pcmcia: move unbind/rebind into dev_pm_ops.complete
Move the device rebind procedures for cardbus devices from the pm.resume
into the pm.complete callback.
The reason for moving the code is: "[...] The PM code needs to send
suspend and resume messages to every device in the right order, and it
can't do that if new devices are being added at the same time. [...]"
However the situation really isn't quite that rigid. In particular,
adding new children during a resume callback shouldn't cause much of
problem because the children don't need to be resumed anyway (since they
were never suspended). On the other hand, if you do it you will get a
dev_warn() from the PM core, something like 'parent should not be
sleeping'.
Still, it is considered bad form and should be avoided if possible."
(Alan Stern's full comment about the topic can
be found here: <https://lkml.org/lkml/2012/7/10/254>)
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg KH <greg@kroah.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fabio Estevam [Tue, 14 Aug 2012 03:22:27 +0000 (13:22 +1000)]
drivers/dma/dmaengine.c: lower the priority of 'failed to get' dma channel message
Do the same as commit a03a202e9 ("dmaengine: failure to get a specific DMA
channel is not critical") to get rid of the following messages during
kernel boot:
dmaengine_get: failed to get dma1chan0: (-22)
dmaengine_get: failed to get dma1chan1: (-22)
dmaengine_get: failed to get dma1chan2: (-22)
dmaengine_get: failed to get dma1chan3: (-22)
dmaengine_get: failed to get dma1chan4: (-22)
dmaengine_get: failed to get dma1chan5: (-22)
dmaengine_get: failed to get dma1chan6: (-22)
dmaengine_get: failed to get dma1chan7: (-22)
dmaengine_get: failed to get dma1chan8: (-22)
dmaengine_get: failed to get dma1chan9: (-22)
dmaengine_get: failed to get dma1chan10: (-22)
dmaengine_get: failed to get dma1chan11: (-22)
dmaengine_get: failed to get dma1chan12: (-22)
dmaengine_get: failed to get dma1chan13: (-22)
dmaengine_get: failed to get dma1chan14: (-22)
dmaengine_get: failed to get dma1chan15: (-22)
dmaengine_get: failed to get dma1chan16: (-22)
dmaengine_get: failed to get dma1chan17: (-22)
dmaengine_get: failed to get dma1chan18: (-22)
dmaengine_get: failed to get dma1chan19: (-22)
dmaengine_get: failed to get dma1chan20: (-22)
dmaengine_get: failed to get dma1chan21: (-22)
dmaengine_get: failed to get dma1chan22: (-22)
dmaengine_get: failed to get dma1chan23: (-22)
dmaengine_get: failed to get dma1chan24: (-22)
dmaengine_get: failed to get dma1chan25: (-22)
dmaengine_get: failed to get dma1chan26: (-22)
dmaengine_get: failed to get dma1chan27: (-22)
dmaengine_get: failed to get dma1chan28: (-22)
dmaengine_get: failed to get dma1chan29: (-22)
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Shérab [Tue, 14 Aug 2012 03:22:26 +0000 (13:22 +1000)]
arch/x86/platform/iris/iris.c: register a platform device and a platform driver
This makes the iris driver use the platform API, so it is properly exposed
in /sys.
[akpm@linux-foundation.org: remove commented-out code, add missing space to printk, clean up code layout] Signed-off-by: Shérab <Sebastien.Hinderer@ens-lyon.org> Cc: Len Brown <lenb@kernel.org> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wen Congyang [Tue, 14 Aug 2012 03:22:25 +0000 (13:22 +1000)]
acpi_memhotplug.c: auto bind the memory device which is hotplugged before the driver is loaded
If the memory device is hotplugged before the driver is loaded, the user
cannot see this device under the directory /sys/bus/acpi/devices/, and the
user cannot bind it by hand after the driver is loaded. This patch
introduces a new feature to bind such device when the driver is being
loaded.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: Len Brown <lenb@kernel.org> Cc: "Brown, Len" <len.brown@intel.com> Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wen Congyang [Tue, 14 Aug 2012 03:22:25 +0000 (13:22 +1000)]
acpi_memhotplug.c: bind the memory device when the driver is being loaded
We had introduced acpi_hotmem_initialized to avoid strange add_memory fail
message. But the memory device may not be used by the kernel, and the
device should be bound when the driver is being loaded. Remove
acpi_hotmem_initialized to allow that the device can be bound when the
driver is being loaded.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: Len Brown <lenb@kernel.org> Cc: "Brown, Len" <len.brown@intel.com> Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wen Congyang [Tue, 14 Aug 2012 03:22:24 +0000 (13:22 +1000)]
acpi_memhotplug.c: free memory device if acpi_memory_enable_device() failed
If acpi_memory_enable_device() fails, acpi_memory_enable_device() will
return a non-zero value, which means we fail to bind the memory device to
this driver. So we should free memory device before
acpi_memory_device_add() returns.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: Len Brown <lenb@kernel.org> Cc: "Brown, Len" <len.brown@intel.com> Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Delete code which sets SCSI status incorrectly as it's already been set
correctly above this incorrect code. Bug was introduced by b0e15f6db1110
("cciss: fix typo that causes scsi status to be lost.") in 2009.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Reported-by: Roel van Meer <roel.vanmeer@bokxing.nl> Tested-by: Roel van Meer <roel.vanmeer@bokxing.nl> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hugh Dickins [Tue, 14 Aug 2012 03:22:23 +0000 (13:22 +1000)]
mm: change nr_ptes BUG_ON to WARN_ON
Occasionally an isolated BUG_ON(mm->nr_ptes) gets reported, indicating
that not all the page tables allocated could be found and freed when
exit_mmap() tore down the user address space.
There's usually nothing we can say about it, beyond that it's probably a
sign of some bad memory or memory corruption; though it might still
indicate a bug in vma or page table management (and did recently reveal a
race in THP, fixed a few months ago).
But one overdue change we can make is from BUG_ON to WARN_ON.
It's fairly likely that the system will crash shortly afterwards in some
other way (for example, the BUG_ON(page_mapped(page)) in
__delete_from_page_cache(), once an inode mapped into the lost page tables
gets evicted); but might tell us more before that.
Change the BUG_ON(page_mapped) to WARN_ON too? Later perhaps: I'm less
eager, since that one has several times led to fixes.
Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / karo-tx-linux.git / log