Daniel Vetter [Wed, 30 Mar 2016 09:51:21 +0000 (11:51 +0200)]
drm/msm: Nuke dummy gamma_set/get functions
Again the fbdev emulation gamma_set/get functions are only needed for
drivers that try to also use 8bpp paletted mode. Which msm doesn't, so
this is dead code. Let's rip it out.
Daniel Vetter [Wed, 30 Mar 2016 09:51:17 +0000 (11:51 +0200)]
drm/fb-helper: Remove dead code in setcolreg
DRM fbdev emulation only supports pallete_color with depth == 8, and
truecolor with depth > 8. Handling depth == 16 for palettes is hence
dead code, let's remove it.
Lukas Wunner [Tue, 31 May 2016 09:13:27 +0000 (11:13 +0200)]
vga_switcheroo: Support deferred probing of audio clients
Daniel Vetter pointed out that vga_switcheroo_client_probe_defer() could
be needed by audio clients as well. To avoid mistakes when someone adds
conditions for these in the future, constrain the single existing
condition to VGA clients by checking for PCI_BASE_CLASS_DISPLAY. This
encompasses both PCI_CLASS_DISPLAY_VGA as well as PCI_CLASS_DISPLAY_3D,
which is used by some Nvidia Optimus GPUs.
Any future checks for audio clients should then be constrained to
PCI_BASE_CLASS_MULTIMEDIA.
v6: Spun out from commit introducing vga_switcheroo_client_probe_defer()
to keep it a pure refactoring change. (Emil Velikov, Jani Nikula)
Lukas Wunner [Tue, 31 May 2016 09:13:27 +0000 (11:13 +0200)]
vga_switcheroo: Add helper for deferred probing
So far we've got one condition when DRM drivers need to defer probing
on a dual GPU system and it's coded separately into each of the relevant
drivers. As suggested by Daniel Vetter, deduplicate that code in the
drivers and move it to a new vga_switcheroo helper. This yields better
encapsulation of concepts and lets us add further checks in a central
place. (The existing check pertains to pre-retina MacBook Pros and an
additional check is expected to be needed for retinas.)
One might be tempted to check deferred probing conditions in
vga_switcheroo_register_client(), but this is usually called fairly late
during driver load. The GPU is fully brought up and ready for switching
at that point. On boot the ->probe hook is potentially called dozens of
times until it finally succeeds, and each time we'd repeat bringup and
teardown of the GPU, lengthening boot time considerably and cluttering
logfiles. A separate helper is therefore needed which can be called
right at the beginning of the ->probe hook.
Note that amdgpu currently does not call this helper as the AMD GPUs
built into MacBook Pros are only supported by radeon so far.
v2: This helper could eventually be used by audio clients as well,
so rephrase kerneldoc to refer to "client" instead of "GPU"
and move the single existing check in an if block specific
to PCI_CLASS_DISPLAY_VGA devices. Move documentation on
that check from kerneldoc to a comment. (Daniel Vetter)
v3: Mandate in kerneldoc that registration of client shall only
happen after calling this helper. (Daniel Vetter)
v4: Rebase on 412c8f7de011 ("drm/radeon: Return -EPROBE_DEFER when
amdkfd not loaded")
v5: Some Optimus GPUs use PCI_CLASS_DISPLAY_3D, make sure those are
matched as well. (Emil Velikov)
v6: The if-condition referring to PCI_BASE_CLASS_DISPLAY may be
considered a functional change. Move to a separate commit to
keep this a pure refactoring change. (Emil Velikov, Jani Nikula)
Liu Ying [Fri, 27 May 2016 09:35:54 +0000 (17:35 +0800)]
drm/atomic-helper: Do not call ->mode_fixup for CRTC which will be disabled
When a CRTC is going to be disabled, it's state may contain a display mode
with zeroed content. This could be reproduced by HDMI cable hotplug out
operation with legacy fbdev support in dual display cases. It would confuse
driver's CRTC callback ->mode_fixup and make the total state be rejected.
So, let's don't call the callback for the CRTC.
Matthew Auld [Tue, 10 May 2016 14:21:28 +0000 (15:21 +0100)]
drm: use seqlock for vblank time/count
This patch aims to replace the roll-your-own seqlock implementation with
full-blown seqlock'. We also remove the timestamp ring-buffer in favour
of single timestamp/count pair protected by a seqlock. In turn this
means we can now increment the vblank freely without the need for
clamping.
v2:
- reduce the scope of the seqlock, keeping vblank_time_lock
- make the seqlock per vblank_crtc, so multiple readers aren't blocked by
the writer
Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462890088-18194-1-git-send-email-matthew.auld@intel.com
Dave Airlie [Sun, 1 May 2016 22:35:05 +0000 (08:35 +1000)]
drm/edid: add displayid detailed 1 timings to the modelist. (v1.1)
The tiled 5K Dell monitor appears to be hiding it's tiled mode
inside the displayid timings block, this patch parses this
blocks and adds the modes to the modelist.
v1.1: add missing __packed.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95207 Signed-off-by: Dave Airlie <airlied@redhat.com>
drm: Rework vblank-wait handling to allow interrupt reduction.
to stay backwards-compatible with old UMS code that didn't even tell
the kernel when it did a modeset, so that the kernel could
save/restore vblank counters. At worst this means vblanks will be
somewhat funky on a setup that very likely no one still runs.
So let's just nuke it.
Plan B would be to set it unconditionally in drm_vblank_init for kms
drivers, instead of in each driver separately. So if this patch breaks
anything please only restore the hunks in drmP.h and drm_irq.c, plus
add a check for DRIVER_MODESET in drm_vblank_init.
Stumbled over this in a discussion on irc with Chris.
Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 20 May 2016 20:41:59 +0000 (06:41 +1000)]
Merge tag 'vmwgfx-next-160520' of git://people.freedesktop.org/~thomash/linux into drm-next
Pull request of 2016-05-20
* tag 'vmwgfx-next-160520' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Report vmwgfx version to vmware.log
drm/vmwgfx: Add VMWare host messaging capability
drm/vmwgfx: Kill some lockdep warnings
Dave Airlie [Fri, 20 May 2016 20:12:13 +0000 (06:12 +1000)]
Merge branch 'linux-4.7' of git://github.com/skeggsb/linux into drm-next
Nothing too exciting here, there's a larger chunk of work that still
needs more testing but not likely to get that done today - so - here's
the rest of it. Assuming nothing else goes horribly wrong, I should be
able to send the rest Monday if it isn't too late....
Changes:
- Improvements to power sensor support
- Initial attempt at GM108 support
- Minor fixes to GR init + ucode
- Make use of topology information (provided by the GPU) in various
places, should at least fix some fault recovery issues and
engine/runlist mapping confusion on newer GPUs.
* 'linux-4.7' of git://github.com/skeggsb/linux: (51 commits)
drm/nouveau/gr/gf100-: fix race condition in fecs/gpccs ucode
drm/nouveau/core: recognise GM108 chipsets
drm/nouveau/gr/gm107-: fix touching non-existent ppcs in attrib cb setup
drm/nouveau/gr/gk104-: share implementation of ppc exception init
drm/nouveau/gr/gk104-: move rop_active_fbps init to nonctx
drm/nouveau/bios/pll: check BIT table version before trying to parse it
drm/nouveau/bios/pll: prevent oops when limits table can't be parsed
drm/nouveau/volt/gk104: round up in gk104_volt_set
drm/nouveau/fb/gm200: setup mmu debug buffer registers at init()
drm/nouveau/fb/gk20a,gm20b: setup mmu debug buffer registers at init()
drm/nouveau/fb/gf100-: allocate mmu debug buffers
drm/nouveau/fb: allow chipset-specific actions for oneinit()
drm/nouveau/gr/gm200-: fix bad hardcoding of a max-tpcs-per-gpc value
drm/nouveau/gr/gm200-: rop count == ltc count
drm/nouveau/gr/gm200: modify the mask when copying mmu settings from fb
drm/nouveau/gr/gm200: move some code into init_gpc_mmu() hook
drm/nouveau/gr/gm200: make generate_main() static
drm/nouveau/gr/gf100-: abstract fetching rop count
drm/nouveau/gr/gf100-: rename magic_not_rop_nr to screen_tile_row_offset
drm/nouveau/gr/gf100-: remove hardcoded idle_timeout values
...
When tracking down a customer issue, it is useful to know exactly
which version of the vmwgfx they are using. Since vmware.log is
often the only available debug log, report vmwgfx version in there.
Signed-off-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
This patch adds capabilities for a VMWare guest to send and
receive messages from the host, and adds functions to sending log
messages to vmware.log and to request device settings that aren't
available through the virtual hardware, e.g. certain settings in
the VMX file.
Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Some global KMS state that is elsewhere protected by the mode_config
mutex here needs to be protected with a local mutex. Remove corresponding
lockdep checks and introduce a new driver-private global_kms_state_mutex,
and make sure its locking order is *after* the crtc locks in order to
avoid having to release those when the new mutex is taken.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Cc: <stable@vger.kernel.org> # 4.6
Ben Skeggs [Thu, 19 May 2016 23:04:41 +0000 (09:04 +1000)]
drm/nouveau/gr/gf100-: fix race condition in fecs/gpccs ucode
This is a simplied version of the fix by Roy in fdo#93629. While this
doesn't appear to fix the issues for the users in that report, it's a
real issue that deserves to be resolved.
Reported-by: Roy Spliet <rspliet@eclipso.eu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 21 Apr 2016 00:28:55 +0000 (10:28 +1000)]
drm/nouveau/gr/gm107-: fix touching non-existent ppcs in attrib cb setup
Also removes an XXX; according to nvgpu headers the field is called
NV_PGRAPH_GPCS_SWDX_TC_BETA_CB_SIZE_DIV3, so, apparently not some
magic we need to figure out :)
Karol Herbst [Mon, 11 Jan 2016 01:58:03 +0000 (02:58 +0100)]
drm/nouveau/pmu: be more strict about locking
When we start communicating with the pmu a bit more, the current code is
a real issue. I encountered a dead lock here, while testing my dynamic
reclocking code
Signed-off-by: Karol Herbst <nouveau@karolherbst.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
drm/nouveau/devinit/gf100: make devinit on resume safer
In case of successful suspend, devinit will have to be run and this is
the behavior currently hardcoded. However, as FD bug 94725 suggests,
there might be cases where runtime suspend leaves the GPU powered, and
in such cases devinit should not be run on resume.
On GF100+ we have a reliable way to know whether we need to run devinit.
Use it instead of blindly trusting the flag set by nvkm_devinit_fini().
The code around the NvForcePost also needs to be slightly reworked in
order to keep working.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Suggested-by: Dave Airlie <airlied@redhat.com> Suggested-by: Karol Herbst <nouveau@karolherbst.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dave Airlie [Wed, 18 May 2016 20:48:29 +0000 (06:48 +1000)]
Merge tag 'topic/drm-misc-2016-05-18' of git://anongit.freedesktop.org/drm-intel into drm-next
Update drm-misc pull with a few more fixes included, plus the two from
Arnd for the fallout from the drm_gem_object_lookup() refactor that I
failed to spot :(
* tag 'topic/drm-misc-2016-05-18' of git://anongit.freedesktop.org/drm-intel:
drm: remove unused dev variables
drm: mediatek: fixup drm_gem_object_lookup API change
drm/tegra: Fix crash caused by reference count imbalance
drm: Fix error handling in drm_connector_register
drm: Avoid connector reference imbalance on error path
drm/fb_helper: Fix references to dev->mode_config.num_connector
drm/i915/fbdev: Fix num_connector references in intel_fb_initial_config()
qxl: catch qxlfb_create_pinned_object failures
drm/exynos/hdmi: add a missing tab
drm/fb-cma-helper: Add function drm_fb_cma_create_with_funcs()
drm/fb-cma-helper: Use const for drm_framebuffer_funcs argument
drm: Drop connector argument from __drm_atomic_helper_connector_destroy_state
drm: Drop plane argument from __drm_atomic_helper_plane_destroy_state
drm: Drop crtc argument from __drm_atomic_helper_crtc_destroy_state
drm: Remove unused drm_device from drm_gem_object_lookup()
Arnd Bergmann [Wed, 18 May 2016 16:07:33 +0000 (18:07 +0200)]
drm: remove unused dev variables
After drm_gem_object_lookup() was changed along with all its callers,
we have several drivers that have unused variables:
drm/armada/armada_crtc.c: In function 'armada_drm_crtc_cursor_set':
drm/armada/armada_crtc.c:900:21: error: unused variable 'dev' [-Werror=unused-variable]
drm/nouveau/nouveau_gem.c: In function 'validate_init':
drm/nouveau/nouveau_gem.c:371:21: error: unused variable 'dev' [-Werror=unused-variable]
drm/nouveau/nv50_display.c: In function 'nv50_crtc_cursor_set':
drm/nouveau/nv50_display.c:1308:21: error: unused variable 'dev' [-Werror=unused-variable]
drm/radeon/radeon_cs.c: In function 'radeon_cs_parser_relocs':
drm/radeon/radeon_cs.c:77:21: error: unused variable 'ddev' [-Werror=unused-variable]
This fixes all the instances I found with ARM randconfig builds so far.
Arnd Bergmann [Wed, 18 May 2016 16:07:31 +0000 (18:07 +0200)]
drm: mediatek: fixup drm_gem_object_lookup API change
The drm_gem_object_lookup() function prototype changed while this
driver was added, so it fails to build now:
drivers/gpu/drm/mediatek/mtk_drm_gem.c: In function 'mtk_drm_gem_dumb_map_offset':
drivers/gpu/drm/mediatek/mtk_drm_gem.c:142:30: error: passing argument 1 of 'drm_gem_object_lookup' from incompatible pointer type [-Werror=incompatible-pointer-types]
obj = drm_gem_object_lookup(dev, file_priv, handle);
Jon Hunter [Wed, 18 May 2016 15:37:36 +0000 (16:37 +0100)]
drm/tegra: Fix crash caused by reference count imbalance
Commit d2307dea14a4 ("drm/atomic: use connector references (v3)") added
reference counting for DRM connectors and this caused a crash when
exercising system suspend on Tegra114 Dalmore.
The Tegra DSI driver implements a Tegra specific function,
tegra_dsi_connector_duplicate_state(), to duplicate the connector state
and destroys the state using the generic helper function,
drm_atomic_helper_connector_destroy_state(). Following commit d2307dea14a4 ("drm/atomic: use connector references (v3)") there is
now an imbalance in the connector reference count because the Tegra
function to duplicate state does not take a reference when duplicating
the state information. However, the generic helper function to destroy
the state information assumes a reference has been taken and during
system suspend, when the connector state is destroyed, this leads to a
crash because we attempt to put the reference for an object that has
already been freed.
Fix this by calling __drm_atomic_helper_connector_duplicate_state() from
tegra_dsi_connector_duplicate_state() to ensure that we take a reference
on a connector if crtc is set. Note that this will also copy the
connector state a 2nd time, but this should be harmless.
By fixing tegra_dsi_connector_duplicate_state() to take a reference,
although a crash was no longer seen, it was then observed that after
each system suspend-resume cycle, the reference would be one greater
than before the suspend-resume cycle. Following commit d2307dea14a4
("drm/atomic: use connector references (v3)"), it was found that we
also need to put the reference when calling the function
tegra_dsi_connector_reset() before freeing the state. Fix this by
updating tegra_dsi_connector_reset() to call the function
__drm_atomic_helper_connector_destroy_state() in order to put the
reference for the connector.
Chris Wilson [Fri, 6 May 2016 11:47:45 +0000 (12:47 +0100)]
drm: Avoid connector reference imbalance on error path
Whilst looking at the fallout from using connector references for
atomic, I noticed that there is an early return buried in
drm_atomic_set_crtc_for_connector() that if hit could cause us to leak a
reference on the connector.
Lyude [Thu, 12 May 2016 14:56:59 +0000 (10:56 -0400)]
drm/fb_helper: Fix references to dev->mode_config.num_connector
During boot, MST hotplugs are generally expected (even if no physical
hotplugging occurs) and result in DRM's connector topology changing.
This means that using num_connector from the current mode configuration
can lead to the number of connectors changing under us. This can lead to
some nasty scenarios in fbcon:
- We allocate an array to the size of dev->mode_config.num_connectors.
- MST hotplug occurs, dev->mode_config.num_connectors gets incremented.
- We try to loop through each element in the array using the new value
of dev->mode_config.num_connectors, and end up going out of bounds
since dev->mode_config.num_connectors is now larger then the array we
allocated.
fb_helper->connector_count however, will always remain consistent while
we do a modeset in fb_helper.
Note: This is just polish for 4.7, Dave Airlie's drm_connector
refcounting fixed these bugs for real. But it's good enough duct-tape
for stable kernel backporting, since backporting the refcounting
changes is way too invasive.
Lyude [Thu, 12 May 2016 14:56:58 +0000 (10:56 -0400)]
drm/i915/fbdev: Fix num_connector references in intel_fb_initial_config()
During boot time, MST devices usually send a ton of hotplug events
irregardless of whether or not any physical hotplugs actually occurred.
Hotplugs mean connectors being created/destroyed, and the number of DRM
connectors changing under us. This isn't a problem if we use
fb_helper->connector_count since we only set it once in the code,
however if we use num_connector from struct drm_mode_config we risk it's
value changing under us. On top of that, there's even a chance that
dev->mode_config.num_connector != fb_helper->connector_count. If the
number of connectors happens to increase under us, we'll end up using
the wrong array size for memcpy and start writing beyond the actual
length of the array, occasionally resulting in kernel panics.
Note: This is just polish for 4.7, Dave Airlie's drm_connector
refcounting fixed these bugs for real. But it's good enough duct-tape
for stable kernel backporting, since backporting the refcounting
changes is way too invasive.
Noralf Trønnes [Thu, 12 May 2016 18:25:21 +0000 (20:25 +0200)]
drm/fb-cma-helper: Use const for drm_framebuffer_funcs argument
drm_framebuffer_init() uses const for the drm_framebuffer_funcs
argument so use that on drm_fb_cma_alloc() and
drm_fbdev_cma_create_with_funcs() as well.
Daniel Vetter [Mon, 9 May 2016 14:34:11 +0000 (16:34 +0200)]
drm: Drop connector argument from __drm_atomic_helper_connector_destroy_state
It's unused, and really this helper should only look at the state
structure and nothing else. Note that this conflicts with a patch from
Dave that adds refcounting to drm_connectors. It's not yet clear
whether the check Dave adds for connector != NULL is really needed or
the right check.
v2: Fix commmit message (Laurent).
Cc: Dave Airlie <airlied@gmail.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462804451-15318-3-git-send-email-daniel.vetter@ffwll.ch
Chris Wilson [Mon, 9 May 2016 10:04:54 +0000 (11:04 +0100)]
drm: Remove unused drm_device from drm_gem_object_lookup()
drm_gem_object_lookup() has never required the drm_device for its file
local translation of the user handle to the GEM object. Let's remove the
unused parameter and save some space.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Fixup kerneldoc too.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Tue, 17 May 2016 06:34:43 +0000 (16:34 +1000)]
Merge branch 'drm-uapi-extern-c-fixes' of https://github.com/evelikov/linux into drm-next
Not the biggest fan of doing it this way, but what the hell.
* 'drm-uapi-extern-c-fixes' of https://github.com/evelikov/linux: (22 commits)
drm/vmwgfx: add extern C guard for the UAPI header
drm/virgl: add extern C guard for the UAPI header
drm/via: add extern C guard for the UAPI header
drm/vc4: add extern C guard for the UAPI header
drm/tegra: add extern C guard for the UAPI header
drm/sis: add extern C guard for the UAPI header
drm/savage: add extern C guard for the UAPI header
drm/radeon: add extern C guard for the UAPI header
drm/r128: add extern C guard for the UAPI header
drm/qxl: add extern C guard for the UAPI header
drm/omap: add extern C guard for the UAPI header
drm/nouveau: drop drm/ prefix from include
drm/nouveau: add extern C guard for the UAPI header
drm/msm: add extern C guard for the UAPI header
drm/mga: add extern C guard for the UAPI header
drm/i915: add extern C guard for the UAPI header
drm/i810: add extern C guard for the UAPI header
drm/exynos: add extern C guard for the UAPI header
drm/etnaviv: add extern C guard for the UAPI header
drm: add extern C guard for the UAPI headers
...
Dave Airlie [Mon, 16 May 2016 21:06:14 +0000 (07:06 +1000)]
Merge tag 'topic/drm-misc-2016-05-13' of git://anongit.freedesktop.org/drm-intel into drm-next
I kinda hoped that I could still sneak in Noralf's
drm_simple_display_pipe, since there's intereset by others now (for tilcdc
at least). But it wasn't ready by a hair. Oh well.
Otherwise random stuff plus prep patches from Noralf.
* tag 'topic/drm-misc-2016-05-13' of git://anongit.freedesktop.org/drm-intel:
drm/atomic: Add drm_atomic_helper_best_encoder()
drm/atomic: Don't skip drm_bridge_*() calls if !drm_encoder_helper_funcs
drm/fb-cma-helper: Hook up to DocBook and fix some docs
drm/fb-helper: Remove mention of CONFIG_FB_DEFERRED_IO in docs
drm/sti: include linux/seq_file.h where needed
drm/tegra: Use lockless gem BO free callback
drm/exynos: Use lockless gem BO free callback
drm: Make drm_encoder_helper_funcs optional
Dave Airlie [Mon, 16 May 2016 20:36:08 +0000 (06:36 +1000)]
Merge branch 'topic-arcpgu-updates' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux into drm-next
Please pull this mini-series that allows ARC PGU to use
dedicated memory location as framebuffer backing storage.
* 'topic-arcpgu-updates' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux:
ARC: [axs10x] Specify reserved memory for frame buffer
drm/arcpgu: use dedicated memory area for frame buffer
Emil Velikov [Thu, 7 Apr 2016 18:40:10 +0000 (19:40 +0100)]
drm/vmwgfx: add extern C guard for the UAPI header
Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Brian Paul <brianp@vmware.com> Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Acked-by: Sinclair Yeh <syeh@vmware.com>
projects / linux-beck.git / log