]> git.karo-electronics.de Git - karo-tx-linux.git/log
karo-tx-linux.git
10 years ago./Makefile: export initial ramdisk compression config option
P J P [Tue, 12 Nov 2013 23:11:44 +0000 (15:11 -0800)]
./Makefile: export initial ramdisk compression config option

Make menuconfig allows one to choose compression format of an initial
ramdisk image.  But this choice does not result in duly compressed ramdisk
image.  Because - $ make install - does not pass on the selected
compression choice to the dracut(8) tool, which creates the initramfs
file.  dracut(8) generates the image with the default compression, ie.
gzip(1).

This patch exports the selected compression option to a sub-shell
environment, so that it could be used by dracut(8) tool to generate
appropriately compressed initramfs images.

There isn't a straightforward way to pass on options to dracut(8) via
positional parameters.  Because it is indirectly invoked at the end of a $
make install sequence.

 # make install
   -> arch/$arch/boot/Makefile
    -> arch/$arch/boot/install.sh
     -> /sbing/installkernel ...
      -> /sbin/new-kernel-pkg ...
       -> /sbin/dracut ...

Signed-off-by: P J P <ppandit@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoinit/Kconfig: add option to disable kernel compression
Christian Ruppert [Tue, 12 Nov 2013 23:11:43 +0000 (15:11 -0800)]
init/Kconfig: add option to disable kernel compression

Some ARC users say they can boot faster with without kernel compression.
This probably depends on things like the FLASH chip they use etc.

Until now, kernel compression can only be disabled by removing "select
HAVE_<compression>" lines from the architecture Kconfig.  So add the
Kconfig logic to permit disabling of kernel compression.

Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers: w1: make w1_slave::flags long to avoid memory corruption
Michal Nazarewicz [Tue, 12 Nov 2013 23:11:42 +0000 (15:11 -0800)]
drivers: w1: make w1_slave::flags long to avoid memory corruption

On architectures where long is more then 32 bits, modifying a 32-bit field
with set_bit (and other atomic bit operations) may cause bytes following
the field to by modified.

Because the endianness of the bits within a field is the native endianness
of the CPU[1], on big-endian machines, bit number zero is in the last byte
of the field.

Therefore, `set_bit(0, ptr)' on a 64-bit big-endian machine is roughly
equivalent to `((char *)ptr)[7] |= 1', and since w1 driver uses a 32-bit
field for holding the flags, this causes bytes beyond the field to be
modified.

[1] From Documentation/atomic_ops.txt:

    Native atomic bit operations are defined to operate on objects
    aligned to the size of an "unsigned long" C data type, and are
    least of that size.  The endianness of the bits within each
    "unsigned long" are the native endianness of the cpu.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/w1/masters/ds1wm.cuse dev_get_platdata()
Jingoo Han [Tue, 12 Nov 2013 23:11:41 +0000 (15:11 -0800)]
drivers/w1/masters/ds1wm.cuse dev_get_platdata()

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to make
the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/memstick/core/ms_block.c: fix unreachable state in h_msb_read_page()
Roger Tseng [Tue, 12 Nov 2013 23:11:40 +0000 (15:11 -0800)]
drivers/memstick/core/ms_block.c: fix unreachable state in h_msb_read_page()

In h_msb_read_page() in ms_block.c, flow never reaches case
MSB_RP_RECIVE_STATUS_REG.  This causes error when MEMSTICK_INT_ERR is
encountered and status error bits are going to be examined, but the status
will never be copied back.

Fix it by transitioning to MSB_RP_RECIVE_STATUS_REG right after
MSB_RP_SEND_READ_STATUS_REG.

Signed-off-by: Roger Tseng <rogerable@realtek.com>
Acked-by: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/memstick/core/mspro_block.c: fix attributes array allocation
Michal Nazarewicz [Tue, 12 Nov 2013 23:11:39 +0000 (15:11 -0800)]
drivers/memstick/core/mspro_block.c: fix attributes array allocation

attrs field of attribute_group structure is a pointer to a pointer (as in
an array of pointers) rather than pointer to attribute struct (as in an
array of structures), so when allocating size of the pointer sholud be
used instead of the structure it is pointing to.

While at it, also change the call to use kcalloc rather than kzalloc.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/pps/clients/pps-gpio.c: remove redundant of_match_ptr
Sachin Kamat [Tue, 12 Nov 2013 23:11:33 +0000 (15:11 -0800)]
drivers/pps/clients/pps-gpio.c: remove redundant of_match_ptr

The data structure of_match_ptr() protects is always compiled in.  Hence
of_match_ptr() is not needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agokernel/panic.c: reduce 1 byte usage for print tainted buffer
Chen Gang [Tue, 12 Nov 2013 23:11:32 +0000 (15:11 -0800)]
kernel/panic.c: reduce 1 byte usage for print tainted buffer

sizeof("Tainted: ") already counts '\0', and after first sprintf(), 's'
will start from the current string end (its' value is '\0').

So need not add additional 1 byte for maximized usage of 'buf' in
print_tainted().

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agogcov: reuse kbasename helper
Andy Shevchenko [Tue, 12 Nov 2013 23:11:31 +0000 (15:11 -0800)]
gcov: reuse kbasename helper

To get name of the file from a pathname let's use kbasename() helper.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agokernel/gcov/fs.c: use pr_warn()
Andrew Morton [Tue, 12 Nov 2013 23:11:29 +0000 (15:11 -0800)]
kernel/gcov/fs.c: use pr_warn()

pr_warning() is deprecated in favor of pr_warn()

Cc: Andy Gospodarek <agospoda@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Frantisek Hrbata <fhrbata@redhat.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agokernel/module.c: use pr_foo()
Andrew Morton [Tue, 12 Nov 2013 23:11:28 +0000 (15:11 -0800)]
kernel/module.c: use pr_foo()

kernel/module.c uses a mix of printk(KERN_foo and pr_foo().  Convert it
all to pr_foo and make the offered cleanups.

Not sure what to do about the printk(KERN_DEFAULT).  We don't have a
pr_default().

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Joe Perches <joe@perches.com>
Cc: Frantisek Hrbata <fhrbata@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agogcov: compile specific gcov implementation based on gcc version
Frantisek Hrbata [Tue, 12 Nov 2013 23:11:27 +0000 (15:11 -0800)]
gcov: compile specific gcov implementation based on gcc version

Compile the correct gcov implementation file for the specific gcc version.

Signed-off-by: Frantisek Hrbata <fhrbata@redhat.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Gospodarek <agospoda@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agogcov: add support for gcc 4.7 gcov format
Frantisek Hrbata [Tue, 12 Nov 2013 23:11:26 +0000 (15:11 -0800)]
gcov: add support for gcc 4.7 gcov format

The gcov in-memory format changed in gcc 4.7.  The biggest change, which
requires this special implementation, is that gcov_info no longer contains
array of counters for each counter type for all functions and gcov_fn_info
is not used for mapping of function's counters to these arrays(offset).
Now each gcov_fn_info contans it's counters, which makes things a little
bit easier.

This is heavily based on the previous gcc_3_4.c implementation and patches
provided by Peter Oberparleiter.  Specially the buffer gcda implementation
for iterator.

[akpm@linux-foundation.org: use kmemdup() and kcalloc()]
[oberpar@linux.vnet.ibm.com: gcc_4_7.c needs vmalloc.h]
Signed-off-by: Frantisek Hrbata <fhrbata@redhat.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Gospodarek <agospoda@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agogcov: move gcov structs definitions to a gcc version specific file
Frantisek Hrbata [Tue, 12 Nov 2013 23:11:24 +0000 (15:11 -0800)]
gcov: move gcov structs definitions to a gcc version specific file

Since also the gcov structures(gcov_info, gcov_fn_info, gcov_ctr_info) can
change between gcc releases, as shown in gcc 4.7, they cannot be defined
in a common header and need to be moved to a specific gcc implemention
file.  This also requires to make the gcov_info structure opaque for the
common code and to introduce simple helpers for accessing data inside
gcov_info.

Signed-off-by: Frantisek Hrbata <fhrbata@redhat.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Gospodarek <agospoda@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agokernel/taskstats.c: return -ENOMEM when alloc memory fails in add_del_listener()
Chen Gang [Tue, 12 Nov 2013 23:11:23 +0000 (15:11 -0800)]
kernel/taskstats.c: return -ENOMEM when alloc memory fails in add_del_listener()

For registering in add_del_listener(), when kmalloc_node() fails, need
return -ENOMEM instead of success code, and cmd_attr_register_cpumask()
wants to know about it.

After modification, give a simple common test "build -> boot up ->
kernel/controllers/cgroup/getdelays by LTP tools".

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agokernel/taskstats.c: add nla_nest_cancel() for failure processing between nla_nest_sta...
Chen Gang [Tue, 12 Nov 2013 23:11:22 +0000 (15:11 -0800)]
kernel/taskstats.c: add nla_nest_cancel() for failure processing between nla_nest_start() and nla_nest_end()

When failure occurs between nla_nest_start() and nla_nest_end(), we should
call nla_nest_cancel() to clean up related things.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agokernel/sysctl_binary.c: use scnprintf() instead of snprintf()
Chen Gang [Tue, 12 Nov 2013 23:11:22 +0000 (15:11 -0800)]
kernel/sysctl_binary.c: use scnprintf() instead of snprintf()

snprintf() will return the 'ideal' length which may be larger than real
buffer length, if we only want to use real length, need use scnprintf()
instead of.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agokernel/sysctl.c: check return value after call proc_put_char() in __do_proc_doulongve...
Chen Gang [Tue, 12 Nov 2013 23:11:21 +0000 (15:11 -0800)]
kernel/sysctl.c: check return value after call proc_put_char() in __do_proc_doulongvec_minmax()

Need to check the return value of proc_put_char(), as was done in
__do_proc_doulongvec_minmax().

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agorbtree: fix rbtree_postorder_for_each_entry_safe() iterator
Jan Kara [Tue, 12 Nov 2013 23:11:19 +0000 (15:11 -0800)]
rbtree: fix rbtree_postorder_for_each_entry_safe() iterator

The iterator rbtree_postorder_for_each_entry_safe() relies on pointer
underflow behavior when testing for loop termination.  In particular it
expects that

  &rb_entry(NULL, type, field)->field

is NULL.  But the result of this expression is not defined by a C standard
and some gcc versions (e.g.  4.3.4) assume the above expression can never
be equal to NULL.  The net result is an oops because the iteration is not
properly terminated.

Fix the problem by modifying the iterator to avoid pointer underflows.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: <stable@vger.kernel.org> [3.12.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoexec/ptrace: fix get_dumpable() incorrect tests
Kees Cook [Tue, 12 Nov 2013 23:11:17 +0000 (15:11 -0800)]
exec/ptrace: fix get_dumpable() incorrect tests

The get_dumpable() return value is not boolean.  Most users of the
function actually want to be testing for non-SUID_DUMP_USER(1) rather than
SUID_DUMP_DISABLE(0).  The SUID_DUMP_ROOT(2) is also considered a
protected state.  Almost all places did this correctly, excepting the two
places fixed in this patch.

Wrong logic:
    if (dumpable == SUID_DUMP_DISABLE) { /* be protective */ }
        or
    if (dumpable == 0) { /* be protective */ }
        or
    if (!dumpable) { /* be protective */ }

Correct logic:
    if (dumpable != SUID_DUMP_USER) { /* be protective */ }
        or
    if (dumpable != 1) { /* be protective */ }

Without this patch, if the system had set the sysctl fs/suid_dumpable=2, a
user was able to ptrace attach to processes that had dropped privileges to
that user.  (This may have been partially mitigated if Yama was enabled.)

The macros have been moved into the file that declares get/set_dumpable(),
which means things like the ia64 code can see them too.

CVE-2013-2929

Reported-by: Vasily Kulikov <segoon@openwall.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agokcore: add Kconfig help text
Randy Dunlap [Tue, 12 Nov 2013 23:11:16 +0000 (15:11 -0800)]
kcore: add Kconfig help text

Under Pseudo filesystems, /proc/kcore support has no help.

Fixes a portion of kernel bugzilla #52671:
  https://bugzilla.kernel.org/show_bug.cgi?id=52671

Thanks for David Howells for the help text.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: <lailavrazda1979@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoprocfs: clean up proc_reg_get_unmapped_area for 80-column limit
HATAYAMA Daisuke [Tue, 12 Nov 2013 23:11:15 +0000 (15:11 -0800)]
procfs: clean up proc_reg_get_unmapped_area for 80-column limit

Clean up proc_reg_get_unmapped_area due to its 80-column limit
violation.

Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Tested-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoDocumentation/ABI: document the non-ABI status of Kconfig and symbols
Josh Triplett [Tue, 12 Nov 2013 23:11:14 +0000 (15:11 -0800)]
Documentation/ABI: document the non-ABI status of Kconfig and symbols

Discussion at Kernel Summit made it clear that the presence or absence of
specific Kconfig symbols are not considered ABI, and that no userspace (or
bootloader, etc) should rely on them.

In addition, kernel-internal symbols are well established as non-ABI, per
Documentation/stable_api_nonsense.txt.

Document both of these in Documentation/ABI/README, in a new section for
notable bits of non-ABI.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Cc: Rob Landley <rob@landley.net>
Cc: Tao Ma <boyu.mt@taobao.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agokernel-doc: improve "no structured comments found" error
Johannes Berg [Tue, 12 Nov 2013 23:11:12 +0000 (15:11 -0800)]
kernel-doc: improve "no structured comments found" error

When using '!Ffile function' in a docbook template, and the function no
longer exists, you get a "no structured comments found" error from the
kernel-doc processing script.  It's useful to know which functions it was
looking for, so print them out in this case.  Also do the same for '!Pfile
doc-section'

The same error also happens when using '!Efile' when some exported
functions aren't documented (in the same file.) There's a very large
number of such functions though, so don't print the message in this case
-- right now it would give ~850 messages.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Rob Landley <rob@landley.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoDocumentation/trace/tracepoints.txt: add links to TRACE_EVENT documentation
Stefan Raspl [Tue, 12 Nov 2013 23:11:11 +0000 (15:11 -0800)]
Documentation/trace/tracepoints.txt: add links to TRACE_EVENT documentation

Existing tracepoint documentation doesn't mention the popular
TRACE_EVENT macro.  Since an excellent series of articles on proper
usage already exists, respective links are added to the existing
documentation.

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Cc: Rob Landley <rob@landley.net>
Cc: Jiri Kosina <jkosina@suse.cz>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Zoltan Kiss <zoltan.kiss@citrix.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoDocumentation/filesystems/vfat.txt: fix directory entry example
Luis Ortega Perez de Villar [Tue, 12 Nov 2013 23:11:10 +0000 (15:11 -0800)]
Documentation/filesystems/vfat.txt: fix directory entry example

Slots can store up to 13 characters for the file name but one of the
examples has one character too many.

Signed-off-by: Luis Ortega Perez de Villar <luiorpe1@upv.es>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agohfsplus: implement attributes file creation functionality
Vyacheslav Dubeyko [Tue, 12 Nov 2013 23:11:09 +0000 (15:11 -0800)]
hfsplus: implement attributes file creation functionality

Implement functionality of creation AttributesFile metadata file on HFS+
volume in the case of absence of it.

It makes trying to open AttributesFile's B-tree during mount of HFS+
volume.  If HFS+ volume hasn't AttributesFile then a pointer on
AttributesFile's B-tree keeps as NULL.  Thereby, when it is discovered
absence of AttributesFile on HFS+ volume in the begin of xattr creation
operation then AttributesFile will be created.

The creation of AttributesFile will have success in the case of
availability (2 * clump) free blocks on HFS+ volume.  Otherwise,
creation operation is ended with error (-ENOSPC).

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agohfsplus: implement attributes file's header node initialization code
Vyacheslav Dubeyko [Tue, 12 Nov 2013 23:11:08 +0000 (15:11 -0800)]
hfsplus: implement attributes file's header node initialization code

Implement functionality of AttributesFile's header node initialization.

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agohfsplus: add metadata file's clump size calculation functionality
Vyacheslav Dubeyko [Tue, 12 Nov 2013 23:11:07 +0000 (15:11 -0800)]
hfsplus: add metadata file's clump size calculation functionality

There are situation when HFS+ volume had been created without
AttributesFile.  Such situation can take place because of using old
mkfs.hfs utility or creation HFS+ volume without taking in mind
necessity to use xattrs.  For example, Mac OS X 10.4 (Tiger) doesn't
create AttributesFile during mkfs phase.  Also it is a very frequent
situation for the case of users that created HFS+ volumes under Linux.
As a result, xattrs and POSIX ACLs on HFS+ volume are unavailable for
such users.

This patchset implements functionality of AttributesFile creation on
HFS+ volume in the case of this metadata file absence during operation
of xattr creation.

This patch:

Add functionality of metadata file's clump size calculation.  Operation
of AttributesFile creation needs in clump size setting.  This value will
be used when AttributesFile will be extended.

This code is adopted from code of newfs_hfs utility of diskdev_cmds packet
http://opensource.apple.com/tarballs/diskdev_cmds/.

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agofs/hfs/btree.h: remove duplicate defines
Michael Opdenacker [Tue, 12 Nov 2013 23:11:06 +0000 (15:11 -0800)]
fs/hfs/btree.h: remove duplicate defines

This patch removes duplicate defines from fs/hfs/btree.h

[akpm@linux-foundation.org: retain the comments]
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-as3722: add RTC driver
Laxman Dewangan [Tue, 12 Nov 2013 23:11:05 +0000 (15:11 -0800)]
drivers/rtc/rtc-as3722: add RTC driver

The ams AS3722 is a compact system PMU suitable for mobile phones, tablets
etc.

Add a driver to support accessing the RTC found on the ams AS3722 PMIC
using RTC framework.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Florian Lobmaier <florian.lobmaier@ams.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agortc: s5m-rtc: add real-time clock driver for s5m8767
Sangbeom Kim [Tue, 12 Nov 2013 23:11:04 +0000 (15:11 -0800)]
rtc: s5m-rtc: add real-time clock driver for s5m8767

Add real-time clock driver for s5m8767.

Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Todd Broch <tbroch@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org> [mfd parts]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-tps65910.c: remove unnecessary include
Manish Badarkhe [Tue, 12 Nov 2013 23:11:03 +0000 (15:11 -0800)]
drivers/rtc/rtc-tps65910.c: remove unnecessary include

Currently, driver includes 'pm_runtime.h' which is not used anywhere in
code hence remove this unnecessory inclusion.

Signed-off-by: Manish Badarkhe <badarkhe.manish@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-pl030.c: use devm_kzalloc() instead of kmalloc()
Sangjung Woo [Tue, 12 Nov 2013 23:11:02 +0000 (15:11 -0800)]
drivers/rtc/rtc-pl030.c: use devm_kzalloc() instead of kmalloc()

In order to be free automatically and make the cleanup paths more simple,
use devm_kzalloc() instead of kmalloc().

Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com>
Cc: Joe Perches <joe@perches.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-puv3.c: use dev_dbg() instead of pr_debug()
Sangjung Woo [Tue, 12 Nov 2013 23:11:00 +0000 (15:11 -0800)]
drivers/rtc/rtc-puv3.c: use dev_dbg() instead of pr_debug()

Because dev_*() are used along with pr_debug() function in this code, the
debug message is not tidy.  This patch converts from pr_debug() to
dev_dbg() since dev_*() are encouraged to use in device driver code.

Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-pl03x.c: remove unnecessary amba_set_drvdata()
Michal Simek [Tue, 12 Nov 2013 23:11:00 +0000 (15:11 -0800)]
drivers/rtc/rtc-pl03x.c: remove unnecessary amba_set_drvdata()

Driver core clears the driver data to NULL after device_release or on
probe failure, so just remove it from here.

The relevant driver core change was commit 0998d0631001 ("device-core:
Ensure drvdata = NULL when no driver is bound").

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-ds1307.c: change variable type to bool
Peter Senna Tschudin [Tue, 12 Nov 2013 23:10:59 +0000 (15:10 -0800)]
drivers/rtc/rtc-ds1307.c: change variable type to bool

The variable want_irq is only assigned the values true and false.
Change its type to bool.

The simplified semantic patch that find this problem is as
follows (http://coccinelle.lip6.fr/):

@exists@
type T;
identifier b;
@@
- T
+ bool
  b = ...;
  ... when any
  b = \(true\|false\)

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-stmp3xxx.c: remove redundant of_match_ptr
Sachin Kamat [Tue, 12 Nov 2013 23:10:58 +0000 (15:10 -0800)]
drivers/rtc/rtc-stmp3xxx.c: remove redundant of_match_ptr

The data structure of_match_ptr() protects is always compiled in.
Hence of_match_ptr() is not needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-snvs.c: remove redundant of_match_ptr
Sachin Kamat [Tue, 12 Nov 2013 23:10:57 +0000 (15:10 -0800)]
drivers/rtc/rtc-snvs.c: remove redundant of_match_ptr

The data structure of_match_ptr() protects is always compiled in.
Hence of_match_ptr() is not needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-sirfsoc.c: remove redundant of_match_ptr
Sachin Kamat [Tue, 12 Nov 2013 23:10:56 +0000 (15:10 -0800)]
drivers/rtc/rtc-sirfsoc.c: remove redundant of_match_ptr

The data structure of_match_ptr() protects is always compiled in.
Hence of_match_ptr() is not needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-omap.c: remove redundant of_match_ptr
Sachin Kamat [Tue, 12 Nov 2013 23:10:55 +0000 (15:10 -0800)]
drivers/rtc/rtc-omap.c: remove redundant of_match_ptr

The data structure of_match_ptr() protects is always compiled in.
Hence of_match_ptr() is not needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-vt8500.c: remove redundant of_match_ptr
Sachin Kamat [Tue, 12 Nov 2013 23:10:54 +0000 (15:10 -0800)]
drivers/rtc/rtc-vt8500.c: remove redundant of_match_ptr

The data structure of_match_ptr() protects is always compiled in.
Hence of_match_ptr() is not needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-v3020.c: use dev_get_platdata()
Jingoo Han [Tue, 12 Nov 2013 23:10:53 +0000 (15:10 -0800)]
drivers/rtc/rtc-v3020.c: use dev_get_platdata()

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to make
the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-sh.c: use dev_get_platdata()
Jingoo Han [Tue, 12 Nov 2013 23:10:52 +0000 (15:10 -0800)]
drivers/rtc/rtc-sh.c: use dev_get_platdata()

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to make
the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-rs5c348.c: use dev_get_platdata()
Jingoo Han [Tue, 12 Nov 2013 23:10:51 +0000 (15:10 -0800)]
drivers/rtc/rtc-rs5c348.c: use dev_get_platdata()

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to make
the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-pcf2123.c: use dev_get_platdata()
Jingoo Han [Tue, 12 Nov 2013 23:10:50 +0000 (15:10 -0800)]
drivers/rtc/rtc-pcf2123.c: use dev_get_platdata()

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to make
the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-m48t86.c: use dev_get_platdata()
Jingoo Han [Tue, 12 Nov 2013 23:10:44 +0000 (15:10 -0800)]
drivers/rtc/rtc-m48t86.c: use dev_get_platdata()

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to make
the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-m48t59.c: use dev_get_platdata()
Jingoo Han [Tue, 12 Nov 2013 23:10:44 +0000 (15:10 -0800)]
drivers/rtc/rtc-m48t59.c: use dev_get_platdata()

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to make
the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-ep93xx.c: use dev_get_platdata()
Jingoo Han [Tue, 12 Nov 2013 23:10:43 +0000 (15:10 -0800)]
drivers/rtc/rtc-ep93xx.c: use dev_get_platdata()

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to make
the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-ds2404.c: use dev_get_platdata()
Jingoo Han [Tue, 12 Nov 2013 23:10:42 +0000 (15:10 -0800)]
drivers/rtc/rtc-ds2404.c: use dev_get_platdata()

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to make
the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-ds1307.c: use dev_get_platdata()
Jingoo Han [Tue, 12 Nov 2013 23:10:41 +0000 (15:10 -0800)]
drivers/rtc/rtc-ds1307.c: use dev_get_platdata()

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to make
the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-ds1305.c: use dev_get_platdata()
Jingoo Han [Tue, 12 Nov 2013 23:10:40 +0000 (15:10 -0800)]
drivers/rtc/rtc-ds1305.c: use dev_get_platdata()

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to make
the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-da9055.c: use dev_get_platdata()
Jingoo Han [Tue, 12 Nov 2013 23:10:39 +0000 (15:10 -0800)]
drivers/rtc/rtc-da9055.c: use dev_get_platdata()

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to make
the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-cmos.c: use dev_get_platdata()
Jingoo Han [Tue, 12 Nov 2013 23:10:38 +0000 (15:10 -0800)]
drivers/rtc/rtc-cmos.c: use dev_get_platdata()

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to make
the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-88pm860x.c: use dev_get_platdata()
Jingoo Han [Tue, 12 Nov 2013 23:10:37 +0000 (15:10 -0800)]
drivers/rtc/rtc-88pm860x.c: use dev_get_platdata()

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to make
the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-88pm80x.c: use dev_get_platdata()
Jingoo Han [Tue, 12 Nov 2013 23:10:36 +0000 (15:10 -0800)]
drivers/rtc/rtc-88pm80x.c: use dev_get_platdata()

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.  This is a cosmetic change to make
the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-sirfsoc.c: remove unneeded casts of void*
Jingoo Han [Tue, 12 Nov 2013 23:10:35 +0000 (15:10 -0800)]
drivers/rtc/rtc-sirfsoc.c: remove unneeded casts of void*

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-vr41xx.c: fix checkpatch warnings
Sachin Kamat [Tue, 12 Nov 2013 23:10:34 +0000 (15:10 -0800)]
drivers/rtc/rtc-vr41xx.c: fix checkpatch warnings

Fixes the following warnings:
  WARNING: Use #include <linux/io.h> instead of <asm/io.h>
  WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-mrst.c: remove redundant dev_set_drvdata
Sachin Kamat [Tue, 12 Nov 2013 23:10:33 +0000 (15:10 -0800)]
drivers/rtc/rtc-mrst.c: remove redundant dev_set_drvdata

Driver core sets the driver data to NULL upon device_release or on probe
failure.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-cmos.c: remove redundant dev_set_drvdata
Sachin Kamat [Tue, 12 Nov 2013 23:10:32 +0000 (15:10 -0800)]
drivers/rtc/rtc-cmos.c: remove redundant dev_set_drvdata

Driver core sets the driver data to NULL upon device_release or on probe
failure.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-sirfsoc.c: use devm_rtc_device_register
Sachin Kamat [Tue, 12 Nov 2013 23:10:31 +0000 (15:10 -0800)]
drivers/rtc/rtc-sirfsoc.c: use devm_rtc_device_register

devm_rtc_device_register simplifies the code.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Xianglong Du <Xianglong.Du@csr.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-isl1208.c: use devm_* APIs
Sachin Kamat [Tue, 12 Nov 2013 23:10:30 +0000 (15:10 -0800)]
drivers/rtc/rtc-isl1208.c: use devm_* APIs

devm_* APIs are device managed and make code simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Herbert Valerio Riedel <hvr@gnu.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-at91rm9200.c: use devm_* APIs
Sachin Kamat [Tue, 12 Nov 2013 23:10:29 +0000 (15:10 -0800)]
drivers/rtc/rtc-at91rm9200.c: use devm_* APIs

devm_* APIs are device managed and make code simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-vt8500.c: fix return value
Sachin Kamat [Tue, 12 Nov 2013 23:10:28 +0000 (15:10 -0800)]
drivers/rtc/rtc-vt8500.c: fix return value

Propagate the return value from platform_get_irq() instead of hardcoding.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-max6900.c: remove redundant checks
Sachin Kamat [Tue, 12 Nov 2013 23:10:27 +0000 (15:10 -0800)]
drivers/rtc/rtc-max6900.c: remove redundant checks

i2c_smbus_write_byte_data() returns negative errno on failure or 0 on
success.  Return the value obtained from it directly.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-isl1208.c: remove redundant checks
Sachin Kamat [Tue, 12 Nov 2013 23:10:26 +0000 (15:10 -0800)]
drivers/rtc/rtc-isl1208.c: remove redundant checks

i2c_smbus_read_byte_data() returns negative errno on failure.  Return the
value obtained from it directly.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Herbert Valerio Riedel <hvr@gnu.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/rtc/rtc-ds1307.c: release irq on error
Sachin Kamat [Tue, 12 Nov 2013 23:10:25 +0000 (15:10 -0800)]
drivers/rtc/rtc-ds1307.c: release irq on error

'client->irq' was not released on error. Fix it.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/message/i2o/driver.c: add missing destroy_workqueue() on error in i2o_driver_...
Wei Yongjun [Tue, 12 Nov 2013 23:10:24 +0000 (15:10 -0800)]
drivers/message/i2o/driver.c: add missing destroy_workqueue() on error in i2o_driver_register()

Add the missing destroy_workqueue() before return from
i2o_driver_register() in the error handling case.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agokprobes: use KSYM_NAME_LEN to size identifier buffers
Joe Mario [Tue, 12 Nov 2013 23:10:23 +0000 (15:10 -0800)]
kprobes: use KSYM_NAME_LEN to size identifier buffers

Use KSYM_NAME_LEN to size identifier buffers, so that it can be easier
increased.

Signed-off-by: Joe Mario <jmario@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoinitramfs: read CONFIG_RD_ variables for initramfs compression
P J P [Tue, 12 Nov 2013 23:10:22 +0000 (15:10 -0800)]
initramfs: read CONFIG_RD_ variables for initramfs compression

When expert configuration option(CONFIG_EXPERT) is enabled, menuconfig
offers a choice of compression algorithm to compress initial ramfs image;
This choice is stored into CONFIG_RD_* variables.  But usr/Makefile uses
earlier INITRAMFS_COMPRESSION_* macros to build initial ramfs file.  Since
none of them is defined, resulting 'initramfs_data.cpio' file remains
un-compressed.

This patch updates the Makefile to use CONFIG_RD_* variables and adds
support for LZ4 compression algorithm.  Also updates the
'gen_initramfs_list.sh' script to check whether a selected compression
command is accessible or not.  And fall-back to default gzip(1)
compression when it is not.

Signed-off-by: P J P <prasad@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoinit: make init failures more explicit
Michael Opdenacker [Tue, 12 Nov 2013 23:10:21 +0000 (15:10 -0800)]
init: make init failures more explicit

This patch proposes to make init failures more explicit.

Before this, the "No init found" message didn't help much.  It could
sometimes be misleading and actually mean "No *working* init found".

This message could hide many different issues:
 - no init program candidates found at all
 - some init program candidates exist but can't be executed (missing
   execute permissions, failed to load shared libraries, executable
   compiled for an unknown architecture...)

This patch notifies the kernel user when a candidate init program is found
but can't be executed.  In each failure situation, the error code is
displayed, to quickly find the root cause.  "No init found" is also
replaced by "No working init found", which is more correct.

This will help embedded Linux developers (especially the newcomers),
regularly making and debugging new root filesystems.

Credits to Geert Uytterhoeven and Janne Karhunen for their improvement
suggestions.

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Janne Karhunen <Janne.Karhunen@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoinit/do_mounts_rd.c: fix NULL pointer dereference while loading initramfs
P J P [Tue, 12 Nov 2013 23:10:20 +0000 (15:10 -0800)]
init/do_mounts_rd.c: fix NULL pointer dereference while loading initramfs

Make menuconfig allows one to choose compression format of an initial
ramdisk image.  But this choice does not result in duly compressed initial
ramdisk image.  Because - $ make install - does not pass on the selected
compression choice to the dracut(8) tool, which creates the initramfs
file.  dracut(8) generates the image with the default compression, ie.
gzip(1).

If a user chose any other compression instead of gzip(1), it leads to a
crash due to NULL pointer dereference in crd_load(), caused by a NULL
function pointer returned by the 'decompress_method()' routine.  Because
the initramfs image is gzip(1) compressed, whereas the kernel knows only
to decompress the chosen format and not gzip(1).

This patch replaces the crash by an explicit panic() call with an
appropriate error message. This shall prevent the kernel from
eventually panicking in: init/do_mounts.c: mount_block_root() with
  -> panic("VFS: Unable to mount root fs on %s", b);

[akpm@linux-foundation.org: mention that the problem is with the ramdisk, don't print known-to-be-NULL value]
Signed-off-by: P J P <prasad@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoinit.h: document the existence of __initconst
Geert Uytterhoeven [Tue, 12 Nov 2013 23:10:19 +0000 (15:10 -0800)]
init.h: document the existence of __initconst

Initdata can be const since more than 5 years, using the __initconst
keyword.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoepoll: do not take global 'epmutex' for simple topologies
Jason Baron [Tue, 12 Nov 2013 23:10:18 +0000 (15:10 -0800)]
epoll: do not take global 'epmutex' for simple topologies

When calling EPOLL_CTL_ADD for an epoll file descriptor that is attached
directly to a wakeup source, we do not need to take the global 'epmutex',
unless the epoll file descriptor is nested.  The purpose of taking the
'epmutex' on add is to prevent complex topologies such as loops and deep
wakeup paths from forming in parallel through multiple EPOLL_CTL_ADD
operations.  However, for the simple case of an epoll file descriptor
attached directly to a wakeup source (with no nesting), we do not need to
hold the 'epmutex'.

This patch along with 'epoll: optimize EPOLL_CTL_DEL using rcu' improves
scalability on larger systems.  Quoting Nathan Zimmer's mail on SPECjbb
performance:

"On the 16 socket run the performance went from 35k jOPS to 125k jOPS.  In
addition the benchmark when from scaling well on 10 sockets to scaling
well on just over 40 sockets.

...

Currently the benchmark stops scaling at around 40-44 sockets but it seems like
I found a second unrelated bottleneck."

[akpm@linux-foundation.org: use `bool' for boolean variables, remove unneeded/undesirable cast of void*, add missed ep_scan_ready_list() kerneldoc]
Signed-off-by: Jason Baron <jbaron@akamai.com>
Tested-by: Nathan Zimmer <nzimmer@sgi.com>
Cc: Eric Wong <normalperson@yhbt.net>
Cc: Nelson Elhage <nelhage@nelhage.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoepoll: optimize EPOLL_CTL_DEL using rcu
Jason Baron [Tue, 12 Nov 2013 23:10:16 +0000 (15:10 -0800)]
epoll: optimize EPOLL_CTL_DEL using rcu

Nathan Zimmer found that once we get over 10+ cpus, the scalability of
SPECjbb falls over due to the contention on the global 'epmutex', which is
taken in on EPOLL_CTL_ADD and EPOLL_CTL_DEL operations.

Patch #1 removes the 'epmutex' lock completely from the EPOLL_CTL_DEL path
by using rcu to guard against any concurrent traversals.

Patch #2 remove the 'epmutex' lock from EPOLL_CTL_ADD operations for
simple topologies.  IE when adding a link from an epoll file descriptor to
a wakeup source, where the epoll file descriptor is not nested.

This patch (of 2):

Optimize EPOLL_CTL_DEL such that it does not require the 'epmutex' by
converting the file->f_ep_links list into an rcu one.  In this way, we can
traverse the epoll network on the add path in parallel with deletes.
Since deletes can't create loops or worse wakeup paths, this is safe.

This patch in combination with the patch "epoll: Do not take global 'epmutex'
for simple topologies", shows a dramatic performance improvement in
scalability for SPECjbb.

Signed-off-by: Jason Baron <jbaron@akamai.com>
Tested-by: Nathan Zimmer <nzimmer@sgi.com>
Cc: Eric Wong <normalperson@yhbt.net>
Cc: Nelson Elhage <nelhage@nelhage.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
CC: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agocheckpatch: add check for sscanf without return use
Joe Perches [Tue, 12 Nov 2013 23:10:15 +0000 (15:10 -0800)]
checkpatch: add check for sscanf without return use

Naked use sscanf can be troublesome because the pointed to variables may
not have been set.

Add a warning when the sscanf return value is not used.

For now, do not add __must_check to the sscanf prototype because that will
cause a couple of hundred new warnings when compiling a kernel.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agocheckpatch: don't require kernel style __attribute__ shortcuts in uapi paths
Joe Perches [Tue, 12 Nov 2013 23:10:14 +0000 (15:10 -0800)]
checkpatch: don't require kernel style __attribute__ shortcuts in uapi paths

Avoid prescribing kernel styled shortcuts for gcc extensions of
__attribute__((foo)) in the uapi include paths.

Fix $realfile filename when using -f/--file to not remove first level
directory as if the filename was used in a -P1 patch.  Only strip the
first level directory (typically a or b) for P1 patches.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Dixit, Ashutosh" <ashutosh.dixit@intel.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agocheckpatch: improve "return is not a function" test
Joe Perches [Tue, 12 Nov 2013 23:10:13 +0000 (15:10 -0800)]
checkpatch: improve "return is not a function" test

Find a few more cases where parentheses are used around the value of a
return statement.

This now uses the "$balanced_parens" test and also makes the test depend
on perl v5.10 and higher.

This now finds return with parenthesis uses the old code did not find
like:

ERROR: return is not a function, parentheses are not required
#211: FILE: arch/m68k/include/asm/sun3xflop.h:211:
+ return ((error == 0) ? 0 : -1);

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: David Cohen <david.a.cohen@linux.intel.com>
Acked-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agocheckpatch.pl: check for the FSF mailing address
Josh Triplett [Tue, 12 Nov 2013 23:10:12 +0000 (15:10 -0800)]
checkpatch.pl: check for the FSF mailing address

Kernel maintainers reject new instances of the GPL boilerplate paragraph
directing people to write to the FSF for a copy of the GPL, since the FSF
has moved in the past and may do so again.

Make this an error for new code, but just a --strict CHK in --file mode;
anyone interested in doing tree-wide cleanups of this form can enable this
test explicitly.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agocheckpatch: make the memory barrier test noisier
Joe Perches [Tue, 12 Nov 2013 23:10:11 +0000 (15:10 -0800)]
checkpatch: make the memory barrier test noisier

Peter Zijlstra prefers that comments be required near uses of memory
barriers.

Change the message level for memory barrier uses from a --strict test only
to a normal WARN so it's always emitted.

This might produce false positives around insertions of memory barriers
when a comment is outside the patch context block.

And checkpatch is still stupid, it only looks for existence of any
comment, not at the comment content.

Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agocheckpatch: add rules to check init attribute and const defects
Joe Perches [Tue, 12 Nov 2013 23:10:10 +0000 (15:10 -0800)]
checkpatch: add rules to check init attribute and const defects

People get this regularly wrong and it breaks the LTO builds, as it causes
a section attribute conflict.

Add --fix capability too.

Based on a patch from Andi Kleen.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agocheckpatch: add test for #defines of ARCH_HAS_<foo>
Joe Perches [Tue, 12 Nov 2013 23:10:09 +0000 (15:10 -0800)]
checkpatch: add test for #defines of ARCH_HAS_<foo>

Add a test for these #defines

Additionally, moved string_find_replace sub as it screws up subsequent
formatting when placed inside another sub.

Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agocheckpatch: find CamelCase definitions of struct/union/enum
Joe Perches [Tue, 12 Nov 2013 23:10:08 +0000 (15:10 -0800)]
checkpatch: find CamelCase definitions of struct/union/enum

Checkpatch doesn't currently find CamelCase definitions of structs, unions
or enums.

Add that ability.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agocheckpatch: update seq_<foo> tests
Joe Perches [Tue, 12 Nov 2013 23:10:07 +0000 (15:10 -0800)]
checkpatch: update seq_<foo> tests

seq_vprintf, seq_printf and seq_puts are logging functions and should be
allowed to exceed the maximium line length.

Add maximum line length exceptions for these functions.

Also, suggesting seq_printf conversions to seq_puts should be tested for
arguments after the format.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agocheckpatch: extend CamelCase types and ignore existing CamelCase uses in a patch
Joe Perches [Tue, 12 Nov 2013 23:10:06 +0000 (15:10 -0800)]
checkpatch: extend CamelCase types and ignore existing CamelCase uses in a patch

Extend the CamelCase words found to include structure members.

In https://lkml.org/lkml/2013/9/3/318 Sarah Sharp (mostly) wrote:

"In general, if checkpatch.pl complains about a variable a patch
introduces that's CamelCase, you should pay attention to it.  Otherwise,
[] ignore it."

So, if checking a patch, scan the original patched file if it's available
and add any preexisting CamelCase types so reuses do not generate
CamelCase messages.

That also means Andrew's not so cruelly spurned anymore.
https://lkml.org/lkml/2013/2/22/426

Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agocheckpatch: report missing spaces around trigraphs with --strict
Joe Perches [Tue, 12 Nov 2013 23:10:05 +0000 (15:10 -0800)]
checkpatch: report missing spaces around trigraphs with --strict

Spaces around trigraphs are specified by CodingStyle but checkpatch is
currently silent about them because there are many current instances
without them.

Make missing spaces around trigraphs a --strict message.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodebugfs: use list_next_entry() in debugfs_remove_recursive()
Oleg Nesterov [Tue, 12 Nov 2013 23:10:04 +0000 (15:10 -0800)]
debugfs: use list_next_entry() in debugfs_remove_recursive()

Change debugfs_remove_recursive() to use list_next_entry(child), no
changes in generated code.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agolist: introduce list_last_entry(), use list_{first,last}_entry()
Oleg Nesterov [Tue, 12 Nov 2013 23:10:03 +0000 (15:10 -0800)]
list: introduce list_last_entry(), use list_{first,last}_entry()

We already have list_first_entry(), it makes sense to also add
list_last_entry() for consistency.  And we use both helpers in
list_for_each_*().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agolist: change list_for_each_entry*() to use list_*_entry()
Oleg Nesterov [Tue, 12 Nov 2013 23:10:02 +0000 (15:10 -0800)]
list: change list_for_each_entry*() to use list_*_entry()

Now that we have list_{next,prev}_entry() we can change
list_for_each_entry*() and list_safe_reset_next() to use the new helpers
to improve the readability.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agolist: introduce list_next_entry() and list_prev_entry()
Oleg Nesterov [Tue, 12 Nov 2013 23:10:01 +0000 (15:10 -0800)]
list: introduce list_next_entry() and list_prev_entry()

Add two trivial helpers list_next_entry() and list_prev_entry(), they
can have a lot of users including list.h itself.  In fact the 1st one is
already defined in events/core.c and bnx2x_sp.c, so the patch simply
moves the definition to list.h.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agosound/soc/pxa/mmp-pcm.c: use gen_pool_dma_alloc() to allocate dma buffer
Nicolin Chen [Tue, 12 Nov 2013 23:10:00 +0000 (15:10 -0800)]
sound/soc/pxa/mmp-pcm.c: use gen_pool_dma_alloc() to allocate dma buffer

Since gen_pool_dma_alloc() is introduced, we implement it to simplify code.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agosound/soc/davinci/davinci-pcm.c: use gen_pool_dma_alloc() in davinci-pcm.c
Nicolin Chen [Tue, 12 Nov 2013 23:09:58 +0000 (15:09 -0800)]
sound/soc/davinci/davinci-pcm.c: use gen_pool_dma_alloc() in davinci-pcm.c

Since gen_pool_dma_alloc() is introduced, we implement it to simplify code.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/uio/uio_pruss.c: use gen_pool_dma_alloc() to allocate sram memory
Nicolin Chen [Tue, 12 Nov 2013 23:09:57 +0000 (15:09 -0800)]
drivers/uio/uio_pruss.c: use gen_pool_dma_alloc() to allocate sram memory

Since gen_pool_dma_alloc() is introduced, we implement it to simplify code.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Cc: "Hans J. Koch" <hjk@hansjkoch.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/media/platform/coda.c: use gen_pool_dma_alloc() to allocate iram buffer
Nicolin Chen [Tue, 12 Nov 2013 23:09:56 +0000 (15:09 -0800)]
drivers/media/platform/coda.c: use gen_pool_dma_alloc() to allocate iram buffer

Since gen_pool_dma_alloc() is introduced, we implement it to simplify code.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agodrivers/dma/mmp_tdma.c: use gen_pool_dma_alloc() to allocate descriptor
Nicolin Chen [Tue, 12 Nov 2013 23:09:55 +0000 (15:09 -0800)]
drivers/dma/mmp_tdma.c: use gen_pool_dma_alloc() to allocate descriptor

Since gen_pool_dma_alloc() is introduced, we implement it to simplify code.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoarch/arm/mach-davinci/sram.c: use gen_pool_dma_alloc() to sram.c
Nicolin Chen [Tue, 12 Nov 2013 23:09:54 +0000 (15:09 -0800)]
arch/arm/mach-davinci/sram.c: use gen_pool_dma_alloc() to sram.c

Since gen_pool_dma_alloc() is introduced, we implement it to simplify code.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agolib/genalloc: add a helper function for DMA buffer allocation
Nicolin Chen [Tue, 12 Nov 2013 23:09:52 +0000 (15:09 -0800)]
lib/genalloc: add a helper function for DMA buffer allocation

When using pool space for DMA buffer, there might be duplicated calling of
gen_pool_alloc() and gen_pool_virt_to_phys() in each implementation.

Thus it's better to add a simple helper function, a compatible one to the
common dma_alloc_coherent(), to save some code.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Cc: "Hans J. Koch" <hjk@hansjkoch.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agolib/digsig.c: use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...))
Duan Jiong [Tue, 12 Nov 2013 23:09:51 +0000 (15:09 -0800)]
lib/digsig.c: use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...))

Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Cc: James Morris <james.l.morris@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agolib/vsprintf.c: document formats for dentry and struct file
Olof Johansson [Tue, 12 Nov 2013 23:09:50 +0000 (15:09 -0800)]
lib/vsprintf.c: document formats for dentry and struct file

Looks like these were added to Documentation/printk-formats.txt but
not the in-file table.

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agolib/debugobjects.c: remove unnecessary work pending test
Xie XiuQi [Tue, 12 Nov 2013 23:09:49 +0000 (15:09 -0800)]
lib/debugobjects.c: remove unnecessary work pending test

Remove unnecessary work pending test before calling schedule_work().  It
has been tested in queue_work_on() already.  No functional changed.

Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>