staging: comedi: comedi_test: saturate fake waveform values

While an asynchronous command is running on the analog input subdevice,
fake waveform generators are connected to each channel to provide the
input voltages that are converted to sample value.  Channel 0 is
connected to a sawtooth generator, channel 1 is connected to a
squarewave generator, and the remaining channels are connected to a
flatline generator.  The non-flatline generators share the same
amplitude (in microvolts) and period (in microseconds) which are
configured when the COMEDI device is attached.  All waveforms are
centered around 0 microvolts and the non-flatline waveforms go between
-amplitude and +amplitude.

It is possible for the waveforms to swing outside the input range of the
channels to which they are connected.  When that happens, the sample
values resulting from simulated A-to-D conversion will wrap around due
to integer overflow.  Prevent that by clamping the sample values that
would go out of range.  This is closer to how a real hardware device
would behave (assuming the input voltage is not high enough to damage
the hardware!).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_test: reformat multi-line comments

Use the preferred style for multi-line comments.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: remove exclusive wait_queue

This patch removes the unnecessary wait_queue that has exclusively been
used for the poll function and its poll_table. Instead, an already
existing one is used.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-dim2: use min_t()

This patch replaces the usage of min() by min_t().

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: accel: add bracket on all branches of the if/else

This patch adds brackets on all of the conditional branches in
order to follow the linux coding style.

Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: accel: place logical operators on the previous line

This patch moves the logical operators on the previous line in order
to follow the linux coding style.

Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: accel: remove unwanted blank lines

This patch removes unwanted blank lines in order to follow
the linux coding style.

Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: accel: fix block comments alignment

This patch properly aligns the block comment in order
to follow the linux coding style convetions.

Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: accel: add blank lines after function definitions

This patch add blank lines after functions definitions in
order to follow the linux coding style.

Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: accel: change uint8_t to u8

This patch changes uint8_t type to preferred kernel
type u8 in order to follow the linux coding style
conventions.

Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: accel: properly align function arguments

This patch properly aligns the function arguments or
its parameters in order to match the open bracket.

Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: accel: add spaces aroung binary operators

This patch adds spaces around binary operators such as '*',
'/', '+' in order to improve readability.

Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wilc1000: Prefer eth_broadcast_addr over memset()

This patch is to the host_interface.c that fixes up following
warning by checkpatch:

-prefer eth_broadcast_addr() over memset()

Signed-off-by: Punit Vara <punitvara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 characters

This patch fixes line over 80 characters found by checkpatch.

WARNING: line over 80 characters
FILE: drivers/staging/wilc1000/host_interface.h:424:

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: replace kmalloc/memcpy with kmemdup

This patch replaces kmalloc followed by memcpy with kmemdup.
It is also added error checking to return -ENOMEM when kmemdup is
failed.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename tenuAuth_type in host_int_add_wep_key_bss_ap

This patch changes tenuAuth_type to auth_type that is sixth argument of
this function to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8mode in host_int_add_wep_key_bss_ap

This patch changes u8mode to mode that is fifth argument of this
function to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8Keyidx in host_int_add_wep_key_bss_ap

This patch changes u8Keyidx to index that is fourth argument of this
function to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8WepKeylen in host_int_add_wep_key_bss_ap

This patch changes u8WepKeylen to len that is third argument of this
function to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8WepKey in host_int_add_wep_key_bss_ap

This patch changes pu8WepKey to key that is second argument of this
function to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: replace u8 with int.

This patch changes data type of variable i from u8 to int.
It is used as index of an array to print its content. It's better
to use as data type of int.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix parameter name of function declaration

This patch changes struct host_if_drv of host_int_add_wep_key_bss_ap
function declaration from hWFIDrv to hif_drv.
With this change, first parameter name of this function declaration and
definition has same name as hif_drv.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix return type of host_int_add_wep_key_bss_ap

This patch changes return type of host_int_add_wep_key_bss_ap from s32
to int. The result variable gets return value from wilc_mq_send that has
return type of int. It should be changed return type of this function as
well as data type of result variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 characters

This patch fixes line over 80 characters found by checkpatch.

WARNING: line over 80 characters
FILE: drivers/staging/wilc1000/host_interface.h:408:

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: replace kmalloc/memcpy with kmemdup

This patch replaces kmalloc followed by memcpy with kmemdup.
It is also added error checking of kmemdup.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8Keyidx in host_int_add_wep_key_bss_sta

This patch changes u8Keyidx to index that is fourth argument of
host_int_add_wep_key_bss_sta to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8WepKeylen in host_int_add_wep_key_bss_sta

This patch changes u8WepKeylen to len that is third argument of
host_int_add_wep_key_bss_sta to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8WepKey in host_int_add_wep_key_bss_sta

This patch changes pu8WepKey to key that is second argument of
host_int_add_wep_key_bss_sta to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix parameter name of function declaration

This patch changes struct host_if_drv of host_int_add_wep_key_bss_sta
function declaration from hWFIDrv to hif_drv.
With this change, first parameter name of this function declaration and
definition has same name as hif_drv.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix return type of host_int_add_wep_key_bss_sta

This patch changes return type of host_int_add_wep_key_bss_sta from s32
to int. The result variable gets return value from wilc_mq_send that has
return type of int. It should be changed return type of this function
as well as data type of result variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wilc1000: wilc_wfi_cfgoperations: Remove irrelevant wrapper function

Remove the wrapper function WILC_WFI_add_wilcvendorspec() and replace
its call with memcpy().

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wilc1000: coreconfigurator: Remove trailing whitespace

In block comments, trailing whitespaces should be removed.
Fix checkpatch ERROR: trailing whitespace

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8RemainOnChan_pendingreq of struct host_if_drv

This patch renames u8RemainOnChan_pendingreq of struct host_if_drv to
remain_on_ch_pending to avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename strHostIfRemainOnChan of struct host_if_drv

This patch renames strHostIfRemainOnChan of struct host_if_drv to remain_on_ch
to avoid CamelCase naming convention.
And, remove the relation comment.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename strWILC_UsrConnReq of struct host_if_drv

This patch renames strWILC_UsrConnReq of struct host_if_drv to usr_conn_req
to avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename strWILC_UsrScanReq of struct host_if_drv

This patch renames strWILC_UsrScanReq of struct host_if_drv to usr_scan_req
to avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8MacAddress of struct get_mac_addr

This patch renames u8MacAddress of struct get_mac_addr to mac_addr
to avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8MacAddress of struct set_mac_addr

This patch renames u8MacAddress of struct set_mac_addr to mac_addr
to avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32Mode of struct op_mode

This patch renames u32Mode of struct op_mode to mode
to avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32Address of struct drv_handler

This patch renames u32Address of struct drv_handler to handler
to avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename variable strWID

This patch renames variable strWID to wid
to avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename au8StartTime of struct join_bss_param

This patch renames au8StartTime of struct join_bss_param to start_time
to avoid CamelCase naming convention.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: host_interface: removes unused functions

This patch removes unused functions at host_interface files.
 - host_int_send_join_leave_info_to_host
 - host_int_send_network_info_to_host

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fixes please don't use multiple blank lines

This patch fixes the checks reported by checkpatch.pl
for Please don't use multiple blank lines.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fixes missing a blank line after declarations

This patch fixes the warnings reported by checkpatch.pl
for Missing a blank line after declarations.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fixes blank lines aren't necessary brace

This patch fixes the checks reported by checkpatch.pl
for Blank lines aren't necessary after an open brace '{' and
Blank lines aren't necessary before a close brace '}'.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fixes braces {} are not necessary for single statement blocks

This patch fixes the warnings reported by checkpatch.pl
for braces {} are not necessary for single statement blocks

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove unnecessary parentheses around

This patch removes the checks reported by checkpatch.pl
for unnecessary parentheses around.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: change MAINTAINERS

This patch removes Rachel Kim from the MAINTAINERS list because she
retires from her position and adds Austin shin as new MAINTAINER for
the Atmel wireless link controller: WILC1000 and WILC3000.

Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_msgqueue.c : remove goto statement

This patch removes goto statement and moves the spin lock position.
If a memory allocation fails, directly returns an error.
The spin lock actually protects the pHandle. Therefore, call spin lock just
before pHandle is used.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: tcp_process: add argument dev and use private data

This patch adds new argument net_device and use netdev private data member
wilc instead of g_linux_wlan. Pass argument dev to the function as well.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wlan_txq_add_net_pkt: add argument struct net_device

This patch add new argument struct net_device *dev and pass net_device to
wilc_wlan_txq_add_net_pkt.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: mac_xmit: use netdev private wilc instead of g_linux_wlan

This patch uses netdev private data member wilc instead of g_linux_wlan.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wlan_txq_get_next: add argument wilc

This patch adds new argument struct wilc and use wilc instead of g_linux_wlan.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wlan_rxq_add: add argument wilc and use it

This patch adds new argument struct wilc and use it instead of g_linux_wlan.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Set_machw_change_vir_if: add argument struct net_device

Add new argument net_device and use netdev private data member wilc
instead of g_linux_wlan. Pass argument dev to the function as well.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: GetIfHandler: add argument struct wilc and use it

This patch adds new argument struct wilc and use it instead of
g_linux_wlan. And also pass wilc to the function.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: frmw_to_linux: add argument struct wilc

This patch adds new argument struct wilc and use it instead of
g_linux_wlan. Pass argument wilc to the function as well.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wlan_rxq_remove: add argument wilc and use it

This patch adds new argument struct wilc and use it instead of g_linux_wlan.
Pass wilc to wilc_wlan_rxq_remove.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wlan_cleanup: add new argument struct net_device

This patch adds new function argument net_device and pass dev to the functions.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: mac_ioctl: use private data instead of g_linux_wlan

Use netdev private data member wilc instead of g_linux_wlan.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wlan_deinitialize_threads: change argument and use wilc

This patch changes function parameter type struct wilc with struct net_device
and use netdev private data member wilc instead of g_linux_wlan.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: WILC_WFI_mgmt_rx: add argument wilc and use it

This patch add new argument wilc and use it instead of g_wlan_linux.
Declare the function in wilc_wfi_netdevice.h.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wlan_deinit_locks: change argument wilc with net_device

This patch changes argument wilc with net_device and use netdev private data
member wilc instead of g_linux_wlan.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: host_int_init: add argument net_device

This patch add argument net_device and pass netdev private data member wilc
to kthread_run. Pass net_device to the function as well.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wlan_txq_filter_dup_tcp_ack: add argument and use wilc

This patch add argument net_device dev and use netdev private data member wilc
instead of g_linux_wlan. Pass argument dev to the function.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wlan_handle_txq: add argument and use wilc

This patch adds argument net_device dev and use netdev private data memeber
wilc instead of g_linux_wlan.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: linux_wlan_txq_task: use wilc instead of g_linux_wlan

Pass argument dev instead of wilc from kthread_run and use netdev private data
member wilc instead of g_linux_wlan.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wlan_initialize_threads: change argument with net_device

This patch changes function argument with net_device and use netdev private
data member wilc instead of g_linux_wlan. And there are assignment code with
different value continuously. Take last code.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: linux_wlan_set_bssid: use wilc instead of g_linux_wlan

This patch uses netdev private data memeber wilc instead of g_linux_wlan.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: linux_wlan_mac_indicate: add argument and use wilc

This patch adds argument wilc and pass the function wilc. Use wilc instead of
g_linux_wlan and pd.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wlan_handle_rxq: add new argument and use wilc

This patch adds new argument struct wilc and use it instead of g_linux_wlan.
Pass wilc to the function as well.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wlan_handle_isr_ext: add argument struct wilc

This patch adds argument struct wilc and pass wilc to the function.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_handle_isr: add argument wilc to wilc_handle_isr

This patch add new argument wilc to wilc_handle_isr and pass wilc to
the function.
It is void type for now because wilc_wlan.c was implemented platform
independently at the beginning (linux_wlan.c is implementation of LINUX part),
so the header file which defines struct wilc cannot be included at this moment,
but this driver is dedicated to LINUX so wilc_wlan.c and linux_wlan.c will be
merged. After that, this void type will be changed with struct wilc as well as
other functions which are using void type in wilc_wlan.h.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: deinit_irq: use wilc instead of g_linux_wlan

This patch changes function parameter linux_wlan_t nic with net_dev dev and
use netdev private data member wilc instead of nic and g_linux_wlan.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: isr_bh_routine: use wilc instead of g_linux_wlan

Use netdev private data member wilc instead of g_linux_wlan.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wicl1000: isr_uh_routine: use netdev private wilc

Use netdev private member wilc instead of g_linux_wlan and change argument wilc
with dev in the function request_threaded_irq to pass back to handler
the function isr_uh_routine.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix build error on SPI

wilc_netdev_init function has parameters to pass but no argument is passed
when bus type SPI is selected. Which causes build error.
This patch passes argument &wilc to the function wilc_netdev_init.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Fixes: 12ba5416dc77 ("staging: wilc1000: assign pointer of g_linux_wlan to sdio device data")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: cleanup over 80 characters in libcfs_hash.h

Fix up all the over 80 character line issues in libcfs_hash.h
reported by checkpatch.pl. At the same time update this header
to match what is in the OpenSFS lustre branch.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: convert last typedef data types in hash.c

Change the last typedef data types cfs_hash_lookup_intent_t
to enum and cfs_hash_cond_arg_t to a structure.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: change cfs_hash_head*_t to struct

Change cfs_hash_head_t and cfs_head_head_dep_t
from typedef to true structures.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: change cfs_hash_dhead*_t to struct

Change cfs_hash_dhead_t and cfs_head_dhead_dep_to
from typedef to true structures.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: change cfs_hash_ops_t to struct

Change cfs_hash_ops_t to struct cfs_hash_ops.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: change cfs_hash_hlist_ops_t to struct

Change cfs_hash_hlist_ops_t to struct cfs_hash_hlist_ops.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: change cfs_hash_lock_ops_t to struct

Change cfs_hash_lock_ops_t to struct cfs_hash_lock_ops.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Remove unused lustre_lfsck_user.h file

Remove the header file lustre_lfsck_user.h since it is not needed

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: rtl871x_io: Remove unused function

Drop function that is declared but not called anywhere.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: core: Remove unnecessary functions

Drop functions that are declared but are not being used anywhere.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: Remove unused p80211meta.h file

Remove the header file p80211meta.h since it is not needed

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: adc: Fix sparse warning

Fix following sparse endianness problems:

  CHECK   drivers/staging/iio/adc/ad7816.c
drivers/staging/iio/adc/ad7816.c:91:17: warning: cast to restricted
__be16
drivers/staging/iio/adc/ad7816.c:91:17: warning: cast to restricted
__be16
drivers/staging/iio/adc/ad7816.c:91:17: warning: cast to restricted
__be16
drivers/staging/iio/adc/ad7816.c:91:17: warning: cast to restricted
__be16

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: impedance-analyzer: Fix sparse warning

Fix following sparse endian warning:

drivers/staging/iio/impedance-analyzer/ad5933.c:671:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:671:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:671:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:671:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:672:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:672:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:672:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:672:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:674:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:674:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:674:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:674:34: warning: cast to restricted __be16

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: panel: Logical continuations should be on the previous line

This patch fixes the checkpatch issue:

CHECK: Logical continuations should be on the previous line

Signed-off-by: Sirnam Swetha <theonly.ultimate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: panel: usleep_range is preferred over udelay

This patch fixes the issue:

CHECK: usleep_range is preferred over udelay; see
Documentation/timers/timers-howto.txt

Signed-off-by: Sirnam Swetha <theonly.ultimate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: panel: Removing multiple blank lines

This patch fixes the checkpatch issue

CHECK: Please don't use multiple blank lines

Signed-off-by: Sirnam Swetha <theonly.ultimate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: panel: spaces preferred around that '/'

This patch fixes the checkpatch issue:

CHECK: spaces preferred around that '/'

Signed-off-by: Sirnam Swetha <theonly.ultimate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Update driver version string to 0.9-294

Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: add additional rc traces

Add additional rc traces to aid in debugging rc retry logic.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Add unit # to verbs txreq cache name

The name used to create the verbs txreq cache was not qualified with the unit
number. This causes a panic when destroying the cache on a dual HFI systems.
Create a unique name with the unit number with this patch

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Load SBus firmware once per ASIC

Using fw_sbus_load to control SBus firmware load doesn't scale across multiple
HFI1 cards in a single system. This patch ensures that the SBus firmware is
loaded once per ASIC.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Thread the receive interrupt.

When under heavy load, the receive interrupt handler can run too long with IRQs
disabled.  Add a mixed-mode threading scheme.  Initially process packets in the
handler for quick responses (latency).  If there are too many packets to
process move to a thread to continue (bandwidth).

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>