mtd_read()', 'mtd_write()', etc functions
which collide with our changes. This patch renames these logfs functions
to 'logfs_mtd_read()', 'logfs_mtd_write()', etc.
Additionally, to make the 'fs/logfs/dev_mtd.c' file look consistent, rename
similarly all the other functions starting with 'mtd_'.
Cc: Jörn Engel <joern@logfs.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Tue, 27 Dec 2011 15:59:04 +0000 (17:59 +0200)]
mtd: lpddr: drop unnecessary zeroing
We allocate the "mtd" structure using kzalloc which means we do not have
to initialize unused MTD function pointers to NULL, since it is safe to
assume in Linux that NULL contains all zeroes.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 30 Dec 2011 16:28:01 +0000 (18:28 +0200)]
mtd: map.h: fix arm cross-build failure
This patch fixes the following build failure:
In file included from include/linux/mtd/qinfo.h:4:0,
from include/linux/mtd/pfow.h:7,
from drivers/mtd/lpddr/lpddr_cmds.c:27:
include/linux/mtd/map.h: In function 'inline_map_read':
include/linux/mtd/map.h:409:3: error: implicit declaration of function 'BUILD_BUG_ON' [-Werror=implicit-function-declaration]
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Julia Lawall [Mon, 26 Dec 2011 17:38:01 +0000 (18:38 +0100)]
mtd: lantiq-flash: drop iounmap for devm_ allocated data
Data allocated with devm_ioremap or devm_ioremap_nocache should not be
freed using iounmap, because doing so causes a dangling pointer, and a
subsequent double free.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
expression x;
@@
(
x = devm_ioremap(...)
|
x = devm_ioremap_nocache(...)
)
@@
expression r.x;
@@
* iounmap(x)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jamie Iles [Sun, 18 Dec 2011 10:00:49 +0000 (10:00 +0000)]
mtd: gpio-nand: add device tree bindings
Add device tree bindings so that the gpio-nand driver may be
instantiated from the device tree. This also allows the partitions
to be specified in the device tree.
v7: - restore runtime device tree/non device tree detection
v6: - convert to mtd_device_parse_register()
v5: - fold dt config helpers into a single gpio_nand_of_get_config()
v4: - get io sync address from gpio-control-nand,io-sync-reg
property rather than a resource
- clarified a few details in the binding
v3: - remove redundant cast and a couple of whitespace/naming
changes
v2: - add CONFIG_OF guards for non-dt platforms
- compatible becomes gpio-control-nand
- clarify some binding details
Jonas Gorski [Sat, 17 Dec 2011 12:58:18 +0000 (13:58 +0100)]
mtd: bcm63xxpart: check the image tag's crc32
Only use the values from the image tag if it is valid. Always create
the CFE, NVRAM and linux partitions, to allow flashing a new image even
if the old is invalid without overwriting CFE or NVRAM.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jonas Gorski [Mon, 19 Dec 2011 10:36:04 +0000 (11:36 +0100)]
mtd: bcm63xxpart: make sure CFE and NVRAM partitions are at least 64KiB
The CFE boot loader on BCM63XX platforms assumes itself and the NVRAM
partition to be 64 KiB (or erase block sized, if larger).
Ensure this assumption is also met when creating the partitions to
prevent accidential erasure of CFE or NVRAM.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jonas Gorski [Sat, 17 Dec 2011 12:58:14 +0000 (13:58 +0100)]
mtd: bcm63xxpart: check version marker string for newer CFEs
Recent CFEs do not contain the CFE1CFE1 magic anymore, so check for the
"cfe-v" version marker string instead. As very old CFEs do not have
this string, leave the CFE1CFE1 magic as a fallback for detection.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Shengzhou Liu [Mon, 12 Dec 2011 09:40:52 +0000 (17:40 +0800)]
mtd: nand: fixup for fmr initialization of Freescale NAND controller
There was a bug for fmr initialization, which lead to fmr was always 0x100
in fsl_elbc_chip_init() and caused FCM command timeout before calling
fsl_elbc_chip_init_tail(), now we initialize CWTO to maximum timeout value
and not relying on the setting of bootloader.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Liu Shuo [Fri, 9 Dec 2011 09:42:54 +0000 (17:42 +0800)]
mtd: fsl_elbc_nand: set Nand flash page address to FBAR and FPAR correctly
If we use the Nand flash chip whose number of pages in a block is greater
than 64(for large page), we must treat the low bit of FBAR as being the
high bit of the page address due to the limitation of FCM, it simply uses
the low 6-bits (for large page) of the combined block/page address as the
FPAR component, rather than considering the actual block size.
Signed-off-by: Liu Shuo <b35362@freescale.com> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Tang Yuantian <b29983@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The array of unsigned long pointed by oops_page_used is allocated
by vmalloc which requires the size to be in bytes.
BITS_PER_LONG is equal to 32.
If we want to allocate memory for 32 pages with one bit per page then
32 / BITS_PER_LONG is equal to 1 byte that is 8 bits.
To fix it we need to multiply the result by sizeof(unsigned long) equal to 4.
Cc: stable@kernel.org Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Eric Sandeen [Tue, 6 Dec 2011 23:06:06 +0000 (17:06 -0600)]
jffs2: fix up error handling for insert_inode_locked
after 250df6ed274d767da844a5d9f05720b804240197
(fs: protect inode->i_state with inode->i_lock), insert_inode_locked()
no longer returns the inode with I_NEW set on failure. However,
the error handler still calls unlock_new_inode() on failure,
which does a WARN_ON if I_NEW is not set, so any failure spews
a lot of warnings.
We can just drop the unlock_new_inode() if insert_inode_locked()
fails here.
Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jonas Gorski [Mon, 5 Dec 2011 15:08:08 +0000 (16:08 +0100)]
mtd: maps: bcm963xx-flash: make CFE partition parsing an mtd parser
Recent BCM63XX devices support a variety of flash types (parallel, SPI,
NAND) and share the partition layout. To prevent code duplication make
the CFE partition parsing code a stand alone mtd parser to allow SPI or
NAND flash drivers to use it.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Liu Shuo [Sun, 4 Dec 2011 04:31:37 +0000 (12:31 +0800)]
mtd: nand: set correct length to FBCR for a non-full-page write
When we do a non-full-page write, the length be set to FBCR should
not be 'elbc_fcm_ctrl->index', it should be 'elbc_fcm_ctrl->index -
elbc_fcm_ctrl->column'.
Signed-off-by: Liu Shuo <b35362@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Liu Shuo [Sun, 4 Dec 2011 04:31:36 +0000 (12:31 +0800)]
mtd: nand: use elbc_fcm_ctrl->oob to set FPAR_MS bit of FPAR
On both of large-page chip and small-page chip, we always should use
'elbc_fcm_ctrl->oob' to set the FPAR_LP_MS/FPAR_SP_MS bit of FPAR, don't
use a overflowed 'column' to set it.
Signed-off-by: Liu Shuo <b35362@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Tue, 29 Nov 2011 22:16:35 +0000 (23:16 +0100)]
Documentation: add sysfs entries for mtd docg3 chips
Add documentation for MSystems disk-on-chip docg3 chips
sysfs entries, which enable and disable protection areas,
giving or disabling access to the chip's memory.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Dan Carpenter [Mon, 28 Nov 2011 13:53:13 +0000 (16:53 +0300)]
mtd: docg3: dereferencing an ERR_PTR() in docg3_probe()
If doc_probe_device() returned an ERR_PTR, then we accidentally saved
that to docg3_floors[floor] = mtd; which gets derefenced in the error
handling when we call doc_release_device().
I've reworked the error handling to take care of that and hopefully
make it a little simpler.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
mtd: Remove redundant spi driver bus initialization
In ancient times it was necessary to manually initialize the bus field of an
spi_driver to spi_bus_type. These days this is done in spi_driver_register(),
so we can drop the manual assignment.
The patch was generated using the following coccinelle semantic patch:
// <smpl>
@@
identifier _driver;
@@
struct spi_driver _driver = {
.driver = {
- .bus = &spi_bus_type,
},
};
// </smpl>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:58 +0000 (16:02 +0100)]
mtd: docg3: add protection areas sysfs access
As each docg3 chip has 2 protection areas (DPS0 and DPS1),
and because theses areas can prevent user access to the chip
data, add for each floor the sysfs entries which insert the
protection key into the right DPS.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:57 +0000 (16:02 +0100)]
mtd: docg3: add fast mode
Docg3 chips can work in 3 modes : normal MLC mode, fast
mode and reliable mode. Normally, as docg3 is a MLC chip, it
should be configured to work in normal mode.
In both normal mode, each page is distinct. This
means that writing to page 12 of blocks 14,15 writes only to
that page, and reading from page 12 of blocks 14,15 reads
only from that page.
In reliable and fast modes, pages are coupled by pairs, and
are clones one of each other. This means that the available
capacity of the chip is halved. Pages are coupled in each
block, and page of index 2*n contains the same data as page
2*n+1 of the same block.
In fast mode, the reads occur a bit faster, but are a bit
less reliable that in normal mode.
When reading from page 2*n, the chip reads bytes from both
page 2*n and page 2*n+1, makes a logical and for each byte,
and returns the result. As programming a page means
"clearing bits", even if a bit was not cleared on one page
because the flash is worn out, the other page has the bit
cleared, and the result of the "AND" gives a correct result.
When writing to page 2*n, the chip writes data to both page
2*n and page 2*n+1.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:56 +0000 (16:02 +0100)]
mtd: docg3: add suspend and resume
Add functions to powerdown and powerup from suspend, in
order to save power.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:55 +0000 (16:02 +0100)]
mtd: docg3: add ECC correction code
Credit for discovering the BCH algorith parameters, and bit
reversing algorithm is to be give to Mike Dunn and Ivan
Djelic.
The BCH correction code relied upon the BCH library, where
all data and ECC is bit-reversed. The BCH library works
correctly when each input byte is bit-reversed, and
accordingly ECC output is also bit-reversed.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:54 +0000 (16:02 +0100)]
mtd: docg3: map erase and write functions
Map the developped write and erase functions into the mtd
structure.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:53 +0000 (16:02 +0100)]
mtd: docg3: add erase functions
Add erase capability to the docg3 driver. The erase block is
made of 2 physical blocks, as both share all 64 pages. That
makes an erase block of at least 64 kBytes.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:52 +0000 (16:02 +0100)]
mtd: docg3: add write functions
Add write capability to the docg3 driver. The writes are
possible on a single page (512 bytes + 16 bytes), even if
that page is split on 2 physical pages on 2 blocks (each on
one plane).
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:51 +0000 (16:02 +0100)]
mtd: docg3: add OOB buffer to device structure
Add OOB buffer area to store the OOB data until the actual
page is written, so that it can be completed by hardware ECC
generator.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:50 +0000 (16:02 +0100)]
mtd: docg3: add registers for erasing and writing
Add the required registers and commands to erase and write
flash pages / blocks.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:49 +0000 (16:02 +0100)]
mtd: docg3: add OOB layout to mtdinfo
Add OOB layout description for docg3, so that userspace can
use this information to setup the data for write_oob().
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:48 +0000 (16:02 +0100)]
mtd: docg3: add multiple floor support
Add support for multiple floors, ie. cascaded docg3
chips. There might be 4 docg3 chips cascaded, sharing the
same address space, and providing up to 4 times the storage
capacity of a unique chip.
Each floor will be seen as an independant mtd device.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:47 +0000 (16:02 +0100)]
mtd: docg3: fix reading oob+data without correction
Fix the docg3 reads to be able to cope with all possible
data buffer / oob buffer / file mode combinations from
docg3_read_oob().
This especially ensures that raw reads do not use ECC
corrections, and AUTOOOB and PLACEOOB do use ECC
correction.
The approach is to empty docg3_read() and make it a wrapper
to docg3_read_oob(). As docg3_read_oob() handles all the
funny cases (no data buffer but oob buffer, data buffer but
no oob buffer, ...), docg3_read() is just a special use of
docg3_read_oob().
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:46 +0000 (16:02 +0100)]
mtd: docg3: fix BCH registers
BCH registers are contiguous, not on every byte. Fix the
register definitions.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:45 +0000 (16:02 +0100)]
mtd: docg3: fix protection areas reading
The protection areas boundaries were on 16bit registers, not
8bit. This is consistent with block numbers, which can
extend up to 4096 on bigger chips (and is 2048 on the
docg3).
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:44 +0000 (16:02 +0100)]
mtd: docg3: fix tracing of IO in writeb
Writeb was incorrectly traced as a 16 bits write, instead of
a 8 bits write. Fix it by tracing the correct width.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:43 +0000 (16:02 +0100)]
mtd: docg3: fix debug log verbosity
Change the NOP debug log verbosity to very verbose to
unburden log analysis.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Shubhrajyoti D [Wed, 16 Nov 2011 05:18:00 +0000 (10:48 +0530)]
mtd: nand: Making MTD_NAND_OMAP2 depend on ARCH_OMAP2PLUS
Making MTD_NAND_OMAP2 depend on ARCH_OMAP2PLUS instead of
oring with ARCH2/3/4.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Aaron Sierra [Tue, 15 Nov 2011 00:44:34 +0000 (18:44 -0600)]
mtd: cfi: Allow per-mapping CFI device endianness
This patch allows each CFI device map to use its own endianness. The
globally defined CFI endianness (CONFIG_MTD_CFI_NOSWAP,
CONFIG_MTD_CFI_BE_BYTE_SWAP or CONFIG_MTD_CFI_LE_BYTE_SWAP) becomes the
default value which can be overridden by a driver for a particular device.
Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
But on these error paths, the block device's `dev->open' count is
already incremented before we check for errors. This meant that, while
the error path was handled correctly on the first time through
blktrans_open(), the device is erroneously considered already open on
the second time through.
This problem can be seen, for instance, when a UBI volume is
simultaneously mounted as a UBIFS partition and read through its
corresponding gluebi mtdblockX device. This results in blktrans_open()
passing its error checks (with `dev->open > 0') without actually having
a handle on the device. Here's a summarized log of the actions and
results with nandsim:
projects / mv-sheeva.git / log