Marcel Holtmann [Sun, 28 Feb 2016 20:25:19 +0000 (21:25 +0100)]
Bluetooth: hci_uart: Add diag and address support for Intel/AG6xx
The AG6xx devices behave similar to Wilkens Peak and Stone Peak and with
that it is needed to check for Intel default address. In addition it is
possible to enable vendor events and diag support.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Alexander Aring [Fri, 26 Feb 2016 08:06:07 +0000 (09:06 +0100)]
6lowpan: iphc: fix invalid case handling
This patch fixes the return value in a case which should never occur.
Instead returning "-EINVAL" we return LOWPAN_IPHC_DAM_00 which is
invalid on context based addresses. Also change the WARN_ON_ONCE to
WARN_ONCE which was suggested by Dan Carpenter.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Loic Poulain [Mon, 22 Feb 2016 09:48:03 +0000 (10:48 +0100)]
Bluetooth: hci_uart: Add Intel/AG6xx support
This driver implements support for iBT2.1 Bluetooth controller embedded
in the AG620 communication combo. The controller needs to be configured
with bddata and can be patched with a binary patch file (pbn).
These operations are performed in manufacturing mode.
Alexander Aring [Wed, 24 Feb 2016 11:01:03 +0000 (12:01 +0100)]
6lowpan: iphc: fix stateful multicast compression
In case of multicast address we need to set always the LOWPAN_IPHC_M bit
and if a destination context identifier was found for a multicast
address then we need to set the LOWPAN_IPHC_DAC as well.
Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Mon, 22 Feb 2016 08:13:55 +0000 (09:13 +0100)]
ieee802154: 6lowpan: fix return of netdev notifier
This patch fixed the return value of netdev notifier. If the command is
a don't care a NOTIFY_DONE should be returned. If the command matched a
NOTIFY_OK should be returned.
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Mon, 22 Feb 2016 08:13:54 +0000 (09:13 +0100)]
6lowpan: iphc: add support for stateful compression
This patch introduce support for IPHC stateful address compression. It
will offer the context table via one debugfs entry.
This debugfs has and directory for each cid entry for the context table.
Inside each cid directory there exists the following files:
- "active": If the entry is added or deleted. The context table is
original a list implementation, this flag will indicate if the
context is part of list or not.
- "prefix": The ipv6 prefix.
- "prefix_length": The prefix length for the prefix.
- "compression": The compression flag according RFC6775.
This part should be moved into sysfs after some testing time.
Also the debugfs entry contains a "show" file which is a pretty-printout
for the current context table information.
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Fri, 19 Feb 2016 08:59:13 +0000 (09:59 +0100)]
at86rf230: fix state change handling on error
This patch force always to set "is_tx_from_off", when calibration
timeout was not occurred. In case of error handling the is_tx_from_off
can be inside in an invalid state.
Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Fri, 19 Feb 2016 08:59:12 +0000 (09:59 +0100)]
at86rf230: fix race on error handling
The resource "ctx" can be still used by at86rf230_async_state_change, we
need to free it at the complete handler of the async state change to
avoid a use after free.
Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Alexander Aring [Fri, 19 Feb 2016 08:59:11 +0000 (09:59 +0100)]
mac802154: fix mac header length check
I got report about that sometimes the WARN_ON occurs there which should
never happen. I came to the conclusion that the mac header is there but
inside the headroom of skb. The skb->len information doesn't contain the
information about the headroom length and skb->len is lesser than two.
We check now if the skb_mac_header pointer is set and the room between
mac header pointer and tail pointer.
Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Dan Carpenter [Tue, 23 Feb 2016 09:37:52 +0000 (12:37 +0300)]
rocker: fix rocker_world_port_obj_vlan_add()
We were changing return values and accidentally made
rocker_world_port_obj_vlan_add() into a no-op.
Fixes: fccd84d44912 ('rocker: return -EOPNOTSUPP for undefined world ops') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
"Looks like a lot, but mostly driver fixes scattered all over as usual.
Of note:
1) Add conditional sched in nf conntrack in cleanup to avoid NMI
watchdogs. From Florian Westphal.
2) Fix deadlock in nfnetlink cttimeout, also from Floarian.
3) Fix handling of slaves in bonding ARP monitor validation, from Jay
Vosburgh.
4) Callers of ip_cmsg_send() are responsible for freeing IP options,
some were not doing so. Fix from Eric Dumazet.
5) Fix per-cpu bugs in mvneta driver, from Gregory CLEMENT.
6) Fix vlan handling in mv88e6xxx DSA driver, from Vivien Didelot.
7) bcm7xxx PHY driver bug fixes from Florian Fainelli.
8) Avoid unaligned accesses to protocol headers wrt. GRE, from
Alexander Duyck.
9) SKB leaks and other problems in arc_emac driver, from Alexander
Kochetkov.
10) tcp_v4_inbound_md5_hash() releases listener socket instead of
request socket on error path, oops. Fix from Eric Dumazet.
11) Missing socket release in pppoe_rcv_core() that seems to have
existed basically forever. From Guillaume Nault.
12) Missing slave_dev unregister in dsa_slave_create() error path,
from Florian Fainelli.
13) crypto_alloc_hash() never returns NULL, fix return value check in
__tcp_alloc_md5sig_pool. From Insu Yun.
14) Properly expire exception route entries in ipv4, from Xin Long.
15) Fix races in tcp/dccp listener socket dismantle, from Eric
Dumazet.
16) Don't set IFF_TX_SKB_SHARING in vxlan, geneve, or GRE, it's not
legal. These drivers modify the SKB on transmit. From Jiri Benc.
17) Fix regression in the initialziation of netdev->tx_queue_len.
From Phil Sutter.
18) Missing unlock in tipc_nl_add_bc_link() error path, from Insu Yun.
19) SCTP port hash sizing does not properly ensure that table is a
power of two in size. From Neil Horman.
20) Fix initializing of software copy of MAC address in fmvj18x_cs
driver, from Ken Kawasaki"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (129 commits)
bnx2x: Fix 84833 phy command handler
bnx2x: Fix led setting for 84858 phy.
bnx2x: Correct 84858 PHY fw version
bnx2x: Fix 84833 RX CRC
bnx2x: Fix link-forcing for KR2
net: ethernet: davicom: fix devicetree irq resource
fmvj18x_cs: fix incorrect indexing of dev->dev_addr[] when copying the MAC address
Driver: Vmxnet3: Update Rx ring 2 max size
net: netcp: rework the code for get/set sw_data in dma desc
soc: ti: knav_dma: rename pad in struct knav_dma_desc to sw_data
net: ti: netcp: restore get/set_pad_info() functionality
MAINTAINERS: Drop myself as xen netback maintainer
sctp: Fix port hash table size computation
can: ems_usb: Fix possible tx overflow
Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skb
net: bcmgenet: Fix internal PHY link state
af_unix: Don't use continue to re-execute unix_stream_read_generic loop
unix_diag: fix incorrect sign extension in unix_lookup_by_ino
bnxt_en: Failure to update PHY is not fatal condition.
bnxt_en: Remove unnecessary call to update PHY settings.
...
Linus Torvalds [Mon, 22 Feb 2016 20:04:11 +0000 (12:04 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"One ocrdma fix:
- The new CQ API support was added to ocrdma, but they got the arming
logic wrong, so without this, transfers eventually fail when they
fail to arm the interrupt properly under load
Two related fixes for mlx4:
- When we added the 64bit extended counters support to the core IB
code, they forgot to update the RoCE side of the mlx4 driver (the
IB side they properly updated).
I debated whether or not to include these patches as they could be
considered feature enablement patches, but the existing code will
blindy copy the 32bit counters, whether any counters were requested
at all (a bug).
These two patches make it (a) check to see that counters were
requested and (b) copy the right counters (the 64bit support is
new, the 32bit is not). For that reason I went ahead and took
them"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/mlx4: Add support for the port info class for RoCE ports
IB/mlx4: Add support for extended counters over RoCE ports
RDMA/ocrdma: Fix arm logic to align with new cq API
Linus Torvalds [Mon, 22 Feb 2016 19:55:18 +0000 (11:55 -0800)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Some bugfixes from I2C for you:
A fix for a RuntimePM regression with OMAP, a fix to enable TCO for
Lewisburg platforms, and a typo fix while we are here"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i801: Adding Intel Lewisburg support for iTCO
i2c: uniphier: fix typos in error messages
i2c: omap: Fix PM regression with deferred probe for pm_runtime_reinit
Ray Bellis [Mon, 22 Feb 2016 10:02:40 +0000 (11:02 +0100)]
tools, bpf_asm: simplify parser rule for BPF extensions
We can already use yylval in the lexer for encoding the BPF extension
number, so that the parser rules can be further reduced to a single one
for each B/H/W case.
Signed-off-by: Ray Bellis <ray@isc.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Sudip Mukherjee [Mon, 22 Feb 2016 17:25:43 +0000 (22:55 +0530)]
netcp: use pointer to fix build fail
While building keystone_defconfig of arm we are getting build failure
with the error:
drivers/net/ethernet/ti/netcp_core.c:1846:31: error: invalid type argument of '->' (have 'struct tc_to_netdev')
if (handle != TC_H_ROOT || tc->type != TC_SETUP_MQPRIO)
^
drivers/net/ethernet/ti/netcp_core.c:1851:35: error: invalid type argument of '->' (have 'struct tc_to_netdev')
(dev->real_num_tx_queues < tc->tc))
^
drivers/net/ethernet/ti/netcp_core.c:1855:8: error: invalid type argument of '->' (have 'struct tc_to_netdev')
if (tc->tc) {
^
drivers/net/ethernet/ti/netcp_core.c:1856:28: error: invalid type argument of '->' (have 'struct tc_to_netdev')
netdev_set_num_tc(dev, tc->tc);
^
drivers/net/ethernet/ti/netcp_core.c:1857:21: error: invalid type argument of '->' (have 'struct tc_to_netdev')
for (i = 0; i < tc->tc; i++)
^
drivers/net/ethernet/ti/netcp_core.c: At top level:
drivers/net/ethernet/ti/netcp_core.c:1879:2: warning: initialization from incompatible pointer type
.ndo_setup_tc = netcp_setup_tc,
^
The callback of ndo_setup_tc should be:
int (*ndo_setup_tc)(struct net_device *dev, u32 handle, __be16 protocol,
struct tc_to_netdev *tc);
But we missed marking the last argument as a pointer.
Fixes: 16e5cc647173 ("net: rework setup_tc ndo op to consume general tc operand") CC: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Sun, 21 Feb 2016 13:07:26 +0000 (15:07 +0200)]
bnx2x: Fix 84833 RX CRC
There's a problem in current 84833 phy configuration -
in case 1Gb link is configured and jumbo-sized packets are being
used, device will experience RX crc errors.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 22 Feb 2016 03:49:16 +0000 (22:49 -0500)]
Merge branch 'qed-next'
Yuval Mintz says:
====================
qed*: Driver updates
This contains various minor changes to driver - changing memory allocation,
fixing a small theoretical bug, as well as some mostly-semantic changes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Sun, 21 Feb 2016 09:40:10 +0000 (11:40 +0200)]
qed: Introduce DMA_REGPAIR_LE
FW hsi contains regpairs, mostly for 64-bit address representations.
Since same paradigm is applied each time a regpair is filled, this
introduces a new utility macro for setting such regpairs.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Sun, 21 Feb 2016 09:40:09 +0000 (11:40 +0200)]
qed: Change metadata needed for SPQ entries
Each configuration element send via ramrod requires a Slow Path Queue
entry. This slightly changes the way such an entry is configured, but
contains mostly semantic changes [where more parameters are gathered
in a sub-struct instead of being directly passed].
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Sun, 21 Feb 2016 09:40:08 +0000 (11:40 +0200)]
qed: Handle possible race in SB config
Due to HW design, some of the memories are wide-bus and access to those
needs to be sequentialized on a per-HW-block level; Read/write to a
given HW-block might break other read/write to wide-bus memory done at
~same time.
Status blocks initialization in CAU is done into such a wide-bus memory.
This moves the initialization into using DMAE which is guaranteed to be
safe to use on such memories.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 22 Feb 2016 03:43:25 +0000 (22:43 -0500)]
Merge branch 'ipvlan-misc'
Mahesh Bandewar says:
====================
IPvlan misc patches
This is a collection of unrelated patches for IPvlan driver.
a. crub_skb() changes are added to ensure that the packets hit the
NF_HOOKS in masters' ns in L3 mode.
b. u16 change is bug fix while
c. the third patch is to group tx/rx variables in single cacheline
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mahesh Bandewar [Sun, 21 Feb 2016 03:31:41 +0000 (19:31 -0800)]
ipvlan: misc changes
1. scope correction for few functions that are used in single file.
2. Adjust variables that are used in fast-path to fit into single cacheline
3. Update rcv_frame() to skip shared check for frames coming over wire
Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mahesh Bandewar [Sun, 21 Feb 2016 03:31:36 +0000 (19:31 -0800)]
ipvlan: mode is u16
The mode argument was erronusly defined as u32 but it has always
been u16. Also use ipvlan_set_mode() helper to set the mode instead
of assigning directly. This should avoid future erronus assignments /
updates.
Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mahesh Bandewar [Sun, 21 Feb 2016 03:31:32 +0000 (19:31 -0800)]
ipvlan: scrub skb before routing in L3 mode.
Scrub skb before hitting the iptable hooks to ensure packets hit
these hooks. Set the xnet param only when the packet is crossing the
ns boundry so if the IPvlan slave and master belong to the same ns,
the param will be set to false.
Signed-off-by: Mahesh Bandewar <maheshb@google.com> CC: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The dm9000 driver doesn't work in at least one device-tree
configuration, spitting an error message on irq resource :
[ 1.062495] dm9000 8000000.ethernet: insufficient resources
[ 1.068439] dm9000 8000000.ethernet: not found (-2).
[ 1.073451] dm9000: probe of 8000000.ethernet failed with error -2
The reason behind is that the interrupt might be provided by a gpio
controller, not probed when dm9000 is probed, and needing the probe
deferral mechanism to apply.
Currently, the interrupt is directly taken from resources. This patch
changes this to use the more generic platform_get_irq(), which handles
the deferral.
Moreover, since commit Fixes: 7085a7401ba5 ("drivers: platform: parse
IRQ flags from resources"), the interrupt trigger flags are honored in
platform_get_irq(), so remove the needless code in dm9000.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Marcel Ziswiler <marcel@ziswiler.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Sergei Ianovich <ynvich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
this is a pull request of 9 patch for net-next/master.
The first 3 patches are from Damien Riegel, they add support for
Technologic Systems IP core to tje sja100 driver. The next patches 6 by
Marek Vasut (including one my me) first clean sort the CAN driver's
Kconfig and Makefiles and then add support for the IFI CANFD IP core.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 22 Feb 2016 03:07:11 +0000 (22:07 -0500)]
Merge branch 'bpf-helper-improvements'
Daniel Borkmann says:
====================
BPF updates
This set contains various updates for eBPF, i.e. the addition of a
generic csum helper function and other misc bits that mostly improve
existing helpers and ease programming with eBPF on cls_bpf. For more
details, please see individual patches.
Set is rebased on top of http://patchwork.ozlabs.org/patch/584465/.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 19 Feb 2016 22:05:27 +0000 (23:05 +0100)]
bpf: don't emit mov A,A on return
While debugging with bpf_jit_disasm I noticed emissions of 'mov %eax,%eax',
and found that this comes from BPF_RET | BPF_A translations from classic
BPF. Emitting this is unnecessary as BPF_REG_A is mapped into BPF_REG_0
already, therefore only emit a mov when immediates are used as return value.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 19 Feb 2016 22:05:26 +0000 (23:05 +0100)]
bpf: fix csum update in bpf_l4_csum_replace helper for udp
When using this helper for updating UDP checksums, we need to extend
this in order to write CSUM_MANGLED_0 for csum computations that result
into 0 as sum. Reason we need this is because packets with a checksum
could otherwise become incorrectly marked as a packet without a checksum.
Likewise, if the user indicates BPF_F_MARK_MANGLED_0, then we should
not turn packets without a checksum into ones with a checksum.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 19 Feb 2016 22:05:25 +0000 (23:05 +0100)]
bpf: try harder on clones when writing into skb
When we're dealing with clones and the area is not writeable, try
harder and get a copy via pskb_expand_head(). Replace also other
occurences in tc actions with the new skb_try_make_writable().
Reported-by: Ashhad Sheikh <ashhadsheikh394@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
We currently limit bpf_skb_store_bytes() and bpf_skb_load_bytes()
helpers to only store or load a maximum buffer of 16 bytes. Thus,
loading, rewriting and storing headers require several bpf_skb_load_bytes()
and bpf_skb_store_bytes() calls.
Also here we can use a per-cpu scratch buffer instead in order to not
pressure stack space any further. I do suspect that this limit was mainly
set in place for this particular reason. So, ease program development
by removing this limitation and make the scratchpad generic, so it can
be reused.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 19 Feb 2016 22:05:23 +0000 (23:05 +0100)]
bpf: add generic bpf_csum_diff helper
For L4 checksums, we currently have bpf_l4_csum_replace() helper. It's
currently limited to handle 2 and 4 byte changes in a header and feeds the
from/to into inet_proto_csum_replace{2,4}() helpers of the kernel. When
working with IPv6, for example, this makes it rather cumbersome to deal
with, similarly when editing larger parts of a header.
Instead, extend the API in a more generic way: For bpf_l4_csum_replace(),
add a case for header field mask of 0 to change the checksum at a given
offset through inet_proto_csum_replace_by_diff(), and provide a helper
bpf_csum_diff() that can generically calculate a from/to diff for arbitrary
amounts of data.
This can be used in multiple ways: for the bpf_l4_csum_replace() only
part, this even provides us with the option to insert precalculated diffs
from user space f.e. from a map, or from bpf_csum_diff() during runtime.
bpf_csum_diff() has a optional from/to stack buffer input, so we can
calculate a diff by using a scratchbuffer for scenarios where we're
inserting (from is NULL), removing (to is NULL) or diffing (from/to buffers
don't need to be of equal size) data. Also, bpf_csum_diff() allows to
feed a previous csum into csum_partial(), so the function can also be
cascaded.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 19 Feb 2016 22:05:22 +0000 (23:05 +0100)]
bpf: add new arg_type that allows for 0 sized stack buffer
Currently, when we pass a buffer from the eBPF stack into a helper
function, the function proto indicates argument types as ARG_PTR_TO_STACK
and ARG_CONST_STACK_SIZE pair. If R<X> contains the former, then R<X+1>
must be of the latter type. Then, verifier checks whether the buffer
points into eBPF stack, is initialized, etc. The verifier also guarantees
that the constant value passed in R<X+1> is greater than 0, so helper
functions don't need to test for it and can always assume a non-NULL
initialized buffer as well as non-0 buffer size.
This patch adds a new argument types ARG_CONST_STACK_SIZE_OR_ZERO that
allows to also pass NULL as R<X> and 0 as R<X+1> into the helper function.
Such helper functions, of course, need to be able to handle these cases
internally then. Verifier guarantees that either R<X> == NULL && R<X+1> == 0
or R<X> != NULL && R<X+1> != 0 (like the case of ARG_CONST_STACK_SIZE), any
other combinations are not possible to load.
I went through various options of extending the verifier, and introducing
the type ARG_CONST_STACK_SIZE_OR_ZERO seems to have most minimal changes
needed to the verifier.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 22 Feb 2016 03:05:50 +0000 (22:05 -0500)]
Merge branch 'geneve-vxlan-outer-checksum'
Alexander Duyck says:
====================
GENEVE/VXLAN: Enable outer Tx checksum by default
This patch series makes it so that we enable the outer Tx checksum for IPv4
tunnels by default. This makes the behavior consistent with how we were
handling this for IPv6. In addition I have updated the internal flags for
these tunnels so that we use a ZERO_CSUM_TX flag for IPv4 which should
match up will with the ZERO_CSUM6_TX flag which was already in use for
IPv6.
For most network devices this should be a net gain in terms of performance
as having the outer header checksum present allows for devices to report
CHECKSUM_UNNECESSARY which we can then convert to CHECKSUM_COMPLETE in order
to determine if the inner header checksum is valid.
Below is some data I collected with ixgbe with an X540 that demonstrates
this. I located two PFs connected back to back in two different name
spaces and then setup a pair of tunnels on each, one with checksum enabled
and one without.
Recv Send Send Utilization
Socket Socket Message Elapsed Send
Size Size Size Time Throughput local
bytes bytes bytes secs. 10^6bits/s % S
The one spot where this may cause a performance regression is if the
environment contains devices that can parse the inner headers and a device
supports NETIF_F_GSO_UDP_TUNNEL but not NETIF_F_GSO_UDP_TUNNEL_CSUM. In
the case of such a device we have to fall back to using GSO to segment the
tunnel instead of TSO and as a result we may take a performance hit as seen
below with i40e.
Recv Send Send Utilization
Socket Socket Message Elapsed Send
Size Size Size Time Throughput local
bytes bytes bytes secs. 10^6bits/s % S
In addition it will be necessary to update iproute2 so that we don't
provide the checksum attribute unless specified. This way on older kernels
which don't have local checksum offload we will default to disabling the
outer checksum, and on newer kernels that have LCO we can default to
enabling it.
I also haven't investigated the effect this will have on OVS. However I
suspect the impact should be minimal as the worst case scenario should be
that Tx checksumming will become enabled by default which should be
consistent with the existing behavior for IPv6.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Fri, 19 Feb 2016 19:26:31 +0000 (11:26 -0800)]
VXLAN: Support outer IPv4 Tx checksums by default
This change makes it so that if UDP CSUM is not specified we will default
to enabling it. The main motivation behind this is the fact that with the
use of outer checksum we can greatly improve the performance for VXLAN
tunnels on devices that don't know how to parse tunnel headers.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Fri, 19 Feb 2016 19:26:24 +0000 (11:26 -0800)]
GENEVE: Support outer IPv4 Tx checksums by default
This change makes it so that if UDP CSUM is not specified we will default
to enabling it. The main motivation behind this is the fact that with the
use of outer checksum we can greatly improve the performance for GENEVE
tunnels on hardware that doesn't know how to parse them.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This series fixes a regression and add some improvements for the ease
of maintainance. Incorporated comments against v1.
Changelogs:
v2 : combined 2-3 into one patch as this involves a header change
fixed a parse warning in 3/4 per comment from Arnd.
Removed Sign-off from Arnd against 1/4
added comments in 3/3 to alert on the usage of sw data per review
comments
v1 : added 2-4 to accomodate feedback received from review
v0 : initial version to fix the regression (From Grygorii)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: netcp: rework the code for get/set sw_data in dma desc
SW data field in descriptor can be used by software to hold private
data for the driver. As there are 4 words available for this purpose,
use separate macros to place it or retrieve the same to/from
descriptors. Also do type cast of data types accordingly.
Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Grygorii Strashko <grygorii.strashko@ti.com> CC: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
soc: ti: knav_dma: rename pad in struct knav_dma_desc to sw_data
Rename the pad to sw_data as per description of this field in the hardware
spec(refer sprugr9 from www.ti.com). Latest version of the document is
at http://www.ti.com/lit/ug/sprugr9h/sprugr9h.pdf and section 3.1
Host Packet Descriptor describes this field.
Define and use a constant for the size of sw_data field similar to
other fields in the struct for desc and document the sw_data field
in the header. As the sw_data is not touched by hw, it's type can be
changed to u32.
Rename the helpers to match with the updated dma desc field sw_data.
Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Grygorii Strashko <grygorii.strashko@ti.com> CC: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
The commit 899077791403 ("netcp: try to reduce type confusion in
descriptors") introduces a regression in Kernel 4.5-rc1 and it breaks
get/set_pad_info() functionality.
The TI NETCP driver uses pad0 and pad1 fields of knav_dma_desc to
store DMA/MEM buffer pointer and buffer size respectively. And in both
cases for Keystone 2 the pointer type size is 32 bit regardless of
LAPE enabled or not, because CONFIG_ARCH_DMA_ADDR_T_64BIT originally
is not expected to be defined.
Unfortunately, above commit changed buffer's pointers save/restore
code (get/set_pad_info()) and added intermediate conversation to u64
which works incorrectly on 32bit Keystone 2 and causes TI NETCP driver
crash in RX/TX path due to "Unable to handle kernel NULL pointer"
exception. This issue was reported and discussed in [1].
Hence, fix it by partially reverting above commit and restoring
get/set_pad_info() functionality as it was before.
[1] https://www.mail-archive.com/netdev@vger.kernel.org/msg95361.html Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> CC: David Laight <David.Laight@ACULAB.COM> CC: Arnd Bergmann <arnd@arndb.de> Reported-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 22 Feb 2016 03:00:28 +0000 (22:00 -0500)]
Merge branch 'lwt-autoload'
Robert Shearman says:
====================
lwtunnel: autoload of lwt modules
Changes since v1:
- remove "LWTUNNEL_ENCAP_" prefix for the string form of the encaps
used when requesting the module to reduce duplication, and don't
bother returning strings for lwt modules using netdevices, both
suggested by Jiri.
- update commit message of first patch to clarify security
implications, in response to Eric's comments.
The lwt implementations using net devices can autoload using the
existing mechanism using IFLA_INFO_KIND. However, there's no mechanism
that lwt modules not using net devices can use.
Therefore, these patches add the ability to autoload modules
registering lwt operations for lwt implementations not using a net
device so that users don't have to manually load the modules.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Shearman [Fri, 19 Feb 2016 09:43:16 +0000 (09:43 +0000)]
lwtunnel: autoload of lwt modules
The lwt implementations using net devices can autoload using the
existing mechanism using IFLA_INFO_KIND. However, there's no mechanism
that lwt modules not using net devices can use.
Therefore, add the ability to autoload modules registering lwt
operations for lwt implementations not using a net device so that
users don't have to manually load the modules.
Only users with the CAP_NET_ADMIN capability can cause modules to be
loaded, which is ensured by rtnetlink_rcv_msg rejecting non-RTM_GETxxx
messages for users without this capability, and by
lwtunnel_build_state not being called in response to RTM_GETxxx
messages.
Signed-off-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ian Campbell [Fri, 19 Feb 2016 11:44:51 +0000 (11:44 +0000)]
MAINTAINERS: Drop myself as xen netback maintainer
Wei has been picking this up for quite a while now.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Zhang Shengju [Thu, 18 Feb 2016 10:00:11 +0000 (10:00 +0000)]
vlan: turn on unicast filtering on vlan device
Currently vlan device inherits unicast filtering flag from underlying
device. If underlying device doesn't support unicast filter, this will
put vlan device into promiscuous mode when it's stacked.
Tun on IFF_UNICAST_FLT on the vlan device in any case so that it does
not go into promiscuous mode needlessly. If underlying device does not
support unicast filtering, that device will enter promiscuous mode.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Thu, 18 Feb 2016 21:10:57 +0000 (16:10 -0500)]
sctp: Fix port hash table size computation
Dmitry Vyukov noted recently that the sctp_port_hashtable had an error in
its size computation, observing that the current method never guaranteed
that the hashsize (measured in number of entries) would be a power of two,
which the input hash function for that table requires. The root cause of
the problem is that two values need to be computed (one, the allocation
order of the storage requries, as passed to __get_free_pages, and two the
number of entries for the hash table). Both need to be ^2, but for
different reasons, and the existing code is simply computing one order
value, and using it as the basis for both, which is wrong (i.e. it assumes
that ((1<<order)*PAGE_SIZE)/sizeof(bucket) is still ^2 when its not).
To fix this, we change the logic slightly. We start by computing a goal
allocation order (which is limited by the maximum size hash table we want
to support. Then we attempt to allocate that size table, decreasing the
order until a successful allocation is made. Then, with the resultant
successful order we compute the number of buckets that hash table supports,
which we then round down to the nearest power of two, giving us the number
of entries the table actually supports.
I've tested this locally here, using non-debug and spinlock-debug kernels,
and the number of entries in the hashtable consistently work out to be
powers of two in all cases.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> CC: Dmitry Vyukov <dvyukov@google.com> CC: Vladislav Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the problem that more CAN messages could be sent to the
interface as could be send on the CAN bus. This was more likely for slow baud
rates. The sleeping _start_xmit was woken up in the _write_bulk_callback. Under
heavy TX load this produced another bulk transfer without checking the
free_slots variable and hence caused the overflow in the interface.
Signed-off-by: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Linus Torvalds [Sat, 20 Feb 2016 17:32:40 +0000 (09:32 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"This is unusually large, partly due to the EFI fixes that prevent
accidental deletion of EFI variables through efivarfs that may brick
machines. These fixes are somewhat involved to maintain compatibility
with existing install methods and other usage modes, while trying to
turn off the 'rm -rf' bricking vector.
Other fixes are for large page ioremap()s and for non-temporal
user-memcpy()s"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix vmalloc_fault() to handle large pages properly
hpet: Drop stale URLs
x86/uaccess/64: Handle the caching of 4-byte nocache copies properly in __copy_user_nocache()
x86/uaccess/64: Make the __copy_user_nocache() assembly code more readable
lib/ucs2_string: Correct ucs2 -> utf8 conversion
efi: Add pstore variables to the deletion whitelist
efi: Make efivarfs entries immutable by default
efi: Make our variable validation list include the guid
efi: Do variable name validation tests in utf8
efi: Use ucs2_as_utf8 in efivarfs instead of open coding a bad version
lib/ucs2_string: Add ucs2 -> utf8 helper functions
Linus Torvalds [Sat, 20 Feb 2016 17:30:42 +0000 (09:30 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"A handful of CPU hotplug related fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Plug potential memory leak in CPU_UP_PREPARE
perf/core: Remove the bogus and dangerous CPU_DOWN_FAILED hotplug state
perf/core: Remove bogus UP_CANCELED hotplug state
perf/x86/amd/uncore: Plug reference leak
Linus Torvalds [Sat, 20 Feb 2016 17:22:11 +0000 (09:22 -0800)]
Merge tag 'powerpc-4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix build error on 32-bit with checkpoint restart from Aneesh Kumar
- Fix dedotify for binutils >= 2.26 from Andreas Schwab
- Don't trace hcalls on offline CPUs from Denis Kirjanov
- eeh: Fix stale cached primary bus from Gavin Shan
- eeh: Fix stale PE primary bus from Gavin Shan
- mm: Fix Multi hit ERAT cause by recent THP update from Aneesh Kumar K.V
- ioda: Set "read" permission when "write" is set from Alexey Kardashevskiy
* tag 'powerpc-4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/ioda: Set "read" permission when "write" is set
powerpc/mm: Fix Multi hit ERAT cause by recent THP update
powerpc/powernv: Fix stale PE primary bus
powerpc/eeh: Fix stale cached primary bus
powerpc/pseries: Don't trace hcalls on offline CPUs
powerpc: Fix dedotify for binutils >= 2.26
powerpc/book3s_32: Fix build error with checkpoint restart
Linus Torvalds [Sat, 20 Feb 2016 17:19:56 +0000 (09:19 -0800)]
Merge tag 'dmaengine-fix-4.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"A few fixes for drivers, nothing major here.
Fixes are: iotdma fix to restart channels, new ID for wildcat PCH,
residue fix for edma, disable irq for non-cyclic in dw"
* tag 'dmaengine-fix-4.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer
dmaengine: edma: fix residue race for cyclic
dmaengine: dw: pci: add ID for WildcatPoint PCH
dmaengine: IOATDMA: fix timer code that continues to restart channels during idle
Linus Torvalds [Sat, 20 Feb 2016 17:16:51 +0000 (09:16 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
"An assortment of vendor specific clk drivers fixes, most notably
fallout from adding Tegra210 and rockchip rk3036/rk3368 drivers this
cycle.
There's also the random smattering of sparse/checker fixes, a build
"fix" to get the Tango clk driver to compile because the Kconfig
symbol was renamed after the fact, and a clk gpio fix for a patch
mismerge"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (28 commits)
clk: gpio: Really allow an optional clock= DT property
Revert "clk: qcom: Specify LE device endianness"
clk: versatile: mask VCO bits before writing
clk: tegra: super: Fix sparse warnings for functions not declared as static
clk: tegra: Fix sparse warnings for functions not declared as static
clk: tegra: Fix sparse warning for pll_m
clk: tegra: Use definition for pll_u override bit
clk: tegra: Fix warning caused by pll_u failing to lock
clk: tegra: Fix clock sources for Tegra210 EMC
clk: tegra: Add the APB2APE audio clock on Tegra210
clk: tegra: Add missing of_node_put()
clk: tegra: Fix PLLE SS coefficients
clk: tegra: Fix typos around clearing PLLE bits during enable
clk: tegra: Do not disable PLLE when under hardware control
clk: tegra: Fix pllx dyn step calculation
clk: tegra: pll: Fix potential sleeping-while-atomic
clk: tegra: Fix the misnaming of nvenc from msenc
clk: tegra: Fix naming of MISC registers
clk: tango4: rename ARCH_TANGOX to ARCH_TANGO
clk: scpi: Fix checking return value of platform_device_register_simple()
...
Linus Torvalds [Sat, 20 Feb 2016 17:13:18 +0000 (09:13 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull more drm fixes from Dave Airlie:
"Some more fixes trickled in:
A bunch of VC4 ones since it's a pretty new driver not much chance of
regressions, and it fixes GPU resets.
Also one atomic fix, one set of fixes for a common bug in TTM cleanup,
and one i915 hotplug fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: use post-decrement in error handling
drm/atomic: Allow for holes in connector state, v2.
drm/i915: Fix hpd live status bits for g4x
drm/vc4: Use runtime PM to power cycle the device when the GPU hangs.
drm/vc4: Enable runtime PM.
drm/vc4: Fix spurious GPU resets due to BO reuse.
drm/vc4: Drop error message on seqno wait timeouts.
drm/vc4: Fix -ERESTARTSYS error return from BO waits.
drm/vc4: Return an ERR_PTR from BO creation instead of NULL.
drm/vc4: Fix the clear color for the first tile rendered.
drm/vc4: Validate that WAIT_BO padding is cleared.
drm/radeon: use post-decrement in error handling
drm/amdgpu: use post-decrement in error handling
Simon Guinot [Wed, 9 Sep 2015 22:15:18 +0000 (00:15 +0200)]
kernel/resource.c: fix muxed resource handling in __request_region()
In __request_region, if a conflict with a BUSY and MUXED resource is
detected, then the caller goes to sleep and waits for the resource to be
released. A pointer on the conflicting resource is kept. At wake-up
this pointer is used as a parent to retry to request the region.
A first problem is that this pointer might well be invalid (if for
example the conflicting resource have already been freed). Another
problem is that the next call to __request_region() fails to detect a
remaining conflict. The previously conflicting resource is passed as a
parameter and __request_region() will look for a conflict among the
children of this resource and not at the resource itself. It is likely
to succeed anyway, even if there is still a conflict.
Instead, the parent of the conflicting resource should be passed to
__request_region().
As a fix, this patch doesn't update the parent resource pointer in the
case we have to wait for a muxed region right after.
Reported-and-tested-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Tested-by: Vincent Donnefort <vdonnefort@gmail.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Marek Vasut [Wed, 20 Jan 2016 14:33:39 +0000 (15:33 +0100)]
can: ifi: Add IFI CANFD IP support
The patch adds support for IFI CAN/FD controller [1]. This driver
currently supports sending and receiving both standard CAN and new
CAN/FD frames. Both ISO and BOSCH variant of CAN/FD is supported.
[1] http://www.ifi-pld.de/IP/CANFD/canfd.html
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marek Vasut [Mon, 11 Jan 2016 18:48:02 +0000 (19:48 +0100)]
can: ifi: Add DT bindings for ifi,canfd
Add device tree bindings for the I/F/I CANFD controller IP core.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marek Vasut [Mon, 11 Jan 2016 18:48:01 +0000 (19:48 +0100)]
of: Add vendor prefix for I/F/I
Add vendor prefix for I/F/I, Ingenieurbüro Für IC-Technologie
http://www.ifi-pld.de/
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marek Vasut [Mon, 11 Jan 2016 18:48:00 +0000 (19:48 +0100)]
can: Makefile: Sort the Makefile
Just sort the drivers in the Makefile, no functional change.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marek Vasut [Mon, 11 Jan 2016 18:47:59 +0000 (19:47 +0100)]
can: Kconfig: Sort the Kconfig includes
Sort the Kconfig includes, no functional change.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Damien Riegel [Tue, 12 Jan 2016 22:31:20 +0000 (17:31 -0500)]
can: sja1000: of: add compatibility with Technologic Systems version
Technologic Systems provides an IP compatible with the SJA1000,
instantiated in an FPGA. Because of some bus widths issue, access to
registers is made through a "window" that works like this:
base + 0x0: address to read/write
base + 0x2: 8-bit register value
This commit adds a new compatible device, "technologic,sja1000", with
read and write functions using the window mechanism.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Damien Riegel [Tue, 12 Jan 2016 22:31:19 +0000 (17:31 -0500)]
can: sja1000: add documentation for Technologic Systems version
This commit adds documentation for the Technologic Systems version of
SJA1000. The difference with the NXP version is in the way the registers
are accessed.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Damien Riegel [Tue, 12 Jan 2016 22:31:18 +0000 (17:31 -0500)]
can: sja1000: of: add per-compatible init hook
This commit adds the capability to allocate and init private data
embedded in the sja1000_priv structure on a per-compatible basis. The
device node is passed as a parameter of the init callback to allow
parsing of custom device tree properties.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Douglas Anderson [Fri, 19 Feb 2016 22:25:21 +0000 (14:25 -0800)]
Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skb
In commit 44d271377479 ("Bluetooth: Compress the size of struct
hci_ctrl") we squashed down the size of the structure by using a union
with the assumption that all users would use the flag to determine
whether we had a req_complete or a req_complete_skb.
Unfortunately we had a case in hci_req_cmd_complete() where we weren't
looking at the flag. This can result in a situation where we might be
storing a hci_req_complete_skb_t in a hci_req_complete_t variable, or
vice versa.
During some testing I found at least one case where the function
hci_req_sync_complete() was called improperly because the kernel thought
that it didn't require an SKB. Looking through the stack in kgdb I
found that it was called by hci_event_packet() and that
hci_event_packet() had both of its locals "req_complete" and
"req_complete_skb" pointing to the same place: both to
hci_req_sync_complete().
Let's make sure we always check the flag.
For more details on debugging done, see <http://crbug.com/588288>.
Fixes: 44d271377479 ("Bluetooth: Compress the size of struct hci_ctrl") Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
David S. Miller [Sat, 20 Feb 2016 05:21:44 +0000 (00:21 -0500)]
Merge branch 'bpf-get-stackid'
Alexei Starovoitov says:
====================
bpf_get_stackid() and stack_trace map
This patch set introduces new map type to store stack traces and
corresponding bpf_get_stackid() helper.
BPF programs already can walk the stack via unrolled loop
of bpf_probe_read()s which is ok for simple analysis, but it's
not efficient and limited to <30 frames after that the programs
don't fit into MAX_BPF_STACK. With bpf_get_stackid() helper
the programs can collect up to PERF_MAX_STACK_DEPTH both
user and kernel frames.
Using stack traces as a key in a map turned out to be very useful
for generating flame graphs, off-cpu graphs, waker and chain graphs.
Patch 3 is a simplified version of 'offwaketime' tool which is
described in detail here:
http://brendangregg.com/blog/2016-02-01/linux-wakeup-offwake-profiling.html
Earlier version of this patch were using save_stack_trace() helper,
but 'unreliable' frames add to much noise and two equiavlent
stack traces produce different 'stackid's.
Using lockdep style of storing frames with MAX_STACK_TRACE_ENTRIES is
great for lockdep, but not acceptable for bpf, since the stack_trace
map needs to be freed when user Ctrl-C the tool.
The ftrace style with per_cpu(struct ftrace_stack) is great, but it's
tightly coupled with ftrace ring buffer and has the same 'unreliable'
noise. perf_event's perf_callchain() mechanism is also very efficient
and it only needed minor generalization which is done in patch 1
to be used by bpf stack_trace maps.
Peter, please take a look at patch 1.
If you're ok with it, I'd like to take the whole set via net-next.
Patch 1 - generalization of perf_callchain()
Patch 2 - stack_trace map done as lock-less hashtable without link list
to avoid spinlock on insertion which is critical path when
bpf_get_stackid() helper is called for every task switch event
Patch 3 - offwaketime example
After the patch the 'perf report' for artificial 'sched_bench'
benchmark that doing pthread_cond_wait/signal and 'offwaketime'
example is running in the background:
16.35% swapper [kernel.vmlinux] [k] intel_idle
2.18% sched_bench [kernel.vmlinux] [k] __switch_to
2.18% sched_bench libpthread-2.12.so [.] pthread_cond_signal@@GLIBC_2.3.2
1.72% sched_bench libpthread-2.12.so [.] pthread_mutex_unlock
1.53% sched_bench [kernel.vmlinux] [k] bpf_get_stackid
1.44% sched_bench [kernel.vmlinux] [k] entry_SYSCALL_64
1.39% sched_bench [kernel.vmlinux] [k] __call_rcu.constprop.73
1.13% sched_bench libpthread-2.12.so [.] pthread_mutex_lock
1.07% sched_bench libpthread-2.12.so [.] pthread_cond_wait@@GLIBC_2.3.2
1.07% sched_bench [kernel.vmlinux] [k] hash_futex
1.05% sched_bench [kernel.vmlinux] [k] do_futex
1.05% sched_bench [kernel.vmlinux] [k] get_futex_key_refs.isra.13
The hotest part of bpf_get_stackid() is inlined jhash2, so we may consider
using some faster hash in the future, but it's good enough for now.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is simplified version of Brendan Gregg's offwaketime:
This program shows kernel stack traces and task names that were blocked and
"off-CPU", along with the stack traces and task names for the threads that woke
them, and the total elapsed time from when they blocked to when they were woken
up. The combined stacks, task names, and total time is summarized in kernel
context for efficiency.
Example:
$ sudo ./offwaketime | flamegraph.pl > demo.svg
Open demo.svg in the browser as FlameGraph visualization.
Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
add new map type to store stack traces and corresponding helper
bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id
@ctx: struct pt_regs*
@map: pointer to stack_trace map
@flags: bits 0-7 - numer of stack frames to skip
bit 8 - collect user stack instead of kernel
bit 9 - compare stacks by hash only
bit 10 - if two different stacks hash into the same stackid
discard old
other bits - reserved
Return: >= 0 stackid on success or negative error
stackid is a 32-bit integer handle that can be further combined with
other data (including other stackid) and used as a key into maps.
Userspace will access stackmap using standard lookup/delete syscall commands to
retrieve full stack trace for given stackid.
Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / karo-tx-linux.git / log