Mark Brown [Wed, 9 Jun 2010 13:54:54 +0000 (14:54 +0100)]
mfd: Staticise ab3550 register access functions
These are now exported via an ops table rather than referenced
directly and so should be staticised.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Linus Walleij [Fri, 28 May 2010 00:59:44 +0000 (02:59 +0200)]
mfd: AB8500 mask off irrelevant bits from the SPI message
The registers on the AB8500 are only 8 bits wide, so the content
of the remaining bits is undefined. Let's mask off the undefined
stuff when returning a register in an SPI read.
Acked-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Dan Carpenter [Wed, 26 May 2010 22:54:09 +0000 (00:54 +0200)]
mfd: Fix 88pm860x uninitialized variable and clean up
The original code had a compile warning:
drivers/mfd/88pm860x-core.c:431: warning: ‘ret’ may be used
uninitialized in this function
It seems like the warning is valid if either pdata or pdata->touch is
NULL.
This patch checks pdata and pdata->touch at the beginning of the
function. That means everything can be pulled in one indent level.
Now all the statements fit within the 80 character limit.
Also at that point the "use_gpadc" variable isn't needed and removing
it simplifies the logic.
Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Haojian Zhuang <hzhuang1@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Axel Lin [Tue, 25 May 2010 06:49:51 +0000 (14:49 +0800)]
mfd: Fix memory leak in ab3100_otp_probe
In current implementation, there is a memory leak if ab3100_otp_read fail.
And in the case of ab3100_otp_init_debugfs fail, it does not properly remove
sysfs entries.
This patch properly handle above failure cases.
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Randy Dunlap [Wed, 11 Aug 2010 13:26:57 +0000 (13:26 +0000)]
phylib: available for any speed ethernet
Several gigabit network drivers (SB1250_MAC, TIGON3, FSL, GIANFAR,
UCC_GETH, MV643XX_ETH, XILINX_LL_TEMAC, S6GMAC, STMMAC_ETH, PASEMI_MAC,
and OCTEON_ETHERNET) select PHYLIB. These drivers are not under
NET_ETHERNET (10/100 mbit), so this warning is generated (long, irrelevant
parts are omitted):
Mike Snitzer [Thu, 12 Aug 2010 03:14:32 +0000 (04:14 +0100)]
dm mpath: support discard
Enable discard support in the DM multipath target.
This discard support depends on a few discard-specific fixes to the
block layer's request stacking driver methods.
Discard requests are optional so don't allow a failed discard to trigger
path failures. If there is a real problem with a given path the
barriers associated with the discard (either before or after the
discard) will cause path failure. That said, unconditionally passing
discard failures up the stack is not ideal. This must be fixed once DM
has more information about the nature of the underlying storage failure.
Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Mikulas Patocka [Thu, 12 Aug 2010 03:14:26 +0000 (04:14 +0100)]
dm stripe: support discards
The DM core will submit a discard bio to the stripe target for each
stripe in a striped DM device. The stripe target will determine
stripe-specific portions of the supplied bio to be remapped into
individual (at most 'num_discard_requests' extents). If a given
stripe-specific discard bio doesn't touch a particular stripe the bio
will be dropped.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Thu, 12 Aug 2010 03:14:24 +0000 (04:14 +0100)]
dm: split discard requests on target boundaries
Update __clone_and_map_discard to loop across all targets in a DM
device's table when it processes a discard bio. If a discard crosses a
target boundary it must be split accordingly.
Update __issue_target_requests and __issue_target_request to allow a
cloned discard bio to have a custom start sector and size.
Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Thu, 12 Aug 2010 03:14:10 +0000 (04:14 +0100)]
dm: factor out max_io_len_target_boundary
Split max_io_len_target_boundary out of max_io_len so that the discard
support can make use of it without duplicating max_io_len code.
Avoiding max_io_len's split_io logic enables DM's discard support to
submit the entire discard request to a target. But discards must still
be split on target boundaries.
Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Thu, 12 Aug 2010 03:14:08 +0000 (04:14 +0100)]
dm: linear support discard
Allow discards to be passed through to linear mappings if at least one
underlying device supports it. Discards will be forwarded only to
devices that support them.
A target that supports discards should set num_discard_requests to
indicate how many times each discard request must be submitted to it.
Verify table's underlying devices support discards prior to setting the
associated DM device as capable of discards (via QUEUE_FLAG_DISCARD).
Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Joe Thornber <thornber@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Milan Broz [Thu, 12 Aug 2010 03:14:07 +0000 (04:14 +0100)]
dm crypt: simplify crypt_ctr
Allocate cipher strings indpendently of struct crypt_config and move
cipher parsing and allocation into a separate function to prepare for
supporting the cryptoapi format e.g. "xts(aes)".
No functional change in this patch.
Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Will Drewry [Thu, 12 Aug 2010 03:14:03 +0000 (04:14 +0100)]
dm ioctl: refactor dm_table_complete
This change unifies the various checks and finalization that occurs on a
table prior to use. By doing so, it allows table construction without
traversing the dm-ioctl interface.
Signed-off-by: Will Drewry <wad@chromium.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Thu, 12 Aug 2010 03:14:02 +0000 (04:14 +0100)]
dm snapshot: implement merge
Implement merge method for the snapshot origin to improve read
performance.
Without merge method, dm asks the upper layers to submit smallest possible
bios --- one page. Submitting such small bios impacts performance negatively
when reading or writing the origin device.
Without this patch, CPU consumption when reading the origin on lvm on md-raid0
was 6 to 12%, with this patch, it drops to 1 to 4%.
Note: in my testing, it actually degraded performance in some settings, I
traced it to Maxtor disks having problems with > 512-sector requests.
Reducing the number of sectors to /sys/block/sd*/queue/max_sectors_kb to
256 fixed the read performance. I think we don't have to care about weird
disks that actually degrade performance because of large requests being
sent to them.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Thu, 12 Aug 2010 03:14:02 +0000 (04:14 +0100)]
dm: do not initialise full request queue when bio based
Change bio-based mapped devices no longer to have a fully initialized
request_queue (request_fn, elevator, etc). This means bio-based DM
devices no longer register elevator sysfs attributes ('iosched/' tree
or 'scheduler' other than "none").
In contrast, a request-based DM device will continue to have a full
request_queue and will register elevator sysfs attributes. Therefore
a user can determine a DM device's type by checking if elevator sysfs
attributes exist.
First allocate a minimalist request_queue structure for a DM device
(needed for both bio and request-based DM).
Initialization of a full request_queue is deferred until it is known
that the DM device is request-based, at the end of the table load
sequence.
Factor DM device's request_queue initialization:
- common to both request-based and bio-based into dm_init_md_queue().
- specific to request-based into dm_init_request_based_queue().
The md->type_lock mutex is used to protect md->queue, in addition to
md->type, during table_load().
A DM device's first table_load will establish the immutable md->type.
But md->queue initialization, based on md->type, may fail at that time
(because blk_init_allocated_queue cannot allocate memory). Therefore
any subsequent table_load must (re)try dm_setup_md_queue independently of
establishing md->type.
Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Thu, 12 Aug 2010 03:14:01 +0000 (04:14 +0100)]
dm ioctl: make bio or request based device type immutable
Determine whether a mapped device is bio-based or request-based when
loading its first (inactive) table and don't allow that to be changed
later.
This patch performs different device initialisation in each of the two
cases. (We don't think it's necessary to add code to support changing
between the two types.)
Allowed md->type transitions:
DM_TYPE_NONE to DM_TYPE_BIO_BASED
DM_TYPE_NONE to DM_TYPE_REQUEST_BASED
We now prevent table_load from replacing the inactive table with a
conflicting type of table even after an explicit table_clear.
Introduce 'type_lock' into the struct mapped_device to protect md->type
and to prepare for the next patch that will change the queue
initialization and allocate memory while md->type_lock is held.
Mikulas Patocka [Thu, 12 Aug 2010 03:14:00 +0000 (04:14 +0100)]
dm: skip second flush on bio unsupported error
When processing barriers, skip the second flush if processing the bio
failed with -EOPNOTSUPP. This can happen with discard+barrier requests.
If the device doesn't support discard, there would be two useless
SYNCHRONIZE CACHE commands. The first dm_flush cannot be so easily
optimized out, so we leave it there.
Previously, -EOPNOTSUPP could be received in dec_pending only with empty
barriers and we ignored that error, assuming the device not supporting
cache flushes has cache always consistent. With the addition of discard
barriers, this -EOPNOTSUPP can also be generated by discards and we
must record it in md->barrier_error for process_barrier.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Tomohiro Kusumi [Thu, 12 Aug 2010 03:13:59 +0000 (04:13 +0100)]
dm snapshot: persistent use define for disk header chunk size
This patch fixes hard-coded value for the size of a chunk that includes
disk header for persistent snapshot. It should be changed to existing
macro NUM_SNAPSHOT_HDR_CHUNKS instead of using hard-coded value 1.
Arnd Bergmann [Thu, 12 Aug 2010 03:13:57 +0000 (04:13 +0100)]
dm ioctl: use nonseekable_open
The dm control device does not implement read/write, so it has no use for
seeking. Using no_llseek prevents falling back to default_llseek, which
requires the BKL.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Kiyoshi Ueda [Thu, 12 Aug 2010 03:13:56 +0000 (04:13 +0100)]
dm: separate device deletion from dm_put
This patch separates the device deletion code from dm_put()
to make sure the deletion happens in the process context.
By this patch, device deletion always occurs in an ioctl (process)
context and dm_put() can be called in interrupt context.
As a result, the request-based dm's bad dm_put() usage pointed out
by Mikulas below disappears.
http://marc.info/?l=dm-devel&m=126699981019735&w=2
Without this patch, I confirmed there is a case to crash the system:
dm_put() => dm_table_destroy() => vfree() => BUG_ON(in_interrupt())
Some more backgrounds and details:
In request-based dm, a device opener can remove a mapped_device
while the last request is still completing, because bios in the last
request complete first and then the device opener can close and remove
the mapped_device before the last request completes:
CPU0 CPU1
=================================================================
<<INTERRUPT>>
blk_end_request_all(clone_rq)
blk_update_request(clone_rq)
bio_endio(clone_bio) == end_clone_bio
blk_update_request(orig_rq)
bio_endio(orig_bio)
<<I/O completed>>
dm_blk_close()
dev_remove()
dm_put(md)
<<Free md>>
blk_finish_request(clone_rq)
....
dm_end_request(clone_rq)
free_rq_clone(clone_rq)
blk_end_request_all(orig_rq)
rq_completed(md)
So request-based dm used dm_get()/dm_put() to hold md for each I/O
until its request completion handling is fully done.
However, the final dm_put() can call the device deletion code which
must not be run in interrupt context and may cause kernel panic.
To solve the problem, this patch moves the device deletion code,
dm_destroy(), to predetermined places that is actually deleting
the mapped_device in ioctl (process) context, and changes dm_put()
just to decrement the reference count of the mapped_device.
By this change, dm_put() can be used in any context and the symmetric
model below is introduced:
dm_create(): create a mapped_device
dm_destroy(): destroy a mapped_device
dm_get(): increment the reference count of a mapped_device
dm_put(): decrement the reference count of a mapped_device
dm_destroy() waits for all references of the mapped_device to disappear,
then deletes the mapped_device.
dm_destroy() uses active waiting with msleep(1), since deleting
the mapped_device isn't performance-critical task.
And since at this point, nobody opens the mapped_device and no new
reference will be taken, the pending counts are just for racing
completing activity and will eventually decrease to zero.
For the unlikely case of the forced module unload, dm_destroy_immediate(),
which doesn't wait and forcibly deletes the mapped_device, is also
introduced and used in dm_hash_remove_all(). Otherwise, "rmmod -f"
may be stuck and never return.
And now, because the mapped_device is deleted at this point, subsequent
accesses to the mapped_device may cause NULL pointer references.
Kiyoshi Ueda [Thu, 12 Aug 2010 03:13:55 +0000 (04:13 +0100)]
dm ioctl: release _hash_lock between devices in remove_all
This patch changes dm_hash_remove_all() to release _hash_lock when
removing a device. After removing the device, dm_hash_remove_all()
takes _hash_lock and searches the hash from scratch again.
This patch is a preparation for the next patch, which changes device
deletion code to wait for md reference to be 0. Without this patch,
the wait in the next patch may cause AB-BA deadlock:
CPU0 CPU1
-----------------------------------------------------------------------
dm_hash_remove_all()
down_write(_hash_lock)
table_status()
md = find_device()
dm_get(md)
<increment md->holders>
dm_get_live_or_inactive_table()
dm_get_inactive_table()
down_write(_hash_lock)
<in the md deletion code>
<wait for md->holders to be 0>
Kiyoshi Ueda [Thu, 12 Aug 2010 03:13:54 +0000 (04:13 +0100)]
dm: prevent access to md being deleted
This patch prevents access to mapped_device which is being deleted.
Currently, even after a mapped_device has been removed from the hash,
it could be accessed through idr_find() using minor number.
That could cause a race and NULL pointer reference below:
CPU0 CPU1
------------------------------------------------------------------
dev_remove(param)
down_write(_hash_lock)
dm_lock_for_deletion(md)
spin_lock(_minor_lock)
set_bit(DMF_DELETING)
spin_unlock(_minor_lock)
__hash_remove(hc)
up_write(_hash_lock)
dev_status(param)
md = find_device(param)
down_read(_hash_lock)
__find_device_hash_cell(param)
dm_get_md(param->dev)
md = dm_find_md(dev)
spin_lock(_minor_lock)
md = idr_find(MINOR(dev))
spin_unlock(_minor_lock)
dm_put(md)
free_dev(md)
dm_get(md)
up_read(_hash_lock)
__dev_status(md, param)
dm_put(md)
Peter Rajnoha [Thu, 12 Aug 2010 03:13:53 +0000 (04:13 +0100)]
dm ioctl: return uevent flag after rename
All the dm ioctls that generate uevents set the DM_UEVENT_GENERATED flag so
that userspace knows whether or not to wait for a uevent to be processed
before continuing,
The dm rename ioctl sets this flag but was not structured to return it
to userspace. This patch restructures the rename ioctl processing to
behave like the other ioctls that return data and so fix this.
Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Peter Rajnoha [Thu, 12 Aug 2010 03:13:52 +0000 (04:13 +0100)]
dm ioctl: remove __dev_status from geometry and target message
Remove useless __dev_status call while processing an ioctl that sets up
device geometry and target message. The data is not returned to
userspace so there is no point collecting it and in the case of
target_message it is collected before processing the message so if it
did return it might be stale.
Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Thu, 12 Aug 2010 03:13:51 +0000 (04:13 +0100)]
dm snapshot: test chunk size against both origin and snapshot
Validate chunk size against both origin and snapshot sector size
Don't allow chunk size smaller than either origin or snapshot logical
sector size. Reading or writing data not aligned to sector size is not
allowed and causes immediate errors.
This requires us to open the origin before initialising the
exception store and to export dm_snap_origin.
Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Thu, 12 Aug 2010 03:13:50 +0000 (04:13 +0100)]
dm snapshot: iterate origin and cow devices
Iterate both origin and snapshot devices
iterate_devices method should call the callback for all the devices where
the bio may be remapped. Thus, snapshot_iterate_devices should call the callback
for both snapshot and origin underlying devices because it remaps some bios
to the snapshot and some to the origin.
snapshot_iterate_devices called the callback only for the origin device.
This led to badly calculated device limits if snapshot and origin were placed
on different types of disks.
Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Chris Wilson [Wed, 11 Aug 2010 13:41:16 +0000 (14:41 +0100)]
drm: Remove count_lock for calling lastclose() after 58474713 (v2)
When removing of the BKL the locking around lastclose() was rearranged
and resulted in the holding of the open_count spinlock over the call
into drm_lastclose(). The drivers were not ready for this path to be
atomic - it may indeed involve long waits to release old objects and
cleanup the GPU - and so we ended up scheduling whilst atomic.
v2: The spinlock is actually superfluous as access to open_count is
entirely serialised by drm_global_mutex and so can be dropped. The
count_lock spinlock instead appears to be used to protect access to
dev->buf_alloc and dev->buf_use.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
Oliver Hartkopp [Wed, 11 Aug 2010 23:12:35 +0000 (16:12 -0700)]
can: add limit for nframes and clean up signed/unsigned variables
This patch adds a limit for nframes as the number of frames in TX_SETUP and
RX_SETUP are derived from a single byte multiplex value by default.
Use-cases that would require to send/filter more than 256 CAN frames should
be implemented in userspace for complexity reasons anyway.
Additionally the assignments of unsigned values from userspace to signed
values in kernelspace and vice versa are fixed by using unsigned values in
kernelspace consistently.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Reported-by: Ben Hawkes <hawkes@google.com> Acked-by: Urs Thuermann <urs.thuermann@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
wanglei [Wed, 11 Aug 2010 08:38:04 +0000 (09:38 +0100)]
AFS: Implement an autocell mount capability [ver #2]
Implement the ability for the root directory of a mounted AFS filesystem to
accept lookups of arbitrary directory names, to interpet the names as the names
of cells, to look the cell names up in the DNS for AFSDB records and to mount
the root.cell volume of the nominated cell on the pseudo-directory created by
lookup.
This facility is requested by passing:
-o autocell
to the mountpoint for which this is desired, usually the /afs mount.
To use this facility, a DNS upcall program is required for AFSDB records. This
can be obtained from:
Wang Lei [Wed, 11 Aug 2010 08:37:58 +0000 (09:37 +0100)]
DNS: If the DNS server returns an error, allow that to be cached [ver #2]
If the DNS server returns an error, allow that to be cached in the DNS resolver
key in lieu of a value. Userspace passes the desired error number as an option
in the payload:
"#dnserror=<number>"
Userspace must map h_errno from the name resolution routines to an appropriate
Linux error before passing it up. Something like the following mapping is
recommended:
in lieu of Linux errors specifically for representing name service errors. The
filesystem must map these errors appropropriately before passing them to
userspace. AFS is made to map ENODATA and EAGAIN to EDESTADDRREQ for the
return to userspace; ECONNREFUSED is allowed to stand as is.
The error can be seen in /proc/keys as a negative number after the description
of the key. Compare, for example, the following key entries:
If the error option is supplied in the payload, the main part of the payload is
discarded. The key should have an expiry time set by userspace.
Signed-off-by: Wang Lei <wang840925@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Bryan Schumaker [Wed, 11 Aug 2010 08:37:53 +0000 (09:37 +0100)]
NFS: Use kernel DNS resolver [ver #2]
Use the kernel DNS resolver to translate hostnames to IP addresses. Create a
new config option to choose between the legacy DNS resolver and the new
resolver.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
Linus Torvalds [Wed, 11 Aug 2010 16:23:32 +0000 (09:23 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
isofs: Fix lseek() to position beyond 4 GB
vfs: remove unused MNT_STRICTATIME
vfs: show unreachable paths in getcwd and proc
vfs: only add " (deleted)" where necessary
vfs: add prepend_path() helper
vfs: __d_path: dont prepend the name of the root dentry
ia64: perfmon: add d_dname method
vfs: add helpers to get root and pwd
cachefiles: use path_get instead of lone dget
fs/sysv/super.c: add support for non-PDP11 v7 filesystems
V7: Adjust sanity checks for some volumes
Add v7 alias
v9fs: fixup for inode_setattr being removed
Manual merge to take Al's version of the fs/sysv/super.c file: it merged
cleanly, but Al had removed an unnecessary header include, so his side
was better.
Jean Delvare [Wed, 11 Aug 2010 16:21:01 +0000 (18:21 +0200)]
i2c: Use a separate mutex for userspace client lists
Moving userspace-instantiated clients to separate lists wasn't nearly
enough to avoid deadlocks in multiplexed bus cases. We also want to
have a dedicated mutex to protect each list.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Michael Lawnick <ml.lawnick@gmx.de>
Jean Delvare [Wed, 11 Aug 2010 16:21:00 +0000 (18:21 +0200)]
i2c: Make i2c_default_probe self-sufficient
Make i2c_default_probe self-sufficient, so that callers don't have to
do functionality checks themselves. This ensures everything is and
will stay consistent.
Jean Delvare [Wed, 11 Aug 2010 16:20:58 +0000 (18:20 +0200)]
i2c: Move adapter locking helpers to i2c-core
Uninline i2c adapter locking helper functions, move them to i2c-core,
and use them in i2c-core itself. The functions are still exported for
external users. This makes future updates to the locking model (which
will be needed for multiplexing support) possible and transparent.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Michael Lawnick <ml.lawnick@gmx.de>
Julia Lawall [Wed, 11 Aug 2010 16:20:55 +0000 (18:20 +0200)]
i2c-dev: Use memdup_user
Use memdup_user when user data is immediately copied into the allocated
region. Note that in the second case, the ++i is no longer necessary, as
the last value is already freed if needed by the call to memdup_user.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@
- to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+ to = memdup_user(from,size);
if (
- to==NULL
+ IS_ERR(to)
|| ...) {
<+... when != goto l1;
- -ENOMEM
+ PTR_ERR(to)
...+>
}
- if (copy_from_user(to, from, size) != 0) {
- <+... when != goto l2;
- -EFAULT
- ...+>
- }
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
Squashfs: fix checkpatch.pl warnings
Squashfs: fix filename typo
Squashfs: update Kconfig and documentation for LZO
Squashfs: fix block size use in LZO decompressor
Squashfs: Add LZO compression support
squashfs: fix filename in header comment
Squashfs: Make XATTR config name consistent with other file systems
squashfs: fix compiler inline warning
Linus Torvalds [Wed, 11 Aug 2010 16:19:43 +0000 (09:19 -0700)]
Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd
* 'for-linus' of git://git.open-osd.org/linux-open-osd:
exofs: Fix groups code when num_devices is not divisible by group_width
exofs: Remove useless optimization
exofs: exofs_file_fsync and exofs_file_flush correctness
exofs: Remove superfluous dependency on buffer_head and writeback
Linus Torvalds [Wed, 11 Aug 2010 16:18:32 +0000 (09:18 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (39 commits)
ceph: generalize mon requests, add pool op support
ceph: only queue async writeback on cap revocation if there is dirty data
ceph: do not ignore osd_idle_ttl mount option
ceph: constify dentry_operations
ceph: whitespace cleanup
ceph: add flock/fcntl lock support
ceph: define on-wire types, constants for file locking support
ceph: add CEPH_FEATURE_FLOCK to the supported feature bits
ceph: support v2 reconnect encoding
ceph: support v2 client_caps encoding
ceph: move AES iv definition to shared header
ceph: fix decoding of pool snap info
ceph: make ->sync_fs not wait if wait==0
ceph: warn on missing snap realm
ceph: print useful error message when crush rule not found
ceph: use %pU to print uuid (fsid)
ceph: sync header defs with server code
ceph: clean up header guards
ceph: strip misleading/obsolete version, feature info
ceph: specify supported features in super.h
...
Linus Torvalds [Wed, 11 Aug 2010 16:18:06 +0000 (09:18 -0700)]
Merge branch 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm
* 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
video: msm: Fix section mismatch in mddi.c.
drivers: video: msm: drop some unused variables
Linus Torvalds [Wed, 11 Aug 2010 16:17:27 +0000 (09:17 -0700)]
Merge branch 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6
* 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6:
IXP4xx: Fix LL debugging on little-endian CPU.
IXP4xx: Fix sparse warnings in I/O primitives.
IXP4xx: Make mdio_bus struct static in the Ethernet driver.
IXP4xx: Fix ixp4xx_crypto little-endian operation.
IXP4xx: Prevent HSS transmitter lockup by disabling FRaMe signals.
ixp4xx/vulcan: add PCI support
ixp4xx: base support for Arcom Vulcan
Linus Torvalds [Wed, 11 Aug 2010 16:13:19 +0000 (09:13 -0700)]
Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (226 commits)
ARM: 6323/1: cam60: don't use __init for cam60_spi_{flash_platform_data,partitions}
ARM: 6324/1: cam60: move cam60_spi_devices to .init.data
ARM: 6322/1: imx/pca100: Fix name of spi platform data
ARM: 6321/1: fix syntax error in main Kconfig file
ARM: 6297/1: move U300 timer to dynamic clock lookup
ARM: 6296/1: clock U300 intcon and timer properly
ARM: 6295/1: fix U300 apb_pclk split
ARM: 6306/1: fix inverted MMC card detect in U300
ARM: 6299/1: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID
ARM: 6294/1: etm: do a dummy read from OSSRR during initialization
ARM: 6292/1: coresight: add ETM management registers
ARM: 6288/1: ftrace: document mcount formats
ARM: 6287/1: ftrace: clean up mcount assembly indentation
ARM: 6286/1: fix Thumb-2 decompressor broken by "Auto calculate ZRELADDR"
ARM: 6281/1: video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE
ARM: 6280/1: imx: Fix build failure when including <mach/gpio.h> without <linux/spinlock.h>
ARM: S5PV210: Fix on missing s3c-sdhci card detection method for hsmmc3
ARM: S5P: Fix on missing S5P_DEV_FIMC in plat-s5p/Kconfig
ARM: S5PV210: Override FIMC driver name on Aquila board
ARM: S5PC100: enable FIMC on SMDKC100
...
Fix up conflicts in arch/arm/mach-{s5pc100,s5pv210}/cpu.c due to
different subsystem 'setname' calls, and trivial port types in
include/linux/serial_core.h
Stefani Seibold [Wed, 11 Aug 2010 01:03:37 +0000 (18:03 -0700)]
kfifo: fix kfifo miss use of nozami.c
There are different types of a fifo which can not handled in C without a
lot of overhead. So i decided to write the API as a set of macros, which
is the only way to do a kind of template meta programming without C++.
This macros handles the different types of fifos in a transparent way.
There are a lot of benefits:
- Compile time handling of the different fifo types
- Better performance (a save put or get of an integer does only generate
9 assembly instructions on a x86)
- Type save
- Cleaner interface, the additional kfifo_..._rec() functions are gone
- Easier to use
- Less error prone
- Different types of fifos: it is now possible to define a int fifo or
any other type. See below for an example.
- Smaller footprint for none byte type fifos
- No need of creating a second hidden variable, like in the old DEFINE_KFIFO
The API was not changed.
There are now real in place fifos where the data space is a part of the
structure. The fifo needs now 20 byte plus the fifo space. Dynamic
assigned or allocated create a little bit more code.
Most of the macros code will be optimized away and simple generate a
function call. Only the really small one generates inline code.
Additionally you can now create fifos for any data type, not only the
"unsigned char" byte streamed fifos.
There is also a new kfifo_put and kfifo_get function, to handle a single
element in a fifo. This macros generates inline code, which is lit bit
larger but faster.
I know that this kind of macros are very sophisticated and not easy to
maintain. But i have all tested and it works as expected. I analyzed the
output of the compiler and for the x86 the code is as good as hand written
assembler code. For the byte stream fifo the generate code is exact the
same as with the current kfifo implementation. For all other types of
fifos the code is smaller before, because the interface is easier to use.
The main goal was to provide an API which is very intuitive, save and easy
to use. So linux will get now a powerful fifo API which provides all what
a developer needs. This will save in the future a lot of kernel space,
since there is no need to write an own implementation. Most of the device
driver developers need a fifo, and also deep kernel development will gain
benefit from this API.
Here are the results of the text section usage:
Example 1:
kfifo_put/_get kfifo_in/out current kfifo
dynamic allocated 0x000002a8 0x00000291 0x00000299
in place 0x00000291 0x0000026e 0x00000273
kfifo.c new old
text section size 0x00000be5 0x000008b2
As you can see, kfifo_put/kfifo_get creates a little bit more code than
kfifo_in/kfifo_out, but it is much faster (the code is inline).
The code is complete hand crafted and optimized. The text section size is
as small as possible. You get all the fifo handling in only 3 kb. This
includes type safe fix size records, dynamic records and DMA handling.
This should be the final version. All requested features are implemented.
Note: Most features of this API doesn't have any users. All functions
which are not used in the next 9 months will be removed. So, please adapt
your drivers and other sources as soon as possible to the new API and post
it.
This are the features which are currently not used in the kernel:
Robert P. J. Day [Wed, 11 Aug 2010 01:03:34 +0000 (18:03 -0700)]
kfifo: kfifo_is_{full,empty} should return bools, not ints
For consistency with other kfifo routines, return bool, not int.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: Stefani Seibold <stefani@seibold.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lubomir Rintel [Wed, 11 Aug 2010 01:03:34 +0000 (18:03 -0700)]
fs/sysv/super.c: add support for non-PDP11 v7 filesystems
This adds byte order autodetection (of PDP-11 and LE filesystems). No
attempt is made to detect big-endian filesystems -- were there any?
Tested with PDP-11 v7 filesystems and PC-IX maintenance floppy.
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter [Wed, 11 Aug 2010 01:03:31 +0000 (18:03 -0700)]
kexec: return -EFAULT on copy_to_user() failures
copy_to/from_user() returns the number of bytes remaining to be copied.
It never returns a negative value. The correct return code is -EFAULT and
not -EIO.
All the callers check for non-zero returns so that's Ok, but the return
code is passed to the user so we should fix this.
Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Simon Kagstrom <simon.kagstrom@netinsight.net> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fr?d?ric Bri?re [Wed, 11 Aug 2010 01:03:30 +0000 (18:03 -0700)]
parport_serial: use the PCI IRQ if offered
Commit 51dcdfe ("parport: Use the PCI IRQ if offered") added IRQ support
for PCI parallel port devices handled by parport_pc, but turned it off for
parport_serial, despite a printk() message to the contrary.
Signed-off-by: Fr?d?ric Bri?re <fbriere@fbriere.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anton Blanchard [Wed, 11 Aug 2010 01:03:30 +0000 (18:03 -0700)]
lib/bug.c: add oops end marker to WARN implementation
We are missing the oops end marker for the exception based WARN implementation
in lib/bug.c. This is useful for logfile analysis tools.
Signed-off-by: Anton Blanchard <anton@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arjan van de Ven <arjan@infradead.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anton Blanchard [Wed, 11 Aug 2010 01:03:29 +0000 (18:03 -0700)]
lib/bug.c: make WARN implementation match the kernel/panic.c one
There are a few issues with the exception based WARN implementation in
lib/bug.c:
- Inconsistent printk flags. The "cut here" line is printed at KERN_EMERG, so
the console and all logged in users see the single line:
------------[ cut here ]------------
for each WARN. Fix this so we print everything at KERN_WARNING to match the
kernel/panic.c version.
- The lib/bug.c WARN would print "Badness at". Change it to match the
kernel/panic.c version which prints "WARNING: at".
- Print the list of modules, similar to kernel/panic.c of modules, similar to
kernel/panic.c
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Anton Blanchard <anton@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arjan van de Ven <arjan@infradead.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
TAMUKI Shoichi [Wed, 11 Aug 2010 01:03:28 +0000 (18:03 -0700)]
panic: keep blinking in spite of long spin timer mode
To keep panic_timeout accuracy when running under a hypervisor, the
current implementation only spins on long time (1 second) calls to mdelay.
That brings a good effect, but the problem is the keyboard LEDs don't
blink at all on that situation.
This patch changes to call to panic_blink_enter() between every mdelay and
keeps blinking in spite of long spin timer mode.
The time to call to mdelay is now 100ms. Even this change will keep
panic_timeout accuracy enough when running under a hypervisor.
Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
FUJITA Tomonori [Wed, 11 Aug 2010 01:03:25 +0000 (18:03 -0700)]
dma-mapping: remove dma_is_consistent API
Architectures implement dma_is_consistent() in different ways (some
misinterpret the definition of API in DMA-API.txt). So it hasn't been so
useful for drivers. We have only one user of the API in tree. Unlikely
out-of-tree drivers use the API.
Even if we fix dma_is_consistent() in some architectures, it doesn't look
useful at all. It was invented long ago for some old systems that can't
allocate coherent memory at all. It's better to export only APIs that are
definitely necessary for drivers.
Let's remove this API.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The above code tries to see if L1_CACHE_BYTES is greater than
dma_get_cache_alignment() on sysmtes that can not allocate coherent memory
(some old systems can't).
James Bottomley exmplained that this is necesary because the driver packs the
set of mailboxes into a single coherent area and separates the different
usages by a L1 cache stride. So it's fatal if the dma
He also pointed out that we can kill this checking because we don't hit this
BUG_ON on all architectures that actually use the driver.
(akpm: stolen from the scsi tree because
dma-mapping-remove-dma_is_consistent-api.patch needs it)
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
FUJITA Tomonori [Wed, 11 Aug 2010 01:03:23 +0000 (18:03 -0700)]
dma-mapping: parisc: set ARCH_DMA_MINALIGN
Architectures that handle DMA-non-coherent memory need to set
ARCH_DMA_MINALIGN to make sure that kmalloc'ed buffer is DMA-safe: the
buffer doesn't share a cache with the others.
dma_get_cache_alignment returns the minimum DMA alignment. Architectures
defines it as ARCH_DMA_MINALIGN (formally ARCH_KMALLOC_MINALIGN). So we
can unify dma_get_cache_alignment implementations.
Note that some architectures implement dma_get_cache_alignment wrongly.
dma_get_cache_alignment() should return the minimum DMA alignment. So
fully-coherent architectures should return 1. This patch also fixes this
issue.
FUJITA Tomonori [Wed, 11 Aug 2010 01:03:22 +0000 (18:03 -0700)]
dma-mapping: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN
Now each architecture has the own dma_get_cache_alignment implementation.
dma_get_cache_alignment returns the minimum DMA alignment. Architectures
define it as ARCH_KMALLOC_MINALIGN (it's used to make sure that malloc'ed
buffer is DMA-safe; the buffer doesn't share a cache with the others). So
we can unify dma_get_cache_alignment implementations.
This patch:
dma_get_cache_alignment() needs to know if an architecture defines
ARCH_KMALLOC_MINALIGN or not (needs to know if architecture has DMA
alignment restriction). However, slab.h define ARCH_KMALLOC_MINALIGN if
architectures doesn't define it.
Let's rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN.
ARCH_KMALLOC_MINALIGN is used only in the internals of slab/slob/slub
(except for crypto).